Test Standards for Auto Parts

EUROLAB With its expert team and state-of-the-art laboratories, it offers reliable and unbiased results in automotive parts tests, as in all other tests.

We offer test support for each test standard below;

• AATCC Test for presence of leachable nickel; Detection Leachable Nickel
• AATCCTM107; Color fastness Water
• AATCCTM 111A; Weather Resistance Textiles Sunlight Arc Lamp Exposure Wetting
• AATCCTM 118; Oil Repellency Hydrocarbon Resistance Test
• AATCCTM 15 ; Color fastness Perspiration
• AATCC TM 16(Options 1 and 2) ; Color fastness Light
• AATCC TM 173 (Procedures 1, 2 and 9); Cmc Calculation Small Color Differences Acceptability
• AATCCTM 23 ; Colorfastness Burnt Gas Fumes
• AATCCTM 30(II, III); Antifungal Activity, Evaluation of Textile Materials Mold Resistant Textile Materials
• AATCCTM8; color fastness
• AWR3211; Implementation Directive No. 3211 Labs from 2004
• MBN LV 123 ; Electrical Properties Electrical Safety High Voltage Components Road Vehicles-Requirement Tests
• MBN LV-124 ; Electrical Electronic Components Motor Vehicles Up to 3,5T-General Requirements, Test Conditions Tests
• MBN LV-148 ; Electrical Electronic Components Vehicle 48V-Vehicle Electrical System Requirement Tests
• PV 867-10 ; Specification DVD – Hardness Test Annex-3 Pv 867-10 2004
• BMW AUTOMOTIVE3.2.4.2 ; Pile Yarn Thickness
• BMW PR 303 ; 4 (Additional Mats)
• BMW 3.2.10 ; Imprint Behavior No Foam Print Depth @ 60 Minutes 24 Hours (Din 54316/En20 105 A02)
• BMW 3.2.10.2 ; Impression Depth Tested at 60 Degrees C in 60 Hours at 24 Minutes
• BMW 3.2.10.3 ; Wet Tested After 50 Minutes Soak, Impression Depth At 60 Minutes 24 Hours
• BMW 3.2.7 ; Number Tufts
• BMW 3.3.1 ; Loss of Wear Resistance Weight Change Color (Din 53 109 En 20 105 A02)
• BMW 3.3.2 ; Color Fastness Light (1 Cycle Blue Wool, 2 Cycles Gray Scale) (Iso 105 B06)
• BMW 3.3.3 ; Crushing Color Fastness (Wet & Dry) (Iso 105 X12)
• BMW 3.3.4 ; Surface Strength (Din 345 T6)
• BMW 3.3.5 ; Rot Resistance (Vda 270)
• BMW 3.3.6; Odor Test (Vda 270)
• BMW 3.3.8 ; Accelerated Contamination After Vacuum Cleaning (Pr121.2)
• BMW 3.5.1 ; Total Thickness (Iso 1765)
• BMW 3.5.2 ; Total Weight (Iso 8543)
• BMW 3.5.3 ; Tensile Strength (Iso 13 934 T1)..3.5.4 Elongation
• BMW 3.5.6 ; Dimensional Stability (Iso 13 934 T1)
• BMW 6951 ; 680.6 Dimensional Stability
• BMW 6951 680.6 ; dimensional stability
• BMW AA-0026 ; Aging Resistance Test
• BMW AA-0053 ; Resistance Sunscreen Painted Surfaces
• BMW AA-0180 ; Cross Scan Test
• BMW AA-0203 ; Hydrolysis Test
• BMW AA-0213 ; Condensation Water Constant
• BMW AA-P 308 ; Hydrolysis Test
• BMW AUTOMOTIVE 3.2.4.3 ; stack weight
• BMW GS90010 ; Types Surface Protection Metal
• BMW GS 90011 ; Organic Coating Pieces Made of Metal
• BMW GS 95003-4 ; Environmental Test
• BMW GS 95003-5 ; chemical resistance
• BMW GS 95024-2-1. ; Electrical Electronic Components Motor Vehicles. Electrical Requirements Tests
• BMW GS 97019 E ; Coat Standard
• BMW GS 97028-3 ; Structural Adhesive
• BMW GS 97034-1; Manual Wear Test
• BMW GS 97034-2 ; Finger Nail Test
• BMW GS 97034-3 ; Shoe Sole Test
• BMW GS 97038 ; burning behavior
• BMW GS 97045-1 ; Painted Plastic Parts Interior & Exterior
• BMW GS 97045-2 ; Painted Plastic Parts Interior & Exterior
• BMW PR 303 ; Climate Change Tester Parts
• BMW 3.2.10 ; Imprint Behavior Print Depth Without Foam, 60 Minutes 24 Hours [Din 54316 / En20 105 A02]
• BMW 3.2.10.22 ; Impression Depth Tested at 60 Degrees C in 60 Hours at 24 Minutes
• BMW 3.2.10.33 ; Wet Tested After 50 Minutes Soak, Impression Depth At 60 Minutes 24 Hours
• BMW 3.2.4.2 ; Pile Yarn Thickness
• BMW 3.2.4.3 ; stack weight
• BMW 3.2.7 ; Number Tufts
• BMW 3.3.1 ; Loss of Wear Resistance Weight Change Color [Din 53 109 & En 20 105 A02]
• BMW 3.3.2 ; Colorfastness Light [1 Cycle Blue Wool
• BMW 3.3.3 ; Color Fastness Refractory [Wet Dry] [Iso 105 X12]
• BMW 3.3.4 ; Surface Resistance [Din 345 T6]
• BMW 3.3.5 ; Corrosion Resistance [Vda 270]
• BMW 3.3.6; Odor Test [Vda 270]
• BMW 3.3.8 ; Accelerated Contamination After Vacuum Cleaning [Pr121.2]
• BMW 3.5.1 ; Total Thickness [Iso 1765]
• BMW 3.5.2 ; Total Weight [Iso 8543]
• BMW 3.5.3 ; Tensile Strength [Iso 13 934 T1] Bmw 3.5.4 Elongation
• BMW 3.5.6 ; Dimensional Stability [Iso 13 934 T1]
• BMW AA 0129 ; Cass Test
• BMW AA P 194 ; Resistance Test
• BMW AA-0224 ; Cyclic Corrosion Test
• BMW AA-P 098 ; Peel Strength Adhesive Tapes 2007
• BMW AA-P 177 ; Cross Scan Test
• BMW AA-P 187 ; Multi-Stone Sawdust Test Salt Water Exposure
• BMW AA-P 192 ; Determination of Multiple Stone Chip Strength
• BMW AA-P 193 ; Single Impact Test
• BMW AA-P 194 ; chemical resistance
• BMW AA-P 224 ; Condensate Water Constant Atmosphere Test
• BMW AA-P 225 ; Cass
• BMW AA-P 288 ; Accelerated Weathering Color Stability
• BMW BMW TP 303.5 ; Alternative Climate Test Trim Parts
• BMW BMW_PR 303.5c ; Alternative Climate Test
• BMW GS 93008-4 ; Limits Components Their Emissions Materials Components, Limit Values ​​for Components Their Emissions Materials Components 2002
• BMW GS 93010-2 ; Elastomers (Test Methods Tolerances Material Properties), Elastomers (Test Procedures Tolerances Material Properties) 2007
• BMW GS 93010-3 ; Elastomers (Material Properties, Key Usage, Test Environment), Elastomer (Material Properties, Application Keys, Test Environment) 2007
• BMW GS 93011-3 ; Elastomers - Identification, Identification of Extractable Components by Extraction Cyclohexane / Acetone Elastomers - Identification, Identification of Extractable Components by Extraction Extraction Using Cyclohexane / Acetone 2002
• BMW GS 93011-4 ; Elastomers - Identification, Determination Thermal Degradation Behavior by Thermogravimetry (Tg) Elastomers - Identification, Thermal Degradation Behavior Using Thermogravimetry (Tg) 2003
• BMW GS 93011-5 ; Elastomers - Identification, Cold Guide Value Determination by Differential Scanning Calorimetry (Dsc) Elastomers - Identification, Low Temperature Standard Value by Differential Scanning Calorimetry (Dsc) 2003
• BMW GS 93011-6 ; Elastomers - Identification, Infrared Spectroscopic Analysis (Ir), Pyrolysis-Ir Elastomers - Identification, Analysis by Infrared Spectroscopy (Ir), Pyrolysis Ir 2002
• BMW GS 93011-7 ; Elastomers – Property Determination Methods Coloring Determination Organic Materials With Elastomers (Lac Indifference) Elastomers – Determination Properties, Methods Test Determination Color Change Elastomer Due to Organic Material (Paint Indifference) 2002
• BMW GS 93011-8 ; Elastomers – Property Determination, Determination of Stress Cracking Resistance Plastics Elastomers by Contact Elastomers – Detection Properties, Determination of Resistance Stress Cracking Plastics Due to Contact Elastomer 2002
• BMW GS 93011-9 ; Elastomers - Characteristics Determination, Temperature Influence, Bending Stress Cold Elastomers - Determination Properties, Temperature Influence, Low-Temperature Bending Test 2002
• BMW GS 93012-1 ; Elastomers, Heat Aging Elastomer Heat Aging 2008
• BMW GS 95011-4 ; Printed Circuit Boards Motor Vehicles , Betauungsprüfung Printed Circuit Boards (Pcbs) Motor Vehicles, Dew Test 2004
• BMW GS 97014-1 ; Emission Measurement Extraction Chambers, Determination of Volatile Organic Emissions from Fuel – Kraftstoffdampführenden Components Emission Measurement Extraction Chambers, Determination of Volatile, Organic Emissions from Fuel Carrying or Fuel Vapor Components 2000
• BMW GS 97014-2 ; Emissions Measurement Discharge Chambers, Determination of Volatile Organic Emissions from Non-Krafstoffbeaufschlagten Components, Semi-Finished Products Material Samples Emission Measurement Nozzle Chambers, Organic Emissions From Components, Semi-Finished Parts Material Samples No Fuel 2000
• BMW GS 97014-3 ; Measurement of Volatile Emissions Under Air Exchange A Test Chamber, Determination of Volatile Organic Emissions from Components, Semi-Finished Materials Emission Measurement Under Air Exchange A Test Chamber, Determination of Organic Emissions from Components, Semi-Finished Products Materials 2002
• BMW GS 97017 ; Galvanized Plastic Parts, Electroplated Plastic Parts 2008
• BMW GS 97034-1 ; Surface Inspection Automotive Interior Materials, Manual Abrasion Test Surface Test Motor Vehicle Interior Material, Manual Abrasion Test 2007
• BMW GS 97034-2 ; Surface Inspection Automotive Interior Materials, Nail Test Surface Test Motor Vehicle Interior, Nail Test 2007
• BMW GS 97034-3 ; Surface Inspection Automotive Interior Materials, Shoe Sole Test Surface Test Motor Vehicle Interior Materials, Shoe Sole Test 2007
• BMW GS 97034-4 ; Surface Inspection Automotive Interior Materials, Paint Friction Behavior Surface Test Motor Vehicle Interior, Color Wear Behavior 2007
• BMW GS 97034-5 ; Surface Control Automotive Interior Materials, Detergent Resistance Surface Test Motor Vehicle Interior Materials, Resistance Cleaning Agents 2007
• BMW GS 97034-6 ; Surface Inspection Automotive Interior Materials, Contamination Cleanability Surface Test Motor Vehicle Interior Materials, Contamination Behavior Cleaning Ability 2007
• BMW GS 97034-7 ; Surface Inspection Automotive Interior Materials, Drop Test Surface Test Motor Vehicle Interior Materials, Drop Test 2007
