ISIRI (Iranian Standards and Industrial Research Institute) Tests Part 10

The ISIRI (Iranian Institute of Standards and Industrial Research) standard testing evaluates the conformity of a product by a designated laboratory.

This standard is limited and is determined by ISIRI test standard, classification according to product type and checking compliance with the relevant standard. In order to obtain the correct test result, separate test conditions must be presented according to each test standard.

ISIRI 11841; Natural rubber latex concentrate - Determination of mechanical stability
ISIRI 11842;Animal and vegetable fats and oils - Determination of degradation of bleachability index (DOBI)
ISIRI 11843; Blended spreads - Specification and test methods
ISIRI 11845;Aluminum and aluminum alloys - Chemical composition
ISIRI 11846;Aluminum and aluminum alloys - Determination of nickel by spectrophotometric method using dimethylglyoxime
ISIRI 11847;Aluminum alloys-Determination of copper by electrolytic method
ISIRI 11848;Aluminum alloys - Determination of zinc by EDTA titrimetric method
ISIRI 11849; Non-destructive testing – Metallographic copy techniques of surface testing
ISIRI 11850; Covered electrodes - Determination of efficiency, metal recovery and deposition coefficient
ISIRI 11851;Welding -‐ Fusion-welded joints in steel, nickel, titanium and their alloys (excluding beam welding) -‐ Quality levels for defects
ISIRI 11852; Welding Guidelines for metallic material grouping system
ISIRI 11853;Destructive testing on welds in metallic materials - Abrasives for macroscopic and microscopic examination
ISIRI 11854; Non-destructive testing - Guidelines for NDT personnel training organizations
ISIRI 11856;Welding -‐ Arc-welded joints in aluminum and its alloys -‐ Quality levels for defects
ISIRI 11857; System balance components for photovoltaic systems - Design competence natural environments
ISIRI 11858;Photovoltaic system performance monitoring – Guidelines for measurement, data exchange and analysis
ISIRI 11859;Photovoltaic (PV) systems – Features of the facility interface
ISIRI 11863;Door leafs – Hard object impact resistance – Test method
ISIRI 11864;Windows and doors – Waterproofing – Classification
ISIRI 11865; Flexible fiber glass blanket thermal and sound insulation used to externally insulate HVAC ducts - Features
ISIRI 11866; Installation of mineral fiber ball and blanket thermal insulation for lightweight construction
ISIRI 11867; Features for high temperature fiber blanket thermal insulation
ISIRI 11868;Glass Fiber Blanket Insulation (Airplane Type) -‐ Specification
ISIRI 11869; Mineral fiber blanket thermal insulation for commercial and industrial applications
ISIRI 11870; Features of mineral fiber blanket thermal insulation for lightweight frame construction and fabricated enclosure
ISIRI 11871; Specifications of mineral fiber blanket insulation and metal mesh lined blanket type pipe insulation (industrial type)
ISIRI 11872; Classification of possible health and safety problems related to thermal insulation materials and accessories
ISIRI 11873; Sampling application method for acceptance of thermal insulation lots
ISIRI 11874; Soil quality - Determination of organochlorine pesticides and polychlorinated biphenyls - Gas chromatographic method with electron capture detection
ISIRI 11876;Canned milk and evaporated milk - Determination of tin content - Spectrometric method - Test method
ISIRI 11877;Anhydrous milk fat– Determination of sterol composition by gas liquid chromatography (routine method)
ISIRI 11878;Dried milk and dry milk products – Determination of their behavior in hot coffee (coffee test)
ISIRI 11879; Dairy fat products – Determination of water content – Karl Fischer method
ISIRI 11880;Anhydrous milk fat – Determination of sterol composition by gas liquid chromatography (Reference method)
ISIRI 11881; Crystalline silicon terrestrial photovoltaic(PV) modules - Design qualification and type approval
ISIRI 11882; Photovoltaic (PV) stand-alone systems – Design verification
ISIRI 11884; Spectrophotometers for medical laboratories
ISIRI 11885; Diaphragm gas meters
ISIRI 11886; Standard capacity sizes for testing measurement systems for liquids other than water
ISIRI 11887; Soil quality - Chronic toxicity in higher plants - Biological methods
ISIRI 11888; Quality management - Guidelines for realizing financial and economic benefits
ISIRI 11889; Road vehicle - Body of N category vehicles (Cargo box) - Application code for assembly
ISIRI 11890; Aircraft – Electrical wiring – Identification marking
ISIRI 11891; Aircraft and aerospace - Industrial data - Product identification and traceability
ISIRI 11892; Footwear - Foot and leg protectors - for toes and metal penetration resistant inserts - Requirements and test methods
ISIRI 11893; Middie atmosphere-Global model at altitudes between 30 km and 120 km and wind model at altitudes above 30 km
ISIRI 11894;Water quality - Determination of trace elements using graphite furnace atomic absorption spectrometry
ISIRI 11895;Cement - Determination of normal consistency of hydraulic cement - Test method
ISIRI 11896; Solid mineral fuels - Evaluation of measurement performance of online analyzers
ISIRI 11897;Solid mineral fuels – Guidelines for validation of alternative analysis methods
ISIRI 11898; Bituminous and bituminous materials - Effect of heat and air on a moving asphalt film (Rolling Thin Film Kiln Test) - Test method
ISIRI 11904; Road vehicle – CNG-based engine and vehicle – Specification and test method
ISIRI 11906; Wooden hammer -‐ Features
ISIRI 11953; Date Pickle - Specifications and test methods
ISIRI 11954; Date compote‐ Specification and test methods
ISIRI 11955; Date pasting - Specification and test methods
ISIRI 12000; Halal food - General guide
ISIRI 18001; Occupational health and safety management systems - Requirements
ISIRI 1656802; Playground equipment and surface - Part 3 Additional special safety requirements and test methods for slides
ISIRI 10021-3;Petroleum industry - Terminology - Part 3: Exploration and production
ISIRI 10021-7;Petroleum industry Terminology - Part 7: Miscellaneous terms
ISIRI 10042-1; Paints and varnishes Evaluation of defects in coated surfaces using optical imaging - Part 1: General guidance
ISIRI 10042-2; Paints and varnishes Evaluation of defects in coated surfaces using optical imaging - Part 2: Evaluation procedure for multi-impact lithotripsy testing
ISIRI 10042-3;Paints and varnishes Evaluation of defects in coated surfaces using optical imaging - Part 3: Evaluation of delamination and wear around a plotter
ISIRI 10044-1; Wheelchairs-‐ Part 1: Determination of static stability
ISIRI 10044-11; Wheelchairs – Chapter 11: Test dummies - Specifications
ISIRI 10044-14; Wheelchairs - Part 14: Power and control systems for powered wheelchairs and scooters - Requirements and test methods
ISIRI 10044-2; Wheelchairs – Part 2: Determining the dynamic stability of electric wheelchairs
ISIRI 10044-3; Wheelchairs – Part 3: Determining the effectiveness of the brakes
ISIRI 10044-5; Wheelchairs - Part 5: Determining dimensions, mass and maneuvering space
ISIRI 10044-7; Wheelchairs – Part 7: Measurement of seat and wheel dimensions
ISIRI 10044-8; Wheelchairs – Part 8: Requirements and test methods for static impact and fatigue forces
ISIRI 10046-1; Tool life testing in milling - Part 1: Face milling
ISIRI 10046-2; Tool life testing in milling - Part 2: End milling
ISIRI 10047-1; Information and documentation Records management - Part 1: General
ISIRI 10047-2; Information and documentation Records management - Part 2: Guidelines
ISIRI 10051-1; Refrigerants Determination of acidity by titration by titration in new and recovered refrigerants
ISIRI 10051-10; Refrigerants Test methods - Part 10: Determination of composition of new and recovered 400 series and 500 series refrigerant mixtures by gas chromatography
ISIRI 10051-11; Refrigerants Test methods - Part 11: Spectral data and chromatograms of determination by gas chromatography
ISIRI 10051-2; Refrigerants Determination of water in new and reclaimed refrigerants by Karl Fischer coulometric titration
ISIRI 10051-3; Refrigerants Determination of high boiling point residue in new and reclaimed refrigerants by volumetric or gravimetric measurement and determination of particulate residue by visual indication
ISIRI 10051-4; Refrigerants Determination of chloride in new and recovered refrigerants by silver chloride precipitation
ISIRI 10051-5; Refrigerants Gas chromatography determination of non-condensable gas in new and reclaimed refrigerants
ISIRI 10051-6; Refrigerants Test Methods - Part 6 : Determination of purity of new and recovered R11 by gas chromatography
ISIRI 10051-7; Refrigerants Test methods - Part 7: Purity determination of new and reclaimed R12 R13 R22 R23 R114 R115 R116 R124 R125 R143a R152a R218 R290 R600 and R600a by packaged column gas chromatography
ISIRI 10051-8; Refrigerants Test Methods - Part 8 : Determination of purity of new and recovered R123 by capillary and packed column gas chromatography
ISIRI 10051-9;Refrigerants Test methods - Part 9 Determination of purity of new and reclaimed R22 R32 R113 R134a R141b R142b R245fa by capillary column gas chromatography
ISIRI 10053-1;Cranes and hoists – Classification –‐ Part 1: General
ISIRI 10053-3; Cranes and hoists - Classification - - Part 3: Tower cranes
ISIRI 10053-4; Classification of Cranes - - Part 4: Jib cranes
ISIRI 10053-5; Classification of Cranes - - Part 5: Overhead and gantry bridge cranes
ISIRI 10057-1;Industrial trucks - Specifications and test methods for operator restraint systems - Part 1: Lap seat belts
SECRET 10061-1; Graphic symbols - Part 1: General
ISIRI 10061-2;Cranes - Graphic symbols – Part2:Mobile cranes
ISIRI 10061-3; Cranes - Graphic symbols - Part 3: Tower cranes
ISIRI 10063-2;Lifting equipment Controls – Layout and features –‐ Part 2: Basic regulations and requirements for mobile cranes
ISIRI 10063-3; Crane Controls – Layout and features – Part 3: Tower cranes
ISIRI 10063-4; Crane Controls – Layout and features –‐ Part 4: Jib cranes
ISIRI 10063-5;Lifting equipment Controls – Layout and features –‐ Part 5: Gantry cranes and gantry cranes
ISIRI 10064-2; Crane Cabins - Part 2: Mobile cranes
ISIRI 10064-4; Crane Controls Layout and features –‐ Part 4: Jib cranes
ISIRI 10064-5;Lifting equipment Controls – Layout and features –‐ Part 5: Gantry cranes and gantry cranes
ISIRI 10065-1; Cranes - Design principles for loads and load combinations - Part 1: General
ISIRI 10065-2; Cranes - Design principles for loads and load combinations - Part 2: Mobile cranes
ISIRI 10065-3; Cranes - Design principles for loads and load combinations - Part 3: Tower cranes
ISIRI 10065-4; Cranes - Design principles for loads and load combinations - Part 4: Jib cranes
ISIRI 10065-5; Cranes - Design principles for loads and load combinations - Part 5: Overhead and gantry bridge cranes
ISIRI 10066-3; Cranes - Information to be provided for requests, quotes and procurement - Part 3: Tower cranes
ISIRI 10066-4;Cranes - Information to be provided - Part 4: Jib cranes
ISIRI 10066-5; Cranes - Information to be provided - Part 5: Gantry cranes and gantry cranes
ISIRI 10067-1; Cranes - Drivers training - Part 1: General
ISIRI 10067-3; Cranes - Drivers training - Part 3: Tower cranes
ISIRI 10068-3; Cranes - Inspections - Part 3: Tower cranes
ISIRI 10069-1;Cranes - Crane operating manual - Part 1:General
ISIRI 10087-3; Tissue and tissue products - Part 3: Thickness - determination of volumetric thickness and apparent bulk density
ISIRI 10087-6; Tissue paper and tissue products - Part 6: Determination of weight
ISIRI 10098-1;FAE Petroleum products Measurement of emulsion stability of refractory fluids‐ Part 1: Fluids of category HFAE
ISIRI 10098-2;FB Petroleum products Measurement of emulsion stability of refractory fluids - Part2: Fluids in HFB category
ISIRI 10099-2;Particle size analysis – Image analysis methods – Part 2: Dynamic image analysis methods
BITT 10-1; Graphic Symbols for electro-techniques for electrical elements, circuits, measurements and measuring devices
ISIRI 10103-3;Sports mats Part 3: Judo mats Safety requirements
ISIRI 10103-4;Sport mats – Part 4: Determination of shock absorption
ISIRI 10103-5;Sports mats – Part 5: Determination of tread friction
ISIRI 10103-7;Sport mats – Part 7: Determination of static hardness
ISIRI 10104-8;FC125 Gaseous fire suppression systems – Physical properties and system design – Part 8 : HFC125 extinguisher
ISIRI 10105-2; Determination of particle size distribution – Measurement of single particle light interaction methods - Part 2: Luminous liquid source particle counter
ISIRI 10105-3; Determination of particle size distribution – measurement of single particle light interaction methods – Part 3: Light quenched liquid source particle counter
ISIRI 10105-4; Determination of particle size distribution – Measurement of single particle light interaction methods – Part 4: Light scattering airborne particle counter for clean areas
ISIRI 10127-1; Plain bearings – - Part 1: Suitable
ISIRI 10127-2; Plain bearings – Part 2: Form, position and surface roughness tolerances for shaft flanges and thrust sleeves
ISIRI 10137-1;Surface plates - Part 1: Cast iron
ISIRI 10137-2;Surface slabs – - Part 2: Surface granite slabs
ISIRI 10-14; Graphic Symbols for electro-technics for telecommunication lines and accessories
ISIRI 10149-1; Ergonomic procedures for improving local muscle workloads – Part 1: Guidance for reducing local muscle workloads
ISIRI 10150-1;Ergonomics of thermal environments Methods for the assessment of human responses to contact with surfaces - Part 1:Hot surfaces
ISIRI 10150-2; Ergonomics of the thermal environment Methods for the assessment of human responses to contact with surfaces - Part 2: Human contact with surfaces at medium temperature
ISIRI 10151-1; Ergonomic requirement for the design of displays and control actuators - Part 1: Human interaction with displays and control actuators
ISIRI 10151-2; Ergonomic requirements for the design of displays and control actuators - Part 2: Displays
ISIRI 10152-2;Ergonomic principles of mental workload - Part 2: design principles
ISIRI 10156-1;Plastics – Determination of hardness ‐ Part 1: Ball indentation method
ISIRI 10173-1;Zinc and zinc alloys –‐ Part 1: Analysis of solid samples by optical emission spectrometry method
ISIRI 10173-2; Zinc and zinc alloys - Part 2: Analysis by inductively coupled plasma optical emission spectrometry
ISIRI 10183-1;Moving machines Size and code definitions Part 1: Basic machine
ISIRI 10183-2; Mobile machines Dimensions and code definitions Part 2: Equipment and attachments
ISIRI 10186-1;Steel - Determination of Mo, Nb and W content in alloy steel-Inductively coupled plasma atomic emission spectrometric method- Part 1:Determination of Mo content
ISIRI 10186-2;Steel - Determination of Mo Nb and W content in alloy steel - Inductively coupled plasma atomic emission spectrometric method - Part 2: Determination of Nb content
ISIRI 10186-3;Steel – Determination of Mo Nb and W content in alloy steel – Inductively coupled plasma atomic emission spectrometric method – Part 3: Determination of W content
