EN European Norm Tests Part 142

EN Standards are European Standards. These standards specify requirements for a particular item, material, component, system or service, or describe in detail a particular method or procedure, and tests are performed accordingly.

• EN 61076-1: 1996; Quality rated connectors for use in DC, low frequency analog and digital high speed data applications. General specification
• EN 61076-1: 2006; Connectors for electronic equipment. Product requirements. General specification
• EN 61076-2: 1999; Quality rated connectors for use in DC, low frequency analog and digital high speed data applications. Circular connectors of rated quality. section properties
• EN 61076-2: 2011; Connectors for electronic equipment. Product requirements. Section specifications for circular connectors
• EN 61076-3: 2000; Quality rated connectors for use in DC, low frequency analog and digital high speed data applications. Rectangular connectors of rated quality. section properties
• EN 61076-3 : 2008 ; Connectors for electronic equipment. Product requirements. rectangular connectors. section properties
• EN 61076-4: 1997; Quality rated connectors for use in DC, low frequency analog and digital high speed data applications. Section properties. Printed card connectors
• EN 61076-2-001: 2011; Connectors for electronic equipment. Product requirements. circular connectors. Empty detail property
• EN 61076-2-101: 2012; Connectors for electronic equipment. Product requirements. circular connectors. Detail specifications for screw-lock M12 connectors
• EN 61076-2-104 : 2008 ; Connectors for electronic equipment. Product requirements. circular connectors. Detail specifications for circular connectors with M8 screw or snap lock
• EN 61076-2-104 : 2014 ; Connectors for electronic equipment. Product requirements. circular connectors. Detail specifications for circular connectors with M8 screw or snap lock
• EN 61076-2-105: 2008; Connectors for electronic equipment. Product requirements. circular connectors. Detail specifications for screw-lock M5 connectors
• EN 61076-2-106: 2011; Connectors for electronic equipment. Product requirements. circular connectors. Detail specifications for M 40 x 65 connectors with screw locking and degree of protection IP67 or IP16/0,75
• EN 61076-2-107 : 2010 ; Connectors for electronic equipment. Product requirements. Detailed specifications for circular hybrid connectors M12 with screw-lock electrical and fiber optic contacts
• EN 61076-2-109: 2014; Connectors for electronic equipment. Product requirements. circular connectors. Detail specifications for M 500 × 12 screw-lock connectors for data transmission frequencies up to 1 MHz
• EN 61076-3-001 : 2008 ; Connectors for electronic equipment. Product requirements. rectangular connectors. Empty detail property
• EN 61076-3-101: 1997; Quality rated connectors for use in DC, low frequency analog and digital high speed data applications. rectangular connectors. Detail specifications for a set of shielded connectors with trapezoidal shells and non-removable rectangular contacts on the 1,27mm x 2,54mm centerline
• EN 61076-3-104 : 2006 ; Connectors for electronic equipment. Product requirements. Detail specifications for 1000-way, shielded free and fixed connectors for data transmission at frequencies up to 8 MHz
• EN 61076-3-106 : 2006 ; Connectors for electronic equipment. Product requirements. rectangular connectors. Detailed specifications for protective enclosures for use with 60603-way shielded and unshielded connectors for industrial environments with IEC 7-8 series interface
• EN 61076-3-110 : 2008 ; Connectors for electronic equipment. Product requirements. rectangular connectors. Detail specifications for shielded, free and fixed connectors for data transmission at frequencies up to 1000 MHz
• EN 61076-3-110 : 2012 ; Connectors for electronic equipment. Product requirements. Detail specifications for shielded, free and fixed connectors for data transmission at frequencies up to 1000 MHz
• EN 61076-3-110: 2016; Connectors for electronic equipment. Product requirements. Detail specifications for free and fixed connectors for data transmission at frequencies up to 3 000 MHz
• EN 61076-3-112 : 2006 ; Connectors for electronic equipment. rectangular connectors
