BMW Standards Tests

Automakers have merged in the past, so there are many cases where these features are widely used by every automaker. In addition, LV 112 and LV 214 standards for electrical connectors are being developed with the joint participation of automobile manufacturers such as Audi, BMW, Daimer, Porsche and Volkswagen. 

Therefore, Daiiller, Benz, Chrysler, Volkswagen, Renault, Nissan etc. Please check the standard number regardless of the name of the finished vehicle manufacturer, such as Among these features, the name of the finished vehicle does not matter.

Below we support every test related to BMW standards.

1. BMW 2 754 531.6; Features Carpet Foot Mat 2 Carpet Foot Mat-
2. BMW 3.2.10; Print Behavior Without Foam Print Depth, 60 Minutes and 24 Hours DIN 54316 / En20 105 A02
3. BMW 3.2.10.2; At 60 Degrees C, Depth of View at 60 Minutes and 24 Hours
Tested 4. BMW 3.2.10.22; Depth of View at 60 Degrees C in 60 Minutes 24 Hours
Tested 5. BMW 3.2.10.3; Wet Test After 50 Minute Soak, 60 Minute, and 24 Hour Depth of Display
6. BMW 3.2.10.33; Wet Tested After 50 Minutes Soak, Impression Depth At 60 Minutes 24 Hours
7. BMW 3.2.4.2; Pile Yarn Thicknessautomotive Ms Test
8. BMW 3.2.4.3; Pile Weight
9. BMW 3.2.7; Number of Tufts
10. BMW 3.3.1; Abrasion Resistance with Weight Loss and Color Change DIN 53 109 & EN 20 105 A02
11. BMW 3.3.2; Color Fastness Light (1 Cycle Blue Wool, 2 Cycles Gray Scale) (ISO 105 B06)
12. BMW 3.3.3; Color Fastness Against Wet and Dry Cracking ISO 105 X12
13. BMW 3.3.4; Surface Resistance (DIN 345 ​​T6)
14. BMW 3.3.5; Rot Resistance (VDA 270)
15. BMW 3.3.6; Odor Test (VDA 270)
16. BMW 3.3.8; Accelerated Soiling After Vacuuming and Cleaning PR 121.2
17. BMW 3.5.1; Total Thickness (ISO 1765)
18. BMW 3.5.2; Total Weight (ISO 8543)
19. BMW 3.5.3; Tensile Strength ISO 13 934 T1 BMW 3.5.4 Elongation
20. BMW 3.5.6; Dimensional Stability (ISO 13 934 T1)
21. BMW 6951; dimensional stability
22. BMW 6951 680.6; Dimensional Stability
23. BMW 8 121 649.6; Features Safety Net section Net-
24. BMW 9 170 596.6 Index B / PR 080.3-§ 4.3.2-§ 4.3.2; Surge Test (Seat Heater Only), Surge Test (seat heater only) PR components in seat cover system – Compatibility and continuous loading method
25. BMW AA 0129; CASS Test
26. BMW AA 0616; Weight Change with Contact Storage Determination of Weight Change with Contact Storage-
27. BMW AA P 098; Schälfestigkeit von Klebebänder
28. BMW AA P 194; Resistance Test
29. BMW AA-0026; Aging Resistance Test
30. BMW AA-0053; Resistant Sunscreen Painted Surfaces
31. BMW AA0054; Resistance of Coatings to Car Washing Machines
32. BMW AA-0054; Resistance of Coatings to Car Washing Machines
33. BMW AA-0055; Chemical Resistance Test of Surfaces
34. BMW AA-0061; HPLC
Formaldehyde Emissions from Non-Metallic Materials and Components Determined by 35. BMW AA-0079; Determination of Multiple Impact Stone Chip Resistance
36. BMW AA-0106; HPLC
37 and Determination of Organic Substances. BMW AA-0129; Cass Test (Copper Chloride-Acetic Acid Salt Spray Test)
38. BMW AA-0134; Crockmeter
39 Dry Scratch Resistance Test Using . BMW AA-0136;
. 40 Testing Water Jet Resistance . BMW AA-0150; Yellowing of Varnishes
41. BMW AA-0175; Galvanostatic Cathodic Polarization Corrosion Short-Term Test on Coated Steel
42. BMW AA-0180; Cross Scan Test
43. BMW AA-0203; Hydrolysis Test
44. BMW AA-0213; Condensate Constant
