EN European Norm Tests Part 140

EN Standards are European Standards. These standards specify requirements for a particular item, material, component, system or service, or describe in detail a particular method or procedure, and tests are performed accordingly.

• EN 60999-1 : 2000 ; Connecting devices. Electrical copper conductors. Safety requirements for screw and screwless type clamping units. General requirements and special requirements for clamping units for conductors from 0,2mm$u2 to 35mm$u2 (included)
• EN 60999 : 1993 ; Connecting devices. Safety requirements for screw type and screwless type clamping units for electrical copper conductors.
• EN 61000-1-2: 2016; Electromagnetic compatibility (EMC). General. Methodology for ensuring the functional safety of electrical and electronic systems, including equipment related to electromagnetic phenomena
• EN 61000-2-4: 1995; Electromagnetic compatibility (EMC). Environment. Compliance levels in industrial plants for low frequency conducted disturbances
• EN 61000-2-9: 1996; Electromagnetic compatibility (EMC). Environment. Description of the HEMP environment. Widespread discomfort. Basic EMC broadcast
• EN 61000-2-10: 1999; Electromagnetic compatibility (EMC). Environment. Description of the HEMP environment. Reported discomfort
• EN 61000-3-2: 1995; Electromagnetic compatibility (EMC). Limits. Limits for harmonic current emissions (equipment input current 3L 16 A per phase)
• EN 61000-3-2: 2001; Electromagnetic compatibility (EMC). Limits. Limits for harmonic current emissions (equipment input current up to and including 16 A per phase)
• EN 61000-3-2 : 2006+A2 : 2009 ; Electromagnetic compatibility (EMC). Limits. Limits for harmonic current emissions (equipment input current 3L 16 A per phase)
• EN 61000-3-2: 2014; Electromagnetic compatibility (EMC). Limits. Limits for harmonic current emissions (equipment input current 3L 16 A per phase)
• EN 61000-3-3 : 1995+A2 : 2005 ; Electromagnetic compatibility (EMC). Limits. Limitation of voltage variations, voltage fluctuations and flicker in public low-voltage supply systems for equipment with a rated current of 3L 16 A per phase and not subject to conditional connection
• EN 61000-3-3: 2008; Electromagnetic compatibility (EMC). Limits. Limitation of voltage variations, voltage fluctuations and flicker in public low-voltage supply systems for equipment with a rated current of 3L 16 A per phase and not subject to conditional connection
• EN 61000-3-3: 2013; Electromagnetic compatibility (EMC). Limits. Limitation of voltage variations, voltage fluctuations and flicker in public low-voltage supply systems for equipment with a rated current of 3L 16 A per phase and not subject to conditional connection
• EN 61000-3-11: 2001; Electromagnetic compatibility (EMC). Limits. Limitation of voltage variations, voltage fluctuations and flicker in public low-voltage supply systems. Equipment with a rated voltage current of 3L 75 A and subject to conditional connection
• EN 61000-3-12: 2005; Electromagnetic compatibility (EMC). limits
• EN 61000-3-12: 2011; Electromagnetic compatibility (EMC). Limits. Limits for harmonic currents generated by equipment connected to general low voltage systems with input current > 16 A and $75 A per phase
• EN 61000-4-1: 1995; Electromagnetic compatibility (EMC). Test and measurement techniques. Overview of immunoassays. Basic EMC broadcast
• EN 61000-4-1: 2007; Electromagnetic compatibility (EMC). Test and measurement techniques. Overview of the IEC 61000-4 series
• EN 61000-4-2: 1995; Electromagnetic compatibility (EMC). Test and measurement techniques. Electrostatic discharge immunity test. Basic EMC broadcast
• EN 61000-4-2: 2009; Electromagnetic compatibility (EMC). Test and measurement techniques. Electrostatic discharge immunity test