ISIRI 10-2; Graphic Symbols for electro-techniques for power stations, power distribution centers and transmission lines
ISIRI 10223-1;Laser and laser-related equipment - Test method and classification for laser resistance of surgical drapes and/or patient protective covers - Part 1: Primary ignition and penetration
ISIRI 10223-2; Lasers and laser-related equipment Test method and classification for laser resistance of surgical drapes and/or patient protective covers - Part 2: Secondary ignition
ISIRI 10227-61; Medical microbiology Serodiagnosis of infectious diseases - Part 61: Special requirements of polymerase chain reaction (PCR) for the detection of nucleic acid sequences of human immunodeficiency viruses HIV 1 and HIV
ISIRI 10227-62;Medical microbiology – Diagnosis of infectious diseases inserology and molecular biology –‐ Part 62: Polymerase chain reaction (PCR) Special requirements for the detection of nucleic acid sequences of the Mycobacterium tuberculosis complex
ISIRI 10229-4; Textile machinery and accessories Cards - Part 4 : Dimensions and designation of plastic bonded metal cards
ISIRI 10229-5; Textile machinery and accessories - Reeds - Part 5: Size and description of profile capsules
ISIRI 10236-1;Plastics - Epoxy resins - Determination of chlorine content Part 1: Inorganic chlorine
ISIRI 10236-2; Plastics - Epoxy resins Chlorine content determination - Part 2: Easily saponified chlorine
ISIRI 10236-3;Plastics - Epoxy resins Determination of chlorine content - Part 3: Total chlorine
ISIRI 10237-1;Plastics - ash determination Part 1: General methods
ISIRI 10237-2;Plastics - Ash Determination Part 2: Poly(alkylene terephthalate)materials
ISIRI 10237-3;Plastics - ash determination Part 3: Unplasticized cellulose acetate
ISIRI 10237-4;Plastics - ash determination Part 4: Polyamides
ISIRI 10237-5;Plastics - Ash Determination Part 5: Polyvinyl chloride
ISIRI 10239-1;Plastics Impact resistant polystyrene (PS I) molding and extrusion materials – Part 1: Identification system and specification basis
ISIRI 10239-2; Plastic Impact resistant polystyrene (SB) molding and extrusion materials - - Part 2: Preparation of test samples and determination of properties
ISIRI 10243‐1;Health informatics – Patient health card data - Part1 : General structure
ISIRI 10243‐2;Health informatics – Patient health card data –‐ Part 2: Common objects
ISIRI 10243-3;Health informatics – Patient health card data – - Part 3: Limited clinical data
ISIRI 10243-5;Health informatics ‐ Patient health card data‐ Chapter 5: Identification data
ISIRI 10243-6;Health informatics ‐ Patient health card data‐ Chapter 6: Administrative data
ISIRI 10246-1; Electroacoustics - Sound meters – Part 1: Pure tone audiometers
ISIRI 10246-2; Electroacoustic Audiometry devices Part 2: Devices for speech audiometry
ISIRI 10246-3; Electroacoustic Audiometric equipment - Part 3: Short-term test signals
ISIRI 10250-2; Elastomeric parts for pharmaceutical use – Part 2: Specifications and test methods
ISIRI 10250-3;Elastomeric parts for pharmaceutical use–‐ Part 3: Determination of the number of particles released
ISIRI 10250-4;Elastomeric parts for pharmaceutical use - Part 4:Biological requirement and test methods
ISIRI 10252-1;Continuous collection automatic weighing instruments (band scales)‐ Part 1: Metrological and technical requirements Tests
ISIRI 10252-2; Continuous collection automatic weighing instruments (belt scales) - Part 2 : Test report format
ISIRI 10255-1;Specifications for industrial washing machines – Definitions and testing of capacity and consumption characteristics –‐ Part 1: Flat business ironing machines
ISIRI 10255-2;Specifications for industrial washing machines – Definitions and testing of capacity and consumption characteristics –‐ Part2: Stack drying drums
ISIRI 10255-3;Specifications for industrial washing machines – Definitions and testing of capacity and consumption characteristics –‐ Part 3: Washing tunnels
ISIRI 10255-4;Specifications for industrial washing machines – Definitions and testing of capacity and consumption characteristics –‐ Part 4: Washer-squeezers
ISIRI 10262-1; Document management - Part 1: Principles and methods
ISIRI 10262-2; Document management – Part 2: Metadata items and information reference model
ISIRI 10263-1;Implants for surgery – Ultra high molecular weight polyethylene – Part 1: Powder form – Specification and test methods
ISIRI 10263-2;Implants for surgery – Ultra – high – molecular weight polyethylene – Part 2: Molded forms – Specifications and test method
ISIRI 10263-3;Implants for surgery – Ultra-high – molecular weight polyethylene –‐ Part 3: Accelerated aging- Specifications and test method
ISIRI 10269-1; Industrial variable access trucks - Part 1: Stability tests
ISIRI 10269-2; Industrial variable access trucks - Part 2: Additional stability tests for trucks carrying 6 m and larger freight containers
ISIRI 10278-2-4; Environmental engineering Environmental conditions and environmental testing for telecommunications equipment - Part 2 4: Characteristics of environmental tests Fixed use in non-weatherproofed locations
ISIRI 10296-1; Personal equipment for fall protection Rope access systems - Part 1: Basic principles for a work system
ISIRI 10296-1; Personal equipment for fall protection Rope access systems - Part 1: Basic principles for a work system
ISIRI 10-3;Graphic Symbols for thermal and hydroelectric power plants, electro-techniques for power transmission lines
ISIRI 10301-1;Personal protective equipment against falls from height - Part 1: Guided type fall arresters on a rigid anchor line
ISIRI 10301-2; Personal protective equipment against falls from height - Part 2: Guided type fall arresters with flexible anchor line
ISIRI 10302-4; Personal fall arrest systems - Part 4: Vertical rails and vertical lifelines with sliding fall arresters
ISIRI 10302-6; Personal fall arrest systems – Part 6 : System performance tests
ISIRI 10307-2; Banking – Key management (retail) - Part 2: Symmetric ciphers Key management and lifecycle
ISIRI 103-1;Specification and test methods of wheat flour for preparing bread
ISIRI 10310-2;Mechanical vibration and shock‐Assessment of human exposure to whole-body vibration‐Part 2: Vibration in buildings (1 Hz to 80 Hz)
ISIRI 10310-4;Mechanical vibration and shock‐Assessment of human exposure to whole-body vibration‐Part 4:Guidelines for assessing the effects of vibration and rotational motion on passenger and crew comfort in fixed guided transport systems
ISIRI 10311-1;Acoustics - Noise from shooting ranges - Part 1: Determination of muzzle by measurement
ISIRI 10311-4; Acoustics -‐ Noise from shooting ranges -‐ Part 4: Estimation of bullet sound
ISIRI 10321-1; Corrosion of metals and alloys Corrosion and contamination in industrial cooling water systems - Part 1: Guidelines for conducting pilot scale evaluation of corrosion and fouling control additives for open recirculating cooling water systems
ISIRI 10321-2; Corrosion of metals and alloys Corrosion and contamination in industrial cooling water systems - Part 2: Evaluating the performance of cooling water treatment programs using a pilot scale test rig
ISIRI 10326-1; Nickel alloys - Flame atomic absorption spectrometric analysis - Part 1: General requirements and sample dissolution
ISIRI 10326-2; Nickel alloys - Flame atomic absorption spectrometric analysis - Part 2: Determination of cobalt content
ISIRI 10326-3; Nickel alloys - Flame atomic absorption spectrometric analysis - Part 3 : Determination of chromium content
ISIRI 10326-4; Nickel alloys - Flame atomic absorption spectrometric analysis - Part 4: Determination of copper content
ISIRI 10326-5; Nickel alloys - Flame atomic absorption spectrometric analysis - Part 5: Determination of iron content
ISIRI 10326-6; Nickel alloys - Flame atomic absorption spectrometric analysis - Part 6: Determination of manganese content
ISIRI 10326‐7; Nickel alloys - Flame atomic absorption spectrometric analysis - Part 7: Determination of aluminum content
ISIRI 10326-8; Nickel alloys - Flame atomic absorption spectrometric analysis - Part 8: Determination of silicon content
ISIRI 10326-9; Nickel alloys - Flame atomic absorption spectrometric analysis - Part 9: Determination of vanadium content
ISIRI 10340-1;General fixed-height therapy beds - Part 1: Requirements and test methods
ISIRI 10346-1;Agricultural machinery Crop protection equipment Backpack sprayers - - Part 1: Requirements and test methods
ISIRI 10346-2;Agricultural machinery Crop protection equipment Backpack sprayers - Part 2: Performance limits
ISIRI 10348-1;Agricultural machinery Crop protection equipment Classification of Drift Spray equipment - - Part 1:Classes
ISIRI 10351-2; Ships and marine technology Drinking water supply on ships and marine structures - Part 2: Calculation method
ISIRI 10354-2; Safety of machinery - Pressure-sensitive protective devices - - Part 2: General principles for the design and testing of pressure-sensitive edges and pressure-sensitive rods
ISIRI 10354-3; Safety of machinery - Pressure-sensitive protective devices - - Part 3: General principles for the design and testing of wires of pressure-sensitive buffer plates and similar devices
ISIRI 10355-1; File - Part 1: Dimensions
ISIRI 10355-2;File - Part 2: Features of the cut
ISIRI 10355-3; File - Part 3: Technical - Specifications
ISIRI 10358-1;Cranes - Safe use Part 1:General
ISIRI 10358-3; Cranes - Safe use-Part 3: Tower crane
ISIRI 10359-1;Cranes - Nameplates Part 1:General
ISIRI 10359-3; Cranes - Nameplates - Part 3: Tower cranes
ISIRI 10360-1; Cranes - Requirements for mechanisms - Part 1: General
ISIRI 10360-3; Cranes - Requirements for mechanisms - Part 3: Tower cranes
ISIRI 10361-1;Cranes -‐ Access, guards and restrictions -‐ Part 1: General
ISIRI 10361-2; Cranes -‐ Access, enclosures and restrictions -‐ Part 2: Mobile cranes
ISIRI 10361-3; Cranes -‐ Access, guards and restrictions -‐ Part 3: Tower cranes
ISIRI 10363-1; Cranes - Design calculation for track wheels and associated tramline support structure - Part 1: General
ISIRI 10364-2; Construction machinery and equipment - Concrete mixers Part 2: Procedure for examining mixing efficiency
ISIRI 10369-2; Basic quantities in cutting and grinding - Part 2: Geometry of the active part of cutting tools - General conversion formulas for relating tool and working angles
ISIRI 10369-3;Basic quantities in cutting and grinding‐ Part 3: Geometric and kinematic quantities in cutting
ISIRI 10369-5; Core values in cutting and grinding‐ Chapter 5: Basic terminology for grinding processes using grinding wheels
ISIRI 1037‐31;Basic environmental tests -Procedural testing EC: Drop and tipping
BITT 10-4; Graphic Symbols for electro-technics for writing, distribution boxes, sockets and switches
ISIRI 10406-1;Aviation - Aircraft - Requirements for onboard weight and balance systems - Part 1: General
ISIRI 10406-2; Aviation - Aircraft - Requirements for onboard weight and balance systems - Part 2: Design performance and interface features
ISIRI 10408-1;Hand-held portable power tools Measurement of vibrations in the handle Part 1:General
ISIRI 10408-11; Hand-held portable power tools Measurement of vibrations in the handle - Part 11 : Fastener driving tools
ISIRI 10408-2; Hand-held portable power tools Measurement of vibrations in the handle - Part 2: Chipbreakers and rivet hammers
ISIRI 10408-3; Hand-held portable power tools Measurement of vibrations in the handle - Part 3: Rock drills and rotary hammers
ISIRI 10409-1; AC generator sets driven by reciprocating internal combustion engines - Part 1: Application, rating and performance
ISIRI 10409-10;Reciprocating internal combustion engine driven alternating current generator sets - - Part 10:Measurement of air-regenerated noise by the enveloping surface method
ISIRI 10409-12; Alternating current generator sets powered by reciprocating internal combustion engines - Part 12: Emergency power supply to the security services
ISIRI 10409-2; Alternating current generator sets driven by reciprocating internal combustion engines - Part 2: Engines
ISIRI 10409-3; Reciprocating internal combustion engine driven alternating current generator sets - Part 3: Alternating current generators for generator sets
ISIRI 10409-5; Alternating current generator sets driven by reciprocating internal combustion engines - Part 5: Generator sets
ISIRI 10409-6;Reciprocating internal combustion engine driven alternating current generator sets - - Part 6: Test methods
ISIRI 10409-7;Reciprocating internal combustion engine driven alternating current generating sets - - Part 7 : Technical statements for specification and design
ISIRI 10409-8; Reciprocating internal combustion engines operating with alternating current generating sets Part 8: Requirements and tests for low power generating sets
ISIRI 10409-9; AC generator sets powered by reciprocating internal combustion engines –‐ Part 9: Measurement and evaluation of mechanical vibrations
ISIRI 10414-2; Vehicle-Combustion engines-Piston pins Part 2: Inspection measurement principles
ISIRI 10415-1; Road vehicles – Controller area network (CAN) – Part 1: Data link layer and physical signaling
ISIRI 10416-4;Road vehicles – Controller area network (CAN) Part 4: Time – triggered communication
ISIRI 10421-2;Aerospace - aircraft ground equipment - Basic requirements - Part 2: Security requirements
ISIRI 10423-1;Fixed training equipment - Part 1 : General safety requirements and test methods
ISIRI 10423-10;Fixed training equipment - Part 10: Exercise bikes with or without fixed wheels -‐ additional special safety requirements and test methods
ISIRI 10423-2;Fixed training equipment - Part 2 : Additional special safety requirements and test methods for strength training equipment
ISIRI 10423-4;Fixed training equipment - Part 4: Strength training benches, additional special safety requirements and test methods
ISIRI 10423-5;Fixed training equipment - Part 5: Pedal crank training equipment, additional special safety requirements and test methods
ISIRI 10423-6;Fixed training equipment - Part 6: Treadmills, additional special safety requirements and test methods
ISIRI 10423‐7;Fixed training equipment -‐ Part 7: Rowing machines, additional special safety requirements and test methods
ISIRI 10425-191;Electrotechnical terms‐ Chapter 191: Reliability and service quality
ISIRI 10425-826;International electrotechnical dictionary - Part 826: Electrical installations
ISIRI 10447-9; Aggregate Tests for geometric properties - Part 9: Evaluation of fines methylene blue test
ISIRI 10453-1; Preparation of steel substrates prior to application of paints and related products Visual assessment of surface cleanliness - Part 1: Rust grades and readiness grades of uncoated steel substrates and steel substrates after general removal of previous coatings
ISIRI 10453-2; Preparation of steel substrates prior to application of paints and related products Visual assessment of surface cleanliness - Part 2: Readiness grades of precoated steel substrates after local removal of previous coatings
ISIRI 10453-3; Preparation of steel surfaces prior to application of paints and related products Visual assessment of surface cleanliness - Part 3: Preparation grades of weld edges and other surface imperfections