45. BMW AA0224; Cyclic Corrosion Test
46. ​​BMW AA-0224; Cyclic Corrosion Test
47. BMW AA-0235; Accelerated Weathering Crack Stability
48. BMW AA-0236; Accelerated Weathering Color Stability
49. BMW AA0246; Corrosion Test of Test Samples
Placement at 50 . BMW AA-0257; Structure and Gloss Measurement on Painted Surfaces
51. BMW AA-0264; Multiple Stone Chip Testing with Salt Water Exposure
52. BMW AA-0324; Salt Spray-Test
53. BMW AA-0326; Shell Corrosion Test
54. BMW AA-0328; Peel Resistance of Adhesive Tapes
55. BMW AA-0340; Scalpel Cut Cfk-Parts with Transparent Coating
56. BMW AA-0354; Technical Understanding of Color Measurement and Initial and Serial Release
57 for Measurement of Test Panels. BMW AA-0386; Glass Adhesives Uv Resistance
58. BMW AA-0471; Wear Resistance Using Abrex® Test Equipment
59. BMW AA-0557; Light Transmission of Enamels on Car Glass
60. BMW AA-P 098; Peel Strength of Adhesive Tapes
61. BMW AA-P 107 (PA-P 100); Determining the Reflectometer Value
62. BMW AA-P 177; Cross Scan Test
63. BMW AA-P 177 (PA-P 028); Cross Cut Test
64. BMW AA-P 187; Multi-Stone Chip Test Salt Water Exposure
65. BMW AA-P 192; Determination of Multiple Stone Chip Strength
66. BMW AA-P 193; Single Impact Test
67. BMW AA-P 194; Chemical Resistance
68. BMW AA-P 194, method 1; Chemical Resistance of Surfaces Chemical Resistance Test-
69. BMW AA-P 194, method 2; Chemical Resistance of Surfaces Chemical Resistance Test, Method 2-
70. BMW AA-P 224; Condensate Water Constant Atmosphere Test
71. BMW AA-P 224 (PA-P 208); Constant Climate Concentration
72. BMW AA-P 225; Cass
73. BMW AA-P 257; Sun Lotion Resistance of Painted Parts to Indoor Sun Lotion -
74. BMW AA-P 259; Mar Resistance (Crockmeter)Crockmeter-
Mar Resistance Test Using 75. BMW AA-P 260; Accelerated Weathering Accelerated Weathering – Crack Resistance-
76. BMW AA-P 275; Aging Resistance Test Aging Resistance Test –
77. BMW AA-P 275 (PA-P 230); Aging Test
78. BMW AA-P 276; Temperature Cycle Test Temperature Cycle Test –
79. BMW AA-P 276 (PA-P 231); Temperature Cycle Test
80. BMW AA-P 288; Accelerated Weathering Color Stability
81. BMW AA-P 290; Steam Jet Testing of Steam Jet Cleaner Coatings
Test- 82. BMW AA-P 296; Abrasion Resistance Using Abrex Test Equipment Abrasion Resistance Using Abrex Test Equipment (Dry + Test Environment to Gs 97045)-
83. BMW AA-P 296 (PA-P 315); Abrex Standard Tester
Abrasion Resistance with 84. BMW AA-P 308; Hydrolysis Test
85. BMW AA-P 319; Scalpel Cut Scalpel Cut Cfk-Parts with Transparent Coating-
86. BMW AA-P107; Reflectometer Value (Glossy).
87. BMW AA-P116; Color Measurement and Instrumental Release of Main Panels and Party Panels
88. BMW AA-P117;
Color Measurement on Body and Panels 89. BMW AAP123; Structure and Gloss Measurement on Painted Surfaces
90. BMW AA-P124; Visual Color Comparison and Metamerism Test.
91. BMW AA-P175; Alternative Corrosion Test
92. BMW AA-P177; Cross Hatch
93. BMW AA-P184; Salt Spray Test
94. BMW AAP187; Multiple Stone Chip Testing with Salt Water Exposure
95. BMW AAP192; Determination of Multiple Stone Chip Resistance
96. BMW AA-P194; Chemical Resistance Test of Surfaces.
97. BMW AAP224; Condensate Water Constant Atmosphere Test
98. BMW AAP225; Cass Test
99. BMW AA-P257; Sun of Interior Painted Pieces
Resistance to Lotion 100. BMW AA-P259;
Mar Resistance Test Using Crockmeter 101. BMW AAP260; Accelerated Weathering Crack Resistance