• BMW GS 97034-8 ; Surface Inspection Automotive Interior Materials, Marking Slope Determination Surface Testing Motor Vehicle Interior Materials, Scratch Slope Determination 2008
• BMW GS 97034-9 ; Surface Inspection Automotive Interior Materials, Scratch Test Surface Test Motor Vehicle Interior, Scratch Test 2008
• BMW GS 97038 ; Finishing Combustion Behavior Materials Used Automobile Interior Trim Detection Combustion Behavior Automotive Interior Trim Materials 2006
• BMW ISO 2409 ; Cross Cut Test
• BMW LH 6 955 885.6 ; Drawing Resistance, P. 29 2000
• BMW MBN LV 123 ; Electrical Properties Electrical Safety High Voltage Components Road Vehicles-Requirement Tests
• BMW MBN LV-124 ; Electrical Electronic Components Motor Vehicles Up to 3,5T-General Requirements, Test Conditions Tests
• BMW MBN LV-148 ; Electrical Electronic Components Vehicle 48V-Vehicle Electrical System Requirement Tests
• BMW N600 45.0 ; Self Adhesive Label Information 1995
• BMW N 601 21.0 ; Finishing Combustion Behavior Materials Used Automobile Interior Trim Detection Combustion Behavior Automotive Interior Trim Materials 1994
• BMW PA-P 028; Cross Scan Test
• BMW PA-P 100 ; Determining the Reflectometer Value (Glossy)
• BMW PDT NVB 10 021Rev G ; Copolymer Polyacetal Medium Viscosity 2005
• BMW PR 102.3 ; Shape Sky Bezel Console 1998
• BMW PR 203 ; Pr Window Lift Window Regulator Test Specification 2004
• BMW PR 231 ; Pr Door Sealing System Tp Door Sealing System 2008
• BMW PR 303 ; 44 [Additional Mats] Bmw Environmental
• BMW PR 303.4 ; Climate Change Tester Parts 1998
• BMW PR 306.4 ; Solar Simulation Equipment Parts 2001
• BMW PR 307.4 ; Evaluation of Scratch Susceptibility of Component Surfaces 2001
• BMW PR 308.1 ; Climatic Test Adhesive Bonds Trim Parts 2000
• BMW PR 308.2 ; Climatic Test Connected Joints
• BMW PR 380 2.2.5 ; Adhesion Force
• BMW PR 380 2.3.1 ; Penetration Force After Din En 388
• BMW PR 380 2.3.2; Tension Test Religion En 29073-3
• BMW PR 380 2.3.4.2 ; Separation Force Tests Din 54 310
• BMW PR 380 2.3.4.3 ; Separation Force Between Back Cover Pad After Din 54 310
• BMW PR 380 2.3.4.4 ; Adhesive Adhesion Test Bmw Bmw Pr 308
• BMW PR 380 2.3.5 ; Adhesive Strong Mop Flooring
• BMW PR 380 2.3.6 ; Intermediate Test Bmw Bmw Pr 384
• BMW PR 380 2.4.1.1 ; Shear Force at Room Temperature Fsx
• BMW PR 380 2.4.1.2 ; Shear Force Fsx at 70°C / 70% RH
• BMW PR 380 2.4.1.3 ; Shear Force Fsx Test at -30°C
• BMW PR 380 2.4.2 ; Tear Force From Floor Tile Velcro Plate X Direction
• BMW PR 380 2.4.3 ; Flooring Tear Force from Z Direction Velcro Plate
• BMW PR 380 2.4.4 ; Extreme Torque Velcro Plate Swivel Joint
• BMW PR 380 2.4.5 ; Holding Force Detection System Z Direction Fhz
• BMW PR 380 2.4.6 ; Service Life Test Detection System (Shear Load, Removal)
• BMW PRV 306.3; Sun simulation 1992
• BMW PRV 307.3 ; Injection Molded Parts, Injection Molded Parts 0
• BMW QV 34081-2008 ; Geometric Brakes
• BMW QV 52009 ; Quality Specification - Pur Foam Soft Part Seats, Backrests Headrests 2005
• BMW S 601 57.0 ; Plastic Components Without Surface Treatment Trim Area 1996
• BMW TL6 979 450.6 ; PVC Artificial Leather 8 PVC Artificial Leather 8 2008
• BMW TL 7 055 896.6; Pur Sandwich Pur Sandwich 2004
• BMW TP 303.4 ; Climate Testing in Plastic Textile Components 1998
• BMW TP 303.5 ; Alternative Climate Test Trim Parts
• BMW TP309 ; Vibration Tester Components
• BMW TS 326.4 ; Ts Door Edge Panel, Side Edge Panel 2004
• BMW VDA 270; Smell Test
• Chrysler 463-11-01C; Soğuk Çatlama463Lb-11-0C
• Chrysler 463-11-01C; Soğuk Çatlama463Lb-11-0C
• Chrysler 463LB-11-0 1B ; flexibility
• Chrysler 463LB-11-01B ; Leather (Physical Test) – Resistance Cold Cracking General Trim Materials
• Chrysler 463LB-11-01C; Cold Cracking
• Chrysler 463LB-12-01; Humidity/Hot/Cold Cycling
• Chrysler 463LB-12-01; Humidity/Hot/Cold Cycling
• Chrysler 463LB-13-01; thermal aging
• Chrysler 49-00023 ; Performance Requirements Paint Coating Systems
• Chrysler AS-10169 ; Surface Appearance Requirements Fascias and Exterior Components
• CS-11982; Electrical/Electronic Environmental Features
• DC-10611 Rev. A ; E/E Component Environmental Test Specifications
• DC-10867; Throttle Body – Electronically Controlled
• LP-463KB-21-01; Resistance Bearing and Amp Fuzzing
• LP-463KB-21-01; Resistance Bearing and Softening
• LP-463LB-10-01; Bond Strength Genuine, Heat Aged, Post Cycling
• LP-463LB-10-01; Bond Strength Genuine, Heat Aged, Post Cycling
• LP-12491; Wax Whitening Resistance
• LP-461A-241; Leakage Test Anodized Aluminum
• LP-463AB-37-01 ; Flocked Rubber Adhesion
• LP-463AB-54-01 ; Shear Strength
• LP-463CB-01-02 ; Adhesives (Physical Test) Shear Strength Solvent Release Pressure Sensitive Adhesives – Initial Aging
• LP-463CB-08-01 ; Tensile – Shear Adhesion Structural Adhesives – Determination (Adhesives – Physical Test)
• LP-463CB-10-01 ; Heat, Humidity, Cold Aging Test Adhesives
• LP-463CB-10-01A ; Adhesives (Physical Test) – Heat Moisture Cold Aging Test Adhesives
• LP-463DB-12-01; Fogging Resistance Ingredient – ​​Determination
• LP-463DD-04-01 ; Volatile Loss Thermoplastics
• LP-463DD-06-01 ; Testing Plasticizer Migration from Paint Surfaces to Plastic Parts
• LP-463DD-07-01 ; Plastics (Physical Chemical Tests) – Cold Tests Plastic Materials
• LP-463DD-08-02 ; Plastics (Physical Chemical Tests) – Accelerated Service Temperature Tests (Hot and Cold Cycle) Plastic Materials Parts
• LP-463DD-18-01 ; Scratch Mar Resistivity Determination Automotive Plastics
• LP-463DD-8-02 ; Accelerated Service Temperature Tests
• LP-463KB-02-01; Fracture Strength Elongation Test Soft Trim Materials
• LP-463KB-03-01 ; Tear Strength Soft Upholstery Materials
• LP-463KB-06-01; Wear Resistant Soft Trim Materials
• LP-463KB-07-01 ; Fadeometer Test – Automotive Interior Materials That Sae J-1885 Replaces
• LP-463KB-12-01; Fabrics (Physical Test) – Weatherometer Test Automotive Type Trim Materials
• LP-463KB-14-01; Spring Skew Measurements
• LP-463KB-21-01; Wear Resistance Trim Materials – Taber Method
• LP-463KB-22-01; Fabrics (Physical Test) – Tuft Lock Test Tufted Carpets
• LP-463KB-22-01; pinch lock
• LP-463KB-24-01 ; Stability Skin Wrinkle
• LP-463KB-25-01; Fabric (Physical Test) – Relative Stiffness Flexural Automotive Trim Materials Various Fibrous Materials
• LP-463KB-34-01 ; Antimicrobial Milk Test
• LP-463KB-37-01; Fabrics (Physical Test) – Pilling Resistance Minking Textile Fabrics
• LP-463KB-37-02; Chrysler Stain Removal Test
• LP-463KC-01-01; Resistant Paint Transfer (Watercolor Test)
• LP-463KC-01-01B; Resist Dye Transfer
• LP-463KC-01-01B; Resist Dye Transfer
• LP-463KC-019; Resistor Contamination
• LP-463KC-019; Resistor Contamination
• LP-463KC-03-01; Water Stain Resistance Soft Upholstery Materials
• LP-463KC-03-01B; water spot
• LP-463KC-04-01; Cleanability Interior Trim
• LP-463KC-04-01-2A; painting
• LP-463KC-04-01-2B; Grease Cleanability
• LP-463-KC-04-01A; Cleanability Soil Strength
• LP-463-KC-04-01A; Cleanability Soil Strength
• LP-463KC-04-02; Dirty Interior Flooring
• LP-463KC-04-02; Contamination Test 4.3.2 Method 2 Hexapod
• LP-463KC-09-01; Odor Test Method
• LP-463LB-07-01; Leather (Physical Test) – Determination of Bulk Thickness Soft Upholstery Materials
• LP-463LB-09-01; Leather Vinyls (Physical Test) – Flexible Fold Test Leather, Vinyl Coated Fabrics, Other Upholstery Materials
• LP-463LB-10-01; Bond Strength Trim Materials
• LP-463LB-11-01; Leather (Physical Test) – Resistance Cold Cracking General Trim Materials
• LP-463LB-12-01; Resistance Humidity Hot Cold Bicycle Trim Materials Test
• LP-463LB-12-01B; Resistance Humidity [Hot Cold Cycles]
• LP-463LB-13-01; Resistance Heat Aging
• LP-463LB-19-01; Top Coat Adhesion Coated Trim Materials
• LP-463NA-01-01; Sealants (Chemical Analysis) – Non-Volatile Material Sealants –
• LP-463NB-13-01; Sealants (Physical Test) – Cold Bond Sealants –
• LP-463NB-14-01 ; Sealants – Painting Paint with Sealant – Detection (Physical Test)
• LP-463NB-15-01 ; Sealers – Specific Gravity Per Gallon Sealer (Physical Test)
• LP-463NB-19-01 ; Sealant – Waterproofing Properties – Determination (Physical Test)
• LP-463PB; painting
• LP-463PB-06-01; Acid Spot Test (Replaced by Chrysler Lp-463Pb-31-01)
• LP-463PB-07-01; Solvent Wipe Resistance Test (Replaced by Chrysler Lp-463Pb-31-01)
• LP-463PB-08-01; Water Stained Soap Stain Test (Replaced by Chrysler Lp-463Pb-31-01)
• LP-463PB-11-01; Measurement Specular Reflection (Replaced by Astm D523)
• LP-463PB-15-01; Adhesion Toughness (Replaced by Astm – D3359) Methods A and B
• LP-463PB-22-01; Cycle Test Painted Surfaces
• LP-463PB-31-01; Resistant Paint Films Various Liquids
• LP-463PB-36-01; Color Temperature Stability
• LP-463PB-43-01; Paint – Mar Strength Test
• LP-463PB-52-01; Chipped Corrosion Test
• LP-463PB-54-01; Crock Mar Resistance
• LP-463PB-57-02; Determination of Asphalt Painting Exterior Plastics
• LP-463PB-57-03; Determination of Automotive Fluids Dyeing Plastics
• LP-463TB-01-01 ; Solvent Resistance Top Coating Bonded Film
• LP-463TB-03-01 ; Tape Films (Physical Test) – Peel Strength Adhesion – Detection
• LP-463TB-09-01 ; Cold Impact Tests - Glued Molds, Cast Ornaments, Appliques (Physical Test)
• LP-463TB-10-01 ; Shrinkage – Pressure Sensitive Tape Films – Determination
• LP-463TB-11-01 ; Adhesive Molds Die Cast Ornaments – Determination (Physical Test)
