EN European Norm Tests Part 56

EN Standards are European Standards. These standards specify requirements for a particular item, material, component, system or service, or describe in detail a particular method or procedure, and tests are performed accordingly.

• EN 10051 : 1991+A1 : 1997 ; Continuous hot rolled uncoated plate, sheet and strip of unalloyed and alloyed steels. Size and shape tolerances.
• EN 10051: 2010; Continuous hot-rolled strip and plate/sheet cutting from wide strip of unalloyed and alloyed steels. Size and shape tolerances.
• EN 10052 : 1994 ; Glossary of heat treatment terms for ferrous products.
• EN 10055: 1996; Hot rolled steel, radiused root and toes with equal flange threads. Dimensions and tolerances for shapes and dimensions.
• EN 10056-1: 1999; Specification for equal and unequal angles of structural steel. Dimensions
• EN 10056-2: 1993; Specification for equal and unequal angles of structural steel. Shape and size tolerances
• EN 10067: 1997; Hot rolled bulb flats. Dimensions and tolerances regarding shape, dimensions and mass.
• EN 10071: 1991; Chemical analysis of ferrous materials. Determination of manganese in steels and irons. Electrometric titration method.
• EN 10071: 2012; Chemical analysis of ferrous materials. Determination of manganese in steels and irons. Electrometric titration method.
• EN 10080: 2005; Steel for concrete reinforcement. Weldable reinforcing steel. General.
• EN 10083-1 : 1991 ; Quenched and tempered steels. Technical delivery conditions for special steels
• EN 10083-1: 2006; Steels for quenching and tempering. General technical delivery conditions
• EN 10083-2: 1991; Quenched and tempered steels. Technical delivery conditions for non-alloy grade steels
• EN 10083-2: 2006; Steels for quenching and tempering. Technical delivery conditions for non-alloy steels
• EN 10083-3: 1996; Quenched and tempered steels. Technical delivery conditions for boron steels
• EN 10083-3: 2006; Steels for quenching and tempering. Technical delivery conditions for alloy steels
• EN 10084: 1998; Hardening steels. Technical delivery conditions.
• EN 10084: 2008; Hardening steels. Technical delivery conditions.
• EN 10085: 2001; Nitriding steel. Technical delivery conditions.
• EN 10087: 1999; Free cutting steels. Technical delivery conditions for semi-finished products, hot rolled bars and bars.
• EN 10088-1: 1995; Stainless steels. List of stainless steels
• EN 10088-1: 2005; Stainless steels. List of stainless steels
• EN 10088-1: 2014; Stainless steels. List of stainless steels
• EN 10088-2: 1995; Stainless steels. Technical delivery conditions for sheet/plate and strip for general purposes
• EN 10088-2: 2005; Stainless steels. Technical delivery conditions for corrosion resistant steel sheet/plate and strip for general purposes
• EN 10088-2: 2014; Stainless steels. Technical delivery conditions for corrosion resistant steel sheet/plate and strip for general purposes
• EN 10088-3: 1995; Stainless steels. Technical delivery conditions for general purpose semi-finished products, bars, rods and sections
• EN 10088-3: 2005; Stainless steels. Technical delivery conditions for semi-finished products, bars, rods, wire, profiles and bright products of general-purpose corrosion-resistant steels
• EN 10088-3: 2014; Stainless steels. Technical delivery conditions for semi-finished products, bars, rods, wire, profiles and bright products of general-purpose corrosion-resistant steels
• EN 10088-4: 2009; Stainless steels. Technical delivery conditions for corrosion resistant steel sheet/plate and strip for construction purposes
• EN 10088-5: 2009; Stainless steels. Technical delivery conditions for rods, rods, wire, profiles and bright products of corrosion-resistant steels for construction purposes
• EN 10090: 1998; Valve steels and alloys for internal combustion engines.
• EN 10106: 1996; Cold rolled non-oriented electric steel sheet and strip, delivered fully machined.
• EN 10106: 2007; Cold rolled non-oriented electric steel sheet and strip, delivered fully machined.
• EN 10106: 2015; Cold rolled non oriented electrical steel strip and sheet is delivered in fully machined condition.
• EN 10107: 1996; Grain oriented electric steel sheet and strip delivered in fully machined condition.
