Volkswagen Automotive OEM Tests

EUROLAB With its expert team and state-of-the-art laboratories, it offers reliable and unbiased results in automotive tests, as in all other tests.

Automakers have merged in the past, so there are many cases where these features are widely used by every automaker. In addition, LV 112 and LV 214 standards for electrical connectors are being developed with the joint participation of automobile manufacturers such as Audi, BMW, Daimler, Porsche and Volkswagen.

Volkswagen Test Standards List

• VW - PLUS - PR - 04 - 23 - E / 4.1; DX)
• VW – PLUS – PR – 04 – 23 – E/4.1 ; Input/Output Endurance
• VW 2.8.1 ; elastomers. Material requirements and tests. Besides the ozone test
• VW 2.8.1 ; Elastomers - Material Requirements and Tests
• VW 2.8.1 ; Section 3.9 Ozone Resistance
• VW 2.8.1 Para. 3.8 ; Low Temperature Behavior
• VW 2.8.1 Para. 3.9 ; Ozone Resistance
• VW 2.8.1 Para. 3.13; lubrication
• VW 44045 ; Polypropylene Finished Parts – Material Requirements
• VW50105 ; Floor Covering Materials – Requirements Quality Specifications Tests
• VW 50105 Para. 10.7; permanent set
• VW50123 ; Thermoplastic Elastomers – Quality Requirements
• VW 50123 – 4.5.2/6.1,(TGA) ; Thermogravimetric analysis (TGA)
• VW 50125 : Polyamide 6 Finished Parts in the Passenger Compartment – ​​Material Requirements
• VW50127 ; Polyamide 66 Finished Parts in Passenger Compartment – ​​Material Requirements
• VW50129 ; Bonded Coating – Coated Body Gaskets
• VW 50129 Para. 3.13 ; Window Glass Edge Wear
• VW 50129 Para. 3.15 ; Wear with Wear Cloth
• VW50133 ; PA66 for finished parts outside the passenger compartment
• VW 50133 Para. 4.1 ; Workmanship (Withstand Test Environment)
• VW 50133,Pa66 ; For Finished Parts Outside the Vehicle – Material Requirements
• VW50136 ; PBT for finished parts outside the vehicle interior
• VW50180 ; Passenger compartment members; emission behavior
• VW50180 ; Components in the Passenger Compartment – ​​Emission Behavior
• VW 50181 (Fogging ; Determining Fogging Characteristics (Fogging)
• VW50185 ; Vehicle Parts - Open Resistance - Air Segregation
• VW50190 ; Vehicle Interior Trim Components – Colorimetric Evaluation
• VW50190 ; Metrological Evaluation of Color and Gloss Level
• VW 50190 (Color) ; Colorimetric Evaluation
• VW 50190 (Glossy) ; Colorimetric Evaluation
• VW 50195 Para. 3.2.1 ; Solid dye – color measurement (CIELAB)
• VW 52065 ; Cellular Rubber Elastomer Sealant – Material Requirements
• VW 60306 ; Electric cables for motor vehicles, single core, without. General test conditions
• VW60360 ; Adhesive tapes for wiring harnesses in motor vehicles – Guide (Retracted; replaced by VW 60360-1, 2010-08)
• VW 60360-1 ; protection systems for harnesses in motor vehicles – tapes; Instruction
• VW 60360-2; protection systems for harnesses in longitudinal bandages of motor vehicles; Instruction
• VW 75174 ; Automotive Connectors. Instruction
• VW 75205 ; twisted wires
• VW 75206-1 ; High frequency cables, coaxial lines for motor vehicles
• VW 75206-2 ; high frequency lines for unicoaxial motor vehicles
• VW 75210-2 ; Shielded high-voltage sheathed cables for motor vehicles and their electrical drive systems, requirements and tests
• VW 80000 (LV124); Electrical and electronic components in motor vehicles
• VW80101 ; Electrical and electronic components in motor vehicles
• VW 80972 Para. 5.6; Resistance to Chemical Agents
• VW 96136 ; Exterior - Decorative Film / Protective - Requirements and Test Methods
• VW EP 81020.16 ; Screw Interlock
• VW PV 1065 ; Potential Differences and Layer Thicknesses of Nickel Coatings
• VW PV 1200 ; Withstand Environmental Cycle Test
• VW PV 1209 ; Environmental Corrosion Cycle Test
• VW PV 1210 ; Corrosion Test
• VW PV 1217 ; Stone Impact Resistance
• VW PV 1300 ; Thermal Stability Test
