EN European Norm Tests Part 113

EN Standards are European Standards. These standards specify requirements for a particular item, material, component, system or service, or describe in detail a particular method or procedure, and tests are performed accordingly.

• EN 50310: 2010; Equipotential bonding and grounding application in buildings equipped with information technology.
• EN 50310: 2016; Telecommunications networks for buildings and other structures.
• EN 50317 : 2012 ; Railway applications. Current collection systems. Requirements and verification for measurements of dynamic interaction between pantograph and overhead contact line.
• EN 50319 : 1999 ; Proximity devices. Requirements for proximity devices with analog output.
• EN 50320: 2001; Digital audio broadcasting system. Properties of the DAB instruction set for receivers (DCSR).
• EN 50321 : 2000 ; Electrically insulating shoes for working in low voltage installations.
• EN 50325-5: 2010; Industrial communication subsystem based on ISO 11898 (CAN) for controller-device interfaces. Functional safety communication based on EN 50325-4
• EN 50332-1: 2013; Audio equipment : Headphones and headphones associated with personal music players. Maximum sound pressure level measurement methodology. General method for “one-pack equipment”
• EN 50332-2: 2013; Audio equipment : Headphones and headphones associated with personal music players. Maximum sound pressure level measurement methodology. Pairing sets with headphones if either or both are offered separately or as a single package of equipment, but with standard connectors that allow combining components from different manufacturers or different designs between the two
• EN 50333: 2001; Audio, video and similar electronic devices. Routine electrical safety tests in production.
• EN 50338: 2001; Safety of home and similar electrical appliances. Special requirements for pedestrian-controlled, battery-powered electric lawnmowers.
• EN 50338: 2006; Safety of home and similar electrical appliances. Special requirements for pedestrian-controlled, battery-powered electric lawnmowers.
• EN 50340: 2010; Hydraulic cable cutters. Devices to be used in electrical installations with rated voltage up to AC 30 kV.
• EN 50341-1 : 2012 ; Overhead power lines exceeding AC 1 kV. General Requirements. Common features
• EN 50341-2-4: 2016; Overhead power lines exceeding AC 1 kV. National Normative Aspects (NNA) for Germany (according to EN 50341-1 : 2012)
• EN 50341-2-7 : 2015 ; Overhead power lines exceeding AC 1 kV. National Normative Aspects (NNA) for FINLAND (according to EN 50341-1 : 2012)
• EN 50341-2-9 : 2015 ; Overhead power lines exceeding AC 1 kV. National Normative Aspects (NNA) for Great Britain and Northern Ireland (according to EN 50341-1 : 2012)
• EN 50341-2-19 : 2015 ; Overhead power lines exceeding AC 1 kV. National Normative Aspects (NNA) for the CZECH REPUBLIC (according to EN 50341-1 : 2012)
• EN 50341-2-20 : 2015 ; Overhead power lines exceeding AC 45 kV. National Normative Aspects (NNA) for ESTONIA (according to EN 50341-1 : 2012)
• EN 50341-2-22: 2016; Overhead power lines exceeding AC 1 kV. National Normative Aspects (NNA) for Poland (according to EN 50341-1 : 2012)
• EN 50341-2-23: 2016; Overhead power lines exceeding AC 1 kV. National Normative Aspects (NNA) for SLOVAKIA (according to EN 50341-1 : 2012)
• EN 50342-1 : 2006+A1 : 2011 ; Lead acid starter batteries. General requirements and test methods
• EN 50342-2 : 2007+A1 : 2014 ; Lead acid starter batteries. Dimensions of batteries and marking of terminals
• EN 50342-3 : 2008 ; Lead acid starter batteries. Terminal system for batteries with 36 V nominal voltage
• EN 50342-4 : 2009 ; Lead acid starter batteries. Battery dimensions for heavy vehicles
• EN 50342-5 : 2010 ; Lead acid starter batteries. Features of battery slots and handles
• EN 50342-7 : 2015 ; Lead acid starter batteries. General requirements and test methods for motorcycle batteries
• EN 50343: 2014; Railway applications. Wheeled vehicle. Rules for wiring installation.
• EN 50345: 2009; Railway applications. Fixed installations. Electric traction. Insulating synthetic rope assemblies for supporting overhead contact lines.
• EN 50348 : 2010 ; Stationary electrostatic application equipment for non-flammable liquid coating material. Security requirements.
• EN 50355 : 2013 ; Railway applications. Railway wagon cables with special fire performance. User guide.