• EN 61000-4-3: 1997; Electromagnetic compatibility (EMC). Test and measurement techniques
• EN 61000-4-3 : 2006+A2 : 2010 ; Electromagnetic compatibility (EMC). Test and measurement techniques. Radiated, radio frequency, electromagnetic field immunity test
• EN 61000-4-4: 1995; Electromagnetic compatibility (EMC). Test and measurement techniques. Electrical fast transient/burst immunity test. Basic EMC broadcast
• EN 61000-4-4 : 2004+A1 : 2010 ; Electromagnetic compatibility (EMC). Test and measurement techniques. Electrical fast transient/burst immunity test
• EN 61000-4-4: 2012; Electromagnetic compatibility (EMC). Test and measurement techniques. Electrical fast transient/burst immunity test
• EN 61000-4-5: 1995; Electromagnetic compatibility (EMC). Test and measurement techniques. Surge immunity test
• EN 61000-4-5: 2006; Electromagnetic compatibility (EMC). Test and measurement techniques
• EN 61000-4-5: 2014; Electromagnetic compatibility (EMC). Test and measurement techniques. Surge immunity test
• EN 61000-4-6: 1996; Electromagnetic compatibility (EMC). Test and measurement techniques. Immunity to conducted disturbances caused by radio frequency fields
• EN 61000-4-6: 2007; Electromagnetic compatibility (EMC). Test and measurement techniques. Immunity to conducted disturbances caused by radio frequency fields
• EN 61000-4-6: 2009; Electromagnetic compatibility (EMC). Test and measurement techniques. Immunity to conducted disturbances caused by radio frequency fields
• EN 61000-4-6: 2014; Electromagnetic compatibility (EMC). Test and measurement techniques. Immunity to conducted disturbances caused by radio frequency fields
• EN 61000-4-7: 1993; Electromagnetic compatibility (EMC). General guidance on harmonics and interharmonic measurements and instrumentation for power supply systems and connected equipment
• EN 61000-4-8 : 1994 ; Electromagnetic compatibility (EMC). Test and measurement techniques. Power frequency magnetic field immunity test. Basic EMC broadcast
• EN 61000-4-8: 2010; Electromagnetic compatibility (EMC). Test and measurement techniques. Power frequency magnetic field immunity test
• EN 61000-4-9 : 1994 ; Electromagnetic compatibility (EMC). Test and measurement techniques. Pulse magnetic field immunity test. Basic EMC broadcast
• EN 61000-4-9: 2016; Electromagnetic compatibility (EMC). Test and measurement techniques. Pulse magnetic field immunity test
• EN 61000-4-10 : 1994 ; Electromagnetic compatibility (EMC). Test and measurement techniques. Damped oscillating magnetic field immunity test. Basic EMC broadcast
• EN 61000-4-11 : 1994 ; Electromagnetic compatibility (EMC). Test and measurement techniques. Voltage dips, short interruptions and voltage fluctuations immunity tests
• EN 61000-4-12: 1996; Electromagnetic compatibility (EMC). Test and measurement techniques. Oscillatory waves immunity test. Basic EMC broadcast
• EN 61000-4-12: 2006; Electromagnetic compatibility (EMC). Test and measurement techniques. ring wave immunity test
• EN 61000-4-14 : 1999+A2 : 2009 ; Electromagnetic compatibility (EMC). Test and measurement techniques. Voltage surge immunity test for equipment with input current not exceeding 16 A per phase
• EN 61000-4-15: 1998; Electromagnetic compatibility (EMC). Test and measurement techniques. Vibration meter. Functional and design features. Basic EMC broadcast
• EN 61000-4-15: 2011; Electromagnetic compatibility (EMC). Test and measurement techniques. Vibration meter. Functional and design features
• EN 61000-4-16 : 1998+A2 : 2011 ; Electromagnetic compatibility (EMC). Test and measurement techniques. Test for immunity to transmitted, common mode disturbances in the frequency range 0 Hz to 150 kHz