• VW PV 1303 ; Light Exposure Test (100°C)
• VW PV 1306 ; Exposure Test for Determination of Adhesion
• VW PV 1323 ; Sun Test
• VW PV 1502 ; Weathering (Resistance to Cracking)
• VW PV 1503 ; Steam Jet Test
• VW PV 2005 – A ; Climate Cycle Resistance; Variant A One Piece
• VW PV 2027 ; tensile load
• VW PV 2034 ; Floating Roller Peel Test (Adhesion Test)
• VW PV 2037 ; Resistance to Preservatives and Cleaning Agents
• VW PV 3.10.7 ; Testing for Substances that Impair Paint Wetting
• VW PV 3.11.1 ; Premium Gasoline Resistance
• VW PV 3.11.2 ; Resistance to FAM test fuel
• VW PV 3.11.3 ; Diesel Fuel Resistance
• VW PV 3.12.1 ; Oil Resistance
• VW PV 3.2.4 ; Gloss Measurement
• VW PV 3015 ; Determining Fogging Characteristics (Fogging G)
• VW PV3307 ; Determination of Plastic and Elastic Deformation
• VW PV 3314 Para. 3.5 ; Tear Strength Between Edge Protection and Hose Or Lip
• VW PV 3316 ; Reference Photos After Ozone Exposure
• VW PV 3340 Para. 4 ; Tensile Strength of Adhesive Seam
• VW PV 3341 ; Non-metallic materials of the automotive Innenrausstattung
• VW PV 3341 ; Determination of the emission of organic compounds (TVOC with HS – GC – FID)
• VW PV 3341 – MS/FID; Determination of the emission of organic compounds (HS – GC – TVOC with FID/MSD)
• VW PV 3353 ; Contamination and Cleanability Behavior
• VW PV 3354 ; Adhesion of the Surface
• VW PV 3356 ; Contamination and Cleanability Behavior
• VW PV 3360 ; Determination of Relief Behavior (Random Drum Pilling Tester)
• VW PV 3361 ; Velcro Closure Test
• VW PV 3366 ; Wear characteristics of flocked material (VW chisel test)
• VW PV 3427 ; Elasticity Test
• VW PV3589 ; automotive wiring – testing dynamic strength
• VW PV 3900 (Variant 1) ; Smell Test
• VW PV 3900 (Variant 2) ; Smell Test
• VW PV 3900 (Variant 3) ; Smell Test
• VW PV3903 ; bending strength
• VW PV3904 ; Flame Retardant (Aging Storage)
• VW PV3905 ; Ball Drop Test
• VW PV3906 ; Wear Behavior
• VW PV3907 ; Brush Wear Test
• VW PV3908 ; Rotary Wear Test (Schopper)
• VW PV3909 ; Static and Permanent Elongation
• VW PV 3920 (Fogging F) ; Determining Fogging Characteristics (Fogging F)
• VW PV3922 ; Oil and Water Repellent Behavior
• VW PV3925 ; Polymer Materials; Measuring Formaldehyde
• VW PV3925 ; Measuring Formaldehyde Emissions
• VW PV 3925 (HPLC); Formaldehyde and Other Carbonyls with HPLC
• VW PV3927 ; Thermogravimetric analysis (TGA)
• VW PV3928 ; External Pilling (Martindale Procedure)
• VW PV3929 ; Resistance to Weathering (Dry - Hot Climate EG Kalahari Arizona South America)
• VW PV3930 ; Resistance to Weathering (Humid Hot Climate EG Florida)
• VW PV3931 ; Hardness Test (Shore L)
• VW PV3932 ; Wear resistance of flocks (VW chisel test)
• VW PV3936 ; Polymer Materials – Testing the Resistance of Blow Gases to Components
• VW PV3937 ; amine emissions from polyurethane soft foam; Indicator method
• VW PV3937 ; Amine Emission (Indicator Method)
• VW PV 3939 Para. 3.1 ; Determination of Extractable Components
• VW PV 3939 Para. 3.2 ; Visual Evaluation of Extractable Components
• VW PV3942 ; Determination of Organic Emissions
• VW PV3944 ; Amine Color Change
• VW PV3945 ; Dynamic – Mechanical Analysis
• VW PV3946 ; Seam Strength
• VW PV3949 ; Knot Test (Wear Chisel)
• VW PV3952 ; scratch resistance
• VW PV3955 ; Determining Stitch Slip Resistance
• VW PV3958 ; Determination of Water Tightness
• VW PV3959 ; Hydrolysis test on roofing with laminated interior lining
• VW PV3959 ; Hydrolyseprüfung Am Formhimmel
• VW PV3961 ; Hook – And – Loop Test
• VW PV3964 ; Cream Resistance
• VW PV3964 ; Surfaces in the Passenger Compartment – ​​Cream Strength Test
• VW PV3965 ; Visual Color Matching
• VW PV3966 ; White Cracking Properties (Ball Drop Test)
• VW PV3968 ; Contamination Behavior (Martindale Method)
