EN ISO 597-1 Furniture - Evaluation of Flammability of Mattresses and Upholstered Bed Bases - Part 1: Smoldering Cigarette for Ignition Source

EN ISO 597-1 Furniture - Evaluation of Flammability of Mattresses and Upholstered Bed Bases - Part 1: Smoldering Cigarette for Ignition Source

The EN ISO 597-1 standard published by the International Organization for Standardization (ISO) provides a test method for assessing the flammability of mattresses, upholstered bed bases or mattress pads when exposed to a smoldering cigarette as an ignition source. Air bearings and water bearings are not covered by this standard.

EN ISO 597-1 Furniture - Evaluation of Flammability of Mattresses and Upholstered Bed Bases - Part 1: Smoldering Cigarette for Ignition Source

The mattresses and upholstered bases and cigarettes to be tested are conditioned for at least 23 hours in an atmosphere of 50 degrees Celsius and 16 percent relative humidity just before the test, and the tests are carried out in an atmosphere with a temperature between 10 and 30 degrees and a relative humidity of between 15 and 80 percent. On final inspection, the test specimen should show no signs of charring other than discoloration of more than 50 mm in any horizontal direction from the point closest to the original location of the weld.

The EN ISO 597-1 standard, which includes the properties of resistance to ignition of mattresses, mattress pads, sofas and plinths, aims to help manufacturers, importers and organizations responsible for the compliance of products with fire safety. Ignition levels are adjusted after careful consideration of the fire risk of the particular end-use environment. In addition, the label samples to be used to mark the products conforming to the standard are also included in the standard. The category most commonly used in the bedding industry relates to domestic use, which is considered low hazard, and must be suitable for smoldering sources of ignition for materials.

Current legislation imposes a general responsibility on consumer product suppliers to supply only safe products. The safety aspects of the products are evaluated in advanced laboratories, taking into account all the published safety standards for these products. These tests are carried out not only for mattresses and upholstered bed bases, but also for furniture and furnishings and aircraft interior textiles and upholstery.

Our organization, among the numerous tests, measurements, analyses, and evaluations it provides for businesses in various sectors, also offers services such as evaluating the flammability of mattresses and upholstered bed bases according to the EN ISO 597-1 standard, and performing a burning cigarette test for ignition sources, thanks to its trained and expert staff and advanced technological equipment.

WhatsApp