• LP-463TB-12-01 ; Bonded Dies Vinyl Extrusions (Physical Test) – Shrinkage –
• LP-463TB-13-01 ; Fluid Immersion Test – Tapes, Films, Bonded Molds, Die Cast Ornamental Samples
• LP-463TB-14-01 ; Adhesive Tapes or Films with Softening Points (Physical Test)
• LP-46FB-37-03; Chrysler Chrysler Kickout Test
• LP-46FB-37-03; repellency test
• MS JAB 2000 (SAE J1351) ; Wet/Dry Smell
• MS JAB 2000 ; [Sae J1351] Wet / Dry Smell
• MSJB 2000 ; [Astm D2261] Tear Strength
• MS JB 2000(ASTM D2261); tear strength
• MSJB2000 ; Ms-Jp-1-3 Salt Solution
• MSJB2000 ; Salt Solution Ms-Jp-1-3
• MS JB2000 (SAE J883) ; shrinkage
• MS-JB 2000 ; Fracture Strength [Astm D5034]
• MS-JB 2000 (ASTM D5034); Chrysler Breakpower
• MS-JP9-4; Flammability Test Ingredient
• MS-JP9-8; Chemical and Abrasion Resistant Plastics, Outdoor Applications
• PF-7051; Continuous Paint Performance – Ppap & Pso
• PS-10378; Corrosion Resistant Coating – Rich Zinc/Aluminum Rich Silver or Black Multi-Coating System – Chromium Free
• PS-1129; Chemical Surface Treatment – ​​Black Carbon Steel, Stainless Steel, Nickel Plated Steel Part
• DBL 5306; Supply Specification Interior Hardware Materials Similar Products
• DBL 5307; Flame Retardant Properties / Interior Trim Parts
• DBL 5404 ; Requirements Parts Made of Thermoplastic Direct Indirect Areas Passenger Compartment
• DBL 5416 ; Thermoplastic Coating Parts, Enclosures Functional Parts External Applications
• DBL 5452; Foam Molded Flexible Cellular Polyurethane Based Materials
• DBL 5455; Supply Specification Polyolefin Foam
• DBL 5471; Upholstery and Molded Filled Parts Vehicle Interiors (Composite Parts)
• DBL 5555 ; Supply Specification Finished Parts Semi-Finished Products Made from Organic Polymer Materials
• DBL 5768 ; Supply Specification Compression, Molded Fibrous Materials
• DBL 5869 ; Supply Specification Nonwoven Fleece
• DBL 6714 ; Dangerous Goods Regulation
• DBL 7340 ; Supply Specification Paints Containing Zinc Powder
• DBL 7381; Coating Major Passenger Car Components/ Body Panels Other Functional Parts High Abrasive Stress
• DBL 7384; Supply Specification Coating Plastic Parts Vehicle Interiors
• DBL 7391; Coating / Painting Parts High Abrasive Stress
• DBL 7392; Coating/Painting Parts Subject Moderate Exposure Corrosion Stress
• DBL 7398 ; Heat Resistant Paint
• DBL 7399 ; General Conditions Tests Enamels, Paints Similar Coatings Related Coatings
• DBL 8451; Electrodeposited Zinc or Zinc Alloy Plating Components Made of Ferrous Materials
• DBL 8585 ; Environmental Protection, Hazardous Substances, Hazardous Substances Negative Substance List
• MBN LV 123 ; Electrical Properties Electrical Safety High Voltage Components Road Vehicles-Requirement Tests
• MBN LV-124 ; Electrical Electronic Components Motor Vehicles Up to 3,5T-General Requirements, Test Conditions Tests
• MBN LV-148 ; Electrical Electronic Components Vehicle 48V-Vehicle Electrical System Requirement Tests
• DIN 50018 ; Testing for the Presence of a Saturated Atmosphere Sulfur Dioxide
• DIN 53 121 ; bending stiffness
• DIN 53-109 ; Wear Resistance W / Measurement Color Change
• DIN 53377 ; dimensional stability
• DIN 53420 ; Testing Cellular Materials Apparent Density
• DIN 53452 ; Testing Plastics Bending Test
• DIN 53453 ; Testing Plastics Impact Bending Test
• DIN 53455 ; Plastic Tensile Test
• DIN 53457 ; Determining Elastic Modulus by Tensile
• DIN 53479 (Method A) ; Intensity
• DIN 53504 ; Testing Rubber - Determination of Tensile Strength at Break, Tensile Stress at Yield, Elongation at Break A Tensile Test
• DIN 53505 ; Testing Rubber – Shore A Shore D Hardness Test
• DIN 53507 ; Testing Rubber Elastomers - Determining Tear Strength Elastomers
• DIN 53517 ; Determination Compression Set After Constant Tension
• DIN 53571 ; Zugoersuch German Language – Testing Flexible Cellular Materials Tensile Strength Test Determination Tensile Strength Elongation at Break
• DIN 53577 ; Determination of Compressive Stress Value Compressive Stress-Strain Characteristics Flexible Cellular Materials
• DIN 53584 ; Determination of Carbon Black Testing for Sulfur Content
• DIN 53855 ; Determination of Thickness Textile Fabrics
• DIN 53855-3 ; Total Thickness Including Filament Binding
• DIN 53857 ; German Test Textiles Simple Tensile Test On Strips Textile Fabrics Woven Fabrics Strips
• DIN 54001 ; Color Fastness Test Textile Preparation Usage Grayscale Evaluation Change Color
• DIN 54316 ; Stigma Behavior / Visibility Impression
• DIN 54318 ; dimensional stability
• DIN 54325 ; Pile Yarn Thickness
• DIN 54345; Ti Surface Resistance
• DIN 72552 ; Terminal Designations Motor Vehicles
• DIN 75201 ; Determining Windshield Fogging Characteristics Trim Materials Motor Vehicles
• DIN 75201A ; Fogging Features
• DIN 75-202 ; Color fastness Light
• DIN EN 12127; Total Weight Including Filament Tie
• DIN EN 150 105-B06; Color fastness Light
• DIN EN 20105-A02 ; Change Color Before Aging To Grayscale
• DIN EN 20105-A02 / PR 121.1 ; Dirt Sensitivity / Visual Evaluation
• DIN EN 20105-A02/PR 121.1 ; Dirt Sensitivity/Visual Evaluation
• DIN EN 29073-1; Primary Support Polar
• DIN EN 388; Puncture resistance
• DIN EN 53855-3; Total Thickness Including All Layers
• DIN EN 60; Glass Reinforced Plastics – Ignition Loss Detections
• DIN EN ISO 105X12;
• DIN EN ISO 13 934-1; breaking force
• DIN EN12127; Total Weight Per Unit
• DIN EN29073 ; Unit Area Weight
• DIN EN53855-3; Total Thickness Including All Layers
• DIN IEC 60038 ; IEC Standard Voltages
• FLTM BN 108 ;
• FLTM BN 113-01 ; Cyclic Bond Strength
• FLTM BO 131-01 ; Odor Evaluation[ Sae J1351]
• FLTM BP 101-01 ; Procedure Ozone Resistance
• FMVSS 302; Automotive Flammability (Single Combustion)
• FTMS 406-1031; Flexural Properties Plastics
• FTMS 406-1071; Izod Impact Resistance
• FTMS 406-1081; Rockwell Indent Hardness Test
• FTMS 406-1082; Non-Rigid Plastics with Indentation Hardness Via a Durometer
• FTMS 406-1083; Indent Hardness Rigid Plastics Via a Durometer
• FTMS 406-1091; Abrasion Wear (is Lost Weight)
• FTMS 406-1101 ; Deformation Under Load
• FTMS 406-1121; Tear Resistant Film Coating
• FTMS 406-2011 ; Deviation Temperature Under Load
• FTMS 406-2031 ; Linear Thermal Expansion (Fused-Quartz Tube Method)
• FTMS 406-2032 ; Thermal Expansion Test (Strip Method)
• FTMS 406-2051 ; Brittleness Temperature by Impact Plastics
• FTMS 406-5011 ; Specific Gravity by Displacement Water
• FTMS 406-5012 ; Specific Gravity from Weight Volume Measurements
• FTMS 406-6011 ; Expedited Service Tests (Extreme Temperature Humidity)
• FTMS 406-6022; Accelerated Weathering Test Unfiltered Carbon Arc (Alternative Navy Test)
• FTMS 406-6023; Accelerated Weathering Test Wetting, Freezing, Drying, Ultraviolet Cycle (Alternative Navy Test)
• FTMS 406-6041; delamination
• FTMS 406-6051; distortion
• FTMS 406-6052; Internal Tension Plastic Sheets
• FTMS 406-6081; Volatile Loss
• FTMS 406-6091; Mold Resistant Plastics, Mixed Culture Method, Agar Medium
• FTMS 406-7011 ; Resistant Plastics Chemical Reagents
• FTMS 406-7031; Water Absorbent Plastics
• FTMS 406-7032 ; Water Vapor Permeability
• FTMS 406-7041; Drying Test (For Weight Loss)
• FTMS 601-11221; Hard Rubber, Impact Resistance, Console
• FTMS 601-11231; Impact Resistance, Hard Rubber, Simple Beam
• FTMS 601-11251; Impact Resistance, Hard Rubber, Fixed Size Ball
• FTMS 601-11261; Impact Resistance, Battery Containers
• FTMS 601-11311 ; Softening Point, Hard Rubber
• FTMS 601-12131; Compression Set, Cellular Rubber
• FTMS 601-12151; Compression Deviation, Cellular Rubber
• FTMS 601-12211 ; Air Temperature Test, Cellular Rubber
• FTMS 601-12311; Oil Immersion Test, Cellular Rubber
• FTMS 601-12411; Water Absorption, Cellular Rubber
• FTMS 601-13011 ; Tensile Strength, Friction Band
• FTMS 601-13031 ; Extension, Insulation Tape
• FTMS 601-3021A ; Hardness, Durometer
• FTMS 601-3311 ; compression set
• FTMS 601-3321; Compression Recovery
• FTMS 601-3331; Compressibility Recovery, Gasket Materials
• FTMS 601-4111; Tensile strength
• FTMS 601-4121; Elongation, Final
• FTMS 601-4131; tensile stress
• FTMS 601-4211 ; Tear Resistance, Crescent Angle
• FTMS 601-5321; Brittleness, Low Temperature, Solenoid Actuated Apparatus
• FTMS 601-5411 ; Compression Set, Low Temperature
• FTMS 601-5511 ; Hardness, Durometer, Low Temperature
• FTMS 601-5611 ; Rigidity, Torsion, Low Temperature
• FTMS 601-6111; Tensile Strength Elongation Immediately After Immersion Fluids
• FTMS 601-6121; Tensile Elongation, Liquid Immersion, Post Healing
• FTMS 601-6211 ; Change Volume, Liquid Immersion
• FTMS 601-6231; Change Thickness Immediately After Immersion Fluid
• FTMS 601-6251; Weight Shifting, Liquid Immersion
• FTMS 601-6631 ; Change Weight, Submersion
• FTMS 601-7221; Air Heat Test, Air Heating Environment
• FTMS 601-7231; Air Heat Test, Liquid Heating Environment
• FTMS 601-7241; Test Tube Heat Aging Test
• FTMS 601-7311; Resistance Light
• FTMS 601-8211; Adhesion, Coating Fabric
• FTMS 601-8311; Adhesion, Seams (Seam Strength)
• Fiat 07740 ; Procedure Competence Components/Modules New Product 2004
• Fiat 08094 ; Procedure Execution Management Aesthetic Sensory Reference Standards 2004
• Fiat 50180 ; Corrosion Tests 2004
• Fiat 50184 ; Requirements for Nonmetals Environmental Tests (for Paintsamels etc.) 1997