ISIRI 10454-9; Preparation of steel surfaces prior to application of paints and related products Tests to assess surface cleanliness - Part 9: Field method for the codeductometric determination of water-soluble salts
ISIRI 10455-9; Specification and approval of welding procedure for metallic materials – Part 9: Welding procedure test for onshore pipeline welding and offshore field butt welding of transmission pipelines
ISIRI 10459-1; Plain bearing – Hydrodynamic flat tilt pad thrust bearings under steady-state conditions - Part 1: Calculation of tiltable pad thrust bearings
ISIRI 10459-2; Plain bearing – Hydrodynamic flat tilt pad thrust bearings under steady-state conditions - Part 2: Functions for calculating tiltable pad thrust bearings
ISIRI 10459-3; Plain bearing – Hydrodynamic flat-tilt pad thrust bearings under steady-state conditions‐ Part 3: Guidance values for calculation of tiltable pad thrust bearings
ISIRI 10486-1;Agricultural tractors and machinery - PTO drive shafts and power input connection - Part 1: General manufacturing and safety requirements
ISIRI 10486-2;Agricultural tractors and machinery - PTO drive shafts and Power input connection - Part 2: Specification for the use of PTO drive shafts and the position and clearance of the PTO driveline and PIC for various attachments
ISIRI 10502-3; Textile machinery Noise test code‐ Part 3: Non-woven machinery
ISIRI 10516-1;Small boat – Inflatable life rafts –‐ Part 1: Type
ISIRI 10516-2; Small boat – Inflatable life rafts – – Part 2: Type
ISIRI 10517-1; Highway vehicles – Low speed serial data communication –‐ Part 1: Terminology and definitions
ISIRI 10533-1;IRE Acoustics Determination of sound emission from sound sources placed close to the ear – Part 1: The technique of using a microphone in the real ear (MIRE technique)
ISIRI 10533-2; Acoustic Determination of sound emission from sound sources placed close to the ear – Part 2: Technique of using a manikin
ISIRI 10534-2; Acoustic Audiometric test methods – Part 2: Sound field audiometry with pure tone and narrowband test signals
ISIRI 10535-2; Acoustic Zero Reference for calibration of audiometric equipment‐ Part 2: Reference equivalent threshold sound pressure levels for pure tones and built-in headphones
ISIRI 10535-3; Acoustic Zero Reference for calibration of audiometric equipment - Part 3: Reference equivalent threshold force levels for pure tones and bone vibrators
ISIRI 10535-4; Acoustic Reference zero for calibration of audiometric equipment - Part 4: Reference levels for narrowband masking noise
ISIRI 10535-5;Hz Reference zero for calibration of Acoustic Audiometric equipment - Part 5: Reference equivalent threshold sound pressure levels for pure tones in the frequency range 8 kHz to 16 kHz
ISIRI 10535-6; Acoustic Zero Reference for calibration of audiometric equipment - Part 6: Reference hearing threshold for short-term test signals
ISIRI 10535-7; Acoustic Reference zero for calibration of audiometric equipment - Part 7: Reference hearing threshold under free-space and dispersed-field listening conditions
ISIRI 10537-1; Statement of performance of electrochemical analyzers - Part 1 : General
ISIRI 10537-2;H Performance expression of electrochemical analyzers - Part 2 : pH value
ISIRI 10545-1; Plain bearings - Base plain bearings - Part 1: Pillow blocks
ISIRI 10545-2; Plain bearings – Base plain bearings - Part 2: Side flange bearings
ISIRI 10545-3; Plain bearings – Base plain bearings - Part 3: Center flange bearings
ISIRI 10550-3;Mechanical vibration – Vibration measurement on ships –‐ Part 3: Pre-installation vibration measurement of ship hardware
BIT 10-6; Graphic Symbols for high current connector and electrotechnics for communication
ISIRI 10633-8;Plastics _ Thermogravimetry (TG) of polymers – - Part 2: Determination of activation energy
ISIRI 10663-1; Definitions and test methods for linear deterministic properties of single-mode fiber and cable
ISIRI 10663-2; Definitions and test methods for statistical and nonlinear correlated attributes of single-mode fiber and cable
ISIRI 10663-3;Animal nutrition - Determination of amino acid content
ISIRI 10666-1;Multi-channel DWDM applications with single-channel optical interfaces
ISIRI 10673-1; Glass in building Basic soda lime silicate glass products - Part 1: Description and general physical and mechanical properties
ISIRI 10673-2; Glass in building – Basic soda lime silicate glass products – - Part 2: Specification and test method of float glass
ISIRI 10673-4; Glass in building - Basic soda lime silicate glass products - Part 4: Properties and test method of drawn glass sheets
ISIRI 10673-5; Glass in building Basic soda lime silicate glass products - Part 5: Characteristics and test method of patterned glass
ISIRI 10674-2;Plastics – Poly(phenylene ether) (PPE) molding and extrusion materials –‐ part 2: Preparation of test samples and determination of properties
ISIRI 10675-2;Plastics -Polyoxymethylene (POM) molding and extrusion materials - Part 2:Preparation of test samples and determination of properties
ISIRI 10676-2;Plastics - Thermogravimetry (TG) of polymers - Part 2: Determination of activation energy
ISIRI 10677-2;Plastics – Polyamide (PA) molding and extrusion – – Part 2:Preparation of test samples and determination of properties
ISIRI 10678-1;Determination of castor oil content in natural crude rubber –‐ Part 1: Determination of castor oil glyceride content by thin layer chromatography
ISIRI 10679-1;BR Film for wrapping rubber bales –‐ Part 1:Butadiene rubber (BR) and styrene – Butadiene rubber (SBR)
ISIRI 10679-2; Film for wrapping rubber bales – Part 2: Natural rubber
ISIRI 10680-1;Plastics – Polycarbonate (PC) molding and extrusion materials –‐ Part 1: Identification system and specification basis
ISIRI 10680-2;Plastics -‐ Polycarbonate (PC) molding and extrusion materials -‐ Part 2: Preparation of test samples and determination of properties
ISIRI 10681-1;Petroleum products ‐ Fuels (class F) classification‐ Part 1: Marine fuels categories
ISIRI 10681-2;Petroleum products Fuels (class F) Classification - Part 2: Categories of gas turbine fuels for industrial and marine applications
ISIRI 10681-3;Petroleum products Fuels (class F) Classification - Part 3:Family L (Liquefied petroleum gases)
BITT 10-7; Graphic Symbols for electro-techniques for antennas
ISIRI 10701-1;Animal feeds - Determination of calcium content - - Part 1: Titrimetric method
ISIRI 10703-1;Determination of nitrogen content in animal feeds and calculation of crude protein content - Part 1: Keldahl method
ISIRI 10703-2;Determination of nitrogen content and calculation of crude protein content - Part 2: Block cracking/steam distillation method
ISIRI 10704-1; Road vehicles – Exchange of product data between chassis and bodybuilders (BEP) – – Part 1: General principles
ISIRI 10704-2; Road vehicles Product data exchange between chassis and bodybuilders - Part 2: Dimensional bodywork exchange parameters
ISIRI 10704-3; Road vehicles - Exchange of product data between chassis and bodywork manufacturers (BEP) - - Part 3: General mass and administrative change parameters
ISIRI 10704-4; Road vehicles – Exchange of product data between chassis and bodybuilders (BEP) – – Part 4: Mapping to STEP application protocol
ISIRI 10705-3;bar MPa Road vehicles Compressed natural gas (CNG) refueling connector - Part 3: 25 MPa (250 bar) connector
ISIRI 10711-1; Road vehicles - Ergonomic requirements for driver's workplace queue shuttle buses - Part 1: General description essential requirements
ISIRI 10711-2; Road vehicles - Ergonomic requirements for the driver's workplace on line shuttle buses - Part 3: Information devices and controls
ISIRI 10711-3; Road vehicles - Ergonomic requirements for the driver's workplace on line shuttle buses - Part 3: Information devices and controls
ISIRI 10711-4; Road vehicles Ergonomic requirements for the driver's workplace on line shuttle buses - Part 4: Cabin environment
ISIRI 10719-2; Flexible cellular polymeric materials - Determination of tensile strain properties in compression - - Part 2: High density materials
ISIRI 10726-1;Refrigerated light hydrocarbon liquids General requirements for automatic level indicators - Part 1:Indicators on ships carrying liquefied gases
ISIRI 10728-1; Polyamide tubing for air brake systems - - Part 1: Requirements and test method
ISIRI 10732-1;Plastics Urea formaldehyde and urea/melamine formaldehyde powder molding compounds - Part 1: Identification system and basis - Properties
ISIRI 10732-2; Plastics Urea formaldehyde and urea/melamine formaldehyde powder molding compounds - Part 2: Preparation of test samples and determination of properties
ISIRI 10732-3; Plastics Urea formaldehyde and urea/melamine formaldehyde powder molding compounds - - Part 3: Requirements for selected molding compounds
ISIRI 10733-1;Plastics Melamine formaldehyde powder molding compounds - Part 1: Identification system and basis - Properties
ISIRI 10733-2;Plastics Melamine formaldehyde powder molding compounds - Part 2: Preparation of test samples and determination of properties
ISIRI 10733-3;Plastics Melamine formaldehyde powder molding compounds - Part 3: Requirements for selected molding compounds
ISIRI 10734-1;Plastics Melamine/phenolic powder molding compounds - Part 1: Identification system and basis - Properties
ISIRI 10734-2;Plastics Melamine/phenolic powder molding compounds (MF PMCs) - Part 2: Preparation of test samples and determination of properties
ISIRI 10734-3;Plastics Melamine/phenolic powder molding compounds (MF PMCs) - Part 3: Requirements for selected molding compounds
ISIRI 10738-1;Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption - Part 1: Mercury porosimetry
ISIRI 10741-1; Determination of phosphorus content in animal and vegetable fats and oils
ISIRI 10743-2; Refractory products Measurement of dimensions and external defects of refractory bricks - Part 2: Corner and edge defects and other surface defects
ISIRI 10744-1;Determination of cold compressive strength of densely shaped refractory products - Part1: Unpackaged referee test - Test method
ISIRI 10744-2;Determination of cold compressive strength of densely shaped refractory products - Part 2: Test by packaging - Test method
ISIRI 10745-1; Refractory mortars - Part 1: Determination of consistency using the penetrating cone method
ISIRI 10745-2; Refractory mortars - Part 2: Determination of consistency using the reflux table method
ISIRI 10745-3; Refractory mortars - Part 3: Determination of joint stability
ISIRI 10745-4; Refractory mortars - Part 4: Determination of flexural bond strength
ISIRI 10745-5; Refractory mortars - Part 5: Determination of particle size distribution
ISIRI 10745-6; Refractory mortars - Part 6: Determination of moisture content of ready-made mortars
ISIRI 10748-2; oxide in binding components
ISIRI 10754-1; Soil quality – Dehydrogenase determination in soils‐ Part 1: Method of using triphenyltetrazolium chloride (TTC)
ISIRI 10754-2; Soil quality – Dehydrogenase determination in soils‐ Part 2: Method of using iodotetrazolium chloride ( INT )
ISIRI 10760-3;Ceramic tiles - Joints and adhesives - Part3: Term definitions and - Specifications for joints
ISIRI 10760-4;Ceramic tiles - Joints and adhesives - - Part 4: Test methods
ISIRI 10795‐22;Electrical measuring equipment (AC) Special requirements - Part 22: Static counters for reactive energy (classes 0.2s and 0.3s
ISIRI 10795‐23;Electrical measuring equipment (AC) Special requirements - Part 23: Static meters for reactive energy (class 2 and
ISIRI 10795‐31;Electrical measuring equipment (AC) Special requirements –‐ Part 31: Pulse output devices for electromechanical and electronic meters (two-wire only
ISIRI 10795‐52;Electrical measuring equipment (AC) Special requirements - Part 52: Symbols
ISIRI 10795‐61;Electrical measuring equipment (ac) Special requirements - Part 61: Power consumption and voltage requirements
ISIRI 10799-1;Water quality - Determination of orthophosphate and total phosphorus content by flow analysis (FIA and CFA) Part 1: Method by flow injection analysis
ISIRI 10799-2;Determination of orthophosphate and total phosphorus content by flow analysis of water quality (FIA and CFA) - Part 2:Method by continuous flow analysis
ISIRI 10800-1;Plastics -‐ Polypropylene (PP) molding and extrusion materials -‐ Part 1: Identification system and basis - Properties
ISIRI 10801-1;Plastic Polybutene molding and extrusion materials - Part 1: Description and - Specifications
ISIRI 10802-1; Plastic Ethylene/vinyl acetate molding and extrusion materials Description and - Specifications - Part
ISIRI 10804-2; Indoor, ambient and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography Part 2: Diffusion sampling
ISIRI 10817-2-49; Fiber optic interconnect devices and passive components Basic test and measurement procedures –‐ Part 2 49: Tests Connector installation test
ISIRI 10817-2-50; Fiber optic interconnect devices and passive components - Basic test and measurement procedures - Part 2-50: Tests - Fiber optic connector tightness test with static load - Single-mode and multimode
ISIRI 10817-2‐51; Fiber optic interconnect devices and passive components Basic test and measurement procedures – - Part 2 51: Tests Fiber optic connector testing for transmission with applied tensile load Singlemode and multimode
ISIRI 10817-3-4; Fiber optic interconnect devices and passive components Basic tests and measurements - Part 3 4: Inspections and measurements Attenuation
ISIRI 10817-3-42; Fiber optic interconnect devices and passive components - Basic test and measurement procedures - Part 3-42: Inspections and measurements - Attenuation of single-mode alignment sleeves and/or flexible alignment sleeve adapters
ISIRI 10818-1;Geometric product - Properties (GPS) - General concepts -‐ Part 1: Geometric specification and verification model
ISIRI 10818-2; Geometric product specification ( GPS ) – General concepts –‐ Part 2 : Fundamentals – specification operators and uncertainties
ISIRI 10821-2; Banking Personal Identification Number management and security - Part 2: Approved algorithms for PIN encryption
ISIRI 10821-3; Banking Personal ID number management and security - Part 3: Offline PIN processing requirements in ATM and POS systems
ISIRI 10822-4; Information technology Security techniques Key management – - Part 4: Mechanisms based on weak secrets
ISIRI 10824-1;Information technology Security techniques Encryption algorithms - Part 1: General
ISIRI 10824-3; Information technology Security techniques Encryption algorithms - Part 3: Block ciphers
ISIRI 10824-4; Information technology Security techniques Encryption algorithms - Part 4: Stream ciphers
ISIRI 10825-4;Information technology - Security techniques Asset verification - Part 4: Mechanisms using cryptographic control function
ISIRI 10827-1; Gasification of insulating liquids under electrical stress and ionization
ISIRI 10844-1; Insulating liquids - Acidity determination Part 1: Automatic potentiometric titration
ISIRI 10845-3; Ashkarels for transformers and capacitors - Part 3: Technical specifications for new askarels