102. BMW AAP275; Aging Resistance Test
103. BMW AAP276; Temperature Cycle Test
104. BMW AAP288; Accelerated Weathering Color Stability
105. BMW AAP290; Vapor Spray Resistance of Coatings
106. BMW AA-P296; Wear Resistance Using Abrex® Test Equipment.
107. BMW AA-P296 (AA-P 296); Wear Resistance Using Abrex Testers. / Wear Resistance Using Abrex Testers.
108. BMW AA-P-308; Hydrolysis Test
109. BMW AUTOMOTIVE 3.2.4.2; Pile Yarn Thickness
110. BMW AUTOMOTIVE 3.2.4.3; Pile Weight
111. BMW TP 303.5; Alternative Climate Test Trim Parts
112. BMW_PR 303.5c; Alternative Climate Test
113. BMW BMWTS307-3; Evaluation of Scratch Susceptibility of Component Surfaces
114. BMW GS 90010; Types Surface Protection Metal
115. BMW GS 90011; Organic Coating Parts Made Of Metal
116. BMW GS 93008-4; Limits for Components and Emissions in Materials and Components, Limit Values ​​for Components and Emissions in Materials and Components
117. BMW GS 93010-2; Elastomers (Test Methods and Material Properties Tolerances), Elastomers (Test Procedures and Tolerances for Material Properties)
118. BMW GS 93010-2-§ 7.6.1.1; Bending Stress at Low Temperatures (“R” Index) Bending stress at low temperatures (“R” index) Elastomers – Test procedures and tolerances for material properties
119. BMW GS 93010-3; Elastomers (Material Properties, Use of Keys, Test Environment), Elastomer (Material Properties, Application Keys, Test Environment)
120. BMW GS 93011-1; Determination of Combustion Residual Elastomers - Identification, Halogen-Free Elastomers
Ignition Residue Determination (950°C)- 121. BMW GS 93011-2; Determination of Combustion Residual Elastomers - Identification, Determination of Residue in Ignition of Elastomers Containing Chlorine, Bromine or Iodine (950°C)-
122. BMW GS 93011-3; Elastomers - Identification, Identification of Extractable Components by Cyclohexane / Acetone Extraction - Identification, Cyclohexane / Acetone
Identification of Extractable Components by Extraction Using 123. BMW GS 93011-4; Elastomers – Identification, Thermogravimetry (TG)
Determination of Thermal Decay Behavior Through Elastomers – Identification, Determination of Thermal Decay Behavior Using Thermogravimetric (TG) 124. BMW GS 93011-5; Elastomers – Identification, Determination of Cold Guide Value by Differential Scanning Calorimetry (DSC) Elastomers – Identification, Determination of Low Temperature Standard Value by Differential Scanning Calorimetry (DSC)
125. BMW GS 93011-6; Elastomers - Identification, Infrared Spectroscopic Analysis (Ir), Pyrolysis-Ir Elastomers - Identification, Analysis by Infrared Spectroscopy (Ir), Pyrolysis Ir
126. BMW GS 93011-7; Elastomers – Property Determination Methods Determination of Coloring of Organic Materials with Elastomers (Lacquer Indifference)
127. BMW GS 93011-7-A; Paint indifference Method A: Immigration Contact Color Change and Environmental Color Change Due to Elastomers - Determination of Properties, Test Methods for Determining Color Change Due to Elastomers (Dye Indifference) Method A: Contact Color Change and Environmental Color Change Due to Migration
128. BMW GS 93011 -7-B; Dye indifference Method B: Washing Effect Elastomers - Determination of Properties, Test Methods for Determining Color Change of Organic Materials Due to Elastomers (Dye Indifference) Method B: Determination of Washing Effect
129. BMW GS 93011-8; Elastomers – Property Detection, Contact of Plastics with Elastomers
Determination of Stress Cracking Resistance Elastomers - Determination of Properties, Determination of Tensile Cracking Resistance of Plastics in Contact with Elastomer 130. BMW GS 93011-9; Elastomers – Property Determination, Effect of Temperature, Bending Stress in Cold Elastomers – Determination of Properties, Effect of Temperature, Low Temperature Bending Test
131. BMW GS 93012 1; Odolnost elastometry, Tepelné stárnutí
132. BMW GS 93012-1; Elastomers – Heat Aging
133. BMW GS 93012-2; Elastomers – Determination of Resistance to Test Oils
134. BMW GS 93012-3; Elastomers - Determination of Resistance to Test Fuels
135. BMW GS 93012-4; Elastomers – Determination of Resistance to Coolants
136. BMW GS 93012-5; Elastomers _ Determining Resistance to Brake Fluids
137. BMW GS 93012-6; Elastomers –
Determining Grease Test Resistance 138. BMW GS 93012-7; Elastomers – Coolant
Determining Resistance to Substances 139. BMW GS 93026-1; Interior textiles – Requirements and
Tests Standard requirements for textiles used in the interior of the vehicle.- 140. BMW GS 93026-1-§ 5.1.3; Water stain fastness, water stain fastnessVehicle interior textile – requirements and Tests
141. BMW GS 93039; PVC Artificial Leather for Flooring Area –
