In EN 45545-2, test product numbers are assigned according to the product family (classification according to the application), and the R number, which is the test requirement number, is determined according to the product number.
The test is done according to the detailed procedure in each selected standard according to the R number, and the result decides whether the value meets the design criteria.
1) ISO 11925-2; Response to fire tests – Flammability of building products exposed to direct flame exposure – Part 2: Single flame source test.
– Ø:18 (9 unidirectional and 9 vertical), @ 90 mm x 250 mm.
2) ISO 9239-1; Fire reaction tests for floors – Part 1: Determination of combustion behavior using a radiant heat source.
– Example Conditions: 10 (5 in one direction and 5 in vertical directions), @ 230 mm x 1050 mm.
3) EN 13501-1; Fire classification of building materials and building elements. Classification using test data obtained from fire reaction tests.
– Example conditions: Different conditions for each class
4) IEC/TS 60695-1-40; Fire hazard test – Part 1-40: Guide for assessing the fire hazard of electrotechnical products – Insulating fluids
5) EN 60332-1-2; Fire reaction, Tests on electrical and fiber optic cables under fire conditions – Part 1 – 2: Vertical flame spread test for a single insulated wire or cable – Procedure for a 1 kW pre-mixed flame.
– Example conditions: see EN 13501
6) EN 60332-3-24; Tests on electrical and fiber optic cables under fire conditions - Part 3-24: Test for vertical flame propagation of vertically mounted bundled wires or cables - Category C
7) EN 50305: Railway applications. Railway wagon cables with specific fire performance. Test methods.
8) EN 61034-2; Fire reaction, Measurement of smoke density of burning electrical cables under defined conditions – Part 2: Test procedure and requirements.
9) ISO 9705-2; FIRE REACTION TESTS — FULL-SCALE CHAMBER TESTS FOR SURFACE PRODUCTS — PART 2: TECHNICAL BACKGROUND AND GUIDELINES
10) ISO 12952-2; TEXTILES - ASSESSMENT OF FLAMMABILITY OF BEDDING PARTS - PART 2: IGNITION SOURCE: BUFF FLAME EQUIVALENT
11) ISO 4589-2; PLASTICS — DETERMINATION OF COMBUSTION BEHAVIOR BY OXYGEN INDEX — PART 2: AMBIENT TEMPERATURE TEST
12) ISO 60695-2-11; Fire hazard test - Part 2-11: Glowing/hot wire based test methods - Glowing wire flammability test method for final products (GWEPT)
13) EN 60695-11-10: Fire hazard test – Part 11-10: Test flames – 50 W horizontal and vertical flame test methods
To get an appointment, to get more detailed information or to request an evaluation, you can ask us to fill in our form and reach you.