• EN 61076-3-114 : 2009 ; Connectors for electronic equipment. Product requirements. rectangular connectors. Detailed specification for protective enclosures for use with 60603-way shielded and unshielded connectors for frequencies up to 7 MHz for industrial environments incorporating the IEC 600-8 series interface. variant 61076 related to IEC 3-106-11; Bayonet coupling type
• EN 61076-3-115 : 2010 ; Connectors for electronic equipment. Product requirements. rectangular connectors. Detailed specifications for protective enclosures for use with 60603-way shielded and unshielded connectors for frequencies up to 7 MHz for industrial environments incorporating the IEC 600-8 series interface. Variant 61076 related to IEC 3-106-12; push-pull type
• EN 61076-3-116 : 2008 ; Connectors for electronic equipment. Product requirements. rectangular connectors. Detailed specifications for protective enclosures for use with 60603-way shielded and unshielded connectors for frequencies up to 7 MHz for industrial environments incorporating the IEC 600-8 series interface. IEC 61076-3-106 related variant 13 ; locking lever
• EN 61076-3-117 : 2009 ; Connectors for electronic equipment. Product requirements. rectangular connectors. Detailed specifications for protective enclosures for use with 60603-way shielded and unshielded connectors for industrial environments incorporating the IEC 7-8 series interface. Variant 61076 of IEC 3-106-14; push-pull coupling
• EN 61076-3-118 : 2010 ; Connectors for electronic equipment. Product requirements. rectangular connectors. Detail specification for 4-pole + PE power connector with push-pull coupling
• EN 61076-4-001: 1997; Quality rated connectors for use in DC, low frequency analog and digital high speed data applications. Printed card connectors. Empty detail property
• EN 61076-4-100: 1998; Quality rated connectors for use in DC, low frequency analog and digital high speed data applications. Printed card connectors. Detail specifications for two-piece connector modules with 2,5 mm (0,098 inch) grid for printed boards and back panels
• EN 61076-4-100 : 1998; , IEC 61076-4-100 : 1994, QC 480301XX0001 : 1994
• EN 61076-4-101: 1998; Quality rated connectors for use in DC, low frequency analog and digital high speed data applications. Printed card connectors. Detail specification for two-piece connector modules with a 60917 mm basic grid for printed cards and backgrounds according to IEC 2,0
• EN 61076-4-101 : 1998; , IEC 61076-4-101 : 1995, QC 480301XX0002 : 1995
• EN 61076-4-102 : 1997 ; Quality rated connectors for use in DC, low frequency analog and digital high speed data applications. Printed card connectors. Detail specification for two-piece single-pole connectors for multiple use in plug-in units with a metric grid conforming to IEC 60917 with pre-centering, coding and early-matching
• EN 61076-4-103 : 1999 ; Quality rated connectors for use in DC, low frequency analog and digital high speed data applications. Printed card connectors. Detail specifications for two-piece connectors with shield and 2,5mm basic grille
• EN 61076-4-104 : 1999 ; Connectors for electronic equipment. Printed board connectors of rated quality. Detail specifications for two-piece modular connectors, 2,0mm basic grid, 0,5mm multi-grid terminations
• EN 61076-4-105: 1998; Quality rated connectors for use in DC, low frequency analog and digital high speed data applications. Printed card connectors. Detail specifications for a 3mm circular connector with 8 to 9 contacts for use in a wide variety of applications including the telecommunications and audio industry
• EN 61076-4-105 : 1998; , IEC 61076-4-105 : 1995, QC 480301XX0006 : 1995
• EN 61076-4-116 : 2012+A1 : 2016 ; Connectors for electronic equipment. Product requirements. Printed card connectors. Detail specifications for a high-speed two-piece connector with integrated shielding functionality
• EN 61076-7-100 : 2006 ; Connectors for electronic equipment. Product requirements. Cable outlet accessories. Detail specifications for a metric cable seal consisting of an integral part of heavy-duty rectangular or circular connector heads and a sealing system
• EN 61077: 1992; Specification for a helical scan videocassette system using 12,65 mm (0,5 inch) magnetic tape of the VHS type. Compact VHS videotape.