• Fiat 50451 ; Accelerated Weathering Test (Weather-Ometer) 1989
• Fiat 50451/01 ; Accelerated Aging Sunlight 2002
• Fiat 50457 ; Tests of Non-Metallic Materials, Specular Gloss Finishing Paints, Varnishes Enamels 1990 By Glossmeter
• Fiat 50461 ; Adhesion Test Squaring Inorganic Organic Trims 2005
• Fiat 50471/01 ; Alternative Ultraviolet Radiation/Moisture Resistance Test 2000
• Fiat 7.D3160 ; Rearview Mirrors Environmental Life Tests 2003
• Fiat 7-M0001 ; Evaluation Colored Injection Molded Thermoplastic Material 2004
• Fiat 7-M0002 ; Evaluation Glossy Plastic Material 2004
• Fiat 7-M0003 ; Evaluation Embossing Plastic Material 2004
• Fiat 7-M0005 ; Molded Plastic Trim Components, Scratch Resistance 2005
• Fiat 9.03117/01- 2003 ; Pressure Sensitive Adhesive Stickers Interior
• Fiat 9.03117/01-1993 ; Pressure Sensitive Adhesive Stickers Interior
• Fiat 9.03178/01 ; Driver Passenger Airbag Module (Front) 2001
• Fiat 9.55842/01 ; Aesthetic Operational Finishing Pieces Made of Plastic Materials Obtained by Painting or Other Processes 2005
• Fiat ES30376272A ; Trw Automotive Gmbh Development Provision Trw Automotive Gmbh Engineering Specification 2006
• BI 103-01; Salt Spray Resistance Test Painted Panel Parts
• BI 104-01; Water Immersion Test Painted Parts and Panel
• BI 104-02; Condensing Water Vapor Test
• BI 106-01; Coating Adhesion Test
• BI 106-03 ; Hydrolysis Resistance Painted Plastic Panels
• BI 107-05 ; Thermal Shock Test Coating Adhesion
• BI 109-01 ; Coloring Matching Artificial Light
• BI 113-02 ; Resistance Acid Staining
• BI 117-01 ; Thickness Measured Paint Films
• BI 123-01; PPGI Corrosion Test
• BI 123-03; Component Corrosion Test
• BI 161-01; Determination of Mar Resistance Automotive Coatings
• BI 168-01 ; Fluid Resistance Chassis and Exterior Materials Incidental Exposure
• BJ 107-03 ; Moisture Test Rust Prevention Compounds
• BO 116-01 ; Resistance Internal Weathering
• BO 116-03 ; Interior Trim – Fogging Features
• BO 131-03 ; Internal Odor Test
• BO 160-04 ; Resistant Plastic Painted Parts High Pressure Cleaning Operations
• BQ 007-02 ; Acid Dissolution Test Decorative Aluminum Parts
• BQ 104-07 ; Environmental Test Cycles
• BV 101-07 ; Tensile Strength Test Lap-Shear Bonds
• BZ 156-01 ; Determination of Formaldehyde, Aldehyde, Ketone Emissions
• BZ 157-01 ; Determination of Organic Emissions from Non-Metallic Materials
• CETP 00.00-L-467 ; Accelerated Cyclic Corrosion Test
• DVM-0006-EX ; Outdoor Lighting Dvm Sunload Warpage 2003
• DVM-0024-MA; Sunload 2003
• E-60 ; Waterford Plant Standard Test Method – Lap Shear Strength 1999
• ESA-M2P109-A2 ; Paint Quality, Color Transparent Coating, Exterior Parts 2003
• ESB-M4D500-A ; Polypropylene (Pp) Copolymer, Medium Impact, Color Pigmented, Low Gloss, Indoor 1993
• ESB-M70J5-A ; Thermoset Polyester
• ESE-M99P21-A ; Anti-Rust Coatings
• ESF-M4D9-A; Acrylic Resin Esf-M4D9 1979
• FLTM BN 113-01C; Cyclic Bond Strength
• FLTM BN 113-01 O ; Original Bond Strength
• FLTM BN 113-01 S ; Steam Adhesion Strength
• FLTM BN 113-01W ; Wet Bond Strength
• FLTM BN-105; weight
• FLTM BN-105-01; Colour
• FLTM BN-105-03 ; Colour
• FLTM BN-106-01; Colour
• FLTM BN107-01 ; Colour
• FLTM BN-112-08 ; Colour
• FLTM BO 131-01 / SAE J1351 ; Odor Evaluation
• FLTM BP 101-01, ; Procedure A Ozone Resistance
• FLTM-BI 104-02; Moisture Resistance 0
• FLTM-BI 107-05; Thermal Shock Test Paint Adhesion 2001
• FLTM-BI 124-01; Thread Corrosion Test 2005
• FLTM-BI 157-06; High Performance Stone Chip Resistance Test New Rating Scale 2001
• FLTM-BI 161-01; Determination of Mar Resistance Automotive Coatings 2001
• FLTM-BN 102-04; Flexible Folding Test 2001
• FLTM-BN 103-01; Resistance Coated Fabrics Plastic Film Migration Stain Prevention 2001
• FLTM-BN 107-01; Cracking Test 2001
• FLTM-BN 108-02; Wear Resistance - Taber Abrasive 2001
• FLTM-BN 108-13; Scratching Resistance 2001
• FLTM-BO 101-01 ; Resistance Artificial Weathering 2001
• FLTM-BO 101-05 ; Termination Fuel Resistance Plastic Parts 2001
• FLTM-BO 111-02 ; Test Indent Recovery 1991
• FLTM-BO 113-03 ; Load Deflection Test 2001
• FLTM-BO 113-04 ; Rolling Sphere Fatigue Test Arm Rest Other Complex Trim Groups 2001
• FLTM-BO 115-01 ; Plastics – Resistant to Artificial Weathering 0
• FLTM-BO 116-01 ; Exposure Interior Flooring Materials Controlled Radiation Water Cooled Xenon Arc Apparatus 2005
• FLTM-BO 131-01 ; Identify Evaluate Fragrances Decorative Materials / Components / Interior Elements 2000
• FLTM-BO 151-01 ; Resistor Low Temperature Effect 2001
• FLTM-BO 155-01 ; Plastic Tapes Resist Protective Waxes Dewaxing Material 2001
• FLTM-BP 101-01; Rubber – Degradation by Ozone 2001
• FLTM-BP 106-03 ; Low Temperature Brittle Rubber Rubber-Like Material 2001
• FLTM-BP 108-06 ; Compression Kit Coolant Hoses 2001
• FLTM-BP 153-01; Painting Surfaces with Polymer Elastomer 2001
• FLTM-BQ 104-07 ; Environmental Test Cycles 2000
• FLTM-BU 151-01 ; Finishing Floor Adhesive Strength 2000
• FLTM-EU-BN-001-01 ; Fade Resistance Materials 2001
• MA-0005 ; Resistance Fade
• MA-0015 ; Chemical Compatibility
• MA-0024 ; Cold Impact-Internal Components Rigid Dashboards
• MA-0124; Resistance External Weathering – Accelerated
• MA-0128 ; Simulated Sunload Resistor – Exterior
• MA-0130 ; Moisture Aging
• MA-0131; Exposure to Heat Age – External
• P-54B; Waterford Plant Standard Test Method – Viscosity – One Pack Rtv Base 1998
• S95UW-19B591-AA ; Spec – Hos Asy A/C (Air Conditioning Hose Group) 2003
• WSB-M1P83-B1-4; Chromium Specification
• WSD-M2D381-A2 ; Thermoplastic Elastomer (Tpe), Polyolefin, Epdm Rubber Modified, Moderate Heat Resistant, Flame Retardant, 82 Durometer A Hardness 2001
• WSD-M96D14-A3 ; Hose, Epdm Rubber – Rayon Or Polyester Reinforced Coolant Resistant Low Compression Kit 2006
• WSD-M9P8-A ; Rubber Parts, Internal External Performance 1999
• WSF-M11P8-A2 ; Adhesion Requirements, Pressure Sensitive Adhesive, Sponge Rubber, High Tack 1992
• WSH-M96D25-A2 ; Hose, A/C Refrigerant (Nylon Barrier) Medium Pressure Resistant 2000
• WSK M20416-A ; Polyurethane (Pur) Foam, Molded High Elasticity 1994
• WSK M4D670-A ; Polypropylene (Pp) Copolymer. Medium High Impact Molding Compound 1989
• WSK M4D686-A ; Polypropylene (Pp), Homopolymer Molding Compound 2000
• WSK M4D745-A ; Abs Mold Component, High Temperature Resistant High Impact Strength, Indoor 2006
• WSK M4D752-A ; Polyamide (Pa) 66, Heat Stabilized, Coolant Resistant, 30% Glass Fiber Reinforced Molding Material 1990
• WSK M98P9-A ; Finished Parts, Plastics, Non-Decorative 1993
• WSS M21P17 ; Anti-Corrosion Coating, Electrolytic Zinc Plate, Trivalent Chrome, Leakproof Sealing.
• WSS M2P180-A ; Paint Performance, Hard Surfaces, Exterior 2003
• WSS M2P188-A1 ; Paint Performance, Plastic Surfaces, Interior 2006
• WSS M4D941-A1 ; Polypropylene (Pp) Homopolymer, 30% Glass Fiber/Mica Reinforced Molding Compound, Lubricated Heat Stabilized 25% Minimum Recycled Content 1998
• WSS M80J6-A ; Clear Topcoat, Uv Curable, Abrasion Resistant, Clear Plastic S. 0
• WSS M99P32-A ; Performance, Acoustic Thermal Assemblies 2000
• WSS-M11P65-A2 ; Tape, Performance, Pressure Sensitive Adhesive, Double Sided, Exterior, Body Side Molding
• WSS-M15P4-E ; Interior Trim, Installation Performance Specification
• WSS-M21P17-B1 – B5 ; Corrosion Protective Coating
• WSS-M21P36-A4 – A6 ; Ball Stud Protective Coating
• WSS-M21P37-A1 – A2 ; Corrosion Protective Coating
• WSS-M21P39-A1 – A4 ; Corrosion Protective Coating
• WSS-M2P122-C1 – C6 ; Wear
• WSS-M2P170-B1 – B7 ; Heat Resistant Coating
• WSS-M2P177-B1 – B2 ; Paint Performance
• WSS-M2P177-C1 – C3 ; Paint Performance
• WSS-M2P178-A – A3 ; Paint Performance
• WSS-M2P180-A ; Paint Performance, Hard Surfaces, Exterior
• WSS-M2P188-A1 ; Resistance Fade
• WSS-M2P190-A ; Resistance Artificial Weathering
• WSS-M2P190-A1 ; Paint Performance, Visible Metallic Interior Parts
• WSS-M5P8-B1 – B2 ; Lighting Metallization, Plastic and Metal Surfaces
• WSS-M98P13-C; Exterior Plastic Performance, Mold in Color
• WSS-M99D63-A3 ; Thermoplastic Elastomer, Floor Covering, Grain Shaped
• WSS-M99P32-C ; Performance, Acoustic Thermal Assemblies
• GM 7457; Automotive Battery
• GM258M ; Weight Loss Insulation
• GM 2715M ; Abrasion Resistance [&Lt 5.000 RPM W / Weight Lo
• GM 2715M ; Wear Resistance (<5.000 Cycles W/ Weight Low
• GM 2724M (Paragraph 3.14); Fiber Coating – Indoor or Outdoor
• GM 273M ; Anti-Corrosion Coated Brake Rotors
• GM3028 ; Wear Resistance (3 Samples)
• GM 3601M ; Adhesion Requirements Bonded Exterior Flooring
• GM 3602M ; Adhesion Conditions Bonded Interior Assemblies
• GM 3604M ; Adhesion Requirements External Trim Attached Pressure Sensitive Adhesive Tape
• GM 3608M ; Adhesion Requirements Indoor Carpets
• GM 4298P ; Salt Spray Test
• GM 4350M ; Painted Part Performance Requirement
• GM 4351M (TYPE A) ; Indoor Applications Gm4351M (Type 8) Outdoor Applications 1988
• GM 4357P ; Spot Test Abrasion Sensitivity Stainless Steel
• GM4435; Protective Coating – Phosphate Type
• GM 4465P ; Water Mist Humidity Test
• GM 4466P ; Water Immersion Test - Replaced By Astm D870
• GM 4476P ; Cass Test Copper – Accelerated Acetic Acid Salt Spray Test (Fog)
• GM 4486P ; Test Ozone Resistance Elastomer Compounds
• GM 4489P ; Paint Appearance Adhesion-Planned Erase Assessment to January 2000. Do Not Use in New Applications.
