PR Standards Tests

EUROLAB With its expert team and state-of-the-art laboratories, it offers reliable and unbiased results in automotive tests, as in all other tests.

Automakers have merged in the past, so there are many cases where these features are widely used by every automaker. In addition, LV 112 and LV 214 standards for electrical connectors are being developed with the joint participation of automobile manufacturers such as Audi, BMW, Daimler, Porsche and Volkswagen.

Therefore, Daimler, Benz, Chrysler, Volkswagen, Renault, Nissan etc. Please check the standard number regardless of the name of the finished vehicle manufacturer, such as Among these features, the name of the finished vehicle does not matter.

PR Standards

• PR 231 (2.2.16); coefficient of friction
• PR 231 (2.2.17); Scraping After Icing
• PR 231, 2.2.3; Size Requirements
• PR/TS (2.5.8); Protective Hood, Tailgate and Side Seals, Shell Features
• PR/TS (4.4.5); Tensile Test of Rood Window Guide Profile
• PR/TS 231 (2.2.7.1); Prolongation in Delivery
• PR/TS 231 (2.3.1) ; Visual Requirement - Adhesive Tape
• PR/TS 231 (2.3.1) ; Visual Requirement - Bond Between Adhesive Tape and Gasket
• PR/TS 231 (2.3.4) ; Testing Adhesive Strength
• PR/TS 231 (2.3.5) ; Static Testing in Extreme Climate Conditions
• PR/TS 231 (2.5.10.1/4.22.1); Pulling Force - Hand-Fit: Temperature Change
• PR/TS 231 (2.5.10/4.2.2.1); Pulling Force - Hand Attached: Pulling Force
• PR/TS 231 (2.5.5) ; Adhesion Affects Sealing
• PR/TS 231 (4.2.1); Snap-on Force EdgeGuard/Door Sealing
• PR/TS 231 (4.2.2); Edge Protection/Door Sealing Pull Force
• PR/TS 231 (4.3.1) ; Door Gasket Compression @ 200 mm
• PR/TS 231 (4.3.2); Adhesive Strength Between Adhesive Strip and Door Frame
• PR/TS 231 (4.3.3); Tensile Force for Clipped Gasket Rubber and Rubber-Like Materials
• PR/TS 231 (4.4.1); Immersion Force Window Guide Roof Area
• PR/TS 231 (4.4.2); Window's Displacement Force
• PR/TS 231 (4.4.3); “Y” Direction Profile Counterforce for Lip Seals (Window Guide Profile)
• PR/TS 231 (4.5.1); Compression Test of 200mm long Common Lip Seal
• PR/TS 231 (4.6.1); Lip Counterforce Outer and Inner Waist Belt
• PR/TS 231 (4.6.2); Displacement Force for Outer and Inner Waist Belt
• PR/TS 231 (4.6.3); Inner and Outer Waist Belt Pull Test from Body
• PR/TS 231 (4.7.1); Shrinkage Test Over 1000mm for Bonded Door Gaskets Edge Guards and Joint Seals
• PR/TS 231 (4.7.2); Loss of Adjustment or Remaining Deformation of Additional Gasket Outer and Inner Waist Belt, Door Seal and Edge Protection
• PR/TS 231 (4.7.2), PR303.4 Part B ; Loss of Adjustment and Reset Force and Edge Protection of Grouting Door Gasket
• PR/TS 231 2.2.12.5 ; Resistance to Chemicals-Drop Test
• PR/TS 231 2.2.6.1 ; Flexural Strain Flock Coating
• PR/TS 231 Section 2.2.13.4; Kalahari Mode
• PR/TS 231 Section 2.2.13.5 ; Florida Mode
• PR/TS 231 Section.4.1.2 ; Radiation/Bending Characteristics of Lips, Joints and Hose Seals
• PR/TS 231, 2.2.6.3 (Methods A and B); Bonded Oil Adhesion
• PR/TS-231, 2.2.12.4; Glass Cleaner Resistance to Media
• PR/TS-231, 2.2.13.2; Low Temperature Storage
• PR/TS-231, 2.2.8; Cold Bending Test
• PR/TS-231. 2.2.13.1 ; High Temperature Storage