ISIRI 10845-5;Askarels for transformers and capacitors - Part 5: Shielding test for compatibility of material and transformer askarels
ISIRI 10845-6;askkarels for transformers and capacitors‐ Part 6: Shielding test for the effects of materials on capacitor askarels
ISIRI 10847-5; Indoor air - Part 5: Sampling strategy for volatile organic compounds (VOCs)
ISIRI 10849-1;Consumer audio/video equipment Digital interface – Part 1: General
ISIRI 10849-3;Consumer audio/video equipment‐ Digital interface – Part 3: HD-DVCR data transmission
ISIRI 10849-4;Consumer audio/video equipment-Digital interface – Part 4: MPEG2‐TS data transmission
ISIRI 10849-5;Consumer audio/video equipment Digital interface – Part 5: SDL-DVCR data transmission
ISIRI 10849-7;Consumer audio/video equipment – Digital interface – Part 7: ITU-R BO.1294 System B Transmission
ISIRI 10850-12; Cable distribution systems for television and audio signals - Part 12: Electromagnetic compatibility of systems
ISIRI 10850-2; Cable distribution systems for television and audio signals - Part 2: Electromagnetic compatibility of equipment
ISIRI 10850-3; Cable networks for television signals, audio signals and interactive services – Part 3: Active broadband equipment for coaxial cable network
ISIRI 10850-6; Cable networks for television signals, audio signals and interactive services - Part 6: Optical equipment
ISIRI 10850-7-1;Cable networks for television signals, audio signals and interactive services – Part 7-1: Hybrid fiber coax out of facility condition monitoring – Physical (PHY) Layer Specification
ISIRI 10850-7-2;Cable networks for television signals, audio signals and interactive services – Part 7-2: Offsite Hybrid Fiber Coax – Condition monitoring environment access Control (MAC) Layer Specification
ISIRI 10850-7-3;Cable networks for television signals, audio signals and interactive services - Part 7-3: Hybrid fiber coax out of facility condition monitoring - Power supply specification to relay interface bus (PSTIB)
ISIRI 10850-9; Cable distribution systems for television and audio signals - Part 9: Interface of cable distribution systems for digitally modulated signals
ISIRI 10861-2; Information technology – Telecommunications and information exchange between systems Special network of integrated services – Part 2: Reference configuration for HS-PISN exchanges (HS-PINX)
ISIRI 10862-3; Digital audio interface – Part 3: Consumer applications
ISIRI 10865-4;Audio and audio-visual equipment – Digital audio tracks – Basic measurement methods of sound properties‐ Part 4:Personal computer
ISIRI 10866-1; High quality audio equipment and systems‐ Minimum performance requirements Part 1: General
ISIRI 10873-1; Fuel cell road vehicles - Safety - Specifications - Part 1: Vehicle functional safety
ISIRI 10874-2; Road vehicles - Diagnostics in Controller Area Networks (CAN) - Part 2: Network layer services
ISIRI 10882-3; Road vehicles - Environmental conditions and tests for electrical and electronic equipment - Part 3: Mechanical loads
ISIRI 10883-3; Road vehicles - Open interface for embedded automotive applications - Part 3: OSEK/VDX Operating System (OS)
ISIRI 10883-4; Road vehicles - Open interface for embedded automotive applications - Part 4: OSEK/VDX Communication (COM)
ISIRI 10883-6; Road vehicles - Open interface for embedded automotive applications - Part 6: OSEK/VDX Implementation Language (OIL)
ISIRI 10887-1; Aircraft - Drawbar fittings interface requirements - Part 1: Mainline aircraft
ISIRI 10890-2; Air cargo equipment - Restraint straps - Part 2: Usage guidelines and lashing calculations
ISIRI 10898-2; Aircraft - Nickel-chromium and nickel-aluminum thermocouple extension cables - Part 2: Terminations General requirements and tests
ISIRI 10899-1; Microbiology of food and animal feeds Horizontal method for counting yeasts and molds - Part 1 : Technique for colony counting in products with greater water activity
ISIRI 10899-2; Microbiology of food and animal feeds Horizontal method for counting yeasts and molds - Part 2 : Technique for colony counting in products with less than or equal to water activity
ISIRI 10903-1;Electronic still picture display Removable memory - Part 1: Basic removable memory model
ISIRI 10905-2; Road vehicles - Supervisor area network (CAN) - Part 2: High speed medium access unit
ISIRI 10905-3; Road vehicles -‐ Controller area network (CAN) -‐ item 3: Low speed, fault-tolerant, environment-dependent interface
ISIRI 10906-1; Road vehicles ‐ Unified diagnostic services (UDS)‐ Part 1: Specification and requirements
ISIRI 10909-2; Road vehicles -‐ Open interface for embedded automotive applications -‐ Part 2: OSEK/VDx - OS, COM, and NM coupling capabilities
ISIRI 10913-1; Road vehicles -‐ Automotive multimedia interface -‐ Part 1: General technical overview
ISIRI 10913-2; Road vehicles -‐ Automotive multimedia interface -‐ Part 2: Usage scenarios
ISIRI 10913-3; Road vehicles -‐ Automotive multimedia interface -‐ Part 3: System requirements
ISIRI 10913-4; Road vehicles -‐ Automotive multimedia interface -‐ Part 4: Network protocol requirements for vehicle interface access
ISIRI 10913-5; Road vehicles -‐ Automotive multimedia interface -‐ Part 5: Common message set
ISIRI 10918-3; Aircraft -‐ Nickel-chromium and nickel-aluminium thermocouple extension leads -‐ Part 3: Crimp-type ring terminal ends -‐ Dimensions
ISIRI 10923-1; Refractory - Dimensions of refractory bricks - Part 1: Rectangular bricks
ISIRI 10923-2; Refractory - Dimensions of refractory bricks - Part 2: Arch bricks
ISIRI 10923-3; Refractory - Dimensions of refractory bricks - Part 3: Rectangular square square bricks for regenerative furnaces
ISIRI 10923-4; Refractory – Dimensions of refractory bricks - Part 4: Dome bricks for electric arc furnace roofs
ISIRI 10923-5; Refractory - Dimensions of refractory bricks - Part 5: Skewbacks
ISIRI 10923-6; Refractory - Dimensions of refractory bricks - Part 6: Base bricks for oxygen steel making converters
ISIRI 10923-7; Refractory – Dimensions of refractory bricks – Part 7: Bricks for use in rotary kilns –
ISIRI 1093-1; Passenger car and light truck side tire (Ply Rating8) - Specifications and test methods
ISIRI 1093-2; Passenger car and light truck radial tires - Specifications and test method
ISIRI 10955-1;Textile machinery and accessories – Steel strip for reed recesses – – Part 1: Cold rolled steel strip
ISIRI 10955-2;Textile machinery and accessories Steel strip for reed cavities - Part 2: Hardened steel strip
ISIRI 10962-5; Oil quality Sampling - Part 5: Guidance on the procedure for investigating urban and industrial areas for soil contamination
ISIRI 10973-1;Agricultural and forestry machinery Narrow tracked wheeled tractors - Part 1: Front-mounted roll-over protective structures
ISIRI 10973-2;Agricultural and forestry tractors Overturn overprotective structures on narrow track wheel tractors –‐ Part 2: Rear-mounted ROPS
ISIRI 10978-1;Gas turbines - Supply - Part 1:General introduction and definitions
ISIRI 10978-5; Gas turbines Procurement –‐ Part 5: Applications for the oil and natural gas industries
ISIRI 10978-7;Gas turbines Procurement –‐ Part 7:Technical data
ISIRI 10978-8; Gas turbines Procurement - Part 8: Inspection test installation and commissioning
ISIRI 10982-1; Corrosion of metals and alloys Corrosion fatigue testing - Part 1: Breakdown test cycles
ISIRI 10984-7;Specifications and qualification of welding procedures for metallic materials Welding procedure testing - Part 7: Overlap welding
ISIRI 11022-1; Non-destructive testing of welds Acceptance levels for radiographic testing –
ISIRI 11029-1; Enclosures for protection against ionizing radiation - Lead shielding units for 150 mm, 200 mm and 250 mm thick walls - Part 1: Chevron units 150 mm and 200 mm thick
ISIRI 11037-17; Optics and optical instruments - Preparation of drawings for optical elements and systems - Part 17: Laser radiation damage threshold
ISIRI 11037-3; Optics and optical instruments – Preparation of drawings for optical elements and systems – Part 3: Material defects – Bubbles and inclusions
ISIRI 11037-4; Optics and optical instruments - Preparation of drawings for optical elements and systems - Part 4: Material defects - Homogeneity and lines
ISIRI 11037-9; Optics and optical instruments - Preparation of drawings for optical elements and systems - Part 9: Surface treatment and coating
ISIRI 11040-2; Non-destructive testing – Penetrant testing –‐ Part 2: Testing of penetrant material
ISIRI 11040-3; Non-destructive testing – Penetrant testing – – Part 3: Reference test block
ISIRI 11040-4; Non-destructive testing – Penetrant testing –‐ Part 4: Equipment
ISIRI 11041-2; Nondestructive testing - Magnetic particle testing - Part 2: Equipment
ISIRI 11041-3; Nondestructive testing - Magnetic particle testing - Part3: Equipment
ISIRI 11044-4;Response to fire tests – Production of heat released smoke and mass loss rate - Part 4: Measurement of heat release to determine low flammability levels
ISIRI 11054-1; Rubber Analysis by pyrolytic gas chromatographic methods - Part 1: Identification of polymers (single polymers and polymer mixtures)
ISIRI 11054-2; Rubber Analysis by pyrolytic gas chromatographic methods - Part 2: Determination of the styrene/butadiene/isoprene ratio
ISIRI 11059-1;Building materials Thermal insulation products for buildings Expanded clay lightweight aggregate products formed in situ – Part 1: Loose fill products before installation - Specifications
ISIRI 11062-1;Building materials Thermal insulation products for buildings –In-situ thermal insulation consisting of expanded perlite (EP) products –‐ Part 1: Glued and loose fill products before insulation – Specifications
ISIRI 11062-2;Construction materials‐ Thermal insulation products –In-situ thermal insulation consisting of expanded perlite (EP) - Part 2: Installed products - Properties
ISIRI 11063-2;Fluid power systems - O-rings - Part 2: Housing dimensions for general applications
ISIRI 11063-4; Fluid power systems O-rings –‐ Part 4: Anti-extrusion rings (replacement rings)
ISIRI 11067-1;Hydraulic fluid power Monitoring the particle contamination level of the fluid - Part 1: General principles
ISIRI 11067-3;Hydraulic fluid power Monitoring the particle contamination level of the fluid - Part 3: Using the filter blocking technique
ISIRI 11087-8; Information technology Open systems interconnection Directory: Public key and attribute certificate frameworks
ISIRI 11106-1; Water quality Determination of surfactants - Part 1 Determination of anionic surfactants by measurement of methylene blue index MBAS
ISIRI 11111-1;Railway applications Communication signaling and processing systems - Part 1: Security-related communication in closed transmission systems
ISIRI 11112-1;Nuclear standards Nuclear fuel technology - Alpha spectrometry -‐ Part 1: Determination of neptunium in uranium and its compounds
ISIRI 11112-2; Nuclear standards Nuclear fuel technology Alpha spectrometry –‐ Part 2: Determination of plutonium in uranium and its compounds
ISIRI 11112-3;Nuclear standards Nuclear fuel technology - Alpha spectrometry -‐ Part 3: Determination of uranium 232 in uranium and its compounds
ISIRI 11114-1;Water quality – Determination of sodium and potassium‐ Part 1: Determination of sodium by atomic absorption spectrometry
ISIRI 11114-2;Water quality - Determination of sodium and potassium - Part 2: Determination of potassium by atomic absorption spectrometry
ISIRI 11114-3;Water quality - Sodium and potassium determination - Part 3:Determination of sodium and potassium by flame emission spectrometry
ISIRI 11115-1; Soil quality Dissolution for determination of total element content -Part 1: Dissolution with hydrofluoric and perchloric acids
ISIRI 11118-1; Determination of Formaldehyde in Textiles - Part 1: Free and hydrolyzed formaldehyde - Water extraction method
ISIRI 11118-2; Determination of Formaldehyde in Textiles - Part 2: Released formaldehyde - Steam absorption method
ISIRI 11141-1;Determination of Honey Saccharase activity- Part 1:Siegenthaler method
ISIRI 11141-2;Determination of Honey Saccharase activity - Part 2:Hadorn method
ISIRI 11171-2;Paper and cardboard -Determination of grease resistance Part 2 :Surface repellency test
ISIRI 11176-1;Plastic Film and coating Determination of gas transmission rate - Part 1: Differential pressure method
ISIRI 11176-2;Plastic Film and coating Determination of gas transmission rate - Part 2: Equal pressure method
ISIRI 11181-1;Textiles – Determination of thermal resistance –‐ Part 1:Low thermal resistance
ISIRI 11202-1; Swimming pool equipment - Part 1: General safety requirements and test methods
ISIRI 11202-2; Swimming pool equipment‐ Part 2: Additional safety requirements and test methods for ladders, escalators and handle brackets
ISIRI 11202-3; Swimming pool equipment - Part 3: Additional safety requirements and test methods for pool fixtures for water treatment
ISIRI 11202-4; Swimming pools equipment‐ Part 4: Additional safety requirements and test methods for starter platforms
ISIRI 11202-5; Swimming pool equipment‐ Part 5: Additional safety requirements and test methods for lane lines
ISIRI 11202-6; Swimming pool equipment‐ Part 6: Additional safety requirements and test methods for turning boards
ISIRI 11202-7; Swimming pool equipment‐ Part 7: Additional safety requirements and test methods for Water Polo Targets
ISIRI 11207-1;Short-circuit currents in dc auxiliary facilities in power plants and substations -Part 1: Calculation of short-circuit currents
ISIRI 11207-2; Short-circuit currents in dc auxiliary facilities in power plants and substations - - Part 2 : Calculation of effects
ISIRI 11210-1;Information technology Security techniques IT network security - Part1:Network security management
ISIRI 11210-2; Information technology Security techniques IT network security - Part 2: Network security architecture
ISIRI 11215-1;Channel systems for cable management –‐ Part 1 :General requirements
ISIRI 11216-4-4;Electrostatics - Part 4-4: Standard test methods for special applications - Electrostatic classification of flexible medium bulk containers (FIBC)
ISIRI 11216-5-1;Electrostatic - - Part 5 1 : Protection of electronic devices from electrostatic phenomena - General requirements
ISIRI 11220-11;Electrical measuring equipment (ac) - General requirements, tests and test conditions - Part 21: Measurement equipment
ISIRI 11220‐21;Electrical measuring equipment (ac) - General requirements, tests and test conditions - Part 21: Tariff and load control equipment
ISIRI 11221‐41;Electrical measuring equipment (AC) Reliability - Part 41: Reliability estimation
ISIRI 11222-1; Varnished fabrics for electrical purposes - - Part 1: Definitions and general requirements
ISIRI 11224‐38;Semiconductor devices Mechanical and climatic test methods - Part 38: Soft fault test method for semiconductor devices with memory
ISIRI 11225-1;Arc welding equipment-Part 1: Welding power supplies
ISIRI 11225-2; Arc welding equipment - Part 2: Liquid cooling systems
ISIRI 11225-3;Arc welding equipment - Part 3: Arc striking and stabilizing devices
ISIRI 11225-5; Arc welding equipment - Part 5: Wire feeders
