SAE Automotive Standard Tests

EUROLAB With its expert team and state-of-the-art laboratories, it offers reliable and unbiased results in automotive tests, as in all other tests.

• SAE AMS-2700 -Humidity
• SAE AMS-STD 753 -Humidity
• SAE AMS-STD-753 -Salt Spray (Fog)
• SAE J 1742 - Connections for High-Voltage On-Board Electrical Harnesses - Test Methods and General Performance Requirements
• SAE J 1756 - Determination of Fogging Properties of Interior Automotive Materials
• SAE J 1960 - Accelerated exposure of automotive exterior materials using a controlled irradiation water-cooled Xenon arc apparatus
• SAE J 2302 - Thermal Efficiency of Coupling / Hose / Band Insulation
• SAE J 2334 -Laboratory cyclic corrosion test
• SAE J 2527 - Performance-based standard for accelerated exposure of automotive exterior materials using a controlled radiation Xenon-arc apparatus
• SAE J 2635 - Threadlike corrosion test procedure for painted aluminum wheels and painted aluminum wheel trim
• Test and Test Procedures for SAE J 343 -SAE 100R Series Hydraulic Hoses and Trousers
• SAE J 365 - Method for Testing the Friction Resistance of Trim Materials
• SAE J 684 -Surface vehicle standard; Tests for balls and trailer couplings
• SAE J1113-1 - Electromagnetic Compatibility Measurements procedures and limits for vehicle co
• SAE J1113-11 -Immune to Transient Transients Conducted on Power Cables
• SAE J1113-12 - Electrical Interference from Transmission and Coupling ? Capacitive and Inductive Coupling on Lines Except for Supply Lines
• SAE J1113-13 - Electromagnetic Compatibility Measurement Procedure for Vehicle Components? Chapter 13: Immunity to Electrostatic Discharge
• SAE J1113-2 -Electromagnetic Compatibility Measurement Procedures and Limits for Vehicle Components (Excluding Aircraft)-Conducted Immunity, 15 Hz - 250 kHz-All Leads
• SAE J1113-21 - Electromagnetic Compatibility Measurement Procedure for Vehicle Components? Chapter 21: Immunity to Electromagnetic Fields, 30 MHz - 18 GHz, Absorber Striped Chamber
• SAE J1113-22 - Electromagnetic Compatibility Measurements Procedure for Vehicle Components ? episode 22? Immunity to Radiated Magnetic Fields
• SAE J1113-23 - Electromagnetic Compatibility Measurement Procedure for vehicle components ? Immunity to Radiated Electromagnetic Fields, 10 kHz - 200 MHz, Strip Line Method
• SAE J1113-24 - Immunity to Radiated Electromagnetic Fields; 10 kHz - 200 MHz ? Crawford TEM Cell and 10 kHz to 5 GHz? Broadband TEM Cell
• SAE J1113-26 - Electromagnetic Compatibility Measurement Procedure for Vehicle Components? Immunity to AC Power Line Electric Fields
• SAE J1113-3 - Conducted Immunity, 250 kHz - 400 MHz, Direct Injection of Radio Frequency (RF) Power
• SAE J1113-4 -Immunity Against Radiated Electromagnetic Fields Bulk Current Injection (BCI) Method
• SAE J1113-41 - Limits and Measurement Methods of Radio Distortion Characteristics of Components and Modules for the Protection of Aircraft Receivers
• SAE J1113-42 -Electromagnetic Compatibility Component Test Procedure Part 42 Conducted Transient Emissions
• SAE J1127 - Low voltage battery cable
• SAE J1128 - Low voltage primary cable
• SAE J1211 - Recommended Environmental Practices for Electronic Equipment Design
• SAE J1237 -Hardness