• VW PV3970 ; Determination of Mold Growth Potential
• VW PV3975 ; Draft – Abrasion Resistance on High Gloss Surfaces
• VW PV3975 ; High - Scrub Resistance of Glossy Surfaces
• VW PV3976 ; Corrosion Effect on Copper
• VW PV3983 ; Stress Crack Resistance
• VW PV 5015 BR ; Hydrolysis Resistance
• VW QP R 015 ; Quality Requirements - Self-Adhesive Film
• VWTL1010 ; burning behavior
• VWTL1010 ; Vehicle Interior Materials – Combustion Behavior Material Requirements
• VW TL 203 Para. 3.4c ; File Test
• VW TL 203 Para. 3.4d ; Resistance to Temperature Cycle
• VWTL211 ; Paint on plastic exteriors
• VWTL211 ; Paint Coatings on Exterior Plastic Parts
• VWTL211 ; Paint Coatings on Exterior Plastic Parts
• VWTL226 ; material coverings for car interiors
• VWTL226 ; Paint Coating on Materials Used in Vehicle Interior Upholstery – Requirements
• VW TL 226 Para. 3.12.3.2 ; PV 3906 – Wear behavior 100 crockmeter strokes against dry fabric
• VW TL 226 Para. 3.12.3.3 ; PV 3906 – Wear behavior 100 crockmeter impact against damp fabric (water)
• VW TL 226 Para. 3.12.3.4 ; PV 3906 – Wear behavior 2000 crockmeter strokes against dry fabric
• VW TL 226 Para. 3.13.2 ; Drop Test
• VW TL 226 Para. 3.13.3 ; PV 3906 – Abrasion behavior
• VW TL 226 Para. 3.7.2 ; Cross Cut Test with Adhesive Tape Tensile (St. Andrew'S Cross)
• VWTL481 ; PVC – Foam Film
• VWTL496 ; Door and Rear Side Trim Panel Group – Material Requirements
• VW TL 496 Para. 3.14 ; Resistance to Cleaning Agents (Dyeing)
• VW TL 496 Para. 3.15 (a) ; Cleaning Behavior with Solvents
• VW TL 496 Para. 3.15(b) ; Drop Test
• VW TL 496 Para. 4.2.5 ; Behavior Towards Detergents
• VW TL 496 Para. 5.5 ; Droplet Test
• VW TL52013 ; PPE + PS-polymer mixture; material requirements
• VW TL52018 ; Adhesive Foam Tape Adhesive - Double Sided Coated - Material Requirements
• VW TL52035 ; PP / EPDM / PE polymer blend, finished parts; material requirements
• VW TL 52035 Para. 5.14 ; Resistance To Test Media
• VW TL 52035,PP/EPDM/PE ; Polymer Blend Finished Parts – Material Requirements
• VW TL52045 ; PUR – Integrated Foam for Steering Wheel Cover – Material Requirements
• VW TL 52045 – 4.4 ; Drop Test
• VW TL 52057 Para. 4.5.3 ; Separating Force
• VW TL52062 ; PA66, fiberglass reinforced, for finished parts; material requirements
• VW TL 52062,Pa 6.6 ; Glass Fiber Reinforced for Finished Parts - Material Requirements
• VW TL52064 ; Leather Material Requirements 6 Types of ACGDEF
• VW TL52094 ; Trim Panel Load Compartment – ​​Material Requirements
• VW TL52226 ; Molded Ceiling Covering Lightweight Types – Material Requirements
• VW TL52231 ; Polymer blends of ABS and PC; material requirements
• VW TL52231 ; Abs and PC Polymer Blends – Material Requirements
• VW TL52231 ; Labels – Self-Adhesive Material Requirements
• VW TL 52254 ; Laminated Knitted Sponge – Material Requirements
• VW TL52277 ; POM, pulse changed; finished parts; material requirements
• VW TL52277 ; Impact Resistant Modified Pom Parts Material Requirements
• VW TL 52283 ; polypropylene, elastomer modified, talc or mineral modified
• VW TL 52283 ; Polypropylene Elastomer – Modified Modified Talc or Mineral – Material Requirements
• VW TL 52283 ; Polypropylene Elastomer – Modified Talc or Mineral Reinforced External Components
• VW TL 52283 Para. 4.7 ; Resistance to Agents
• VW TL 52288 ; polyamide, mineral reinforced, precast; material requirements
• VW TL 52288 ; Polyamide Mineral – Reinforced Finished Parts Material Requirements
• VW TL52296 ; Board And Other Foam - Supported Components - Material Requirements
• VW TL 52296 Para. 2.1.4 ; Resistance to Agents (Drop Test)
• VW TL52306 ; Carpet – Material Requirements – Table 2 – Mat
• VW TL52311 ; ASA – Graft Polymer Finished Parts – Material Requirements
• VW TL52311 ; ASA Graft Plymer – Material Requirements