Requirements and Tests for PVC Synthetic Leather (PVC-P) for Floor Area and Adjacent Areas Regardless of Vehicles.- 142. BMW GS 94007; Coatings on Plastic Parts – Painted Plastic Parts, MotoRCArs.- Requirements and Tests for Exterior, Engine Compartment and All Painted Plastic Parts (Single and Multi-Ply Painting) in Exterior.-
143. BMW GS 95003-4; Environmental Tests
144. BMW GS 95003-4 (GS 95003-4); motorized
Electrical / Electronic Devices in Vehicles / Electrical / Electronic Devices in Motor Vehicles 145. BMW GS 95003-5; Chemical Resistance
146. BMW GS 95011-4; Printed Circuit Boards in Motor Vehicles, BetauungsPR üfung Printed Circuit Boards in Motor Vehicles (Pcbs), Dew Test
147. BMW GS 95024-2-1.; Electrical Electronic Components Motor Vehicles. Electrical Requirements Test
148. BMW GS 97012; PVC-Slush Coated Trim Parts Delivery and Quality Conditions of PVC-Slush Coating in Vehicle.-
149. BMW GS 97013; Pur-Spray skin Coated Trim Parts. E.g. Complete Instrument Panels-
150. BMW GS 97014-1; Measurement of Emissions in Fuel Rooms, Determination of Volatile Organic Emissions from Fuel Oil and KraftstoffdampführendEN Components, Measurement of Emissions in Fuel Rooms, Determination of Volatile, Organic Emissions from Components Carrying Fuel or Fuel Vapor
151. BMW GS 97014-2; Emissions Measurement in Stable Rooms – Volatile Organic Emissions of Components of Semi-Finished Parts and Fuel
Identification of Non-Bearing Material Samples 152. BMW GS 97014-3; Emission Measurement with Air Exchange in a Test Chamber
153. BMW GS 97014-3 (GS 97014-3); Emission Measurement with Air Exchange in a Test Chamber / Emission Measurement with Air Exchange in a Test Chamber
154. BMW GS 97014-4; Emission Measurement with Air Exchange in a Test Chamber – Odor
Determining Receiving Behavior 155. BMW GS 97017; Galvanized Plastic Parts, Electroplated Plastic Parts
156. BMW GS 97018;
157 Determining By Test- Blow Counter Behavior. BMW GS 97019 E; Coat Standard
158. BMW GS 97028-3; Structural Adhesive
159. BMW GS 97033; Scratch Test - Surface Inspection of Automotive Interior Materials
160. BMW GS 97034; Manual Abrasion Test of Motor Vehicle Interior Materials.
161. BMW GS 97034 1; Surface test of vehicle interior materials, hand wear test
162. BMW GS 97034 2; Surface of vehicle interior materials
test , nail test 163. BMW GS 97034 3; Surface of vehicle interior materials
test , sole test 164. BMW GS 97034-1; Surface Test of Motor Vehicle Interior Materials - Manual Abrasion Test
165. BMW GS 97034-10; Surface Testing of Motor Vehicle Interior Materials - Scratch and Abrasion Resistance
166. BMW GS 97034-2; Surface Test of Motor Vehicle Interior Materials – Nail Test
167. BMW GS 97034-3; Surface Test of Motor Vehicle Interior Materials – Shoe Sole Test
168. BMW GS 97034-3 / PR 513; Shoe Sole Test Surface Test of Motor Vehicle Interior Materials - Shoe Sole Test -
169. BMW GS 97034-4; Surface Testing of Motor Vehicle Interior Materials – Color Wear Behavior
170. BMW GS 97034-4-A; Color Wear Behavior (Abrex) Surface Test of Motor Vehicle Interior Materials – Color Wear Behavior (Test Procedure A- Abrex)
171. BMW GS 97034-4-B; Color Wear Behavior (Crockmeter) Surface Test of Motor Vehicle Interior Materials – Color Wear Behavior (Test Procedure B- Crockmeter)
172. BMW GS 97034-4-C; Color Wear Behavior of Motor Vehicle Interior Materials (Veslic) Surface Test – Color Wear Behavior (Test Procedure C- Veslic)
173. BMW GS 97034-5; Surface Testing of Motor Vehicle Interior Materials - Resistance to Cleaning Agents.
174. BMW GS 97034-5-A; Resistance to Cleaning Agents Surface Test of Motor Vehicle Interior Materials - Resistance to Cleaning Agents -
175. BMW GS 97034-5-B; Resistance to Cleaning Agents Surface Test of Motor Vehicle Interior Materials - Resistance to Cleaning Agents -
176. BMW GS 97034-5-C; Resistance to Cleaning Agents Surface Test of Motor Vehicle Interior Materials – Resistance to Cleaning Agents-
177. BMW GS 97034-6; Surface Inspection, Contamination and Cleanability of Automotive Interior Materials Surface Testing, Contamination Behavior and Cleaning Ability of Motor Vehicle Interior Materials
178. BMW GS 97034-6-A; Contamination Behavior and Cleaning Ability (Abrex) Surface Test of Motor Vehicle Interior Materials - Contamination Behavior and Cleaning Ability - A-
179. BMW GS 97034-6-B; Soiling Behavior and Cleaning Ability (Martindale) Surface Testing, Contamination Behavior and Cleaning Ability of Motor Vehicle Interior Materials (Test Procedure B- Martindale)
180. BMW GS 97034-7; Surface Test of Motor Vehicle Interior Materials – Drop Test
181. BMW GS 97034-8; Surface Inspection of Automotive Interior Materials, Writing
Determination of Slope of Motor Vehicle Interiors Surface Testing, Determination of Scratch Slope 182. BMW GS 97034-9; Surface Test of Motor Vehicle Interior Materials - Scratch Test.