• GM6090M ; Flammability Materials
• GM7400M; Plastic Parts
• GM 7451M ; Internal Part Performance Requirements Simple, Molded Colored Plastic Components
• GM 7452M ; Performance Requirements Exterior Plastic Parts
• GM 7457; Automotive Battery
• GM 9010P ; Test Solid Content Adhesives
• GM 9011P ; Cold Shock Resistance Sealants , Extinguishers Vinyl Films Test
• GM 9027P ; Test Painting Properties Adhesives Sealants
• GM 9032P ; Test for Determination of Impact Resistant Plastics
• GM 9033P ; Color Fastness (Friction)
• GM 9053P ; Hardness Test Hardness Number Conversions
• GM 9059P ; Testing Thermal Oxidative Stability Properties Plastics
• GM 9069P ; Test Resistance Hydrogen Sulfide Dyeing
• GM 9070P ; Flammability Materials Testing Procedure
• GM 9070P ; flammability Aging
• GM 9071P ; Tape Adhesion Test Paint Coatings
• GM 9077P ; Glass Content Glass Reinforced Plastics
• GM 9082P ; Test Wear Resistance Plastics
• GM 9094P ; Method for Determining Melting Point Semi-crystalline Polymers by Differential Scanning Calorimetry
• GM 9101P ; Paint Film Difference Image Evaluation Test
• GM 9102P ; Corrosion Recovery Test Method
• GM 9125P ; Procedures Laboratory Accelerated Exposure Automotive Supplies
• GM 9126P ; Cleanability Aging
• GM 9127P ; Resistance Tassel Removal or Loop Pull Floor Coverings
• GM9128P ; Mold Growth
• GM 9129P ; Seam Strength Automotive Materials
• GM 9130P ; Test Resistance Odor Textiles
• GM 9131P ; Color Changes Due to Temperature or Humidity
• GM 9132P ; Resistance Raveling Woven Textile
• GM 9133P ; Resistant Water Spotting, Finish Discoloration, Salt Staining Discoloration
• GM 9140P ; Resistance Cold Cracking Leather Plastic Rolled Products
• GM 9141P ; For Plastic Roll Leather White Vinyl White Leather
• GM9142P ; Grain Retention Interior Flooring Materials
• GM 91433 ; P Resistance Water Spotting Salt Spotting
• GM 91433P ; Resistant Water Spotting Salt Spotting
• GM9143P ; Crazy Vinyl Flooring Supplies
• GM9146P ; Wicking Bubble Convertible Top Roofing Materials
• GM 9149P ; Stitching Tear Resistance Vinyl Coated Genuine Leather
• GM 9150P ; Resistance Breakdown or Friction
• GM 9151P ; Flexibility Plastic Material
• GM 9160P ; Topcoat Adhesion Vinyls
• GM 9172P ; Sunlight Exposure Test
• GM 9193P ; Fiberglass Bond Strength Determination Procedure
• GM 9194P ; Binder Content Fiberglass Surfaces
• GM9198P ; Migratory Oils or Dyes
• GM 9200P ; Accelerated Aging Steaming
• GM 9202P ; Determination of Heat Generation Insulation Material
• GM 9206P ; Coefficients Friction Soft Trim Material
• GM 9207P ; Fixing Strength Hook Loop Tapes
• GM 9210P ; Adhesion Fiber Coating
• GM 9214P ; Testing Painting Trim Materials
• GM 9215P ; Test Mold Resistance Paper Wood Products
• GM 9216P ; Coating Adhesion Vinyl Coated Materials
• GM 9222P ; Wear Resistance Coated Genuine Leather
• GM 9231P ; Hydrolytic Stability
• GM 9240P ; Sweating Resistance
• GM 9300P ; Impact Test Plastic Materials (With or Without Tools)
• GM 9301P ; Test Intrinsic Melt Viscosity Thermoplastic Resins
• GM 9302P ; Test Stress Mark Sensitivity Plastic Materials
• GM 9303P ; Mold Resistance – Pink Stain Test
• GM 9304P ; Wear Resistance – Rca Abrasion Tester
• GM 9305P ; Criteria for Determining Acceptable/Unacceptable Materials
• GM 9306P ; Ash Content Plastic Materials
• GM 9307P ; Aging Test Vinyl Compounds and/or Parts
• GM 9308P ; Chemical Stress Resistance Plastics
• GM 9310P ; Variable Surface Temperature Heat Exposure Test
• GM 9317P ; Water Repellency Test
• GM 9327P ; Outdoor Weather Resistance Integrated Colored Plastics
• GM 9328P ; Mold Resistance – Mixed Culture Method
• GM 9329P ; High Temperature Humidity Aging
• GM 9337P ; Test Method Determine Fiber Weight Loss Wear in Carpet
• GM 9450P ; Test Procedure for Determining Water Permeability
• GM9451P ; Test Procedure Determine Warping
• GM9452P ; Test Dimensional Stability
• GM9454P; Percent Asphalt Saturation Roof Insulation Felt
• GM 9500P ; Petrol Puddle Test Petrol Filling Areas
• GM 9501P ; Petrol Immersion Test Painted Parts
• GM 9502P ; Knife Cross Scan Adhesion Test
• GM 9503P ; Evaluation of Fragility of Painted Plastic Mastics by Mandrel
• GM 9504P ; Oven Aging Test Procedure Painted Plastic Surfaces
• GM 9505P ; Automotive Environmental Cycles
• GM 9506P ; Dime Scrape Test Determines Paint Adhesion Fragility
• GM 9507P ; Thumbnail Hardness Test Painted Parts
• GM 9508P ; Chip Resistance Coating
• GM 9509P ; Solvent Friction Method Determination of Curing on Painted Metal or Plastic Surfaces
• GM 9511P ; Scab Corrosion Creepback Paint Systems on Metal Surfaces
• GM 9514P ; Recommended Practice Hot Water Immersion Test
• GM 9515P ; Abrasion Resistance Organic Coatings (Taber Abraser Method)
• GM 9516P ; Abrasion Resistance – Canvas Belt Abrasion Tester
• GM 9517P ; Perspiration Resistance Synthetic
• GM 9518P ; Determination of Paint Thickness Painted Flexible Plastic Parts
• GM 9525P ; Thermal Shock Test Paint Adhesion
• GM 9528P ; Impact Test Exterior Body Side Moldings
• GM 9531P ; Water Jet Test
• GM 9540P ; Accelerated Corrosion Test
• GM 9542P ; Wear Resistant Hot Flakes and Related Products by the Falling Sand Method
• GM9675P ; Dynamic Flexible Fatigue Test
• GM9689P ; Asphalt Painting Test
• GM 9736P ; Sulfur Dioxide Spot Test
• GM9740P ; Acrylonitrile, Styrene Butadiene Compositions Abs Polymers
• GM9758P ; Adhesion Resistance Exterior Trims
• GM9771P ; Fiber Degradation
• GM9774P ; Molding Emblem Adhesion Test Tear Resistance
• GM 9795P ; Adhesion Strength Bonded Weatherstrip – Pressure Sensitive Adhesive
• GM 9797P ; Cleavage Peel Test
• GM9838P ; Tape Lamination Automotive Components
• GM 9902P ; Non-contact Dyeing Measurement Elastomers
• GM 9904P ; Multi-Axis Impact Test
• GM Physical Certification; battery
• GME 3191 ; General Features Electrical/Electronics
• GME 60-276; Odor Analysis
• GME 60400 ; Wear resistance
• GMN 10033 ; Sunscreen Lotion Resistant Inner Coatings
• GMN 10046 ; Insulation – Thermal and/or Acoustic – Pressure Sensitive Adhesive, Aluminum, Fiber Composite – Exterior
• GMN 10059 ; Cleaning Solvent Resistance Weathering Strips During Normal Customer Use
• GMN 10083 ; Interior Paint Durability (Plastic Surfaces)
• GMN 3943 ; Scratch Mar Resistant Plastics, Five Arms Test
• GMN 6753 ; Tensile Properties Injection Molded Short Glass – Fiber Reinforced Thermoplastics Use Finite Element Analysis Long Flow Length Parts
• GMN 8170 ; Resistance Blocking
• GMW 3026 3.2.7 ; Loop Pile Pulling 5D
• GMW 3026 3.2.8 ; Wear Resistance 5D
• GMW 3026 3.3.6 ; Water Staining/Color Fastness Water 8D
• GMW 14011 ; Lens Subsystem/Component Squeak Rattle Test
• GMW 14069 ; Migration – Bleeding Resistance Contact Stain Compatibility Pvc Other Materials
• GMW 14093 ; Determination of Impact Strength Plastic Components
• GMW 14124 ; M Cycle Environmental Shrinkage
• GMW14126 ; Resistance Cold Crack Folded Materials
• GMW14127 ; Impact Cold Crack
• GMW 14130 ; Resistance Breakdown or Friction
• GMW 14131 ; Compatibility Interior Upholstery Materials Amines
• GMW 14132 ; Resistor Blocking replaces Gmn8170
• GMW 14162 ; Color Fastness Artificial Weathering
• GMW 14162(Method D) ; Color Fastness Artificial Weathering
• GMW 14171 ; Heavy Layer Sound Barriers Decoupler Assemblies
• GMW 14296 ; Sweating Resistance
• GMW 14333 ; Resistor Fuels Exterior Automotive Materials Components
• GMW 14334 ; Chemical Resistant Liquids
• GMW 14445 ; Sunscreen Insect Repellent Resistance
• GMW 14665 ; Anodized Oxidation Coating on Aluminum
• GMW 14668 ; Immersion Corrosion Metals
• GMW 14669 ; Organic Coating/Finish Performance Outdoor Indoor Metallic Materials
• GMW 14671 ; Organic Coating Performance Underbody Components
• GMW 14698 ; Scratch Resistant Organic Coatings Self Adhesive Foils
• GMW 14700 ; Stone Impact Resistance Coatings
• GMW 14729 ; Procedures High Humidity Test
• GMW 14829 ; Tape Adhesion Test Paint Coatings
• GMW 14872 ; Cyclic Corrosion Test
• GMW 14885 ; Painted Aluminum Road Casters
• GMW 14914 ; Test Fluids Fuel Resistance Test
• GMW 15272 ; Corrosion Performance Specification
• GMW 15282 ; Corrosion/Undercut Scribe Creepback
• GMW 15356 ; Sheet Metal Rating Scale
• GMW 15357 ; Component Rating Scale
• GMW 15358 ; Fastener Rating Scale
• GMW 15359 ; White Corrosion Rating Scale Guide Gmw 15635 Determination of Aldehyde Ketone Emissions From Ingredient
• GMW 15735 ; Storage Stability Adhesives
• GMW 15919 ; Thermal Shock Test Paint Adhesion
• GMW 16284 ; Brake Rotor Cover
• GMW 16348 ; Functional, Invisible, Interior Flooring System Minimum Material Performance Requirements
• GMW 16443 ; Adhesion Performance Requirements Adhesive-Back Foam
• GMW 16879 ; Performance Requirements Ultra High Molecular Weight Polyethylene (Uhmw Pe) Tape
• GMW 16998 ; Dust Output of Fiber Sound Absorbing Pad
• GMW3010 ; Determination of Tensile-Elongation Properties
• GMW3026 ; Color Fastness Light 3.3
• GMW3026 ; Color Fastness Light 3.3
• GMW 3026 3.2.1 ; Weight 3D
• GMW 3026 3.2.11 ; Mold 15D
• GMW 3026 3.2.4 ; Breaking Load 5D
• GMW 3026 3.2.1 ; Weight 3D
• GMW 3026 3.2.10 ; fragrance 8D
• GMW 3026 3.2.11 ; Mold 15D
• GMW 3026 3.2.12 ; Fogging 10D
• GMW 3026 3.2.13 ; Flammability-As Received After Aging 13D
• GMW 3026 3.2.14 ; Dimensional Stability 8D
• GMW 3026 3.2.2 ; Stack Height 3D
• GMW 3026 3.2.3 ; Thickness 3D
• GMW 3026 3.2.4 ; Breaking Load 5D
• GMW 3026 3.2.5 ; Trouser Tear Strength
• GMW 3026 3.2.6 ; Resistance Cracking Without Bending at Cols Temperature.