• EN 61078 : 1994 ; Reliability of systems, equipment and components. Block diagram technique guide.
• EN 61078 : 2006 ; Analysis techniques for reliability. Reliability block diagram and Boolean methods.
• EN 61079-1 : 1995 ; Measurement methods in receivers for satellite broadcast transmissions in the 12 GHz band. Radio frequency measurements in outdoor units
• EN 61079-2: 1995; Measurement methods in receivers for satellite broadcast transmissions in the 12 GHz band. Electrical measurements on DBS tuner units
• EN 61079-3: 1995; Measurement methods in receivers for satellite broadcast transmissions in the 12 GHz band. Electrical measurements of overall performance of receiver systems consisting of an outdoor unit and a DBS tuner unit
• EN 61079-5: 1995; Measurement methods in receivers for satellite broadcast transmissions in the 12 GHz band. Electrical measurements on decoder units for MAC/packet systems
• EN 61082-1: 1993; Preparation of documents used in electrotechnology. General Requirements
• EN 61082-1 ​​: 2006 ; Preparation of documents used in electrotechnology. Charter
• EN 61082-1 ​​: 2015 ; Preparation of documents used in electrotechnology. Charter
• EN 61082-2 : 1994 ; Preparation of documents used in electrotechnology. Function-oriented diagrams
• EN 61082-3 : 1994 ; Preparation of documents used in electrotechnology.. Connection diagrams, tables and lists
• EN 61082-4: 1996; Preparation of documents used in electrotechnology. Location and installation documents
• EN 61083-1: 1993; Digital recorders for measurements in high voltage impact tests. Requirements for digital recorders
• EN 61083-2: 1997; Digital recorders for measurements in high-voltage impact tests. Evaluation of software used to parameterize pulse waveforms
• EN 61083-2: 2013; Tools and software used for measurement in high voltage and high current tests. Software requirements for tests with impulse voltages and currents
• EN 61086-1: 1995; Specifications for loaded printed wire sheets (conformal coatings). Definitions, classification and general requirements
• EN 61086-2: 1995; Specifications for loaded printed wire sheets (conformal coatings). test methods
• EN 61086-3-1: 1995; Specifications for loaded printed wire sheets (conformal coatings). Coatings (conformal coatings) for loaded printed wire sheets. Specifications for individual materials. Coatings for general purpose (class I) and high reliability (class II)
• EN 61094-1 : 1995 ; Specifications for measuring microphones. Specifications for laboratory standard microphones
• EN 61094-1: 2001; Specifications for measuring microphones. Specifications for laboratory standard microphones
• EN 61094-2 : 1994 ; Specifications for measuring microphones. Primary method for pressure calibration of laboratory standard microphones with reciprocity technique
• EN 61094-2: 2009; Electroacoustic. Measurement microphones. Primary method for pressure calibration of laboratory standard microphones with reciprocity technique
• EN 61094-3: 1996; Specifications for measuring microphones. Primary method for free field calibration of laboratory standard microphones with the reciprocity technique
• EN 61094-3: 2016; Electroacoustic. Measurement microphones. Primary method for free field calibration of laboratory standard microphones with the reciprocity technique
• EN 61094-4: 1996; Specifications for measuring microphones. Specifications for working standard microphones
• EN 61094-5: 2016; Electroacoustic. Measurement microphones. Methods for pressure calibration of comparatively operating standard microphones
• EN 61094-6: 2005; Measurement microphones. Electrostatic actuators for determination of frequency response
• EN 61094-8: 2012; Electroacoustic. Measurement microphones. Methods for determining the free-field sensitivity of working standard microphones by comparison
• EN 61095 : 1993 ; Characteristics of electromechanical contactors for household and similar purposes.
• EN 61095: 2009; Electromechanical contactors for household and similar purposes.