183. BMW GS 97038; Determination of Combustion Behavior of Automotive Interior Upholstery Materials
184. BMW GS 97045-1; Painted Plastic Parts Interior & Exterior
185. BMW GS 97045-2; Painted Plastic Parts Interior & Exterior
186. BMW GS 97050; Trim Parts Complete Instrument Panels with Imc-Tpu-Slush Coatinge.G -
187. BMW GS 97073-2; Environmental Tests – Vibration Testing – Testing of Engine Attachments
188. BMW GS 97102; Decorative, Physical Vapor Deposition Coated (PVD) Stainless Steel Surfaces for Stainless Steel and Chrome Surfaces and PVD Coatings on Chromated Surfaces.
189. BMW ISO 2409; Cross Cut Test
190. BMW LH 10304977-000-04; Luggage compartment lining Luggage compartment lining-
191. BMW LH 10511919-000-01 F45; Luggage compartment lining Luggage compartment lining-
192. BMW LH 6 955 885.6; Hardness Test with Steel Balls, Pp. 30+ Media Resistance
193. BMW MBN LV 123; Electrical Properties Electrical Safety High Voltage Components Road Vehicles-Requirements Test
194. BMW MBN LV-124; Electrical Electronic Components Motor Vehicles Up to 3,5T-General Requirements, Test Conditions Tests
195. BMW MBN LV-148; Electrical Electronic Components Vehicle 48V-Vehicle Electrical System Requirements Test
196. BMW N 600 45.0; Self Adhesive Labels Information
197. BMW N 600 91.0, Teil 33; Paints, Special Requirements for Painting Plastic Parts Internal and
Single and Multi-Ply Coatings of Plastic Parts Outside - 198. BMW N 601 21.0; Determination of Combustion Behavior of Materials Used in Automotive Interior Upholstery Materials Determination of Combustion Behavior in Automotive Interior Upholstery Materials
199. BMW N60139-0; Soundproof Part of Motor Vehicle - Limiting Resistor
200. BMW PA C-307 / TD G CB SOP 5.4 111 G 0 (GC-MS); Phthalate Detection Airborne Phthalate Detection Using Gc-Ms-
201. BMW PA-N 150; Effective Pile Mass per Unit Area and Thickness and Stitch Ratio On Back Effective Pile Mass Per Unit Area, Determination of Effective Pile Thickness and Stitch Ratio for Carpets and Mats, Strip Knife Cutting Machine Method-
202. BMW PA-P 028 ; Cross Scan Test
203. BMW PA-P 100; Determining the Reflectometer Value (Glossy)
204. BMW PA-P 208; Condensation Water Stable Atmosphere Test Condensation Water Stable Atmosphere Test –
205. BMW PA-P 230; Aging Resistance Test Aging Resistance Test –
206. BMW PA-P 231; Temperature Cycle Test Temperature Cycle Test –
207. BMW PA-P 250; Visual Color Comparison and Metamerism Test Visual Color Comparison and Metamerism Test –
208. BMW PA-P 295; Sunscreen Lotion and Paint Compatibility
Paint Compatibility with Protective Lotion 209. BMW PA-P 315; Abrasion Resistance Using Abrex Test Equipment Abrasion Resistance Using Abrex Test Equipment (Bmw Aa-P
Dry vs. 077 + Test Environment)- 210. BMW PAP028; Cross Hatch test
211. BMW PAP195; Accelerated Weathering Crack Resistance
212. BMW PAP206; Determination of Multiple Impact Stone Chip Resistance
213. BMW PAP208; Condensate Water Constant Atmosphere Test
214. BMW PAP230; Aging Resistance Test
215. BMW PAP231; Temperature Cycle Test
216. BMW PAP232; Humidity / Low Temperature Load
217. BMW PAP234; Determination of Film Thickness in Painted Plastic Parts
218. BMW PAP235; Determination of Film Thickness in Painted Plastic Parts (Linolium-Knife-Method)
219. BMW PA-P245; Chemical Resistance of E-Coat, Primer and Varnish Systems
220. BMW PAP267; Accelerated Weathering Color Stability
221. BMW PAP279; Steam Spray Cleaner Test of Coatings
222. BMW PAP295; Sunscreen Lotion
Paint Compatibility of Internal Parts with 223. BMW PDT NVB 10 021Rev G; Copolymer Polyacetal Medium Flow
224. BMW PR 100.3; Pr/ Test Specification Post Covers for Pillar Trim (And Windshield Cover, Air Outlet Grille, Rollover Protection System Cover for Cabriolet), Direct Fittings Included.