ISIRI 11226-4;Plasma instrument panels - - Part 4: Climatic and mechanical test methods
ISIRI 11227-1; Water quality Evaluation of aerobic biodegradability of low concentration organic compounds - Part 1: Rinse flask batch test with surface water or surface water/sediment suspensions
ISIRI 11227-2; Water quality Assessment of low concentration aerobic biodegradability of organic compounds - Part 2: Continuous flow river model with bound biomass
ISIRI 11229-1;Textile machinery – Safety requirements –‐ Part 1: Common requirements
ISIRI 11229-4;Textile machinery - Safety requirements -‐ Part 4: Thread and rope making machinery
ISIRI 11229-5; Textile machinery Safety requirements - Part 5 : Weaving and knitting preparation machinery
ISIRI 11229-6; Textile machinery - Safety requirements - Part 6 : Fabric manufacturing machinery
ISIRI 11230-1; Medical devices using animal tissues and derivatives - - Part 1: Implementation of risk management
ISIRI 11230-2; Medical devices using animal tissues and derivatives – Part 2: Controls over sourcing, collection and processing
ISIRI 11233-1; Plastic piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General
ISIRI 11233-2; Plastic piping systems for gaseous fuel polyethylene (PE) supply - Part 2 : Pipes
ISIRI 11234-1;Plastic Phenolic powder molding compounds (PF PMCs) - Part 1: Identification system and basis - Specifications
ISIRI 11234-2;Plastic Phenolic powder molding compounds (PF PMCs) - Part 2: Preparation of test samples and determination of properties
ISIRI 11234-3;Plastic Phenolic powder molding compounds (PF PMCs) – - Part 3: Requirements for selected molding compounds
ISIRI 11235-1;Plastics Unsaturated polyester powder molding compounds (UF PMCs) - Part 1: Identification system and basis - Properties
ISIRI 11235-2;Plastics Unsaturated polyester powder molding compounds (UP PMCs) - Part 2: Preparation of test specimens and determination of properties
ISIRI 11235-3;Plastics Unsaturated polyester powder molding compounds (UP PMCs) - Part 3: Requirements for selected molding compounds
ISIRI 11236-1; Compression and mechanical connectors for power cables for nominal voltages up to 30 kV (Um = 36 kV) - Part 1: Test methods and requirements
ISIRI 11253-1; Leather chemical determination of chromic oxide ( Cr2O3 ) content - Part 1: Quantification by titration
ISIRI 11263-1;Textiles – Determination of helixity after washing –‐ Part 1: Percentage of helix change in knitted garments
ISIRI 11263-2;Textiles - Determination of spirality after washing - Part 2 : Woven and knitted fabrics
ISIRI 11263-3;Textiles – Determination of spirality after washing – – Part 3: Woven and knitted garments
ISIRI 11264-1;Rubber – Determination of metal content by atomic absorption spectrometry‐ Part 1: Determination of zinc content
ISIRI 11264-2;Rubber – Determination of metal content by atomic absorption spectrometry‐ Part 2: Determination of lead content
ISIRI 11264-3;Rubber – Determination of metal content by atomic absorption spectrometry - Part 3: Determination of copper content
ISIRI 11264-4;Rubber - Determination of metal content by atomic absorption spectrometry - Part 4: Determination of manganese content
ISIRI 11264-5; Rubber - Determination of metal content by atomic absorption spectrometry - Part 5: Determination of iron content
ISIRI 11265-1; Greenhouse gases‐ Part 1: Specification with organizational-level guidance for measuring and reporting greenhouse gas emissions and removals
ISIRI 11274-1;Photovoltaic (PV) module safety qualification - Part 1: Construction requirements
ISIRI 11278-1-1;EZ Thermistors Directly heated positive step function temperature coefficient – - Part 1 1: Empty detail specification Current limiting application Rating level EZ
ISIRI 11278-1-2;EZ Thermistors Directly heated positive step function temperature coefficient –‐ Part 1 2: Empty detail feature Heating element application Rating level EZ
ISIRI 11278-1-3;EZ Thermistors Directly heated positive step function temperature coefficient – - Part 1 3: Empty detail feature – Inrush current application - Rating level EZ
ISIRI 11278-1-4;EZ Thermistors Directly heated positive step function temperature coefficient –‐ Part 1 4: Empty detail feature – Sensing application Evaluation level EZ
ISIRI 11279-4;NB-TI Superconductivity - Part 4: Residual resistivity ratio measurement – Residual resistivity ratio of Nb Ti composite superconductors
ISIRI 11279-6; Superconductivity - Part6: Measurement of mechanical properties – Tensile testing of CU/Nb Ti composite superconductors at room temperature
ISIRI 11285-1; Determination of detection limit and decision threshold for ionizing radiation measurements - Part 1: Fundamentals and application to count measurements without the influence of sample treatment
ISIRI 11285-2; Determination of the detection limit and decision threshold for ionizing radiation measurements - Part 2: Application to count measurements with the influence of baselines and sample treatment
ISIRI 11285-3; Determination of detection limit and decision threshold for ionizing radiation measurements - Part 3: Fundamentals and application of count measurements by high resolution gamma spectrometry without the influence of sample treatment
ISIRI 11285-4; Determination of detection limit and decision threshold for ionizing radiation measurements - Part 4: Fundamentals and application to measurements using linear scale analog accelerometers without the influence of sample treatment
ISIRI 11285-5; Determination of detection limit and decision threshold for ionizing radiation measurements - Part 5: Fundamentals and applications of count measurements in filters during accumulation of radioactive material
ISIRI 11285-6; Determination of detection limit and decision threshold for ionizing radiation measurements - Part 6: Fundamentals and application to measurement measurements using transient mode
ISIRI 11285-7; Determination of detection limit and decision threshold for ionizing radiation measurements - Part 7: Fundamentals and general applications
ISIRI 11285-8; Determination of the detection limit and decision threshold for ionizing radiation measurements - Part 8: Fundamentals and application to turning on spectrometric measurements without the influence of sample treatment
ISIRI 11290-2; Carbonaceous materials used in aluminum production – Step for electrodes – - Part 2: Determination of softening point (Mettler softening point method)
ISIRI 11298-10; Lubricants Industrial oils and related products (class L) Classification -‐ Part 10: Family Y (Miscellaneous
ISIRI 11298-11; Lubricants Industrial oils and related products (class L) Classification -‐ Part 11: Family P (Pneumatic tools
ISIRI 11298-12; Lubricants Industrial oils and related products (class L) Classification - Part 12: Family Q(Heat transfer fluids)
ISIRI 11298-14; Lubricants Industrial oils and related products (class L) Classification - Part 14: Family U (Heat treatment)
ISIRI 11298-2; Lubricants Industrial oils and related products (class L) Classification - Part 2 : Family F (Spindle bearings and related couplings)
ISIRI 11298-8; Lubricants Industrial oils and related products (class L) Classification -‐ Part 8: Family R (Temporary protection against corrosion)
ISIRI 11298-9; Lubricants Industrial oils and related products (class L) Classification -‐ Part 9: Family X (Greases)
ISIRI 11309-18;Information technology – Multimedia framework (MPEG 21) - Part 18:Digital element flow
ISIRI 11310-1; Information technology – Security techniques Timestamp services –‐ Part 1: Framework
ISIRI 11310-2; Information technology Security techniques Time stamping services – Part 2: Mechanisms that generate independent tokens
ISIRI 11335-1; Road vehicles Measurement of noise emitted from speeding road vehicles Engineering method - - Part 1: Categories M and N
ISIRI 11348-1; Dentistry - Reinforced polymerization Activators (Light Cures) - Part 1: Quartz tungsten halogen lamps
ISIRI 11354-1; Naval Ships and marine technology – Propulsion plants for ships –‐ Part 1: Glossary for propeller geometry
ISIRI 11357-1; Wirelines Safety requirements for ropeway installations designed to transport people carriers - Carriers - - Part 1: Couplings carriers trucks onboard brakes cabins chairs cars maintenance carriers tow hitches
ISIRI 11357-2; Cableways - Safety requirement for ropeway installations designed to carry people Carriers - Part 2: Slip resistance test for handles
ISIRI 11357-3; Cableway Safety requirements for ropeway installations designed to carry people - Carriers - - Part 3: Fatigue tests
ISIRI 11373-2;Plastic Symbols and abbreviated terms - Part 2: Fillers and reinforcement materials
ISIRI 11373-3;Plastic Symbols and abbreviated terms - Part 3: Plasticizers
ISIRI 11373-4;Plastic Symbols and abbreviated terms - Part 4: Flame retardants
ISIRI 11388-1; Office furniture Office work chair Dimensions method
ISIRI 11419-1;Thermal performance of windows, doors and shutters- Calculation of thermal transmittance- Part 1: General
ISIRI 11422-1;Reaction to fire tests for facades –‐ Part 1 Medium-scale testing
ISIRI 11427-1; Thermal insulation products for buildings - In-situ thermal insulation consisting of exfoliated vermiculite products - Part 1: Glued and loose-filled products before assembly - Specifications
ISIRI 11427-2; Building materials - Thermal insulation products for buildings - In situ thermal insulation consisting of exfoliated vermiculite (EV) products - Part 2: Installed products - Specifications
ISIRI 11449-2;Plastic Polystyrene Molding and extrusion materials - - Part 2 : Preparation of test samples and determination of properties
ISIRI 11450-1;Plastics Plasticized poly(vinylchloride) (PVC P) molding and extrusion materials - Part 1: Identification system and basis - Properties
ISIRI 11451-4; Components for containment enclosures –‐ Part 4: Ventilation and gas cleaning systems such as filter traps, safety and regulating valves, control and protection devices
ISIRI 11451-5; Components for enclosure enclosures – Part 5 : Penetrations for electrical and fluid circuits
ISIRI 11452-2; Enclosure enclosures – Part 2: Classification according to sealing and related control methods
ISIRI 11459-1; Nondestructive testing Image quality of radiographs - Part 1: Determination of image quality value of image quality indicators (cable type)
ISIRI 11459-2; Non-destructive testing Image quality of radiographs - Part 2: Image quality indicators (step/hole type) Determination of image quality value
ISIRI 11459-3; Non-destructive testing Image quality of radiographs - Part 3: Image quality classes for ferrous metals
ISIRI 11459-4; Non-destructive testing Image quality of radiographs - Part 4: Experimental evaluation of image quality values and image quality tables
ISIRI 11459-5; Non-destructive testing Image quality of radiographs - Part 5: Image quality indicators (duplex wire type) Determination of image sharpness value
ISIRI 11461-1; Welding Testing for shopprimers for welding and related processes – Part 1: General requirements
ISIRI 11461-2; Welding Test for shopprimers for welding and similar processes – part 2: Welding properties of shopprimers
ISIRI 11461-3; Welding Test for shop primers for welding and similar processes – part 3: Thermal cutting
ISIRI 11461-4; Welding Test for shopprimers for welding and related processes – part 4: Emission of smoke and gas
ISIRI 1147-1;Textiles - woolen fabrics - determination of breaking strength and elongation (strip method)
ISIRI 1147-2;Textiles - woven fabrics - determination of tensile strength - retention method
ISIRI 11472-7-7;Hz Connectors for electronic equipment –‐ Part 7 7 : Detail specifications for 600-way shielded free and fixed connectors for data transmission at frequencies up to 8 MHz
ISIRI 11474-1;Mechanical vibration – Balance quality requirements for rotors in the stationary (rigid) condition - Part 1: Specification and verification of balance tolerances
ISIRI 11476-1;Mechanical vibration – Balance quality requirements for rotors in the stationary (rigid) condition - Part 1: Specification and verification of balance tolerances
ISIRI 11476-2; Mechanical vibration - Balancing quality requirements of rigid rotors - Part 2: Balancing errors
ISIRI 11478-4; Code of practice for the safe use of cranes – Part 4: Truck loaders
ISIRI 11479-1;Tools - Cylindrical shanks for milling cutters - Part 1: Dimensional characteristics of straight cylindrical shanks
ISIRI 11479-2;Cylindrical shanks for milling cutters – - Part 2: Dimensional characteristics of flattened cylindrical shanks
ISIRI 11479-3;Tools - Cylindrical shanks for milling cutters - Part 3: Dimensional characteristics of threaded shanks
ISIRI 11481-1; Pressing tools - Wear plates for pressing dies - Part 1Type A
ISIRI 11487-1; Animal and vegetable fats and oils Determination of fat content by pulsed NMR – Part 1: Direct method IC
ISIRI 11487-2; Animal and vegetable fats and oils Determination of fat content by pulsed NMR – Part 2: Indirect method
ISIRI 11490-1; Transmission systems and media, digital systems and networks - International telephone links and circuits - General descriptions - Guidance for assessing speech transmission quality effects not covered by the E-model
ISIRI 11493-3; Information technology - User interfaces - Universal remote console - Part 3: Presentation template
ISIRI 11493-4;Information technology ‐ User interfaces‐Universal remote console Chapter 4: Target definition
ISIRI 11494-1; Information technology - Security techniques - Attached digital signatures - Part 1: General
ISIRI 11496-1; Sampling procedures for inspection by variant - Part 1: Specification for single quality characteristic and single sampling plans indexed with acceptance quality limit (AQL) for inspection by lot for a single AQL
ISIRI 11496-2; Sampling procedures for inspection by variant ‐ Part 2: General specification for single sampling plans indexed with the acceptance quality limit (AQL) for lot-to-lot inspection of individual quality characteristics
ISIRI 11496-3; Sampling procedures for inspection by variants - Part 3: Duplicate sampling schemes indexed with acceptance quality limit (AQL) for batch inspection
ISIRI 11496-5; Sampling procedures for inspection by variables -‐ Part 5: Sequential sampling plans indexed by acceptance quality limit (AQL) for inspection by variables (known standard deviation)
ISIRI 11501-1;Information technology - Biometric profiles for interoperability and data exchange Part 1: Overview of biometric systems and biometric profiles
ISIRI 11502-3; Statistical methods in process management - Capability and performance - Part 3: Machine performance studies for measured data on discrete parts
ISIRI 11503-021-6; Fiber optic interconnect devices and passive components performance standard - - Part 021 6: Class B/2 single-mode fiber optic connectors for Category O - Uncontrolled environment
ISIRI 11503-062-6; Fiber optic interconnect devices and passive components performance standard - Part 062-6: Category O - Connectorless single mode fiber optic pigtailed isolators for uncontrolled environment and sequential testing
ISIRI 11503-092-6; Fiber optic interconnect devices and passive components performance standard - Part 092-6: Connectorless single-mode circulators for Category O - Uncontrolled environment and sequential testing
