The EN 13814 standard, which is a European standard, consists of the following sections under the main heading of "Safety of entertainment vehicles and entertainment devices":
The EN 13814-1 standard describes the minimum requirements necessary to ensure the safe design, calculation, manufacture and installation of mobile, temporarily or permanently installed machinery and structures intended for use by persons as a leisure activity. For example, roundabouts, swings, boats, Ferris wheels, roller coasters, chutes, booths, structures for side shows and artistic air shows. These structures are recreational devices intended to be installed repeatedly and temporarily or permanently in fairgrounds, amusement parks or any other place without degradation or loss of integrity. Tribunes, construction site installations, piers, removable agricultural structures, simple coin-operated children's entertainment devices that can carry up to three children and amusement devices such as water slides or summer toboggan runs, playground equipment, rope tracks, climbing wall, inflatables, trampolines, swimming pool equipment and the like. not covered by the standard. The relevant standards apply to all recreational vehicles and devices that are not covered by this standard. However, this standard may be used in the design of any similar structural or passenger-carrying entertainment device not expressly specified herein. National regulations apply in terms of worker health and safety.
The EN 13814-2 standard provides the required requirements to ensure the safe maintenance, operation, inspection and testing of amusement rides and amusement devices intended to be installed both repeatedly without degradation or loss of integrity, and temporarily or permanently at fairgrounds and amusement parks or anywhere else. minimum requirements are described. Tribunes, construction site installations, piers, removable agricultural structures, simple coin operated children's entertainment devices that can carry up to three children and amusement devices such as water slides or summer toboggan runs, playground equipment, rope tracks, climbing wall, inflatables, trampolines, swimming pool equipment and the like. not covered by the standard. National regulations apply in terms of worker health and safety.
For the purposes of this standard, entertainment device means an arrangement of equipment that produces the desired amusement or entertainment effect when it moves primarily by its own motion in or on the passenger, or by any other system not falling within the scope of the term amusement ride. Amusement ride refers to equipment designed to entertain passengers during movement, including the result of biomechanical action. In this standard, the word entertainment device is used to refer to an entertainment device or entertainment device.
The EN 13814-3 standard defines requirements for required independent inspections of entertainment devices designed, manufactured, operated and used according to EN 13814-1 and EN 13814-3 standards.
The initial approval of any entertainment device consists of inspection, review and testing to be done. All safety-related design documents and completed entertainment devices are subject to review and scrutiny. After a successful audit, a document is issued confirming compliance with EN 13814-1 and EN 13814-3 standards. The results of the inspections, inspections and tests performed become an integral part of the entertainment device diary.
Among the numerous tests, measurements, analyses, and evaluations our organization provides for businesses in various sectors, we also offer safety testing services for recreational vehicles and devices in accordance with the EN 13814 standard, utilizing a trained and expert staff and advanced technological equipment.
To get an appointment, to get more detailed information or to request an evaluation, you can ask us to fill in our form and reach you.