• EN 50363-0: 2005; Insulation, jacketing and coating materials for low voltage energy cables. general promotion
• EN 50363-0: 2011; Insulation, jacketing and coating materials for low voltage energy cables. general promotion
• EN 50363-1: 2005; Insulation, jacketing and coating materials for low voltage energy cables. Cross-linked elastomeric insulating compounds
• EN 50363-3 : 2005+A1 : 2011 ; Insulation, jacketing and coating materials for low voltage energy cables. PVC insulation compounds
• EN 50363-5 : 2005+A1 : 2011 ; Insulation, jacketing and coating materials for low voltage energy cables. Halogen-free, cross-linked insulating compounds
• EN 50363-6 : 2005+A1 : 2011 ; Insulation, jacketing and coating materials for low voltage energy cables. Halogen-free, cross-linked coating compounds
• EN 50363-7: 2005; Insulation, jacketing and coating materials for low voltage energy cables. Halogen-free, thermoplastic insulation compounds
• EN 50363-8 : 2005+A1 : 2011 ; Insulation, jacketing and coating materials for low voltage energy cables. Halogen-free, thermoplastic coating compounds
• EN 50363-2-1 : 2005+A1 : 2011 ; Insulation, jacketing and coating materials for low voltage energy cables. Cross-linked elastomeric coating compounds
• EN 50363-2-2: 2005; Insulation, jacketing and coating materials for low voltage energy cables. Cross-linked elastomeric coating compounds
• EN 50363-4-1: 2005; Insulation, jacketing and coating materials for low voltage energy cables. PVC coating compounds
• EN 50363-4-2 : 2005 ; Insulation, jacketing and coating materials for low voltage energy cables. PVC coating compounds
• EN 50363-9-1 : 2005 ; Insulation, jacketing and coating materials for low voltage energy cables. Various insulating compounds. Cross-linked polyvinyl chloride (XLPVC)
• EN 50363-10-1 : 2005 ; Insulation, jacketing and coating materials for low voltage energy cables. Various coating compounds. Cross-linked polyvinyl chloride (XLPVC)
• EN 50363-10-2 : 2005 ; Insulation, jacketing and coating materials for low voltage energy cables. Various coating compounds. Thermoplastic polyurethane
• EN 50364 : 2010 ; Limiting human exposure to electromagnetic fields from devices operating in the 0 Hz to 300 GHz frequency range used in electronic equipment surveillance (EAS), radio frequency identification (RFID) and similar applications.
• EN 50367 : 2006 ; Railway applications. Current collection systems. Technical criteria for interaction between pantograph and overhead line (to provide free access).
• EN 50367 : 2012 ; Railway applications. Current collection systems. Technical criteria for interaction between pantograph and overhead line (to provide free access).
• EN 50369 : 2005 ; Liquid tight sheath systems for cable management.
• EN 50370-1: 2005; Electromagnetic compatibility (EMC). The product family standard for machine tools. Emission
• EN 50377-14-1 : 2011 ; Connector sets and interconnection components to be used in fiber optic communication systems. Product features. IEC 60793-2-50 single-mode category B1;1 and B1;3 fiber cables for category C
• EN 50377-15-1 : 2011 ; Connector sets and interconnect components to be used in fiber optic communication systems. Product features. MPO Type with 50 fiber PPS ring terminated in IEC 125-60793 category A2a multimode fiber for 1/12 micron multimode fiber
• EN 50377-16-1 : 2011 ; Connector sets and interconnection components to be used in fiber optic communication systems. Product features. Single mode fiber with titanium composite ferrule for Type LF60793 APC simplex, category C terminated on IEC 2-50-1 categories B1;1 and B3;3
• EN 50377-17-1 : 2013 ; Connector sets and interconnect components to be used in fiber optic communication systems. Product features. Type FPFT (factory polished field termination) single-sided connector is factory terminated with EN 60793-2-50 category B1;3 fiber and field mounted on IEC 60793-2-50 category B1;3 or B6a_1 or B6a_2 singlemode fiber, category C
• EN 50377-2-2: 2009; Connector sets and interconnection components to be used in fiber optic communication systems. Product features. FC/APC 8, IEC 60793-2-50 in category B1;1 and B1;3 single-mode fiber, with full zirconia ring, terminated in category C
• EN 50377-13-2: 2011; Connector sets and interconnection components to be used in fiber optic communication systems. Product features. Type LX.5-PC DUPLEX, IEC 60793-2-50 category B1;1 and B1;3 terminated on single mode fiber, with full zirconia ferrule category U
