EN IEC 61000-6-3 Electromagnetic Compatibility (EMC) - Part 6-3: General Standards - Emission Standard for Equipment in Residential Environments

The EN IEC 61000-6-3 standard published by the International Electrotechnical Commission (IEC) is a general standard that is valid only if the relevant specific product or product family electromagnetic compatibility (EMC) emission standard has not been published. In general, the EN IEC 610006-3 standard applies to electrical and electronic equipment intended for residential use. It also applies to electrical and electronic equipment intended for use in other locations not covered by the IEC 61000-6-4 or IEC 61000-6-8 standards. The purpose of this application is that all equipment used in residential, commercial and light industrial environments are within the scope of IEC 61000-6-3 or IEC 61000-6-8 standards.

If there is any doubt, the requirements in the IEC 61000-6-3 standard apply. Transmitted and radiated emission requirements in the frequency range up to 400 GHz are considered basic and have been chosen to provide adequate radio reception shielding in the defined electromagnetic environment.

The emission requirements described in this standard are not intended to apply to intentional transmissions and their harmonics from a radio transmitter.

This standard applies to devices intended to be connected directly to a low-voltage public network or to a dedicated direct current (DC) source intended to interface between the device and the low-voltage public network. This standard also applies to devices powered by batteries or operated by a non-public, but non-industrial, low-voltage power distribution system and intended for use in the locations described below.

The environments covered by this standard are residential, commercial and light industrial locations, both indoors and outdoors. For example,

• Residential properties, e.g. houses, apartments
• Retail outlets, e.g. shops, supermarkets
• workplaces, eg offices, banks
• Public entertainment areas e.g. cinemas, theaterbe, dance halls
• Outdoors, e.g. gas stations, parking lots, leisure and sports centers
• Light industrial locations, e.g. workshops, laboratories, service centers

Our organization, among the numerous test, measurement, analysis and evaluation studies it has given for businesses in various sectors, with its trained and expert staff and advanced technological equipment, electromagnetic compatibility (EMC) within the scope of EN IEC 61000-6-3 standard, emission measurement for equipment in residential environments. also provides services.