ISIRI 11504-7; Piston-operated volumetric apparatus - Part 7: Non-gravimetric methods for evaluating equipment performance
ISIRI 11507-4;Implants for surgery - Ultra high molecular weight polyethylene - Part 4: Oxidation index measurement method
ISIRI 11507-5;Surgical implants Ultra-high molecular weight polyethylene - Part 5: Morphology assessment method
ISIRI 11509-1;Measurement of water flow in closed channels Tracker methods - Part1: General
ISIRI 11509-2; Measurement of water flow in closed channels Tracer methods - Part 2: Fixed rate injection method using non-radioactive tracer
ISIRI 11509-3; Measurement of water flow in closed channels Tracer methods - Part 3: Fixed rate injection method using radioactive tracer
ISIRI 11509-6; Measurement of water flow in closed channels Tracer methods - Part 6: Transition time method using non-radioactive tracers
ISIRI 11509-7; Measurement of water flow in closed channels Tracer methods - Part 7: Transition time method using radioactive tracers
ISIRI 11516-1;Hard metals - Chemical analysis by flame atomic absorption spectrometry - Part 1: General requirements
ISIRI 11516-2;Hard metals - Chemical analysis by flame atomic absorption spectrometry - Part2: Determination of Calcium, potassium, magnesium and sodium from 0,001% (m/m) to 0,02% (m/m)
ISIRI 11516-3;Hard metals - Chemical analysis by flame atomic absorption spectrometry - Part 3: Determination of Cobalt, iron, manganese and nickel from 0,01% (m/m) to 0,5% (m/m)
ISIRI 11516-4;Hard metals - Chemical analysis by flame atomic absorption spectrometry - Part 4: Determination of molybdenum, titanium and vanadium at contents from 0,01% (m/m) to 0,5% (m/m)
ISIRI 11516-5;Hard metals - Chemical analysis by flame atomic absorption spectrometry - Part 5: Determination of cobalt, iron, manganese, molybdenum, nickel, titanium and vanadium at contents of 0,5% (m/m) to 2% ( m/m )
ISIRI 11516-6;Hard metals - Chemical analysis by flame atomic absorption spectrometry - Part 6: Determination of chromium content from 0,01% (m/m) to 2% (m/m)
ISIRI 11537-1; Hacksaw blades – Part 1: Dimensions for hand blades
ISIRI 11537-2; Hacksaw blades - - Part 2: Dimensions for machine blades
ISIRI 11559-3;Industrial tires and wheels - Part 3: Wheels
ISIRI 11561-10;Industrial trucks Verification of stability - Part 10:Additional stability test for trucks operating in special stacking condition with the load laterally displaced by electrical devices
ISIRI 11561-2; Industrial trucks - Verifying stability Part 2: Mast counterbalance trucks
ISIRI 11561-20; Industrial trucks - Verification of stability Part 20: Additional stability test for trucks operating in special load offset condition, offset by use
ISIRI 11561-8; Industrial trucks Verification of stability - Part 8: Additional stability test for trucks operating in special stowage condition with mast tilted forward and load raised
ISIRI 11563-1; Welding and related processes Recommendations for connection preparation - Part 1: Manual metal arc welding, gas shielded metal arc welding, gas welding, TIG welding and beam welding of steels
ISIRI 11571-1;Portland Composite cement –– A 32.5 – Properties
ISIRI 11575-4; Multi-burner gas-fired radiant overhead pipe heating systems for non-domestic use‐ Part 4: System H, safety
ISIRI 11582-1;Wood – Microscopic properties for hardwood identification specifications and test methods - Part 1: Grow rings and containers
ISIRI 11585-2; Carbonaceous materials used in aluminum production Pre-baked anodes and cathode blocks – Part 2: Determination of bending strength by the four-point method
ISIRI 11589-7; Fibre-reinforced plastics Methods for producing test plates - Part 7: Resin transfer molding
ISIRI 11590-1; Helical compression springs made of round wire and rod - Part 1: Quality requirements for hot formed compression springs:21.160 -May
ISIRI 11607-1; Stainless steels for springs – Part 1: Wire
ISIRI 11608-2; Centrifugal cast steel and alloy product –‐ Part2: Heat resistant materials
ISIRI 11609-2;Structural steels - - Part 2: Technical delivery requirements for hot-worked hollow sections
ISIRI 11615-3; Determination of particle size distribution by gravitational liquid precipitation methods – Part 3: X-ray gravity technique
ISIRI 11616-2; Determination of particle size distribution by gravity liquid sedimentation methods – Part 2: fixed pipette method
ISIRI 11617-5; Display of particle size analysis results – Part 5: Calculation methods for particle size analyzes using the logarithmic normal probability distribution
ISIRI 11622-2;Thermal performance of windows, doors and shutters - Determination of thermal permeability by hot box method - Part 2: Frames
ISIRI 11623-9-2; Reliability of fiber optic interconnect devices and passive optical components - Part 9-2: Reliability qualification for single fiber optic connector sets - Single mode
ISIRI 11624-10-2; Optical amplifiers - Test methods - Part 10-2: Multi-channel parameters - Pulse method using a gated optical spectrum analyzer
ISIRI 11625-4; Washer-disinfectors - Part 4: Requirements and tests for washer-disinfectors using chemical disinfection for thermolabile endoscopes
ISIRI 11626-1; Surgical implants - Partial and total hip joint prostheses - Part 1: Classification and determination of sizes
ISIRI 11632-2; Passenger vehicles - - Verification of the driver's direct field of view - - Part 2: Test method
ISIRI 11636-1;Medical gas pipeline systems - Part 1:Pipeline systems for compressed medical gases and vacuum
ISIRI 11636-2; Medical gas pipeline systems - Part 2: Anesthetic scrubber disposal systems
ISIRI 11645-1;Tools -‐ End mills and slot drills -‐ Part 1: Cylindrical shank milling cutters
ISIRI 11647-1;Tools ‐ 7/24 tapered milling machine spindles‐ Part 1: Dimensions and description
ISIRI 11662-1;Tools -‐ Assembly tools for screws and nuts -‐ Square drive sockets -‐ Part 1: Hand-operated sockets
ISIRI 11662-2;Tools -‐ Assembly tools for screws and nuts -‐ Square-drive sockets -‐ Part 2:Machine-operated sockets (impact)
ISIRI 11662-3; Tools -‐ Assembly tools for screws and nuts -‐ Square-drive sockets -‐ Part 3: Machine-operated sockets (“non-impact”) ‐ Dimensions
ISIRI 11669-1; Tools ‐ Tool chucks (end mill holders) with clamp screws for flattened parallel shank tools ‐ Part 1 : Dimensions of the drive system of tool bits
ISIRI 11669-1; Tools ‐ Tool chucks (end mill holders) with clamp screws for flattened parallel shank tools ‐ Part 1 : Dimensions of the drive system of tool bits
ISIRI 11681-1; Radionuclide imaging devices - Characteristics and test conditions - Part 1: Positron emission tomographs
ISIRI 11681-2; Radionuclide imaging devices - Characteristics and test conditions - Part 2: Single photon emission computed tomographs
ISIRI 11681-3; Radionuclide imaging devices - Characteristics and test conditions - Part 3: Gamma camera based whole body imaging systems
ISIRI 11682-1; Transport Information and control systems - Data interfaces between centers for transport information and control systems - Part 1: Message identification requirements
ISIRI 11683-1; ID cards ‐ Optical memory cards ‐ Linear recording method ‐ Part 1: Physical properties
ISIRI 11683-2; ID cards ‐ Optical memory cards ‐ Linear recording method ‐ Part 2: Dimensions and location of accessible optical field
ISIRI 11684-1; Identification cards - Contactless integrated circuit(s) cards - Closely connected cards - Part 1: Physical properties
ISIRI 11686-1; ID cards ‐ Contactless integrated circuit(s) cards ‐ Peripheral cards - - Part 1: Physical properties
ISIRI 11695-3; Testing of balanced and coaxial information technology cables - Part 3: Installed cabling as specified in ISO/IEC 15018 and related standards
ISIRI 11696-1;Ball screws - Part 1: Vocabulary and definition
ISIRI 11696-3; Ballscrews - Part 3: Acceptance conditions and acceptance tests
ISIRI 11696-4; Ball screws -‐ Part 4: Static axial stiffness
ISIRI 11696-5; Ball screws -‐ Part 5: Static and dynamic axial load ratings and service life
ISIRI 11699-1; Reference neutron radiations – Part 1: Characteristics and production methods
ISIRI 11700-1; Measurement of radioactivity in the environment - Soil - Part 1: General rules and definitions
ISIRI 11702-5;Optics and optical instruments-Field procedures for testing geodesy and measuring instruments-Part 5: Electronic tachometers
ISIRI 11702-7; Optical and optical instruments - Field procedures for testing geodesy and measuring instruments - Part 7: Optical installation instruments
ISIRI 11703-1;Soil quality - Determination of the effects of pollutants on soil flora Part 1: Method for measuring inhibition of root growth
ISIRI 11703-2;Soil quality - Determination of the effects of pollutants on soil flora Part 2:Effects of chemicals on emergence and growth of higher plants
ISIRI 11708-11;Soil - Geotechnical examination and tests - Laboratory tests of soil - Part 11: Determination of permeability with constant and falling load
ISIRI 11709-1; Assessment of surface contamination - Part 1: Beta emitters (maximum beta energy greater than 0.15 MeV) and alpha emitters
ISIRI 11710-1;Lasers and laser-related equipment - Test methods for laser beam widths, deflection angles and beam spread rates - Part 1: Stigmatic and simple astigmatic beams
ISIRI 11710-2; Lasers and laser-related equipment - Test methods for laser beam widths, deflection angles and beam spread rates - Part 2: General astigmatic beams
ISIRI 11711-1;Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges
ISIRI 11711-2;Lasers and laser-related equipment - Standard optical components - Part 2: Components for the infrared spectral range
ISIRI 11712-2; Roller pens and refills – Part 2: Documentary use
ISIRI 11713-1;Technical drawings - Representation of dimensions and tolerances - Part 1: General principles
ISIRI 11715-4;Pressure regulators for use with medical gases - Part 4:Low pressure regulators
ISIRI 11729-1;Safety of machines - Laser processing machines - Part 1:General safety requirements
ISIRI 11774-1;Marine-Small craft - Hull structure and dimensions- Part 1: Materials: Thermosetting resins, fiberglass reinforcement, reference laminate
ISIRI 11775-1;Marine-Shipbuilding – Ship screw propellers – Manufacturing tolerances – Part 1: Propellers greater than 2,50 m in diameter
ISIRI 11815-1; Non-destructive testing - Metal magnetic memory - Part 1: Glossary
ISIRI 11815-2; Non-destructive testing - Metal magnetic memory - Part 2: General requirements
ISIRI 11815-3; Non-destructive testing - Metal magnetic memory - Part 3: Inspection of welded joints
ISIRI 11818-2; Motorcyclists' protective clothing against mechanical impacts Part 2: Motorcyclists' back protectors - Requirements and test methods
ISIRI 11819-3;Road lighting - Part 3: Calculation of performance
ISIRI 11819-4;Road lighting - Part 4: Methods of measuring lighting performance
ISIRI 11838-1;Integrated optics – Vocabulary-Part 1: Basic terms and symbols
ISIRI 11838-2;Integrated optics – Vocabulary‐ Part2: Terms used in classification
ISIRI 11839-3; Monitoring and diagnosis of the condition of machines - Requirements for qualification and evaluation of personnel - Part 3: Requirements for educational institutions and the training process
ISIRI 11844-1; Ergonomic design of control centers – Part 1: Principles for the design of control centers
ISIRI 11844-2; Ergonomic design centers – Part 2: Principles for arranging control sets
ISIRI 11844-4; Ergonomic design centers – Part 4: Layout and dimensions of workstations
ISIRI 11855-3; Destructive tests on welds in metallic materials - Hot cracking tests for welds - Arc welding processes - Part 3: External loading tests
ISIRI 11883-2; Guidance on the selection and use of acceptance sampling systems for inspection of individual items in lots - Part 2: Sampling by attributes
ISIRI 11883-2; Guidance on the selection and use of acceptance sampling systems for inspection of individual items in lots - Part 2: Sampling by attributes
ISIRI 11883-3; Guidance on the selection and use of acceptance sampling systems for inspection of individual items in lots - Part 3: Sampling by variables
ISIRI 11900-1; Building acoustics - Estimating the acoustic performance of buildings from the performance of the elements - Part 1: Airborne sound insulation between rooms
ISIRI 11900-2; Building acoustics - Estimating the acoustic performance of buildings from the performance of the elements - Part 2: Impact sound insulation between rooms
ISIRI 1219-2;Storage gas water heaters - Test method for energy consumption and energy labeling instruction
ISIRI 1220-1; Flue gas space heaters - Requirements and test methods
ISIRI 1220-2;Gas space heaters Test method for energy consumption and energy labeling instruction
ISIRI 1295-1; Paper and board - Determination of roughness/smoothness (air leak methods) Part 1: General method
ISIRI 1295-3; Paper and cardboard Roughness/determination of smoothness (air leak methods) - Part 3: Sheffield method
ISIRI 1307-1;Environmental tests - Part 2 : tests - tests A : cold
ISIRI 1307-11; Environmental test - Part 2-11: tests - Ka test: salt fog
ISIRI 1307-14; Test N: temperature change
ISIRI 1307-17; Environmental tests Part 2: tests - test Q: tightness
ISIRI 1307-2; Environmental tests - Part 2: tests - tests B: dry heat
ISIRI 1307-20; Environmental tests Part 2: Tests - Test T : Soldering
ISIRI 1307-21; Environmental tests Part 2: Tests-test u: Robustness of termination and integrated mounting devices
ISIRI 1307-2-2; Environmental testing - Part 2-2: Tests - Test B: Dry heat
ISIRI 1307-30; Environmental test Part 2: test Db and guidance: moist heat cycle (12+12 hour cycle)
ISIRI 1307-31; Environmental tests - Procedures test EC: Fall and tipping
ISIRI 1307‐32;Environmental tests part 2: tests - Ed test: free fall
ISIRI 1307-37; Environmental tests Part 2: Tests - Test Fdc: Random vibration broadband reproducibility is low
ISIRI 1307‐52;Environmental tests Part 2: tests-test kb: salt mist, cyclic(sodium chloride solution)
ISIRI 1307-58;Environmental tests Part 2: tests - test td: solderability, resistance to dissolution of metallization and soldering heat of surface mount devices (SMD)
ISIRI 1307-6; Environmental Test - Part 2-6: Tests - Test Fc: Vibration (sinusoidal)
ISIRI 1307-68; Environmental tests - part 2: test L: dust and sand
ISIRI 1311-0;Radio Frequency Cables - Part 0: Guide to Designing Detailed Specifications
ISIRI 1311-1;Radio Frequency cables - Part 1: General requirements and measurement methods
ISIRI 1311-2; Radio Frequency Cables - Part 2: Related Cable Specifications
ISIRI 1314-10; Sound system hardware Chapter 10: Peak program level meters
ISIRI 1314-11; Audio system equipment – Part 11: Application of connectors for interconnection of audio system equipment
ISIRI 1314-12; Audio equipment - Part 12: Application of connectors for broadcast and similar use
ISIRI 1314-13;Sound system hardwarePart 13: Listening tests on speakers
ISIRI 1314-14;Sound system equipment Part 14: Circular and elliptical loudspeakers - Outer frame diameters and mounting dimensions
ISIRI 1314-15;Audio, video and audio-visual systems-Interconnections and matching values-Preferred matching values of analog signals