• GMW 3026 3.2.7 ; Loop Pile Pulling 5D
• GMW 3026 3.2.8 ; Wear Resistance 5D
• GMW 3026 3.2.9 ; Stability Materials Against Mechanical Load 5D
• GMW 3026 3.3.1 ; Color Fastness Artificial Light 24D [5 Colors Up]
• GMW 3026 3.3.3 ; Fiber Degradation 15D
• GMW 3026 3.3.4 ; Paint Migration 8D
• GMW 3026 3.3.5 ; Colorful Casserole 5D
• GMW 3026 3.3.6 ; Water Staining / Color Fastness Water 8D
• GMW 3026 3.3.7 ; Cleanability Soil Strength 10D
• GMW 3044 ; Galvanized
• GMW3059 ; Parts of Restricted and Reportable Substances
• GMW3172 ; General Specification Electrical/Electronic Component Analytical/Development/Validation (A/D/V) Procedures Compliance Vehicle Environmental, Reliability, Performance Requirements
• GMW3182 ; Determination of Mass Per Area Replaces Gme 60301
• GMW 3205 ; Determination of Resistance Odor Emission Test Method Ingredient
• GMW3208 ; Rotary Abrasion Test, Taber Type
• GMW3211 ; Resistance Stretch Set
• GMW3221 ; Procedure Standard Conditioning Organic Materials
• GMW 3232 ; Flammability Determination Test Method Interior Flooring Materials Rev A
• GMW3235 ; Fogging Properties Trim Materials
• GMW3259 ; Mold Resistance
• GMW3274 ; Pile Distortion-Mechanical
• GMW3286 ; Procedure Neutral Salt Spray Test
• GMW 3326 ; Tear Strength Textile Materials by Trapezoid Method
• GMW 3359 ; Non-Electrolytic Applied Zinc Rich Coating
• GMW3402 ; Soil Cleaner Resistant Automotive Materials
• GMW 3405 ; Sewing Fatigue Automobile Textiles
• GMW 3431 ; General Procedure Test Keys
• GMW 3431(Paragraph 4.3.14.1) ; General Procedures Test Keys
• GMW4089 ; Procedure Determination of Laminate Curl Properties Foam Laminate Materials
• GMW4090 ; Detection Knitting Yarn Count
• GMW 4141 ; Heap Decay – Environmental
• GMW 4217 ; dimensional stability
• GMW 4700 ; Zinc Alloy Plating
• GMW 4726 ; Water Repellent Properties Automotive Textiles
• GMW 7293 ; Subjective Subsystem/Component Squeak Rattle Test
• GMW 7294 ; Stability Squeak Rattle Rating
• GMW8081 ; Static Top Cavity Gcms Ingredient
• GMW 9538 ; Weather Exposure Tests Interior Floors
• GMW3232 ; Automotive Flammability [Individual Burns]
• GM 4351; Mcorative Second Surface Treatments on Plastic Parts
• GM 4486P ; Testing of Ozone Resistance Elastomer Compounds 1995
• GM 6275M ; Door Glass Run Channels Belt Strips 2003
• GM 9126P ; Test Cleanability Textile Plastics 1992
• GM9894; Peeze Features Weatherstrips 2000
• GM9896P ; Adhesion Weatherstrips Paint, Paint Staining Wrinkle Resistance 2003
• GM9897P ; Adhesion Weatherstrips Glass Wrinkle Resistance 2003
• GM 9900P ; Cleaning / Solvent Resistance Automotive Components 2002 During Normal Customer Use
• GM B 040 0540 ; Fabric Adhesive Tape Fabric Tape 2003
• GM B 440 0029 ; Cleaning Solvent 100/140 Gasoline 100/140 2003
• GM B 440 0064 ; Alcohol, Denatured Alcohol, Denatured 2007
• GME 00002 ; General Requirements Colored Plastic Components External Use General Requirements Colored Plastic Exterior Parts 2005
• GME 00004 ; General Requirements Integrated Colored Plastic Components Indoor Use General Requirements Colored Plastic Interiors 2004
• GME 00211 ; Performance Requirements Paint Applied on Plastic Parts Finishing Components Interior Use General Requirements Coatings Interior Plastic Surfaces 2006
• GME 00251 ; Electrolytically Deposition Multilayer Systems 1993
• GME 01002 ; Requirements Lacquer Coating Elastomeric Body Gaskets Demands Lacquer Coating on Elastomer Gaskets 2003
• GME 01004 ; Door Rear Compartment Seals Combined Push-On Carriage Door Rear Compartment Seals Edge Guard 2004
• GME 01007 ; Sealing Profiles Glued Glass Sealing Profiles Glued Panels 1989
• GME 01124 ; Door Edge Panel Side Panel Door Side Coating 2001
• GME 01125 ; Door Remote Control Handle , Inner Handle Door Remote Control Indoor 2001
• GME 08004 ; Elastomeric Vacuum Hoses Vacuum Hoses Elastomer 1992
• GME 08200 ; Charcoal Filters Activated Carbon Filter 2004
• GME 12505-1 ; Lamps Headlamps Lamps Spots 2002
• GME 13003 ; Passenger Car - Heating - Ventilation Air Conditioning, Part 1, General Requirements Vehicle - Heating - Ventilation Air Conditioning, Part 1, General Requirements 1995
• GME 14022 ; Single Core Cables 2004
• GME 14074 ; Sunscreen Insect Repellent Resist Resistance Sun Insect Repellent 2007
• GME 60202 ; Termination Resistance Automotive Components High Humidity Environments 1981
• GME 60243 ; Termination Tension Set At Constant Elongation Termination Train – Deformation Residue After Constant Deformation 1979
• GME 60244 ; Termination Adhesion Elastomer Glass Or Painted Sheet Anklebeverhalten Elastomers Glass Or Painted Sheet 1976
• GME 60251 ; Termination Ozone Resistance Elastomers Ozone Resistance Elastomers 1976
• GME 60252 ; Termination Identification Hardness by Durometer (Shore AD) Hardness Test Shore AD 1976
• GME 60258 ; Accelerated Aging Test Elastomers Artificial Aging Elastomers 1976
• GME 60259 ; Cold Resistance Elastomers Cold Resistance Elastomers 1976
• GME 60261 ; Termination Flammability Materials Vehicle Interiors 1995
• GME 60262 ; Termination Resistance Protective Wax Remover Elastomer Profiles Schutzwachsentferner Resistance Elastomer Profiles 1989
• GME 60268 ; Finishing Resistance Stone Impact Sudace Coatings, Plastic Self Adhesive Films Chip Resistance Organic Coatings, Plastic Self Adhesive Films 1997
• GME 60269 ; Test Method Determination of Wear Resistance Metallized, Painted, Printed etc. Plastic Parts Test Wear Resistance Coated Plastic Parts 2003
• GME 60271 ; Formaldehyde Termination from Molded Parts Hanes Vehicle Interior Termination Formaldehyde Release Molding Vehicle Interior 1998
• GME 60276 ; Test Method Resistance Determination Odor Emission Trim Material Determination Odor Behavior Materials Bodywork Equipment 2000
• GME60280 ; Scratch Mar Resistance (Surface Conditioned Plastics) Scratch Resistance Write Effect (Surface Coating Plastics) 2004
• GME 60290 ; End Hardness by Pressing an Indenter Cellular Components, Constant Force 1997
• GME 60292 ; Finishing Color Fastness Resistance Artificial Light Rating Light Fastness Light Fastness 2000
• GME 60301; Determination of Unit Area Weight Determination of basic weight 1977
• GME 60302 ; Determination of Upholstery Softness Material Softness Plastic Films, Synthetic Leather Textile Fabrics 1977
• GME 60303 ; Thickness Detection Trim Material Thickness Detection Materials Bodywork Equipment 1986
• GME 60305 ; Determination of Stretch Permanent Set Properties Textile Leather Fabrics Dahnung Permanent Increase Determination of Textile Fabrics Artificial Leather 1977
• GME 60306 ; Determination of Low Temperature Resistance Determination of Automotive Trim Material Cold Resistance Plastic Films Art Idle 1977
• GME 60307 ; Determination of Temperature Stability Automotive Trim Material Test Temperature Resistance Materials Superstructure Properties 1977
• GME 60325 ; Determination of Tensile Properties Body Trim, Sealing Material, Silencers etc. Tensile Test Materials Superstructure Equipment, Seals, Damping Plates etc. 1989
• GME 60326 ; Evaluation of Fogging Properties Trim Material Volatility Organic Compounds (Fogging Effect) Materials Used Bodywork Equipment 1996
• GME 60329 ; Resistance Detection Thread Tear Trim Material Detection Stichausreißwiderstandes Fabrics 1977
• GME 60334 ; Determination of Tear Strength Textile Fabric Coated (Single Tear Method) Determination of Tear Strength Artificial Leather, Etc. Textile Fabrics 1977
• GME 60341 ; Seam Strength Determination Upholstery Upholstery Material Detection Seam Strength 1988
• GME 60400 ; Determination of Abrasion Resistance Organic Coatings Abrasion Resistance Organic Coatings 1979
• GME 60401 ; Cross Scan Test Organic Coatings Cross Cut Test Organic Coatings 2005
• GME 60402 ; Finishing Scratch Resistance Organic Coating Scratch Resistance Organic Coatings 2002
• GME 8742 ; Specific Bulk Resistance Testing Elastomers, Plastic Adhesives Inspection Bulk Resistance Elastomers, Plastic Adhesives 2004
• GME 8761; Test Push-On Tensile Forces Sealing Profiles Body Zone Inspection Placement Tensile Forces Body Gaskets Organic Coatings Applied in Performance Requirements Automotive Plastic Parts Components General Requirements Organic Coatings 2003
• GME L0002 ; Synthetic Perspiration Solution Synthetic Welding Solution 1978
• GMI 00004 ; General Requirements Integrated Colored Plastic Components Indoor Use General Requirements Colored Plastic Interior Parts 2000
• GMI 60206; Termination Resistance Corrosion Automotive Components Determination of Corrosion Resistance Vehicle Parts by Salt Spray Fog Test Salt Spray 1998
• GMI 60254; Termination Compatibility Different Materials Contact Inspection Verträglichkevito N Contact Materials in Every 2000
• GMI 60262; Finishing Resistance Protective Wax Remover Elastomer Profiles Protective Wax Resistance Elastomer Profiles Remove 2000
• GMI 60266; Finishing Resistance Cleaning Agents Automotive Trim Components Reinigungsmittelbestindigkeit Plastics, Organic Coatings Self Adhesive Films 1997
• GMI 60267; Termination Impact Resistance Plastic Components Impact Determination Kunststoffteiien 1996
• GMI 60275; Termination Resistance Synthetic Perspiration Solution Automotive Trim Components Resistance From Parts Inner Body Synthetic Perspiration Resistance Solution 2000
• GMI 60307; Test Method Determination of Temperature Stability Automotive Trim Material Test Temperature Resistance Materials Used Bodywork Equipment 2000
• GMI 60333; Test Method Determination of Ignition Residue (Ash) Polymeric Materials Ignition Residue Determination 2000
• GMI 60340 ; Test Method Determination of Heat-Aging Tensile Elongation Properties of Plastic Film Determination of Heat-Aged Elongation at Break Plastic Film 2000
• GMI 60347; Adhesion Strength Dielectric Produced Welding Seams Assembly Components Internal Equipment Adhesion Dielectric Produced Welds Together Components Internal 2000
• GMN 8020 ; Lamps – Development Validation Test Procedures 2006
• GMW 14093 ; Termination Impact Resistance Plastic Components 2005
• GMW14109 ; Door Edge Panel Side Panel Door Side Coating 2005
• GMW 14124 ; Automotive Environmental Cycles 2006
• GMW14126 ; Resistance Cold Crack Folded Materials 2005
• GMW 14236 ; Formaldehyde Release Termination from Molded Parts Vehicle Interior 2006