• EN 61096: 1993; Methods of measuring the characteristics of reproduction equipment for digital audio compact discs.
• EN 61097-1 : 1993 ; Global maritime distress and safety system (GMDSS). Radar transmitter. Marine search and rescue (SART). Operational and performance requirements, test methods and required test results
• EN 61097-1 : 2007 ; Global maritime distress and safety system (GMDSS). Radar transmitter. Marine search and rescue (SART). Operational and performance requirements, test methods and required test results
• EN 61097-14 : 2010 ; Global maritime distress and safety system (GMDSS). AIS search and rescue transmitter (AIS-SART). Operational and performance requirements, test methods and required test results
• EN 61098: 2007; Radiation protection instrumentation. Installed personnel surface contamination monitoring devices.
• EN 61099: 1992; Specification for synthetic organic esters not used for electrical purposes.
• EN 61099: 2010; Insulating fluids. Specifications for synthetic organic esters not used for electrical purposes.
• EN 61100: 1993; Classification of insulating fluids according to fire point and net calorific value.
• EN 61101: 1994; Specification for absolute calibration of hydrophones using planar scanning technique in the frequency range 0,5 MHz to 15 MHz.
• EN 61102: 1994; Specification for measurement and characterization of ultrasonic fields using hydrophones in the frequency range 0 MHz to 5 MHz.
• EN 61105: 1994; Specification for reference tapes for video tape recorder systems.
• EN 61106: 1993; video discs. Measurement methods for parameters.
• EN 61107: 1992; Data exchange for meter reading, tariff and load control. Direct local data exchange.
• EN 61107: 1996; Data exchange for meter reading, tariff and load control. Direct local data exchange.
• EN 61108-1: 1996; Global navigation satellite systems (GNSS). Global positioning system (GPS). Receiver equipment. Performance standards, test methods and required test results
• EN 61108-2: 1998; Global navigation satellite systems (GNSS). Global navigation satellite systems (GLONASS). Receiver equipment. Performance standards, test methods and required test results
• EN 61108-3: 2010; Marine navigation and radiocommunication equipment and systems. Global navigation satellite systems (GNSS). Galileo receiver equipment. Performance requirements, test methods and required test results
• EN 61109: 2008; Insulators for overhead lines. Composite suspension and voltage isolators for ac systems with rated voltage greater than 1000 V. Definitions, test methods and acceptance criteria.
• EN 61110 : 1992 ; System Omega and differential Omega receivers for ships. operational and performance requirements. Test methods and necessary test results.
• EN 61111: 2009; Live work. Electrical insulation blanket.
• EN 61112: 2009; Live work. Electrically insulated blankets.
• EN 61114-1: 1995; Measurement methods in receiving antennas for satellite broadcast transmissions in the 12 GHz band. Electrical measurements on DBS receiving antennas
• EN 61114-1: 1999; Measurement methods in receiving antennas for satellite broadcast transmissions in the 12 GHz band. electrical measurements
• EN 61114-2: 1997; Measurement methods in receiving antennas for satellite broadcast transmissions in the 12 GHz band. Mechanical and environmental tests on individual and collective receiving antennas
• EN 61115 : 1994 ; Expression of the performance of sample processing systems for process analyzers.
• EN 61116: 1995; Electromechanical equipment manual for small hydroelectric installations.
• EN 61118: 1994; Specification for helical scan videotape cassette system using 12,65 mm (0,5 inch) magnetic tape. Type M2 ;
• EN 61119-1 : 1994 ; Digital audio tape cassette system (DAT). Dimensions and features
• EN 61119-2: 1994; Digital audio tape cassette system (DAT). DAT calibration tape

Standards facilitate international trade by ensuring compatibility and interoperability of components, products and services. European Standards (ENs) are documents approved by three European Standardization Organizations (ESO), CEN, CENELEC or ETSI; Recognized as competent in the field of voluntary technical standardization for EU Regulation 1025/2012.