225. BMW PR 100§2.8.3.1; Hardness Test BMW PR 100§2.8.3.1 Hardness Test –
226. BMW PR 102.3; Shape the Sky with Frame and Console
227. BMW PR 102.4-§ 2.4.3; Determination of Air Permeability of Sample Plates (Ceiling) -
228. BMW PR 102.6; with attachment
Headliner with Headliner Attachment 229. BMW PR 103.4; Pr Blinds
230. BMW PR 104 §2.6.4.5; Endurance Test BMW PR 104 §2.6.4.5 – Seat Belt Release Termination Endurance Test –
231. BMW PR 104.3; Test Specification – Attached Rear Rack for Fixed, Movable and Multi-Part Storage Racks – Direct Mounts Included.-
232. BMW PR 121.2; Spotting and Cleanability Spotting and Cleanability Behavior of Surface Material-
233. BMW PR 121.3; Spotting and Cleanability Spotting and Cleanability Behavior of Surface Material-
234. BMW PR 203; PR Window Lifts Window Regulator Test Specification
235. BMW PR 226; Front Cover Panel
236. BMW PR 231; PR Door Sealing System Tp Door Sealing System
237. BMW PR 231-§ 2.2.13.4 (Kalahari mode); Weathering Resistance, Dry-Hot Climate (EG Kalahari, Arizona, South America) Simulated Exterior Parts
Decomposed / Kalahari-Mode- 238. BMW PR 231-§ 2.2.13.5 (Florida mode); Weathering Resistance (Humidity-Hot Climate, EG Florida) Simulated Weathering of Exterior Parts / Florida-Mode-
239. BMW PR 292; Pr Underbody Test Specification, Underbody
Explains Conservation of Connected Parts in 240. BMW PR 292-§ 2.1.20; Pyrolysis-Gc/Ms attachments Underbody – Gas Chromatography / Mass Spectrometry (Pyrolysis-Gc-Ms)-
241. BMW PR 303; Climate Change Test Equipment Parts
242. BMW PR 303.4; Climate Change Testing for Equipment Parts
243. BMW PR 303.5; Climate Cycle Test for Equipment Parts Climate Cycle Test -
244. BMW PR 303-4; Additional Mats-Bmw Environmental
245. BMW PR 306.4; Solar Simulation for Equipment Parts
246. BMW PR 306.4c; Solar Simulation – Part C- Direct Radiation of Exterior and Interior Components (Test Environment C, 85 °C)
247. BMW PR 306.5 part e; Solar Simulation for Flooring Parts Solar Simulation, Part E- Exterior Extension Parts
248. BMW PR 306.5-2014-04; Solar Simulation for Flooring Parts – Part F: Complete Vehicle
249. BMW PR 307.4; Evaluation of Scratch Susceptibility of Component Surfaces
250. BMW PR 307.4-§ 2.1; Gloss Test evaluation of Scratch Susceptibility of Component Surfaces, § 2.1 Gloss Test –
251. BMW PR 307.4-§ 2.2; Shear Test evaluation of Scratch Susceptibility of Component Surfaces, § 2.2 Shear Test –
252. BMW PR 307.4-§ 5.1; Evaluation of Scratch Susceptibility of Steel Wool Abrasion Test Component Surfaces, § 5.1 Steel Wool Abrasion Test
-253. BMW PR 307.4-§ 5.3; Component Surfaces
Drop Test evaluation of Scratch Susceptibility, § 5.3 Drop Test – 254. BMW PR 308.1; Climatic Testing of Adhesive Bonds for Trim Parts
255. BMW PR 308.2; Climatic Test Connected Joints
256. BMW PR 357; Dimensional Stability-Determination of the Dimensional Stability of Vehicle Interior and Seat Covers in Extreme Climate Conditions-
257. BMW PR 360; Wearing Taber-
258 Wear Using . BMW PR 363.1; Cleanability After Contamination with Smoked Flour and Fine- and Wall Sand Cleaning Ability of Surface Materials with Smoked Flour and Fine- and Wall Sand
259. BMW PR 368; Seam Strength for Textiles Seam Strength -
260. BMW PR 372 §2.1.7.1; Hardness Test BMW PR 372 §2.1.7.1 – Hardness Test –
261. BMW PR 372.3; Plastic Parts in Luggage and Passenger Compartment Bottom.G. Side Trim, Floor Area