• GMW 14357 ; Procedures Testing Determination of Cellular Related Materials Resistance Moisture Aging 2007
• GMW 14444; Material-Related Internal Part Performance 2006
• GMW14650 ; Performance Requirements Exterior Plastic Parts 2006
• GMW 14651 ; Material-Related Interior Plastic Part Performance Monolithic Plastic Parts Injection Molded Plastic Surfaces 2007
• GMW 14685 ; Termination Compressibility Cellular Elastomer at a Defined Deviation 2007
• GMW 14701 ; Resistance Coatings Chemical Etching Distortion 2006
• GMW 14797 ; Exterior Plastic Engine Compartment Painted Parts Performance Requirements 2007
• GMW 14867 ; Performance Requirements Interior Plastic Surface Paints 2007
• GMW 15058 ; Polyurethane Foam Coated Underground Flooring Trim Pads 2007
• GMW 15310 ; Cooling System Balancing Tank Assembly 2007
• GMW3013 ; General Requirements Processing Technical Conditions Delivery Plastics 2002
• GMW 3044 ; Zinc Plated 2005
• GMW3059 ; Restricted Reportable Substances Sections 2007
• GMW 3091 ; General Specifications Tools, Electromagnetic Compatibility 2006
• GMW 3097 ; General Specification Electrical / Electronic Components Subsystem, Electromagnetic Compatibility 2006
• GMW 3103 ; General Specification Electrical / Electronic Components Subsystem, Electromagnetic Compatibility Global Emc Component / Subsystem Verification Acceptance Process 2006
• GMW 3116 ; Recyclability/Recoverability Guidelines 2006
• GMW3191 ; Connector Test Verification Specification 2007
• GMW 3205 ; Test Method for Determination of Resistance Odor Emission Ingredient 2000
• GMW 3232; Test Method Flammability Determination Interior Trim Materials Determination of Combustion Behavior of Motor Vehicle Interior Trim Materials 2007
• GMW3235 ; Fogging Properties Trim Material 2005
• GMW 3431 ; General Procedures Test Keys 2001
• GMW 4659 ; Compatibility Flooring Materials 2001
• GMW 6992 ; Visual Evaluation Automotive Upholstery 2002
• GMW8081 ; Static Headspace Gc Ms Internal Materials Internal Emissions 2005
• QK 000 102 ; Polyamide 6 Fiberglass Polyamide 6 Glass Fiber 1998
• QK 002 000; Your wife 1999
• QK 003 500; Te (Epdm-X + Pp) 1998
• QK 003 800 ; Types of Polypropylene Filled Materials Types of Polypropylene Materials Fillers 1994
• QK 006 600 ; Pbt – Gt .Pbt – Gb .. 1998
• QK 007 000 ; S / Eb / S Material Types Material Types 1993
• QT12 6595 ; Ready Connect Electrical Cables Motor Vehicles 1985
• Q 000 000 ; Admissibility Rules Dangerous Goods Regulation Permissibility Dangerous Goods 1998
• QU 000 001 ; Requirements Fulfillment of Environmental Laws Requirements for Fulfillment of Environmental Protection Laws of 1995
• QU 000 003 ; Environmental Protection Regime Cfc Halo Ban Regulation Environmental Protection Cfc Halon Ban 1994
• QU 000 005 ; Environmental Regulation Phenol Ban Environmental Protection Regulation Phenol Ban 1995
• 0096Z-SEC-A000 ; Quality Surface Coating Internal Parts Resin 2002
• 7710Z-SCC-9000 ; Specification Inst Parts (General) 2001
• 8320Z-SDA-0000 ; Specification Roof Lng Assy 2002
• HES 6506 5.11.2 ; cracking
• HES C210-00 4.16; Fragrance Feature
• HES D6003-99 ; Flammability [Preconditioning Aging]
• HEPP D6057-00 4.17 ; Wet Heat Aging
• HEPP D6057-00 4.18 ; heat resistance
• HES D6506 ; tassel binding
• HES D6506 5.8 ; Flexibility
• HEPP D6506-00 5.11.1 ; color fastness to wash
• HES D6507 ; Sliding Load
• HEPP D6507 5.11.1 ; Odor Fastness Washing
• HEPP D6507-00 4.18 ; heat resistance
• HES D6508 ; Honda Haze Fogging Test
• HES D6601 ; Color fastness Light
• 0096Z-STX-A000 ; Mirror Insole Coating
• 4251Z-SEP-A000 ; Quality Geometric Coating on Brake Rotor
• 5100Z-S04-0000 ; Painting Quality Automobile Suspension Arc Welded Parts
• 5100Z-SG0-A000 ; Coating on Iron-Zinc Alloy Coated Sheet by Hot Dip Process
• D2016-07 Rev.4 ; General Coating (On Metals)
• D2023-07 Rev.4 ; Heat Resistant Coating (Over Metal)
• D2028-07 Rev.3 ; Oil Resistant Coating (On Metals)
• HES C206-99A; Flammability Auto Interior Parts
• HEPP D2003-03 ; Electroplating Coating (For Anti-Corrosion, Anti-Rust Decoration)
• HEPP D2008-03 ; Zinc-Aluminum Composite Coating
• HES D2018-99 ; General Coating (On Resins)
• HEPP D2021-04 ; Corrosion Resistant Coating (On Metals)
• HEPP D6001-04 ; General Test Method Coating
• HEPP D6003-12 ; Flammability Test Methods Automobile Interior Parts
• HEPP D6501-03 ; General Test Method Coating
• HEPP D6501-06 ; General Test Methods Coatings
• HJS-3217; Chemical Conversion Coating Curing Time Study
• Honda Jet Model HA-420 ; Environmental Impacts Test Procedure Reclosable Fasteners
• AD 209-03 ; Colorfastness Light (1-10 Examples)
• MS-210-05; Molded Plastic Parts – Indoor Use
• MS-300-08 ; Fire Resistance – Ingredient
• MS-300-34 ; Test Method Odor Internal Parts
• MS-300-54; Standard Test Method – Fogging
• ISO 105-A02 ; Textiles – Color Fastness Tests – Part A02 Evaluating Grayscale Change Color
• ISO 105-G02 ; Textiles – Color Fastness Tests – Part G02 Color Fastness Burnt Gas Fumes
• ISO 1133; Plastics-Detection Melt Mass Flow Rate (Mfr) Melt Volume-Flow Rate (Mvr) Thermoplastics
• ISO 11357; Plastics - Differential Scanning Calorimetry (Dsc)
• ISO 11358; Plastics – Thermogravimetry (Tg) Polymers – General Principles
• ISO 11359; Plastics – Thermomechanical Analysis (Tma) – Part 3 Determination of Penetration Temperature
• ISO 1172; Textile Glass Reinforced Plastics – Prepregs, Molding Components Laminates – Fixation Textile Glass Mineral Filler Content Calcination Methods
• ISO 1183-1(Method A); Plastics – Methods for Determining the Density of Non-Cellular Plastics
• ISO 1184; Plastics – Determination of Tensile Properties Films
• ISO 1218(Method B); Plastics - Polyamides - Determination of "Melting Point"
• ISO 1326; Plastics – Flammability Detection Burn Rate Plastic Form Film
• ISO 13934; Textiles – Tensile Properties Fabrics – Part 1
• ISO 14125; Fiber Reinforced Plastic Composites – Determination of Flexural Properties
• ISO 1431-1; Rubber, Vulcanized or Thermoplastic - Resistant Ozone Cracking - Part 1 Static Dynamic Strain Testing
• ISO 15512 ; Plastics – Determination of Water Content
• ISO 1628 ; Plastics – Determination Melt Mass-Flow Rate (Mfr) Melt Volume-Flow Rate (Mvr) Thermoplastics
• ISO 171 ; Plastics – Determination of Cast Factor Molding Materials
• ISO 175; Plastics – Method Test Detection Effects Immersion Liquid Chemicals
• ISO 176; Plastics – Loss Determination Plasticizers – Activated Carbon Method
• ISO 178; Plastics - Determination of Flexural Properties
• ISO 179; Plastics – Determination of Charpy Impact Strength
• ISO 1798 ; Flexible Cellular Polymeric Materials - Determination of Tensile Strength Elongation at Break
• ISO 180 ; Plastics – Determination of Izod Impact Strength
• ISO 1817; Rubber, Vulcanized - Fixative Liquids
• ISO 183 ; Qualitative Evaluation Bleeding Colorants
• ISO 1856; Flexible Cellular Polymeric Materials – Fixation Compression Set
• ISO 188 ; Rubber, Vulcanized or Thermoplastic – Accelerated Aging Heat Resistance Tests
• ISO 1926; Rigid Cellular Plastics - Determination of Tensile Properties
• ISO 2039-2; Plastics - Determination of Hardness - Part 2 Rockwell Hardness
• ISO 20433; Leather – Color Fastness Tests – Color Fastness Crocking
• ISO 2062 ; Textiles – Yarns from Packages – Determination of Single End Breaking Force Elongation at Break
• ISO 2409; Paints Varnishes – Cross Cut Test
• ISO 2578; Plastics - Setting Time-Temperature Limits After Prolonged Heat Exposure
• ISO 2589; Leather - Physical Mechanical Tests - Thickness Determination
• ISO 2796; Cellular Plastics, Rigid – Test Dimensional Stability
• ISO 2808(Method 5); Paints Varnishes – Determination of Film Thickness
• ISO 291; Plastics – Standard Atmosphere Conditioning Test
• ISO 294-4; Plastics – Injection Molding Test Specimens Thermoplastic Materials – Part 4
• ISO 306; Plastics – Thermoplastic Materials – Determination of Vicat Softening Temperature (Vst)
• ISO 307; Plastics - Polyamides - Determination of Viscosity Number
• ISO 3146(Method C); Plastics – Determination of Melting Behavior (Melting Temperature or Melting Range) Determination of Semi-Crystalline Polymers by Capillary Tube Polarization-Microscope Methods
• ISO 3268 ; Plastics - Glass Reinforced Materials - Determination of Tensile Properties
• ISO 3386; Plastics – Determination of Melting Behavior (Melting Temperature or Melting Range) Determination of Semi-Crystalline Polymers by Capillary Tube Polarization-Microscope Methods
• ISO 34 ; General Requirements Competence Reference Material Manufacturers
• ISO 3451; Plastics – Determination Ashes
• ISO 37 ; Rubber, Vulcanized or Thermoplastic - Determination of Tensile Stress-Strain Properties
• ISO 3795; Road Vehicles, Tractor Machinery Agriculture Forestry - Determination of Combustion Behavior Internal Materials
• ISO 4440 ; Polyethylene (Pe) Pipe Fittings – Determination of Melting Flow Rate
• ISO 4577; Polypropylene Propylene-Copolymers – Determination of Thermal Oxidative Stability Air – Furnace Method
• ISO 4585 ; Textile Glass Reinforced Plastics - Determination of Visible Intertaminar Shear Properties by Short Beam Test
• ISO 4587; Adhesives - Tensile Lab-Shear Strength Determination Rigid-to-Rigid Bonded Assemblies
• ISO 4599 ; Plastics - Fixation Strength Environmental Stress Cracking (Esc) - Twisted Strip Method
• ISO 4611 ; Plastics – Detection Effects Exposure Moist Heat, Water Spray Salt Mist
• ISO 4892 ; Plastics – Methods Exposure Laboratory Light Sources
• ISO 5084 ; Textile – Thickness Determination Textile Textile Products
• ISO 527 ; Plastics - Determination of Tensile Properties - Part 5 Test Conditions Unidirectional Fibre-Reinforced Plastic Composites
• ISO 5402 ; Skin – Physical Mechanical Tests – Determination of Flexion Resistance by Flexometry Method
• ISO 604; Plastics – Determination of Pressure Properties
• ISO 6133; Rubber Plastics – Analysis Detections Obtained with Multi-peak Tracks Tear Strength Adhesion Strength
• ISO 62 ; Plastics – Determination of Water Absorption
• ISO 6237; Adhesives – Wood-Wood Adhesive Bonds – Determination of Shear Strength by Tensile Loading
• ISO 6238; Adhesives – Wood-Wood Adhesive Bonds – Determination of Shear Strength by Pressure Loading
• ISO 6239; Plastics – Determination of Tensile Properties Using Small Samples
• ISO 6383 ; Plastics. Film Coating. Detection Tear Resistance. 1) Trouser Tear Method & 2) Elmendorf Method
