TS 13735 Trash Can - Used in Indoor and Outdoor Areas

The "TS 13735 Waste Bin - Indoor and Outdoor Use" standard published by the Turkish Standards Institute (TSE) describes the requirements for indoor and outdoor waste bins. This standard outlines the technical and quality requirements for waste bins designed for both indoor and outdoor environments.

Key aspects of this standard are:

• Leak resistance: Indoor trash cans must be waterproof.
• Capacity test: The bin is filled with water up to 2 cm below the rim, then left for 15 minutes. The outer surface is checked for any signs of leakage or moisture.
• Load resistance: The ability of the bin to withstand weight is evaluated through specific testing procedures.

With this standard, manufacturing companies want to guarantee that their products comply with national quality and safety standards.

Basically, the garbage can should be made of plastic or corrosion-resistant materials such as aluminum and steel coated with paint or galvanization. The garbage can can be covered with wood or similar material for decorative purposes. In order to facilitate emptying and cleaning of the garbage can, the inner surfaces should be smooth and the joints should be rounded. For safe use, there should be no defects such as cracks, roughness or dents on the outer surfaces of the garbage can, and the edges of the garbage can should not be sharp or sharp. The capacity of the garbage can should be in accordance with the declared value. The volume tolerance should be at most plus/minus 1 percent of the declared nominal volume.

The indoor trash can must not leak. When testing, the trash can is filled with water until it reaches a maximum of 2 cm at the top. The outer surface of the trash can is cleaned so that no water drops or wetness remain on the surface. Wait for 15 minutes and check whether there is water on the outer surface of the trash can.

Impact shock resistance test is performed to determine the load resistance of the garbage can. In addition, tests such as heat resistance strength and stability determination are performed for garbage cans.

All indoor and outdoor garbage bins are within the scope of this standard. It includes classification according to their usage areas (for example, parks, gardens, schools, public buildings, shopping malls).

The materials to be used in the manufacture of garbage bins must be strong, durable and resistant to environmental conditions. Suitable materials such as stainless steel, galvanized sheet metal and plastic are foreseen.

In terms of design and safety conditions, there should be no elements that could harm the user, such as sharp edges or pointed ends. It should be easy to use and hygienic. If recycling is to be separated, it should be designed with relevant compartments.

It must be compatible with certain height, width and depth measurements. Different volume capacities are defined for different usage areas.

Municipalities and public institutions in particular look for compliance with this standard in bulk purchases for garbage bins. Manufacturers and importers must comply with the TS 13735 standard for certification and quality documents. In this way, consumers and the private sector obtain long-lasting, durable and safe products.

The basic features that are generally taken into account in the tests are as follows:

• Size and capacity: Dumpsters usually come in a variety of sizes to accommodate different amounts of waste. For homes, smaller bins may be sufficient. However, larger bins are needed for industrial and commercial waste. It is important to find the right bin size that can effectively handle most waste without the need for frequent emptying or overflowing.
• Material and durability: The material of the bin can directly affect its durability and longevity. Therefore, it is necessary to choose bins made of high-quality and durable materials. This factor ensures that the bins can withstand the rigors of daily use and other weather conditions. If the bins are designed for outdoor use, they are usually made of UV-resistant plastic or other corrosion-resistant metal. On the other hand, indoor bins should be made of metals that are easy to clean or maintain.
• Lid Design: The design of lids plays an important role in waste containment or odor control. Bins can have different types of lids, such as swing, swivel, or open top. Each of these lids has its own advantages and disadvantages. It is important to choose a lid design that securely seals the bin to prevent pests, insects, and odors from escaping. If areas have strong winds, a secure lid design is even more important to prevent littering.
• Odor control mechanisms: Odor control is an important factor in densely populated urban areas. For effective odor control, most trash cans are usually equipped with odor eliminators or airtight seals. These two features can help control unpleasant odors. Odor control is an important feature for both residential and commercial areas. When it comes to enclosed spaces like offices or homes, it is a good idea to invest in trash cans with odor control mechanisms.

Trash cans, especially those used outdoors, should be made of durable materials that can withstand harsh weather conditions such as rain, snow, and extreme temperatures. This ensures that the bin remains functional and long-lasting.

Our organization, which has been trying to support businesses from every sector with its testing, measurement, analysis and evaluation studies carried out in a wide range for years, has a strong staff that closely follows the developments in the world in the field of science and technology and constantly improves itself. In this context, testing services in accordance with the "TS 13735 Garbage Can - Used in Indoor and Outdoor Areas" standard are also provided to businesses.