262. BMW PR 372-§ 2.1.6.1; Weight Load Static BMW PR 372 – Weight Load Static-
263. BMW PR 372-§ 2.1.6.2; Weight Loading Dynamic BMW PR 372 – Dynamic Weight Loading-
264. BMW PR 373; Luggage Loading Truck Loading-
265. BMW PR 375.2; Textile Lining Pieces and Sound Insulation in the Luggage Compartment.G. Cover Trunk, Rack, Mat
266. BMW PR 380 2.2.5; Adhesion Force
267. BMW PR 380 2.3.1; DIN EN 388
Penetration Force by 268. BMW PR 380 2.3.2; Tension Test DIN EN 29073-3
269. BMW PR 380 2.3.4.2; Separation Force Test DIN 54 310
270. BMW PR 380 2.3.4.3; Separation Force Between Back Cover Pad According to DIN 54 310 271
. BMW PR 380 2.3.4.4; Adhesive Sticking Test Bmw BMW PR 308
272. BMW PR 380 2.3.5; Adhesive Strong Mop Flooring
273. BMW PR 380 2.3.6; Intermediate Test BMW BMW PR 384
274. BMW PR 380 2.4.1.1; Shear Force at Room Temperature Fsx
275. BMW PR 380 2.4.1.2; Shear Force Fsx at 70°C / 70% RH
276. BMW PR 380 2.4.1.3; Shear Force Fsx Test at -30°C
277. BMW PR 380 2.4.2; Tear Force From Floor Tile Velcro Plate X Direction
278. BMW PR 380 2.4.3; Tear Force From Floor Tile Velcro Plate Z Direction
279. BMW PR 380 2.4.4; Extreme Torque Velcro Plate Swivel Joint
280. BMW PR 380 2.4.5; Holding Force Detection System Z Direction Fhz
281. BMW PR 380 2.4.6; Service Life Test Detection System (Shear Load, Removal)
282. BMW PR 380.3-§ 2.3.1; Penetration Force (Puncture Force) According to DIN EN ISO 388, Penetration force Test specification for Mats – Functional Tests – Mechanical requirements
283. BMW PR 380-§ 2.2.5; Adhesion Test Mats – Separation Force Between Backing and Pad (according to DIN 54310)-
284. BMW PR 381.4; Flooring Flooring Flooring Flooring
285. BMW PR 387.1; Sealing Side Frames for Parts in the Engine Compartment Area
286. BMW PR 388; Cigarette Test
287. BMW PR 389.1; Passenger Compartment Si and Trunk Si - Test Specification-
288. BMW PR 397; Rotting ConsistencyRotting Consistency -
289. BMW PR 399; Edge Thread Pulling Force Edge Thread Pulling Force-
290. BMW PR 401; Felt Resistance felting Velvet Tendency and Dilution Carpet Grades-
291. BMW PR 501 Part 1; Jar Test evaluation of Material Interaction in Internal Parts-
292. BMW PR 501 Part 2; Desiccator Test Verification of In-Vehicle Material Interaction (Desiccator Test) -
293. BMW PR 510; Surface Stability Of Gear Knob Buckles Gear Shift Knob Buckles
294. BMW PR 556; Drop Test Resistance of Indoor Paintless Thermoplastic Surfaces Against Creams -
295. BMW PR V 306.3; sun simulation
296. BMW PR V 307.3; Injection Molded Parts, Injection Molded Parts
297. BMW PR263 (PR 263); Ts Glass
298. BMW PR303.5; climate test
299. BMW PR3112; Components and General Tool
Measurement of Annoying Noise (Crap / Squeak) for 300. BMW PR321-4; Pr Instrumententafel
301. BMW PR363.1; Evaluation of Cleaning Ability of Surface Materials
302. BMW PrV 152; Engine Compartment Shield and Underbody
Engine Compartment Protection and Underbody Covering with or without Foam Support, Foam or Backless 303. BMW Prv 152-§ 2.4; Resistance to the Media
Resistor- 304. BMW PRV 306.3; Sonnen simulation
305. BMW PRV 307.3; Spritzgußteile, Injection molded parts
306. BMW PrV 311.1; Determination of Dimensional Stability of Vehicle Interior and Seat Covers in Extreme Climate Conditions-
307. BMW PRV3063; Simulation Document
308. BMW QS 52009; Qs Pur Foam Soft Seat Support, Backrest and Headrest Soft Foam for All Parts and Assemblies of Front and Rear Seats.