• EN 50377-17-2 : 2015 ; Connector sets and Interconnect components to be used in fiber optic communication systems. Product features. Type FPFT (factory polished field termination) single-sided connector is factory terminated with EN 60793-2-50 category B1;3 fiber and IEC 60793-2-50 category B1;3 or B6a1 or B6a 2 single mode fiber (restricted MFD), category C
• EN 50377-3-1 : 2008 ; Connector sets and interconnection components to be used in fiber optic communication systems. Product features. Type SG terminated on equivalent multimode fiber for IEC 60793-2-10 category A1a, A1b or category C
• EN 50377-13-3: 2011; Connector sets and interconnect components to be used in fiber optic communication systems. Product features. Type LX.5-APC DUPLEX terminated on IEC 60793-2-50 category B1;1 and B1;3 single mode fiber, with full zirconia ferrule category U
• EN 50377-4-2: 2011; Connector sets and interconnection components to be used in fiber optic communication systems. Product features. Type SC/APC simplex 8^D, B1;1 and B1;3 single-mode fiber terminated in IEC 60793-2-50, with full zirconia ring category U
• EN 50377-4-4: 2011; Connector sets and interconnect components to be used in fiber optic communication systems. Product features. SC-PC type unidirectional, category U with full zirconia ring terminated in IEC 60793-2-50 category B1;1 and B1;3 single-mode fiber
• EN 50377-6-2: 2007; Connector sets and interconnect components to be used in fiber optic communication systems. Product features. SC-RJ singlemode terminated in IEC 60793-2-50 category B1;1 and B1;3 single-mode fiber, category U
• EN 50377-7-4: 2011; Connector sets and interconnect components to be used in fiber optic communication systems. Product features. IEC 60793-2-50 LC-PC simplex terminated in category B1;1 and B1;3 single mode fiber, with full zirconia ring for category C
• EN 50377-8-2 : 2007 ; Connector sets and interconnect components to be used in fiber optic communication systems. Product features. IEC 60793-2-50 category B1;1 and B1;3 single-mode fiber terminated in LSH-APC type unidirectional, composite ferrule category C
• EN 50377-8-3: 2007; Connector sets and interconnection components to be used in fiber optic communication systems. Product features. IEC 60793-2-50 category B1;1 and B1;3 single mode fiber, LSH-PC unidirectional terminated in composite ferrule category C
• EN 50377-8-4: 2007; Connector sets and interconnect components to be used in fiber optic communication systems. Product features. LSH-APC unidirectional composite ferrule category U terminated on IEC 60793-2-50 category B1;1 and B1;3 single-mode fiber
• EN 50377-8-5 : 2007 ; Connector sets and interconnection components to be used in fiber optic communication systems. Product features. LSH-PC unidirectional composite ferrule category U terminated on IEC 60793-2-50 category B1;1 and B1;3 single-mode fiber
• EN 50377-8-6 : 2007 ; Connector sets and interconnect components to be used in fiber optic communication systems. Product features. LSH-HR simplex terminated in IEC 60793-2-50 category B1;1 and B1;3 single mode fiber, full zirconia ferrule category C
• EN 50377-8-7:2007; Connector sets and interconnection components to be used in fiber optic communication systems. Product features. LSH-PC terminated with full zirconia ferrule category C in IEC 60793-2-50 category B1;1 and B1;3 single mode fiber
• EN 50377-8-8 : 2007 ; Connector sets and interconnect components to be used in fiber optic communication systems. Product features. LSH-APC simplex terminated in IEC 60793-2-50 category B1;1 and B1;3 single mode fiber, with full zirconia ferrule category U
• EN 50377-8-9 : 2007 ; Connector sets and interconnection components to be used in fiber optic communication systems. Product features. LSH-PC simplex terminated in IEC 60793-2-50 category B1;1 and B1;3 single mode fiber, with full zirconia ferrule category U
• EN 50377-8-10 : 2010 ; Connector sets and interconnection components to be used in fiber optic communication systems. Product features. Single mode fiber with titanium composite ferrule for Type LSH-APC simplex, category C terminated on IEC 60793-2-50 categories B1;1 and B1;3
• EN 50377-8-11 : 2010 ; Connector sets and interconnection components to be used in fiber optic communication systems. Product features. Type LSH-PC unidirectional terminated in IEC 60793-2-50 categories B1;1 and B1;3, single mode fiber with titanium composite ferrule for category C
• EN 50377-8-12 : 2010 ; Connector sets and interconnection components to be used in fiber optic communication systems. Product features. Single mode fiber with titanium composite ring for Type LSH-APC simplex, category U terminated in IEC 60793-2-50 categories B1;1 and B1;3