• EN 61000-4-16: 2016; Electromagnetic compatibility (EMC). Test and measurement techniques. Test for immunity to transmitted, common mode disturbances in the frequency range 0 Hz to 150 kHz
• EN 61000-4-17 : 1999+A2 : 2009 ; Electromagnetic compatibility (EMC). Test and measurement techniques. Surge in DC input power port immunity test
• EN 61000-4-18 : 2007+A1 : 2010 ; Electromagnetic compatibility (EMC). Test and measurement techniques. Damped oscillating wave immunity test
• EN 61000-4-19: 2014; Electromagnetic compatibility (EMC). Test and measurement techniques. Test immunity to differential mode disturbances and signaling transmitted in the 2 kHz to 150 kHz frequency range on AC power ports
• EN 61000-4-20: 2010; Electromagnetic compatibility (EMC). Test and measurement techniques. Emission and immunity testing in transverse electromagnetic (TEM) waveguides
• EN 61000-4-21: 2011; Electromagnetic compatibility (EMC). Test and measurement techniques. Echo chamber test methods
• EN 61000-4-22: 2011; Electromagnetic compatibility (EMC). Test and measurement techniques. Radiated emission and immunity measurements in completely anechoic chambers (FARs)
• EN 61000-4-23 : 2001 ; Electromagnetic compatibility (EMC). Test and measurement techniques. Test methods for protective devices for HEMP and other radiated disturbances
• EN 61000-4-24: 1997; Electromagnetic compatibility (EMC). Test and measurement techniques. Test methods for protective devices for HEMP-conducted degradation. Basic EMC broadcast
• EN 61000-4-27 : 2000+A1 : 2009 ; Electromagnetic compatibility (EMC). Test and measurement techniques. Unbalance, immunity test for equipment with input current not exceeding 16 A per phase
• EN 61000-4-28 : 2000+A2 : 2009 ; Electromagnetic compatibility (EMC). Test and measurement techniques. Variation of power frequency, immunity test for equipment with input current not exceeding 16 A per phase
• EN 61000-4-30: 2009; Electromagnetic compatibility (EMC). Test and measurement techniques. Power quality measurement methods
• EN 61000-4-30: 2015; Electromagnetic compatibility (EMC). Test and measurement techniques. Power quality measurement methods
• EN 61000-5-5: 1996; Electromagnetic compatibility (EMC). Installation and mitigation instructions. Characteristics of protective devices for HEMP transmitted degradation. Basic EMC broadcast
• EN 61000-6-1: 2007; Electromagnetic compatibility (EMC). General standards. Immunity for residential, commercial and light industrial environments
• EN 61000-6-2: 1999; Electromagnetic compatibility (EMC). General standards. Immunity for industrial environments
• EN 61000-6-2: 2005; Electromagnetic compatibility (EMC). general standards
• EN 61000-6-3 : 2007+A1 : 2011 ; Electromagnetic compatibility (EMC). General standards. Emissions standard for residential, commercial and light industrial environments
• EN 61000-6-4 : 2007+A1 : 2011 ; Electromagnetic compatibility (EMC). General standards. Emission standard for industrial environments
• EN 61000-6-7: 2015; Electromagnetic compatibility (EMC). General standards. Immunity requirements for equipment intended to perform functions in a safety-related system (functional safety) in industrial locations
• EN 61000-4-34 : 2007+A1 : 2009 ; Electromagnetic compatibility (EMC). Test and measurement techniques. Voltage dips, short interruptions and voltage fluctuations immunity tests for equipment with mains current greater than 16 A per phase
• EN 61003-1: 1993; Industrial process control systems. Devices with analog inputs and two- or multi-state outputs. Performance evaluation methods
• EN 61003-2: 2009; Industrial process control systems. Devices with analog inputs and two- or multi-state outputs. Guidance for inspection and routine testing
• EN 61006: 1993; Test methods for determining the glass transition temperature of electrical insulating materials.