• SAE J1326 - Measurement of Wet Color Transfer Properties
• SAE J1351 -Odor
• SAE J1352 - Compression and Recovery of Insulation Fills
• SAE J1355 - Test Method for Measuring the Thickness of Flexible Insulation Fillers
• SAE J1389 - Corrosion Test for Insulation Materials(STABILIZED August 2011)
• SAE J1402 -Automotive Air Brake Hose and Hose Groups
• SAE J1455 - Common SAE/TMC Recommended Environmental Practices for Electronic Equipment Design (Heavy Duty Trucks)
• SAE J1523 - Metal-to-Metal Shear Strength Test for Automotive Type Adhesives
• SAE J1525 - Lap Shear Test for Automotive Type Adhesives for Fiber Reinforced Plastic (Frp) Bonding
• SAE J1530 -Abrasion (Taber, Schopper and Wyzenbeek)
• SAE J1530-A - Fiber Loss Resistance Erichsen Scratch Resistance
• SAE J1530-A (Taber Abrasion Only) -Scratch/ Scratch/ Scuffing/ Smearing/ Mar Resistance Scratch Resistance (Five Fingers) Fiber Loss Resistance Erichsen Scratch
• SAE J1531 scratch resistance
• SAE J1531-A - Fiber Loss Resistance Erichsen Scratch Resistance
• SAE J1545 - Instrumental Color Difference Measurement for Exterior Cladding, Textiles and Colored Flooring
• SAE J1545- J1717 (Annex E) -Color Measurements Instrumental, sphere
• SAE J1553 - Cross Peel Test for Automotive Type Adhesives for Fiber Reinforced Plastic (Frp) Bonding
• SAE J1600 (4/87) - Evaluation of Adhesion Properties of Automotive Sealants (Cancelled January 2001)
• SAE J1625 -Heavy Duty Circuit Breakers
• SAE J1639 - Test Methods for Nylon Materials
• SAE J1679 -Adhesion/Cohesion and Peel Strength
• SAE J17 -Latex Foam Rubbers
• SAE J1717 - Interior Automotive Plastic Part Test(NOT PASSED November 2007)
• SAE J1717 (Appendix E) -Brightness/Turbidity Measurements
• SAE J1717-D1 Pendulum Strike
• SAE J1752-3 - Measurement of Radiated Emissions from Integrated Circuits – TEM / Broadband TEM (GTEM) Cell Method; TEM Cell (150 kHz - 1 GHz), Broadband TEM Cell (150 kHz - 8 GHz)
• SAE J1756 -Fogging
• SAE J1756-A -Fogging
• SAE J1756-B -Fogging
• SAE J1757-A -Fogging
• SAE J1757-B -Fogging
• SAE J1767 - Instrumental Color Difference Measurements for Color Fastness of Automotive Interior Upholstery Materials
• SAE J1769 -SAE Fact Sheet - Protocol for the Long-Term Evaluation of Permeability - Barrier Strength in Non-Metallic Fuel Tanks
• SAE J1798 - Rating of Electric Vehicle Battery Modules
• SAE J1847 -Wear Resistance Test-Vehicle Exterior Graphics and Pin Lines
• SAE J1885 - Accelerated Exposure of Automotive Interior Trim Components Using a Controlled Radiation Water-Cooled Xenon-Arc Apparatus
• SAE J1885 (3/05) -Accelerated Exposure of Automotive Interior Trim Components Using a Controlled Radiation Water-Cooled Xenon-Arc Apparatus (Canceled Jan 2008, Replaced By J2412_201508)
• SAE J1885 (Inactive 2008) - Accelerated Exposure of Automotive Interior Trim Components Using Controlled Radiation Water Cooling
• SAE J1885-05 -Accelerated Exposure of Automotive Interior Trim Components
• SAE J1885-Indoor (replaced Jan 2008) -Color Fastness -Xenon Arc
• SAE J1907 - Glass-to-Elastomeric Peel Adhesion Test for Automotive Glass Encapsulation
• SAE J1960 - Accelerated Exposure of Automotive Exterior Materials Using a Controlled Radiation Water-Cooled Xenon-Arc Apparatus