• EN 10107: 2005; Grain oriented electric steel sheet and strip delivered in fully machined condition.
• EN 10107: 2014; Grain oriented electrical steel strip and plate delivered in fully machined condition.
• EN 10109-1: 1996; Metallic materials. Hardness test. Rockwell test (A, B, C, D, E, F, G, H, K scales) and Rockwell surface test (15 N, 30 N, 45 N, 15 T, 30 T and 45 T scales)
• EN 10109-2: 1996; Metallic materials. Hardness test. Verification of Rockwell hardness testers (A, B, C, D, E, F, G, H, K, N, T scales)
• EN 10109-3: 1996; Metallic materials. Hardness test. Calibration of standardized blocks to be used for Rockwell hardness testing machines (A, B, C, D, E, F, G, H, K, N, T scales)
• EN 10111: 1998; Continuous hot rolled low carbon steel sheet and strip for cold forming. Technical delivery conditions.
• EN 10111: 2008; Continuous hot rolled low carbon steel sheet and strip for cold forming. Technical delivery conditions.
• EN 10113-1: 1993; Hot rolled products in weldable fine grain structural steels. General delivery conditions
• EN 10113-2: 1993; Hot rolled products in weldable fine grain structural steels. Delivery conditions for normalized/normalized rolled steels
• EN 10113-3: 1993; Hot rolled products in weldable fine grain structural steels. Delivery conditions for thermomechanical rolled steels
• EN 10120: 1997; Steel sheet and strip for welded gas cylinders.
• EN 10120: 2008; Steel sheet and strip for welded gas cylinders.
• EN 10126: 1996; Cold rolled electrified non-alloy steel sheet and strip, delivered in semi-finished form.
• EN 10130: 1991; Characteristics of cold rolled low carbon steel flat products for cold forming: technical delivery conditions.
• EN 10130: 1999; Cold rolled low carbon steel flat products for cold forming. Technical delivery conditions.
• EN 10130: 2006; Cold rolled low carbon steel flat products for cold forming. Technical delivery conditions.
• EN 10131: 1991; Cold rolled, uncoated low carbon and high yield strength steel flats for cold forming. Size and shape tolerances.
• EN 10131: 2006; Cold rolled uncoated and zinc or zinc-nickel electrolytically coated low carbon and high yield strength steel flat products for cold forming. Size and shape tolerances.
• EN 10132-1 : 2000 ; Cold rolled narrow steel strip for heat treatment. Technical delivery conditions. general
• EN 10132-2: 2000; Cold rolled narrow steel strip for heat treatment. Technical delivery conditions. Hardening steels
• EN 10132-3: 2000; Cold rolled narrow steel strip for heat treatment. Technical delivery conditions. Steels for quenching and tempering
• EN 10132-4:2000; Cold rolled narrow steel strip for heat treatment. Technical delivery conditions. Spring steels and other applications
• EN 10136: 1991; Chemical analysis of ferrous materials. Determination of nickel in steel and iron. Flame atomic absorption spectrometric method.
• EN 10137-1: 1996; Plates and wide flat products made of high yield strength structural steels in quenched and tempered or precipitation hardened conditions. General delivery conditions
• EN 10137-2: 1996; Plates and wide flat products made of high yield strength structural steels in quenched and tempered or precipitation hardened conditions. Delivery conditions for quenched and tempered steels
• EN 10137-3: 1996; Plates and wide flat products made of high yield strength structural steels in quenched and tempered or precipitation hardened conditions. Delivery conditions for precipitation hardened steels
• EN 10139: 1998; Cold rolled uncoated mild steel narrow strip for cold forming. Technical delivery conditions.
• EN 10139: 2016; Cold rolled, uncoated low carbon steel narrow strip for cold forming. Technical delivery conditions.
• EN 10140: 1997; Cold rolled narrow steel strip. Size and shape tolerances.
• EN 10140: 2006; Cold rolled narrow steel strip. Size and shape tolerances.
• EN 10142: 2000; Continuous hot dip zinc coated low carbon steels strip and sheet for cold forming. Technical delivery conditions.
• EN 10143: 1993; Continuous hot-dip metal-clad steel sheet and strip. Size and shape tolerances.