• EN 61008-1 : 1995 ; Specification for residual current operated circuit breakers without integrated overcurrent protection for household and similar uses (RCCBs). general rules
• EN 61008-1 : 2004+A13 : 2012 ; Residual current-operated circuit breakers without integrated overcurrent protection for household and similar uses (RCCBs). general rules
• EN 61008-1 : 2012+A11 : 2015 ; Residual current-operated circuit breakers without integrated overcurrent protection for household and similar uses (RCCBs). general rules
• EN 61008-2-1: 1995; Specification for residual current operated circuit breakers without integrated overcurrent protection for household and similar uses (RCCBs). Applicability of general rules to functionally independent RCCBs from line voltage
• EN 61009-1 : 1995 ; Electrical accessories. Residual current-operated circuit breakers with integrated overcurrent protection for household and similar uses (RCBOs). general rules
• EN 61009-1 : 2004+A14 : 2012 ; Residual current-operated circuit breakers with integrated overcurrent protection for household and similar uses (RCBOs). general rules
• EN 61009-1 : 2012+A12 : 2016 ; Residual current-operated circuit breakers with integrated overcurrent protection for household and similar uses (RCBOs). general rules
• EN 61009-2-1: 1995; Specification for residual current-operated circuit breakers with integrated overcurrent protection for household and similar uses (RCBOs). Applicability of the general rules to RCBOs that are functionally independent of line voltage
• EN 61010-1: 1993; Safety requirements for electrical equipment for measurement, control and laboratory use. General Requirements
• EN 61010-1: 2010; Safety requirements for electrical equipment for measurement, control and laboratory use. General Requirements
• EN 61010-031: 2015; Safety requirements for electrical equipment for measurement, control and laboratory use. Safety requirements for hand-held probe assemblies for electrical measurement and testing
• EN 61010-2-010: 1995; Safety requirements for electrical equipment for measurement, control and laboratory use. Special requirements for laboratory equipment for heating materials
• EN 61010-2-010: 2014; Safety requirements for electrical equipment for measurement, control and laboratory use. Special requirements for laboratory equipment for heating materials
• EN 61010-2-012: 2016; Safety requirements for electrical equipment for measurement, control and laboratory use. Special requirements for climatic and environmental testing and other temperature conditioning equipment
• EN 61010-2-020: 1995; Safety requirements for electrical equipment for measurement, control and laboratory use. Special requirements for laboratory centrifuges
• EN 61010-2-020: 2006; Safety requirements for electrical equipment for measurement, control and laboratory use. Special requirements for laboratory centrifuges
• EN 61010-2-030: 2010; Safety requirements for electrical equipment for measurement, control and laboratory use. Special requirements for testing and measuring circuits
• EN 61010-2-031: 1995; Safety requirements for electrical equipment for measurement, control and laboratory use. Special requirements for hand-held probe assemblies for electrical measurement and testing
• EN 61010-2-032: 1995; Safety requirements for electrical equipment for measurement, control and laboratory use. Special requirements for hand held current clamps for electrical measurement and testing
• EN 61010-2-032: 2012; Safety requirements for electrical equipment for measurement, control and laboratory use. Special requirements for hand-held and hand-held current sensors for electrical testing and measurement
• EN 61010-2-033: 2012; Safety requirements for electrical equipment for measurement, control and laboratory use. Special requirements for handheld multimeters and other meters capable of measuring mains voltage, for domestic and professional use
• EN 61010-2-040: 2005; Safety requirements for electrical equipment for measurement, control and laboratory use. Special requirements for sterilizers and washer-disinfectors used to handle medical supplies
• EN 61010-2-040: 2015; Safety requirements for electrical equipment for measurement, control and laboratory use. Special requirements for sterilizers and washer-disinfectors used to handle medical supplies
• EN 61010-2-041: 1997; Safety requirements for electrical equipment for measurement, control and laboratory use. Special requirements for autoclaves and laboratory processes using steam for the processing of medical supplies
• EN 61010-2-042: 1997; Safety requirements for electrical equipment for measurement, control and laboratory use. Special requirements for autoclaves and sterilizers using toxic gas for the processing of medical supplies and laboratory processes
• EN 61010-2-043: 1998; Safety requirements for electrical equipment for measurement, control and laboratory use. Special requirements for dry heat sterilizers using either hot air or hot inert gas for the processing of medical supplies and laboratory processes
• EN 61010-2-051: 1996; Safety requirements for electrical equipment for measurement, control and laboratory use. Special requirements for laboratory equipment for mechanical mixing and mixing
• EN 61010-2-051: 2015; Safety requirements for electrical equipment for measurement, control and laboratory use. Special requirements for laboratory equipment for mixing and mixing
• EN 61010-2-061: 1996; Safety requirements for electrical equipment for measurement, control and laboratory use. Special requirements for laboratory atomic spectrometers with thermal atomization and ionization
• EN 61010-2-061: 2015; Safety requirements for electrical equipment for measurement, control and laboratory use. Special requirements for laboratory atomic spectrometers with thermal atomization and ionization
• EN 61010-2-081: 2015; Safety requirements for electrical equipment for measurement, control and laboratory use. Special requirements for automated and semi-automatic laboratory equipment for analysis and other purposes

Standards facilitate international trade by ensuring compatibility and interoperability of components, products and services. European Standards (ENs) are documents approved by three European Standardization Organizations (ESO), CEN, CENELEC or ETSI; Recognized as competent in the field of voluntary technical standardization for EU Regulation 1025/2012.