ISIRI 1314-16;Sound system hardwareChapter 16: Objective assessment of speech intelligibility according to speech transmission index
ISIRI 1314-17;Audio equipment -Part 17: Standard audio indicators
ISIRI 1314-18;Audio hardwareChapter 18:Peak program level meters –Digital audio peak level meters
ISIRI 1314-4;Sound system hardware –Part 4: Microphones
ISIRI 1314-5;Sound system equipment -Part 5: Speakers
ISIRI 1314-6; Sound system hardware – Part 6: Auxiliary passive elements
ISIRI 1314-7;Sound system equipment -Part 7: Headphones and headphones
ISIRI 1314-9; Sound system equipment – Part 9: Artificial reverberation, time delay and frequency shift equipment
ISIRI 1393-1;Leather - Physical and mechanical tests - Determination of tear load - Part 1: Single edge tear - Test method
ISIRI 1393-2;Leather - Physical and mechanical tests - Determination of tear load - Part 2 : Double edge tear - Test method
SPECIFICATION FOR ISIRI 142-1;LITHIUM-BASED LUBRICANT GREASE
ISIRI 142-2; SPECIFICATION FOR CALCIUM BASED LUBRICANT GREASE
ISIRI 142-3; SPECIFICATION FOR SODIUM BASED LUBRICANT GREASE
ISIRI 1425-1; Textile fabrics - Interlinings - Part 1: Fusible interlinings (woven and knitted) - specifications
ISIRI 1425-2; Textile fabrics- Interlinings-Part 2: Weaving-sewing-interlinings-Test methods and - Properties
ISIRI 1511-1; Textiles - Color fastness tests to bleaching: Hypochlorite
ISIRI 1511-2; Textiles - Color fastness tests to bleaching: Peroxide
ISIRI 1521-1;Textiles- Determination of abrasion resistance of fabrics by Martindale method Part 1: Martindale abrasion test apparatus
ISIRI 1521-2; Determination of abrasion resistance of fabrics by the Textiles-Martindale method Part 2: Determination of sample deterioration
ISIRI 1521-3; Determination of abrasion resistance of fabrics by Textile-Martindale method Part 3: Determination of mass loss
ISIRI 1521-4;Textiles- Determination of abrasion resistance of fabrics by Martindale method Part 4: Evaluation of appearance change
ISIRI 156-1; Edible fats and oils - Baked shortening - Specification and test methods(Amendment No.1)
ISIRI 1562-1; Household and similar electrical appliances - Safety - Part 1: General requirements
ISIRI 1562-10; Household and similar electrical appliances - Safety - Part 10: Electric hobs, cookers, ovens and grills for household use - Performance measurement methods
ISIRI 1562-2-100; Household and similar electrical appliances - Safety - Part 2-100 : Special requirements for electric hand-operated garden blowers, vacuums and blower vacuums
ISIRI 1562-2-101; Household and similar electrical appliances - Safety - Part 2-101 : Special requirements for evaporators
ISIRI 1562-2-103; Household and similar electrical appliances - Safety - Part 2‐103 : Special requirements for drives for doors, doors and windows
ISIRI 1562-2-104; Household and similar electrical appliances - Safety - Part 2-104: Special requirements for devices to recover and/or recycle refrigerant from air conditioning and refrigeration equipment
ISIRI 1562-2-105; Household and similar electrical appliances - Safety - Part 2-105 : Special requirements for multifunctional shower enclosures
ISIRI 1562-2-108; Household and similar electrical appliances - Safety - Part 2-108: Special requirements for electrolyzers
ISIRI 1562-2-11; Household and similar electrical appliances - Safety - Part 2-11 : Special requirements for tumble dryers
ISIRI 1562-2-12; Household and similar electrical appliances - Safety - Part 2-12 : Special requirements for heating plates and similar appliances
ISIRI 1562-2-13; Household and similar electrical appliances - Safety - Part 2-13: Special requirements for fryers, frying pans and similar appliances
ISIRI 1562-2-14; Household and similar electrical appliances - Safety - Part 2-14: Special rules for kitchen machines
ISIRI 1562-2-15; Household and similar electrical appliances - Safety - Part 2-15 : Special requirements for appliances for heating liquids
ISIRI 1562-2-16; Household and similar electrical appliances - Safety - Part 2-16: Special requirements for food waste shredders
ISIRI 1562-2-17; Household and similar electrical appliances - Safety - Part 2-17: Special rules for blankets, pillows and similar flexible heating devices
ISIRI 1562-2-2; Household and similar electrical appliances - Safety - Part 2-2: Special requirements for vacuum cleaners and suction cleaners
ISIRI 1562-2‐21; Household and similar electrical appliances - Safety - Part 2-21 : Special requirements for storage water heaters
ISIRI 1562-2-23; Household and similar electrical appliances - Safety - Part 2-23 : Special requirements for devices for skin or hair care
ISIRI 1562-2-24; Household and similar electrical appliances - Safety - Part 2-24 : Special requirements for refrigeration appliances, freezers and ice makers
ISIRI 1562-2-25; Household and similar electrical appliances - Safety - Part 2-25: Special requirements for microwave ovens, including combination microwave ovens
ISIRI 1562-2-26; Household and similar electrical appliances - Safety - Part 2-26 : Special requirements for watches
ISIRI 1562-2-28; Household and similar electrical appliances - Safety - Part 2-28 : Special rules for sewing machines
ISIRI 1562-2-3; Household and similar electrical appliances - Safety - Part 2-3 : Special requirements for ironing machines
ISIRI 1562-2-30; Household and similar electrical appliances - Safety - Part 2-30: Special requirements for room heaters
ISIRI 1562-2-31;Household and similar electrical appliances - Safety - Part 2-31 : Special requirements for hoods
ISIRI 1562-2-32; Household and similar electrical appliances - Safety - Part 2-32: Special rules for massagers
ISIRI 1562-2-34; Household and similar electrical appliances - Safety - Part 2-34: Special requirements for motor compressors
ISIRI 1562-2-35; Household and similar electrical appliances - Safety - Part 2-35: Special requirements for instantaneous water heaters
ISIRI 1562-2‐36;Household and similar electrical appliances - Safety - Part 2-36: Special requirements for commercial electric cooktops, ovens, hobs and cooker elements
ISIRI 1562-2-38; Household and similar electrical appliances - Safety - Part 2-38: Special requirements for commercial electric grills and grill grates
ISIRI 1562-2‐39;Household and similar electrical appliances - Safety - Part 2-39: Special requirements for commercial electric multipurpose cookware
ISIRI 1562-2-4; Household and similar electrical appliances - Safety - Part 2-4 : Special requirements for spinners
ISIRI 1562-2-44; Household and similar electrical appliances - Safety - Part 2-44: Special requirements for ironing machines
ISIRI 1562-2-45; Household and similar electrical appliances - Safety - Part 2-45 : Special requirements for portable heating appliances and similar appliances
ISIRI 1562-2-47; Household and similar electrical appliances - Safety - Part 2-47: Special requirements for commercial electric boiling pans
ISIRI 1562-2-48; Household and similar electrical appliances - Safety - Part 2-48 : Special requirements for commercial electric grills and toasters
ISIRI 1562-2-49;Household and similar electrical appliances - Safety - Part 2-49:Special requirements for commercial electric hot cabinets
ISIRI 1562-2-5; Household and similar electrical appliances - Safety - Part 2-5: Special requirements for dishwashers
ISIRI 1562-2-50; Household and similar electrical appliances - Safety - Part 2-50 : Special requirement for commercial electric bain-maries
ISIRI 1562-2‐51;Household and similar electrical appliances - Safety - Part 2-51:Special requirements for stationary circulation pumps for heating and domestic water installations
ISIRI 1562-2-52; Household and similar electrical appliances - Safety - Part 2-52 : Special requirements for oral hygiene device
ISIRI 1562-2-53; Household and similar electrical appliances - Safety - Part 2-53: Special rules for sauna heaters
ISIRI 1562-2-54; Household and similar electrical equipment - Safety - Part 2-54: Special requirements for household liquid or steam-use surface cleaning devices
ISIRI 1562-2-55; Household and similar electrical equipment - Safety - Part 2-55: Special requirements for electrical equipment for use with aquariums and garden ponds
ISIRI 1562-2-56; Household and similar electrical equipment - Safety - Part 2-56: Special requirements for projectors and similar devices
ISIRI 1562-2-58; Household and similar electrical appliances - Safety - Part 2-58 : Special rules for commercial electric dishwashers
ISIRI 1562-2-59; Household and similar electrical appliances - Safety - Part 2-59 : Special requirements for insecticides
ISIRI 1562-2-6; Household and similar electrical appliances - Safety - Part 2-6 : Special requirements for fixed hobs, cookers, ovens and similar appliances
ISIRI 1562-2-60; Household and similar electrical appliances - Safety - Part 2-60: Special requirements for whirlpool baths and whirlpool spas
ISIRI 1562-2-61; Household and similar electrical appliances - Safety - Part 2-61: Special requirements for thermal storage room heaters
ISIRI 1562-2-62; Household and similar electrical appliances - Safety - Part 2-62: Special requirements for commercial electric wash basins
ISIRI 1562-2-65; Household and similar electrical appliances - Safety - Part 2-65 : Special requirements for air purifiers
ISIRI 1562-2-66; Household and similar electrical appliances - Safety - Part 2-66: Special requirements for waterbed heaters
ISIRI 1562-2-67; Household and similar electrical appliances - Safety - Part 2-67 : Special requirements for floor treatment and floor cleaning machines for industrial and commercial use
ISIRI 1562-2-68; Household and similar electrical equipment - Safety - Part 2-68: Special requirements for spray extractors for industrial and commercial use
ISIRI 1562-2-69; Household and similar electrical appliances - Safety - Part 2-69: Special requirements for wet and dry vacuum cleaners including electric brush for industrial and commercial use
ISIRI 1562-2-7; Household and similar electrical appliances - Safety - Part 2-7 : Special requirements for washing machines
ISIRI 1562-2-70; Household and similar electrical appliances - Safety - Part 2-70 : Special requirements for milking machines
ISIRI 1562-2-71; Household and similar electrical appliances - Safety - Part 2-71 : Special requirements for electric heating devices for rearing and rearing animals
ISIRI 1562-2-73; Household and similar electrical appliances - Safety - Part 2-73 : Special requirements for fixed immersion heaters
ISIRI 1562-2-74; Household and similar electrical appliances - Safety - Part 2-74: Special requirements for portable immersion heaters
ISIRI 1562-2-75; Household and similar electrical equipment - Safety - Part 2-75: Special requirements for commercial dispensers and vending machines
ISIRI 1562-2-76; Household and similar electrical appliances - Safety - Part 2-76: Special requirements for electric fence energizers
ISIRI 1562-2-77; Household and similar electrical appliances - Safety - Part 2-77: Special requirements for pedestrian-controlled, mains-operated lawnmowers
ISIRI 1562-2-78; Household and similar electrical appliances - Safety - Part 2-78 : Special requirements for outdoor barbecues
ISIRI 1562-2-8; Household and similar electrical appliances - Safety - Part 2-8 :Special requirements for shavers, hair clippers and similar appliances
ISIRI 1562-2-80; Household and similar electrical appliances - Safety - Part 2-80 : Special requirements for fans
ISIRI 1562-2-81; Household and similar electrical appliances - Safety - Part 2-81: Special requirements for foot warmers and heating mats
ISIRI 1562-2-83; Household and similar electrical appliances - Safety - Part 2-83: Special requirements for heated gutters for roof drainage
ISIRI 1562-2-84; Household and similar electrical appliances - Safety - Part 2-84: Special requirements for toilets
ISIRI 1562-2-85; Household and similar electrical appliances - Safety - Part 2-85: Special requirements for fabric steamers
ISIRI 1562-2-86; Household and similar electrical appliances - Safety - Part 2-86: Special rules for electric fishing machines
ISIRI 1562-2-87; Household and similar electrical appliances - Safety - Part 2-87: Special requirements for electrical animal stunning equipment
ISIRI 1562-2-9; Household and similar electrical appliances - Safety - Part 2-9: Special rules for grills, toasters and similar portable cooking appliances
ISIRI 1562-2-90; Household and similar electrical appliances - Safety - Part 2-90 : Special requirements for commercial microwave ovens
ISIRI 1562-2-91; Household and similar electrical equipment - Safety - Part 2-91 : Special requirements for walk-behind and hand-held lawnmowers and lawn trimmers
ISIRI 1562-2-92; Household and similar electrical appliances - Safety - Part 2-92: Special requirements for pedestrian-controlled, mains-operated lawn scrapers and aerators
ISIRI 1562-2-95; Household and similar electrical appliances - Safety - Part 2-95 : Special requirements for drives for vertically moving garage doors for residential use
ISIRI 1562-2-96; Household and similar electrical appliances - Safety - Part 2-96 :Special requirements for flexible sheet elements for room heating
ISIRI 1562-2-97; Household and similar electrical appliances - Safety - Part 2-97 : Special requirements for drives for roller shutters, awnings, roller shutters and similar equipment
ISIRI 1562-2-98; Household and similar electrical appliances - Safety - Part 2-98: Special requirements for humidifiers
ISIRI 1562-2-99; Household and similar electrical appliances - Safety - Part 2-99 : Special requirements for commercial electric hoods
ISIRI 1562-37; Household and similar electrical appliances - Safety - Part 37: Special requirements for commercial electric fryers
ISIRI 1562-40; Household and similar electrical appliances - Safety - Part 40: Special requirements for electric heat pumps, air conditioners and dehumidifiers
ISIRI 1562-57; Household and similar electrical appliances - Safety - Part 57: Special requirements for freezing devices combined with Motor Compressors
ISIRI 1562-64; Household and similar electrical appliances - Safety - Part 64: Special requirements for commercial electric kitchen machines
ISIRI 1562-69; Household and similar electrical appliances - Safety - Chapter 69 Special requirements for wet and dry vacuum cleaners / including electric brush for industrial and commercial use
ISIRI 1562‐82; Household and similar electrical appliances - Safety - Part 82: Special requirements for recreational machines and personal service machines
ISIRI 1563-2; Specification for energy consumption and energy labeling of electric domestic water heaters
ISIRI 1693-1; Hydraulic Cement - Test Methods for Chemical Analysis - part 1 - Determination of Minor Components
ISIRI 1693-2; Hydraulic Cement - Test Methods for Chemical Analysis - part 2 Determination of Free Calcium Oxide
ISIRI 1816-1; Vanilla - Part 1: Features
ISIRI 1828-2; Instant gas water heaters Test method for energy consumption and energy labeling instruction
ISIRI 1830-1;Hygienic towels (normal – anatomical – wing) – Physical and chemical – Specifications and test methods