• VW TL52321 ; Wooden parts for interiors; material requirements
• VW TL52321 ; Wooden Pieces for Interior Flooring – Material Requirements
• VW TL 52323 ; Non-Woven Fabric Damping Molded - Material Requirements
• VW TL 52345 – 3 ; (Finished Parts) Epdm Body Gaskets – Quality Requirements
• VW TL 52345 – 3 ; (Material) EPDM Body Seals – Quality Requirements
• VW TL 52345 Para. 4.9.1 ; Window Glass Edge Wear
• VW TL 52350 ; Best Material for Convertible – Material Requirements
• VW TL 52382 ; PC / PBT – Blended finished parts painted material requirements
• VW TL52388 ; Polypropylene for Passenger Compartments - Material Requirements
• VW TL 52482 ; Textile Mats Material Requirements
• VW TL52428 ; Protective Decorative Film - Component Requirements
• VW TL52435 ; Krafftstoffleitung, multilayer pipe; material requirements
• VW TL52439 ; polyamide tube; material requirements
• VW TL 52440 ; PA6, glass fiber reinforced; finished parts; material requirements
• VW TL52447 ; Flocking Interior Flooring Material – Material Requirements
• VW TL 52452 ; Increased Crystallization Polypropylene – Material Requirements
• VW TL52463 ; Polypropylene Multiwall Sheet
• VW TL 52472 ; Polyolefins for Flooring
• VW TL 52472 Para. 3.5.14 ; Color Abrasion Fastness (Rotary Abrasion Test)
• VW TL 52475 ; ABS + PA6 polymer blend; material requirements
• VW TL52476 ; POM finished parts – Material requirements
• VW TL52478 ; Laminated Foam Coated Fabrics – Material Requirements
• VW TL 52499 ; Trim Panels Made of Mixed Fibers Assembled Molded Thermoplastic Material Requirements
• VW TL 52499 Para. 5.5.1 ; Color Abrasion Fastness (Rotary Abrasion Test)
• VW TL52611 ; Carpet Mats – Material Requirements
• VW TL52618 ; engine design covers; Scope of Material Data Sheets
• VW TL 52622 ; Thermoplastic Elastomers in Combination with Thermoplastic for Outdoor
• VW TL52625 ; mounting bracket; Scope of Material Data Sheets
• VW TL52625 ; Plastic Front End Carrier – Test Scope for Material Data Sheets
• VW TL 52631 ; Bumpers Bumper Covers Spoiler Sill Boards
• VW TL52635 ; polyamide pipe for diesel fuel line; material requirements
• VW TL52636 ; POM Finished Parts (Not For Passenger Compartment) Material Requirements
• VW TL52639 ; Polypropylene Reinforced Impact for Dashboard – Material Requirements
• VW TL52641 ; EPDM Body Seals – Quality Requirements
• VW TL52642 ; CFRP components; Material requirements and component requirements
• VW TL 52652 ; ASA and PC Polymer Blends – Material Requirements
• VW TL 52653 ; PUR – Flexible Foam for Vehicle Seats – Material Requirements
• VW TL52660 ; Underbody Applications Engine Capsule Stone Protection Cw Covers
• VW TL 52662 ; Needle Molded Parts – Perforated – Material Requirements
• VW TL 52673 ; ASA + PA – polymer mixture
• VW TL 52682 ; PA66, fiberglass-reinforced, cooler for leading precast; material requirements
• VW TL 52685 ; Polyether Pur Lightweight Foam for Engine Compartment Absorbers – Material Requirements
• VW TL52688 ; Polypropylene for Battery Cases – Material Requirements
• VWTL527 ; ABS graft polymer, finished parts; material requirements
• VW TL 52704 ; EPDM Body Gaskets – Material Requirements
• VW TL 52705 ; Soft-Touch Tactile Polypropylene for Vehicle Interiors - Material Requirements
• VWTL528 ; Chrome - Plated Plastic Parts - Material Requirements
• VWTL533 ; high density polyethylene; material requirements
• VWTL534 ; Polyamide 6 Finished Part – Material Requirements
• VWTL 82345 ; Gear Mechanism Assy Automatic Transmission
• VW80000, 80106 ; Environmental Simulation Temperature: (-50 to 150) ˚C, Relative Humidity: (10 to 98) %RH Ramp Rate: Maximum 10˚C/min to (-40 to 85)˚C Transfer Time: < 10 seconds Room Size : Up to 45.000 liters Solar Simulation: Solar Simulation (Metal Halide Lamp), Infrared Exposure, Surface Temperature up to 120˚C