• EN 50377-8-13 : 2010 ; Connector sets and interconnection components to be used in fiber optic communication systems. Product features. Single mode fiber with titanium composite ferrule for Type LSH-PC simplex, category U terminated in IEC 60793-2-50 categories B1;1 and B1;3
• EN 50377-10-1: 2007; Connector sets and interconnect components to be used in fiber optic communication systems. Product features. IEC 60793-2-50 category B1;1 and B1;3 single-mode fiber terminated in MU-PC type unidirectional, category C with full zirconia ferrule
• EN 50377-10-2: 2005; Connector sets and interconnect components to be used in optical fiber communication systems. Product features. MU/APC single mode terminated in IEC 60793-2 category B1 fiber
• EN 50377-11-1 : 2008 ; Connector sets and interconnection components to be used in fiber optic communication systems. Product features. Type MF terminated in IEC 60793-2-50 category B1;1 and B1;3 single mode fiber for category C
• EN 50378-3-1: 2007; Passive components to be used in optical fiber communication systems. Product features. Type 60793/2 GHz DWDM module terminated in IEC 50-1-1 category B1;3 and B100;200 single mode fiber
• EN 50378-3-2: 2007; Passive components to be used in optical fiber communication systems. Product features. Type 60793/2 channel CWDM module terminated in IEC 50-1-1 category B1;3 and B4;8 single-mode fiber
• EN 50379-1 : 2004 ; Specification for portable electrical appliances designed to measure combustion flue gas parameters of heating appliances. General requirements and test methods
• EN 50379-1 : 2012 ; Specification for portable electrical appliances designed to measure combustion flue gas parameters of heating appliances. General requirements and test methods
• EN 50379-2 : 2012 ; Specification for portable electrical appliances designed to measure combustion flue gas parameters of heating appliances. Performance requirements for apparatus used in regulatory audits and evaluation
• EN 50379-3 : 2012 ; Specification for portable electrical appliances designed to measure combustion flue gas parameters of heating appliances. Performance requirements for apparatus used in the illegal service of gas-fired heating appliances
• EN 50381 : 2004 ; Portable ventilated rooms with or without an internal evacuation source.
• EN 50382-1 : 2008+A1 : 2013 ; Railway applications. Railway wagons high temperature power cables with special fire performance. General Requirements
• EN 50382-2 : 2008+A1 : 2013 ; Railway applications. Railway wagons high temperature power cables with special fire performance. Single core silicone rubber insulated cables for 120 ^DC or 150 ^DC
• EN 50383 : 2010 ; Basic standard for calculation and measurement of electromagnetic field strength and SAR for human exposure from radio base stations and fixed terminal stations for wireless telecommunications systems (110 MHz – 40 GHz).
• EN 50386 : 2010+A1 : 2013 ; Bushings for liquid filled transformers up to 1 kV and 250 A to 5 kA.
• EN 50388 : 2005 ; Railway applications. Power supply and wagons. Technical criteria for coordination between power supply (substation) and rolling stock to ensure interoperability.
• EN 50388: 2012; Railway Applications. Power supply and wagons. Technical criteria for coordination between power supply (substation) and rolling stock to ensure interoperability.
• EN 50389: 2005; Space product assurance. Wire winding of highly reliable electrical connections.
• EN 50393 : 2006 ; Test methods and requirements for accessories for use in distribution cables with a rated voltage of 0,6/1,0 (1,2) kV.
• EN 50393 : 2015 ; Test methods and requirements for accessories for use in distribution cables with a rated voltage of 0,6/1,0 (1,2) kV.
• EN 50395 : 2005+A1 : 2011 ; Electrical test methods for low voltage power cables.
• EN 50396 : 2005+A1 : 2011 ; Non-electrical test methods for low voltage power cables.
• EN 50397-1 : 2006 ; Covered conductors and related accessories for overhead lines with rated voltages above 1 kV ac and not exceeding 36 kV ac Covered conductors
• EN 50397-2: 2009; Covered conductors and related accessories for overhead lines with rated voltages above 1 kV AC and not exceeding 36 kV AC. Accessories for closed conductors. Tests and acceptance criteria
• EN 50397-3: 2010; Covered conductors and related accessories for overhead lines with rated voltages above 1 kV ac and not exceeding 36 kV ac. User guide

Standards facilitate international trade by ensuring compatibility and interoperability of components, products and services. European Standards (ENs) are documents approved by three European Standardization Organizations (ESO), CEN, CENELEC or ETSI; Recognized as competent in the field of voluntary technical standardization for EU Regulation 1025/2012.