• SAE J1960 ( 10/04 - Accelerated Exposure of Automotive Exterior Materials Using a Controlled Radiation Water Cooled Xenon Arc Apparatus (Cancelled Jan 2008, Replaces J2527)
• SAE J1960 (Inactive 2008) -Xenon Arc Time-Lapse Exposure (External)
• SAE J1960-04 - Accelerated Exposure of Automotive Exterior Materials Using a Controlled Radiation Water-Cooled Xenon-Arc Apparatus
• SAE J1961 - Accelerated Exposure of Automotive Exterior Materials Using Solar Reflector Apparatus
• SAE J1976 - Outdoor Decomposition of Outdoor Materials
• SAE J2016 (11/99) - Chemical Stress Resistance of Polymers (Cancelled in February 2008, Replaced by ISO 11403-3)
• SAE J2020 - Accelerated Exposure of Automotive Exterior Materials Using Fluorescent UV and Condensation Apparatus
• SAE J2027 - Standard for Protective Caps for Gasoline Fuel Line Pipes, Chemical Resistance (Xenon-Arc)
• SAE J2044 - Quick Connect Coupling Specification for Fuel Oil and Vapor/Emission Systems
• SAE J2045 (Chapter 4.5) -Internal Fuel Resistor
• SAE J2045 (Chapter 4.6) -Internal Fuel Resistor
• SAE J2045 (Chapter 7.8) -Resistance to auto-oxidized fuel
• SAE J2060 (Chapter 7.8) -Resistance to auto-oxidized fuel
• SAE J2060 (Chapter 7.9) -Resistance to auto-oxidized fuel
• SAE J2100 -Temperature and Humidity Temperature Range; (-100 to 180) °C, Humidity Range ; 5 to 100% RH, (5-90%RH ; ±1.0%RH, 90-100%RH ; ±1.7%RH 15 to 50°C)
• SAE J2114 -Wear resistance (Taber)
• SAE J2215 -Adhesion/Cohesion and Peel Strength
• SAE J2236 - Determination of Continuous Upper Temperature Resistance of Elastomers
• SAE J2253 - Test Procedures for Automotive Structural Composite Materials (Formerly ACCM-T-02)
• SAE J2260 (Section 7.6) -Fuel Exposure preconditioning
• SAE J2260 (Chapter 7.7) -Methanol Resistance
• SAE J2260 (Section 7.8) -Fuel Exposure preconditioning
• SAE J2260 (Chapter 7.9) -Methanol Resistance
• SAE J2288 - Life Cycle Test of Electric Vehicle Modules
• SAE J2334 - Copper Accelerated Acetic Acid Salt Spray (CASS) Test Cyclic Corrosion Test
• SAE J2412 - Accelerated Exposure of Automotive Interior Trim Components Using a Controlled Radiation Xenon-Arc Apparatus
• SAE J2412- J2527- J1885 (Inactive) -Abrasion (Artificial) Artificial Weathering (Xenon Arc)
• SAE J2412-Indoor -Color Fastness -Xenon Arc
• SAE J2464 -Passive Dissipation Resistance, Short Circuit, Overcharge, Overdischarge, Disconnector Shutdown Integrity
• SAE J2501 -Round, Shielded and Unshielded, 60 V and 600 V Multicore Sheathed cables
• SAE J2527 - Accelerated Exp
• SAE J2544 -Plug-In Relay Test Methods
• SAE J2635 -Filiform Corrosion
• SAE J2863 -Automotive Trailer Towing Coupling
• SAE J2962-1 -Communications Transceivers Qualification Requirements – LIN
• SAE J2962-2 -Communications Transceivers Qualification Requirements – CAN
• SAE J315 -Fiberboard Test Procedure
• SAE J322 -Non-Metallic Trim Materials–Test Method for Determining Dyeing Resistance to Hydrogen Sulfide Gas
• SAE J323 -Determination of Cold Cracking of Flexible Plastic Materials (Method A)
• SAE J323 (Method A) -Cold Cracking
• SAE J365 - Method for testing the scratch resistance of flooring materials
• SAE J365- SAE J861 - Cracking
• SAE J365- SAE J948 (Taber only) -Wear
• SAE J369 -Flammability
• SAE J400 - Chip Resistance of Surface Coatings
• SAE J406 -Methods for Determining the Hardenability of Steels
• SAE J417 -Hardness