• EN 10143: 2006; Steel sheet and strip with continuous hot dip coating. Size and shape tolerances.
• EN 10147: 1992; Specification for continuous hot dip zinc coated structural steel sheet and strip. Technical delivery conditions.
• EN 10147: 2000; Continuous hot-dip zinc-coated structural steels strip and sheet. Technical delivery conditions.
• EN 10149-1: 1996; Specification for hot rolled flat products made of high yield strength steels for cold forming. General delivery conditions
• EN 10149-1: 2013; Hot rolled flat products made of high yield strength steels for cold forming. General technical delivery conditions
• EN 10149-2: 1996; Specification for hot rolled flat products made of high yield strength steels for cold forming. Delivery conditions for thermomechanically rolled steels
• EN 10149-2: 2013; Hot rolled flat products made of high yield strength steels for cold forming. Technical delivery conditions for thermomechanically rolled steels
• EN 10149-3: 1996; Specification for hot rolled flat products made of high yield strength steels for cold forming. Delivery conditions for normalized or normalized rolled steel
• EN 10149-3: 2013; Hot rolled flat products made of high yield strength steels for cold forming. Technical delivery conditions for normalized or normalized rolled steel
• EN 10152 : 1994 ; Specification for electrolytically zinc-coated cold-rolled steel flats. Technical delivery conditions.
• EN 10152: 2009; Electrolytically zinc-coated cold rolled steel flat products for cold forming. Technical delivery conditions.
• EN 10154: 1996; Continuous hot-dip aluminium-silicon (AS) coated steel strip and sheet. Technical delivery conditions.
• EN 10155: 1993; Structural steels with improved atmospheric corrosion resistance. Technical delivery conditions.
• EN 10160: 1999; Ultrasonic testing of flat steel product with thickness equal to or greater than 6 mm (reflection method).
• EN 10163-1: 1991; Specification for delivery requirements for the surface condition of hot rolled steel plates, large flats and sections. General Requirements
• EN 10163-2: 1991; Specification for delivery requirements for the surface condition of hot rolled steel plates, large flats and sections. Plates and wide circles
• EN 10163-3: 1991; Specification for delivery requirements for the surface condition of hot rolled steel plates, large flats and sections. chapters
• EN 10164: 1993; Steel products with improved deformation properties perpendicular to the product surface. Technical delivery conditions.
• EN 10165: 1996; Cold rolled electric alloy steel sheet and strip, delivered in semi-finished form.
• EN 10169-1: 1997; Steel flat products with a continuous organic coating (coil coating). General information (definitions, materials, tolerances, test methods)
• EN 10169-2: 2006; Steel flat products with a continuous organic coating (coil coating). Products for building exterior applications
• EN 10169 : 2010+A1 : 2012 ; Steel flat products with a continuous organic coating (coil coating). Technical delivery conditions.
• EN 10184 : 1992 ; Specification for chemical analysis of ferrous materials. Determination of phosphorus in steel and iron. Spectrophotometric method.
• EN 10184 : 2006 ; Chemical analysis of ferrous materials. Determination of phosphorus in non-alloyed steels and irons. Molybdenum blue spectrophotometric method.
• EN 10200 : 1992 ; Chemical analysis of ferrous materials. Determination of boron in steel. Spectrophotometric method.
• EN 10200: 2012; Chemical analysis of ferrous materials. Determination of boron in steels. Spectrophotometric method.
• EN 10202: 1990; Specification for cold reduced electrolytic chromium/chromium oxide coated steel.
• EN 10202: 2001; Cold reduced tin products. Electrolytic tin and electrolytic chromium/chromium oxide coated steel.
• EN 10203: 1991; Specification for cold reduced electrolytic tin.
• EN 10204: 1991; Metallic products. Audit document types.
• EN 10205: 1992; Cold reduced black plate specification in coil form for the production of tin or electrolytic chromium/chromium oxide coated steel.
• EN 10205: 2016; Cold reduced tin products. Black plate.

Standards facilitate international trade by ensuring compatibility and interoperability of components, products and services. European Standards (ENs) are documents approved by three European Standardization Organizations (ESO), CEN, CENELEC or ETSI; Recognized as competent in the field of voluntary technical standardization for EU Regulation 1025/2012.