ETSI EN 301 489 Electromagnetic Compatibility (EMC) for Radio Equipment and Services

The ETSI EN 301 489 standard, developed by the European Telecommunications Standards Committee (ETSI), one of the three institutions working in the field of standardization at the European level, is about electromagnetic compatibility (EMC) for radio equipment and services and consists of the following subsections:

• Part 1: Common technical requirements - Harmonized standard for electromagnetic compatibility
• Part 2: Special conditions for radio paging equipment
• Part 3: Special conditions for short-range devices operating at frequencies between 9 kHz and 246 GHz
• Part 4: Special conditions for fixed radio links and auxiliary equipment
• Part 5: Special conditions for land mobile radio and ancillary equipment (speech and non-speech) and land circuit radio
• Part 6: Special conditions for digital advanced wireless telecommunications equipment
• Part 7: Special conditions for mobile and portable radio and ancillary equipment of digital cellular radio telecommunications systems
• Section 8: Special conditions for GSM base stations
• Part 9: Special conditions for wireless microphones, similar radio frequency audio connection equipment, wireless audio and in-ear monitoring devices
• Part 10: Special conditions for first and second generation wireless telephone equipment
• Chapter 11: Special conditions for terrestrial audio broadcast service providers
• Part 12: Very small-span terminal operated in the frequency ranges from 4 GHz to 30 GHz in the fixed satellite service harmonized standard for electromagnetic compatibility, special conditions for satellite-interactive ground stations
• Section 13: Special conditions for Citizens' Band radio and ancillary equipment (speech and non-speech)
• Part 14: Special conditions for analogue and digital terrestrial TV broadcast service transmitters
• Part 15: Special conditions for commercially available amateur radio equipment
• Part 16: Special conditions for analog cellular radio communications equipment, mobile and portable
• Part 17: Special conditions for broadband data transmission systems
• Part 18: Special conditions for terrestrial trunk radio equipment
• Part 19: Special conditions for receive-only mobile ground stations operating in the 1,5 GHz band providing data communication and GNSS receivers operating in the RNSS band providing positioning, navigation and timing data
• Part 20: Special conditions for mobile ground stations used in mobile satellite services
• Part 22: Special conditions for ground-based aviation mobile and fixed radio equipment
• Part 23: Special conditions for IMT-2000 CDMA, direct propagation base station radio, repeater and auxiliary equipment
• Part 24: Special conditions for IMT-2000 CDMA direct propagation for mobile and portable radio and ancillary equipment
• Part 25: Special conditions for CDMA 1x spread spectrum mobile stations and ancillary equipment
• Part 26: Special conditions for CDMA 1x spread spectrum base stations, repeaters and ancillary equipment
• Part 27: Special conditions for ultra-low power active medical implants and associated peripheral devices operating in the 402 MHz to 405 MHz bands
• Section 28: Special conditions for wireless digital video connections
• Part 29: Special conditions for medical data service devices operating in the bands 401 MHz to 402 MHz and 405 MHz to 406 MHz
• Part 31: Special conditions for equipment in the 9 kHz to 315 kHz band for ultra-low power active medical implants and associated peripheral devices
• Part 32: Special conditions for ground and wall probing radar applications
• Chapter 33: Special conditions for ultra-wideband devices
• Chapter 34: Special conditions for external power supply for mobile phones
• Part 35: Special requirements for low-power active medical implants operating in the 2 483,5 MHz to 2 500 MHz band

The ETSI EN 301 489-1 standard describes measurement methods and technical specifications for radio equipment and related auxiliary equipment, excluding broadcast receivers, regarding electromagnetic compatibility (EMC). Technical specifications relating to emissions from the antenna port of radio equipment and the housing port of radio equipment, and to combinations of radio and auxiliary equipment, are not included in this standard. Such technical specifications are normally found in relevant product standards for the efficient use of the radio spectrum. The relationship between this standard and the essential requirements of Directive 2014/53/EU published in European Union countries is given in the annex to the standard.

Among the numerous tests, measurements, analyses, and evaluations our organization provides for businesses in various sectors, we also offer electromagnetic compatibility (EMC) testing services for radio equipment and services in accordance with the ETSI EN 301 489 standard, thanks to our trained and expert staff and advanced technological equipment.