• SAE J423 - Methods of Measuring Depth of Case
• SAE J560 - Primary and Auxiliary Seven-conductor Electrical Connector for Truck-Trailer Connector Cable
• SAE J575 - Lighting Devices and Components for Use in Vehicles Smaller than 2032 mm
• SAE J576 - Test Methods and Equipment for Lighting Devices Used in Vehicles with a Total Height of Less than 2032 mm Plastics for Use in Optical Components such as Lenses and Reflectors of Motor Vehicle Lighting Devices
• SAE J578 -Color Specification
• SAE J855 - Textile and Plastic Stretching and Set
• SAE J860 -Measuring Mass (Weight) of Organic Trim Materials
• SAE J861 -Color Transfer
• SAE J882 - Measuring the Thickness of Automotive Textiles and Plastics
• SAE J883 - Determination of Dimensional Stability of Automotive Textile Materials
• SAE J911 -Surface Texture, Roughness (Ra), Peak Number (Pc) and Average Profile Spacing, (Rsm) Metallic Coated and Uncoated Steel Sheer/Strip Measurement to be Formed and/or Painted
• SAE J912 - Determination of Blocking Resistance and Associated Properties of Automotive Trim Materials
• SAE J913 - Roving Automotive Fabrics and Fibrous Materials
• SAE J948 - Determining the Resistance of Automotive Bodycloth, Vinyl, and Leather to Abrasion and Attachment of Automotive Bodycloth
• SAE J948- J1530- J1847 - Wear Resistance Taber
• SAE J949 - Determination of Hardness of Interior Flooring Materials and Surfaces by Three-Point Bending Test
• SAE J965 -Abrasion
• SAE USCAR 15 - Specification for Testing Automotive Miniature Bulb Socket/Wingplate Assemblies
• SAE USCAR 2 - Performance Specification for Automotive Electrical Connector Systems
• Field Associated Life Test Addendum to SAE USCAR 20 -SAE /USCAR-2
• SAE USCAR 21 - Performance Specification for Wire-to-Terminal Electrical Crimps
• SAE USCAR 24 -Helium Leak Detection
• SAE USCAR 24 (Chapter 5.2.3.8) - Live Dissection
• SAE USCAR 24 (Section 5.2.4.8.5) -Salt Mist-Salt Spray
• SAE USCAR 24 (Section 5.2.4.8.6) - Drop Test
• SAE USCAR 24, Sec. 5.2.3.4 -Electrical Resistance (1 milliohm to-megaohm)
• SAE USCAR 3 - Standard for Testing Automotive Miniature Bulbs
• High Voltage Connector Performance Supplement to SAE USCAR -37 -SAE/USCAR-2
• SAE USCAR-1 -Salt spray test and evaluation of fastener finishes
• SAE USCAR-15 -Specification for Testing Automotive Miniature Bulb Socket/Circuit Plate Assemblies
• SAE USCAR-15-3 - Specification for Testing Automotive Bulb Sockets
• SAE USCAR-17-5 - Performance Specification for Automotive RF Connector Systems
• SAE USCAR-2 - Automotive Electrical Connection Systems Standard
• SAE USCAR-2 Rev. 6 - Performance specification for automotive electrical connector systems
• SAE USCAR-21 -Rev. 3
• SAE USCAR-21-3 - Performance specification for wire-to-terminal electrical crimps
• SAE USCAR-23-1 -Road vehicles – 60 V and 600 V solid wires – Dimensions, test methods and requirements
• SAE USCAR-25-3 - Ergonomics Specification for Electrical Connections
• SAE USCAR-2-6 - Performance Specification for Automotive Electrical Connector Systems
• High Voltage Connector Performance Supplement to SAE USCAR-37 -SAE/USCAR-2
• SAE USCAR-38 - Performance Specification for Ultrasonically Welded Wire / Cable Termination
• SAE USCAR-38-1 - Performance Specification for ultrasonically welded wire terminations