ISIRI 1830-2; Microbiological Test Methods and Specification for Sanitary Towels and Diapers -
ISIRI 1885-1; General principles for the construction of uncovered loading bays
ISIRI 189-1;Text tiles: Color Fastness Tests-Part 1: Color Fastness to Mechanical Washing. Test 1
ISIRI 189-2; Text tiles: Color Fastness Tests Part 2: Color Fastness to Mechanical Washing
ISIRI 189-3; Text tiles : Color Fastness Tests Part 03 : Color Fastness to Mechanical Washing
ISIRI 189-4; Text tiles : Color Fastness Tests Part 04 : Color Fastness Test to Mechanical Washing 4
ISIRI 189-5;Text tiles: Color Fastness Tests Part 05:Color Fastness Test to Mechanical Washing 5
ISIRI 1900-1; Code of practice for concrete and reinforced concrete part 1
ISIRI 1900-3; Application rules for concrete and reinforced concrete Part 3: material properties and test methods
ISIRI 1900-4; Rules of application for concrete and reinforced concrete Part 4: application requirements
ISIRI 1900-5; Code of Practice for Concrete and Reinforced Concrete Chapter 5: Design Considerations
ISIRI 1902-1;Excavations and foundations - Part 1: Solid conditions, testing, sampling
ISIRI 1902-2; Excavations and foundations - Part 2: Different soil types
ISIRI 1902-3;Excavations and foundations - Part 3: Deep foundations, pile and pile foundation
ISIRI 19-1; Apricot kernels in shell - specification and test methods
ISIRI 191-1;Solid, Mixed, Compound Fertilizers - Features
ISIRI 191-2;Solid, Mixed, Mixed Fertilizers - Specifications
ISIRI 19-2; Shelled peach seeds. Specification and test methods
ISIRI 192-1;Solid, Mixed, Compound Fertilizers - Features
ISIRI 192-2;Solid, Mixed, Mixed Fertilizers - Specifications
ISIRI 1926-1;Rubber insulated cables - Rated voltages up to and including 450/750 v - Part 1: General requirements
ISIRI 1926-2;Rubber insulated cables - Rated voltages up to and including 450/750 v - Part 2 : Test methods
ISIRI 1926-3;Rubber insulated cables - Rated voltages up to and including 450/750 v - Part 3 : Heat resistant silicone insulated cables
ISIRI 1926-4;Rubber insulated cables - Rated voltages up to and including 450/750 v - Part 4 : Cords and flexible cables
ISIRI 1926-5;Rubber insulated cables - Rated voltage up to and including 450/750 v - Part 5 : Elevator cable
ISIRI 1926-6;Rubber insulated cables - Rated voltages up to and including 450/750 v - Part 6 : Arc welding electrode cables
ISIRI 1926-7; Cables with rubber insulation - Rated voltages up to and including 450/750 v - Part 7 : Cables with heat resistant ethylene-vinyl acetate rubber insulation
ISIRI 1926-8;Rubber insulated cables - Rated voltages up to and including 450/750v - Part 8 : Cables for applications requiring high flexibility
ISIRI 1928-1; Low Voltage switchgear and controlgear - Part 1: Type-tested and partially type-tested assemblies
ISIRI 1928-2; Low Voltage switchgear and controls - Part 2: Special requirements for busbar trunking systems (bus routes)
ISIRI 1928-3; Low-Voltage switchgear and controlgear assemblies - Part 3: Special requirements for low-voltage switchgear and controlgear assemblies intended to be installed in places accessible to unqualified persons for their use Distribution boards
ISIRI 1928-5; Low Voltage switchgear and control assemblies - Part 5: Special requirements for assemblies for power distribution in public networks
ISIRI 19-3; Almond kernel(BOKHURAK) - Specification and test methods
ISIRI 1937-1;Electrical installations of buildings –Part 1: Basic principles, evaluation of general features, definitions
ISIRI 1937-4-42;Electrical installations of buildings –Chapter 4–42 : Protection for safety – Protection against thermal effects
ISIRI 1937-4-43;Electrical installations of buildings - Part 4 43: Protection for safety Protection against overcurrent
ISIRI 1937-7-708; Low voltage electrical installation – Chapter 7 708 : Requirements for special installations or locations – Caravan parks, camping parks and similar locations
ISIRI 1937-7-709; Low voltage electrical installation –‐ Part 7 709: Requirements for special installations or locations – Marinas and similar locations
ISIRI 1937-7-721; Low voltage electrical installation –‐ Part 7 721 : Requirements for special installations or locations – Electrical installations in caravans and motorhomes
ISIRI 1937-7-729; Low voltage electrical installation – Chapter 7 729: Requirements for special installations or locations – Operating or maintenance scaffolding
ISIRI 2089-1;Milk and dairy products – Determination of acidity (Reference method) – Test method
ISIRI 2089-2; Determination of acidity of milk and dairy products (routine method) Test method
ISIRI 2169-1;Buses, trucks and trailers Bias Specifications and test methods
ISIRI 2169-2; Buses, trucks and trailers radial Ɵres Features and test methods
ISIRI 2200-1; Specification and test methods for enzymes
ISIRI 2200-2;Alpha amylase - Determination of activity (colorimetric method)
ISIRI 2200-3; Determination of Catalase-Activity
ISIRI 2200-4;Lipase - Determination of enzyme activity
ISIRI 2200-5; Clucoamilase - Determination of enzyme activity
ISIRI 2200-6; Cellulase - Determination of enzyme activity
ISIRI 2200-7; Pepsin-Activity determination
ISIRI 2200-8; Bovine rennet - Determination of total milk coagulation activity
ISIRI 2200-9;Pectinase - Determination of enzyme activity
ISIRI 2202-1; Infant form adapted milk
ISIRI 2202-2;Baby food 2 - (Follow-up formula) Specifications and test methods
ISIRI 2274-1; Essential Oils – Evaluation of Miscibility in Ethanol
ISIRI 2274-10; Essential oils (containing tertiary alcohols) - Evaluation of free alcohol content by determination of ester value after cold formulation - Test method
ISIRI 2274-11; Essential oils - Determination of ester values before and after acetylation and evaluation of free and total alcohols content - Test method
ISIRI 2274-12; Essential oils – Determination of carbon dioxide value – Free hydroxylamine method – Test method
ISIRI 2274-13; Essential oils – Determination of freezing point – Test method
ISIRI 2274-14; Essential oils - Estimation of primary and secondary free alcohol content by acetylation in pyridine -Test method
ISIRI 2274-15; Essential oils containing tertiary alcohols - Estimation of primary and secondary free alcohol content by acetylation in pyridine - Test method
ISIRI 2274-2; Essential Oils – Determination of Acid Value
ISIRI 2274-3; Essential Oils – Determination of Ester Value
ISIRI 2274-4;Essential oil – Quantitative assessment of residues in evaporation – Test method _
ISIRI 2274-5; Essential oil – Optical rotation determination – Test method
ISIRI 2274-6; Essential oil – Determination of refractive index – Test method
ISIRI 2274-7; Essential oil – Determination of phenol content – Test method
ISIRI 2274-8; Essential oil – Determination of distillation residue under reduced pressure – Test method
ISIRI 2274-9; Essential oil - Determination of relative density at 20 C - Test method
ISIRI 2344-1; Pickled cheese - Specifications and test methods
ISIRI 2394-1;Fish, shrimp-microbiological - Properties
ISIRI 2432-1; Rigid porous plastics Determination of bending properties part 1: Basic bending test
ISIRI 2432-2;Determination of flexural properties of rigid porous plastics - Part 2:Determination of flexural strength and apparent flexural modulus of elasticity
ISIRI 2457-1; Appliance couplers for household and similar general purposes - Part 1 : General requirements
ISIRI 2457-2-3; Appliance couplers for household and similar general purposes - Part 2-3 : Appliance couplers with a degree of protection higher than IPX0
ISIRI 2461-1; Microbiology of food and animal feeds Horizontal methods for the detection and enumeration of Enterobacteriaceae - Part 1: Detection and enumeration by MPN technique with each enrichment
ISIRI 2461-2; Microbiology of food and animal feed, horizontal methods for detection and enumeration of Enterobacteriaceae‐ Part 2: Colony counting method
ISIRI 2480-1; Insulators for overhead lines with a rated voltage above 1000 V - Part 1: Ceramic or glass insulating units for AC systems Definitions, test methods and acceptance criteria
ISIRI 2485-2; Canned apples – specification and test methods
ISIRI 2485-3; Canned Pear - Specification and test methods
ISIRI 2485-4; Canned apricots – Specification and test method
ISIRI 2485-5; Canned blackberries – Specification and test method
ISIRI 2485-6;Canned cherries- Specification and test methods
ISIRI 2485-8; Canned Peach - Specification and test methods
ISIRI 251-1;Pepper (Piper nigrum L.), whole or ground - Specification and test methods - Part 1: Black pepper
ISIRI 251-2;Pepper (Piper nigrum L.), whole or ground - Specification and test methods - Part 1: White Pepper
ISIRI 2561-1;Agricultural machinery tractors rear mounted PTO types 1,2 and 3‐ Part 1: General - Specifications, safety requirements, dimensions for main shield and clearance zone
ISIRI 2561-2;Agricultural machinery Tractors Rear-mounted PTO types 1,2 and 3 - Part 2: Dimensions for narrow crawler tractors, main shield and clearance zone
ISIRI 2561-3;Agricultural machinery‐ Tractors - Rear-mounted PTO types 1, 2 and 3 ‐Part 3: Main PTO dimensions and spline dimensions, position of P
ISIRI 2587-1;Textile machines and accessories Cylindrical pipes‐ Part 1: Recommended main dimensions
ISIRI 2587-2; Textile machinery and accessories Cylindrical tubes - Part 2: Dimensional tolerances and illustration of tubes for open-end spinning machines
ISIRI 2587-3; Textile machinery and accessories cylindrical tubes - Part3: Dimensional tolerances and illustration of tubes for strip yarns
ISIRI 2587-4;Textile machines and accessories Cylindrical tubes - Part 4: Dimensions, tolerances and notation of tubes for textured yarns
ISIRI 2587-5;Textile machinery and accessories Cylindrical tubes - Part 5: Dimensions, tolerances and notation of tubes for continuously spun synthetic filament yarns
ISIRI 2587-6; Textile machinery and accessories Cylindrical tubes - Part 6: Dimensional tolerances and tube notation for cross-wrapped packages in winding and twisting
ISIRI 2587-7;Textile machinery and accessories Cylindrical tubes - Part 7: Dimensions, tolerances and notation of perforated tubes for cheese dyeing
SECRET 259-1; Saffron - Specification
ISIRI 259-2; Saffron - Test methods
ISIRI 2620-11; Power transformers - Part 11: Dry-type transformers
ISIRI 2620-13;Power transformers - Part 13: Self-protected liquid-filled transformers
ISIRI 2620-15;Power transformers - Part 15:Gas-filled power transformers
ISIRI 2636-2-1; Packing of Winding Wires - Part 2: Cylindrical barrel lead rollers - Part One - Basic dimensions
ISIRI 2636-2-2; Packing of winding wires Part 2: Delivery reels with tapered barrel. Part 2: Specifications for refillable reels made of thermoplastic material
ISIRI 2636-2-3; Packing of Winding Wires - Part 2 : Cylindrical barrel - delivery rollers - Part 3 - Specification for non-return rollers made of thermoplastic material
ISIRI 2636-3-1; Packing of Winding Wires - Part 3: Conical Barrel Delivery Reels - Part One - Basic dimensions
ISIRI 2636-3-2; Packing of winding wires Part3: Conical Barrellde Delivery Reels - Part 2 - Specifications for Returnable Reels Made of Thermoplastic Material
ISIRI 2636-3-3; Packing of winding wires Part 3: Conical Barrel Delivery Reels‐ Part 3- Specifications for Non-Returnable Reels Made of Thermoplastic Material
ISIRI 2636-3-4; Packing of Winding Wires - Part 3: Conical Barrel Delivery Reels - Part 4 - Basic Dimensions of Containers for Tapered Barrel delivery reels
ISIRI 2636-3-5;Packing of Winding Wires-Part3:Delivery Reels in Conical Barrell-Chapter5- Specifications for Reel containers Made of Thermoplastic Material
ISIRI 2636-4-1; Packing of Winding Wires - Part 4-1 : Test methods - Delivery reels made of thermoplastic material
ISIRI 269-1;Specifications for gypsum building plaster - Part 1: Cypsum Building Plasler
ISIRI 269-2; Specifications for gypsum plaster - Part 2: Pre-mixed lightweight plaster
ISIRI 2776-1;Commercial vehicles – Dimensions of air cleaner elements –Part 1: Types A and B
ISIRI 2876-2; Determination of cadmium content in fruits, vegetables and derivative products - Part 2: Method using flame atomic absorption spectrometry
ISIRI 2909-1; Application beam on building floor - Specification and Test methods
ISIRI 2909-2; Roof application blocks on building floor Specification and test methods
ISIRI 2930-6; Additives for concrete, mortar and mortar - Part 6: Sampling, conformity control and evaluation of conformity
ISIRI 2970-2; Code of practice for the freezing and storage of fish and products at sea
ISIRI 2970-3; Implementing regulation on freezing and staging of fish and fish products on the coast
ISIRI 3001-1;Sterilization of medical devices Sterility tests Part 1: Direct methods
ISIRI 3001-2;Sterilization of medical devices - Sterility Tests Part 2: Filtration method
ISIRI 30-1;TEXTILE - FIBERS AND YARNS - COMMERCIAL SHIPMENT CULT FESTINATION - CHAPTER 1: MASS DETERMINATION AND PREPARATIONS
ISIRI 30-2;Textiles - fibers and yarns - determination of commercial mass of consignments - Part2: method for obtaining laboratory samples
ISIRI 30-3; Determination of the commercial mass of the consignment of textile fibers and yarns - Part 3: Selection cleaning procedures
ISIRI 3081-1;Tests on electrical cables under fire conditions Part 1:Test on a single vertical insulated wire or cable
ISIRI 3081-1-1;Tests on electrical and fiber optic cables under fire conditions - Part 1-1:Testing for vertical flame propagation for a single insulated wire or cable - Apparatus
ISIRI 3081-1-2;Tests on electrical and fiber optic cables in fire conditions - Part 1-2: Vertical flame propagation test for a single insulated wire or cable - Procedure for 1 kW premixed flame
ISIRI 3081-1-3;Tests on electrical and fiber optic cables under fire conditions Part 1-3: Vertical flame propagation test for a single insulated wire or cable - Procedure for identification of flaming droplets/particles
ISIRI 3081-2;Tests on electrical cables under fire conditions Part 2:Test on a single small vertical insulated copper wire or cables
ISIRI 3081-2-1;Tests on electrical and fiber optic cables under fire conditions - Part 2-1:Vertical flame propagation test for a single insulated wire or cable - Apparatus
ISIRI 3081-2-2;Tests on electrical and fiber optic cables under fire conditions - Part 2-2:Test for vertical flame propagation for a single insulated wire or cable - Procedure for diffusion flame
ISIRI 3081-3-10;Tests on electrical cables in fire conditions- Part 3-10:Test Apparatus for vertical flame propagation of vertically mounted bundled wires or cables
ISIRI 3081-3‐21;Tests on electrical cables in fire conditions Part 3-21:Test for vertical flame propagation of bundled wires or cables mounted vertically - category AF/R

Product Tests

ISIRI (Iranian Standards and Industrial Research Institute) Tests Part 10

Product Tests

OTHER TESTS

Get Offer Now

Contact Us

Causes EUROLAB?

Accreditations

Quality Policy

Mission and Vision

Privacy Policy

About Us

Product Tests

ISIRI (Iranian Standards and Industrial Research Institute) Tests Part 10

Product Tests

OTHER TESTS

Get Offer Now

Contact Us