309. BMW QS-Arbeitsanweisung (Martindale); Contamination Behavior and Cleaning Ability Soiling Behavior and Cleaning Ability of the Skin Martindale-
to 310. BMW QV 16006; Co-Extruded Plastic Fuel Lines
311. BMW QV 16007; Corrugated Plastic Fuel Lines
312. BMW QV 34081-2008; Geomet Brakes
313. BMW QV 51061-§ 2.3.2.4 A); Bonding of Anti-friction Coatings, Bonding of anti-friction coatings Sealing elements, flock and anti-friction coatings
314. BMW QV 51061-§ 3.3.1-§ 3.3.1; Textile Abrasion Resistance, Textile abrasion resistance Sealing elements, flock and anti-friction coatings
315. BMW QV 51061-§ 3.3.2-§ 3.3.2; Window Glass Edge Wear, Window Glass Edge Edge Wear Sealing elements, flock and anti-friction coatings
316. BMW QV 51061-§ 3.3.5-§ 3.3.5; Abrasion Resistance of Anti-Friction Coating, Slip of Material over Abrasive Fabric, Wear resistance of anti-friction coating, sliding of material on abrasive fabric Seals, flock and anti-friction coatings
317. BMW QV 51061-§ 3.5-§ 3.5; Peel After Icing, Peel After Icing Seals, flock and anti-friction coatings
318. BMW QV 51154-3.2.2; Peel Test qs Mats – Separation Force Between Backing and Pad (according to DIN 54310)-
319. BMW QV 51241; Under Floor Cover, Under Hood Protector, Wheel Arch Shells (Injection Molded and Non-Woven) and Air Guides Underfloor Trim, Under Hood Protector, Wheel Arch Shells (Injected and Non-Woven) and Air Guides-
Qs for 320. BMW QV 52009; Quality Specification – Pur Foam Soft Parts for Seats, Backrests and Headrests
321. BMW S 601 57.0; Surface Treatment in Trim Area
Not Made Plastic Components 322. BMW S 603 00.0 Part 4; Soft Cellular Materials – Test Procedure and Allowed Tolerances for Flexible Cellular Materials and/or Components.-
323. BMW S 60300.0 Teil 4,-§ 3.11 (DIN 53428-F)-§ 3.11; Water Absorption (according to DIN 53 428 F: Testing of Cellular Materials -
Determination of Resistance to Liquids, Vapors, Gases and Solids) Water AbsorptionSoft foams - Test method and acceptable tolerances 324. BMW S60121-0; Determination of Combustion Behavior in Automotive Interior Upholstery Materials
325. BMW TL 1 932 797.6; Technical Specifications Weaving Technical Specifications Weaving-
326. BMW TL 6 951 680.6; Tufting-Carpet Eurovelours 70Tufting-Carpet-
327. BMW TL 6 979 450.6; Pvc Faux Leather 8 Pvc Faux Leather 8
328. BMW TL 7 044 213.4; Features Abs+PC Recyclate Support Center Console, Reinforcement Door Pocket -
329. BMW TL 7 055 896.6; Pur Sandwich Pur Sandwich
330. BMW TL 7 145 612.6; Features Tufting - Carpet 2003-
331. BMW TL 7 150 150,6; Tufting Carpet Eurovelours 91Tufting Carpet-
332. BMW TL 7 302 281.6- Features; All-weather Floor Mat All-weather Car Mats
333. BMW TL 8 127 520,6; Specification – Sunscreen Knitted Fabrics Unprotected Knitted Fabric-
334. BMW TL 8 165 341.6; Features Carpet Foot Mat Technical Specifications Carpet Foot Mat
1-335. BMW TL 8 186 875.4; Specifications Braided Ribbon Braid Cord for Interior Upholstery -
336. BMW TL 8 236 276.6; Luggage Net PA trunk Net for Interior Trim
337. BMW TL 8 262 216.6; Technical Specifications Ski Bag Material Ski Bag Material-
338. BMW TL 9 169 300.6; All leather for Leather Interior Upholstery.
339. BMW TL 9 192 340.6; Features Luggage Net PP trunk Nets Interior Trim
for 340. BMW TL 9 211 895.6; Technical Delivery Specification – Soundproofing Lightweight Non Woven (Pp/Pet) Lightweight Woven for Outdoor Indoor Indoor FlooringEN-
341. BMW TL-8 165 341.6; Hochflor Teppicheinlegematte 1 Carpet Footwell Mat-
342. BMW TP 303.4; Climate Testing on Plastic and Textile Components
343. BMW TP 303.5; Alternative Climate Test Trim Parts
344. BMW TP 309; Vibration Tester Components
345. BMW TP306-4; Solar Simulation for Exterior and Interior Parts
346. BMW TP309; Vibration Testing for Equipment Components
347. BMW TP326-4; Ts Door Trim Panels and Side Trim Panels
348. BMW TP341-2; Front/Rear Bumper Cover
349. BMW TS 100.1-§ 4.2; Decor Adhesion, Decor Adhesion Test specification
350. BMW TS 326.4; Ts Door Trim Panel, Side Trim Panel
351. BMW VDA 270; Smell Test