• ISO 6427 ; Determination of Plastic Extractable with Organic Solvent (Traditional Methods)
• ISO 6452; Rubber or Plastic Coated Fabrics – Determining Fogging Properties Trim Materials Interior Automobiles
• ISO 6603; Plastics – Determination of Puncture Impact Behavior Rigid Plastics – Part 1 Toolless Impact Test and Section 2 Instrument Puncture Testing
• ISO 6722; Road Vehicles - 60 V 600 V Single Core Cables - Part 1 Dimensions, Test Methods Requirements Copper Conductor Cables
• ISO 6964; Polyolefin Pipe Fittings – Determination of Carbon Black Content by Calcination Pyrolysis – Test Method Basic Specification
• ISO 6988 ; Metallic Other Non-Organic Coatings – Sulfur Dioxide Test General Condensation Humidity
• ISO 7326; Rubber Plastic Hoses - Evaluation of Ozone Resistance in Static Conditions
• ISO 75 ; Strategic Principles Iec Iso Standardization of the Future Industrial Automation
• ISO 7765; Plastic Film Coating - Determination of Impact Strength by Free Falling Dart Method Part 1 Ladder Methods and Part 2 Instrument Puncture Testing
• ISO 8033 ; Determination of Adhesion Between Rubber-Plastic Hose-Compounds
• ISO 8067; Flexible Cellular Polymeric Materials - Fixation Tear Strength
• ISO 812 ; Rubber, Vulcanized or Thermoplastic – Determination of Low Temperature Brittleness
• ISO 815 ; Rubber, Vulcanized or Thermoplastic - Ambient, High or Low Temperature Detection Compression Kit
• ISO 8295; Plastics – Film Coating – Determination Coefficients Friction
• ISO 844 ; Rigid Cellular Plastics – Determination of Compression Properties
• ISO 845; Cellular Plastic Rubbers – Apparent (Bulk) Density Determination
• ISO 846; Plastics – Assessment Action Microorganisms
• ISO 868 ; Phosphoric Acid Industrial Use - Determination of Calcium Content - Titrimetric Method
• ISO 960(Method A); Plastics – Determination of Water Content Polyamides
• ISO 974; Plastics – Determination of Brittleness Temperature Based on Impact
• Electric road vehicles - safety features - Part 3; Protective Persons Against Electrical Hazards
• Iveco 15-5030 ; General Specifications – Classification Part Numbering Procedure Elastomer Materials 2005
• Iveco 15-5031 ; Guidelines for Selecting Vulcanized Rubbers Summary Tables 2005
• Iveco 16-0135 ; Corrosion Test 1991
• Iveco 16-0140 ; Permanent Humidity Heat Test 1986
• Iveco 16-0154 ; Combustion Resistance Measurement Non-Metallic Materials Passenger Compartment Interior Parts 2002
• Iveco 16-0170 ; Accelerated Aging Light Method Internal Cabinet Components 1992
• Iveco 16-0176 ; Burn Rate Test Vehicle Body Exterior Non-Metallic Material Components 2003
• Iveco 18-1600 ; Finishing Metallic Parts That Make Up An Industrial Vehicle Protective Paint 2006
• Iveco 18-2252 ; General Condition Applications in Electronic Electro-Telematics Devices in Industrial Vehicles 2007
• Iveco 18-8000 ; Various Parts Made of Plastic Material (Thermoplastic Or Thermoset One) 2004
• AN101-01 ; Bleeding
• JMS 20.14.03 ; Molded Fiberboards 2002
• JNS 30.21.03; Size Convenient Stability 1992
• JNS30.21.0; 7Dr
• JNS30.21.07; weight
• STJLR.50.5151; Performance Requirements Chrome Coated Polymer 2005
• STJLR.51.5262; Performance Requirements Plastic 2004
• TPJLR.52.353; Accelerated Climate Cycling 2004
• JIS D0205; Test Method Weatherability Automotive Parts
• JIS Z 8703; Standard Atmospheric Conditions Test
• ES 97405-03 ; Duct Installation - Air Vent 2003
• AD 120-89; Synthetic Rubber Compounds 1978
• 200-40 AD; Test Method Wear on Vulcanized Rubber (Akron Type) 2004
• AD 200-41; Test Standard – Soft Vulcanized Rubber 2004
• AD 200-48 ; Standard Test Method – Exterior Plastic Parts 1998
• AD 201-01 ; Marking Materials Automotive Parts 2001
• AD 201-02 ; Prohibited Use Heavy Metal Automotive Parts 2006
• MS 210-05; Molded Plastic Parts – Indoor Use 2006
• MS 210-05 4.3; Heat Cycle Resistance
• MS 210-06; Molded Plastic Parts – Outdoor Use 2007
• AD 211-46; Polyamide 66 (Non Reinforced) 2008
• AD 211-47; Polyamide 66 (Gf, Mf – Reinforced) 2006
• AD 213-26; Hcpp + Ldpe Alloy 2006
• AD 213-28; Talc Filled Polypropylene 2008
• AD 213-41; Polypropylene Foam 2000
• AD 213-42; Scratch Resistant Polypropylene Copolymer – Injection Molded Interior Exterior Parts 2004
• AD 213-43; Filled Pp , Scratch Resistant Injection Molded Interior Exterior 2008
• AD 225-18; Abs – Heat Resistance 1999
• AD 237-09; Polyacetal (Acetal Copolymer, Oxymethylene Copolymer) 2007
• AD 260-13; Sponge Rubber 2005
• AD 300-08 ; Fire Resistance – Ingredient 2006
• AD 300-33 ; Test Standard – Tapes, Film (with Pressure-Sensitive Adhesives) 1989
• AD 300-34 ; Test Method Odori Internal Parts 2002
• AD 300-35 ; Section 4.9 Tabor Resistance
• AD 300-54; Standard Test Method – Fogging 2002
• AD 300-55; Test Method Volatile Organic Compounds Version 2005
• AD 341-12; Sound Absorber – Engine Compartment 2002
• AD 361-13; Powder Wood Containing Polypropylene Sheet 2005
• AD 373-14; Ribbon Tape – Interior Exterior 2003
• AD 600-35 ; Test Methods Coatings Coating Films 1996
• AD 630-01; Painting – Metal Products (Rust Prevention) 2004
• AD 652-12; Soft Feel Paint – Internal Plastic Parts 2006
• AD 652-14; Painting – Rigid Thermoplastic Parts 2006
• AD 711-10; Tape (Double – Side Adhesive) – Sign, Emblem 2005
• Lexus 7.1 ; Stack
• Lexus 7.10 ; Flammability (As Taken After Aging)
• Lexus 7.12 ; Odor Analysis (Wet & Dry)
• Lexus 7.13 ; Beating Method A & B
• Lexus 7.16 ; Color Fastness Mild Slight Aging
• Lexus 7.2 ; Thickness
• Lexus 7.3 ; Tensile Strength (Warp and Weft)
• Lexus 7.4 ; Tear Strength (Warp Weft)
• Lexus 7.5.1 & 7.5.2 ; Wear Tightness Tear Loss
• Lexus 7.6; Heat Shrinkage
• Lexus 7.7 ; hardness
• Lexus 7.8 ; Tensile Strength After Heating (Warp & Weft)
• Lexus 7.9 ; Changing the Inter-gauge Length (Warp & Weft)
• M3055-2; Number of Hoses Bellows Hose Lines Filling Air Commercial Vehicles 2002
• MAN 334, 02; Molded (Molded) Parts with Sleeves Directing Cooling Water Vehicles 1991
• MES CF 050C ; Flammability Internal Parts
• MES MN 401D ; Automotive Use Vinyl Skins
• AK LV 110 ; Pur Foam Steering Wheel Cover 2003
• DBL 5306; General Technical Delivery Requirements Test Methods Materials Interior Hardware Similar Articles 2002
• DBL 5307; Reduced Flammability, Mils Interior Vehicle Requirements Test Code 2000
• DBL 5381; Spray Powder Skins 2003
• DBL 5400 ; Components Made from Glass Fiber Reinforced Thermosets 1997
• DBL 5404 ; Parts Thermoplastic Materials Direct Indirect Space Passenger Compartment, Passenger Compartment Heater, Passenger Compartment Ventilation, Panel Housing 2008
• DBL 5410 ; Parts Thermostatic Synthetic Operating Controls, Bearing Fasteners, Spacers 1999
• DBL 5416 ; Parts Made of Thermoplastic Plastics Externally Applied Coatings, Enclosures Functional Parts 2002
• DBL 5471; Recipe Supply, Piece Flooring Flooring Piece Per Vehicle (Combined Pieces) 2000
• DBL 5481; Extruded Plastic Panels With Deep Drawing 2001
• DBL 5485 ; Direct Laminate Coatings Vehicle Interiors (Back Compressing / In Mold Decoration) 2000
• DBL 5527 ; Choice
• DBL 5555 ; Prefabricated Parts Semi-Finished Products Made of Organic Polymer Materials General Conditions Test Methods 2001
• DBL 5556 ; Normal Mechanical Requirements for Molded Elastomer Parts 2001
• DBL 5558 ; Elastomer Parts Mechanical-Dynamic High Very High Stress, Thermally Claimed Up To 100 °C 2004
• DBL 5565 ; Elastomer Parts Thermally 120°C 150°C Claimed, Resistant Grease Fuels 1995
• DBL 5568 ; Claimable Elastomer Parts Thermally 120 °C 150 °C, Medium Strength Mineral Oil Products 1995
• DBL 5571; Sealing Profiles / Moldings Made of Elastomers, Predominantly Body Area Thermally 70 °C Continuous 100 °C Short Term Requestable 2008
• DBL 5572 ; Check Multi-Ply Floor Coverings 1997
• DBL 5573 ; Profiles Profiles Made of Foam Rubber (Foamed Elastomers Open-Closed Cell Structure) 2002
• DBL 5575 ; Textilbeflockte Elastomer Parts Body Gaskets Car Interior Plastic Parts 1996
• DBL 5578; Glued varnish coated elastomer parts 2001
• DBL 5620 ; Organic Glass Lighting Regulations 1977
• DBL 5818 ; knitting 2002
• DBL 7384; Selected Parts Delivery Regulation Mercedes-Benz Dbl 7384 Delivery Specification - Coating of Plastic Parts in Vehicle Interiors June 2004 2004
• DBL 7391; Coating / Painting Parts High Abrasive Stress 2006
• DBL 7399 ; Varnishes, Paints and Coatings Related to Varnishes. General Condition Tests 1997
• DBL 7904; Glued Links in Components 2001
• DBL 8230 ; Design Recipe Daimler – Benz, Labels 1982
• DBL 8585 ; Negative Item List Material Selection 2002
• MS-EA 121; Hose – Heater/Radiator – Heavy Duty 2004
• MS-EA 122 ; Hose – Heater/Radiator – Electrochemical Resistant 2003
• PB VWL 709; Analysis of Emission Volatile Condensable Substances from Vehicle Interior Materials by Thermal Desorption 2001
• SP 121.02; Specification Suppliers 2008
• ECE-R100 ; Uniform Provisions Regarding Approval of Battery Electric Vehicles Construction Operational Wisdom Regarding Special Requirements
• MBN LV 123 ; Electrical Properties Electrical Safety High Voltage Components Road Vehicles-Requirement Tests
• MES MN 405 ; Section 7.7 Fixed Load Elongation
• MES MN 405 7.12; Pile Tensile Strength
• MES MN 405 7.15 ; Pilling and Amp Fuzzing
• MES MN 405 7.21; Colorfastness Friction
• MES MN 405 7.22; color fastness to wash
• MES MN 405 7.23. ; 1 Method AB Color Fastness Light
• MES MN 405 7.25; Color fastness Heat
• MES MN 405 7.29; Heat Aging Support Material
• MES MN 405 7.30 ; Lost Heating
• MES MN 405 7.31; Stickiness
• MES MN 405 7.38; Mold
• MES MN 405 7.5.1 ; Tensile and Amperage Elongation [Strip Method]
• MES MN 405 7.6.1 ; Tear Strength Method A
• MIL STD 810C ; Environmental Test Methods.
• ES-X60210; Plastic Parts – Interior Trim
• ES-X60410; Flammability Ingredient
• ES-X83217; Polyvinyl Chloride Coated Fabrics Polyvinyl Chloride Sheet Interior Exterior
• ES-X83231; Standard Test Method Fogging Ingredient
• ES-X83239; Standard Test Methods – Internal Plastic Parts
• EX 60410; flammability
• 24022 NDS01 ; Cold Resistant Vinyl Tubing Harness 2006
• 48950 NDS00 ; Steering Hole Cover 1996
• 76804 NDS00 ; Channel Installation – Draft 2006
• M0076 [2005-N]; Test Methods Automotive Carpet
• M0094 [2015-N] ; Test Method Flammability Interior Materials Automobiles
• M0131 [2007-N]; Methods High Temperature Test Passenger Compartment Synthetic Resin Parts
• M0132 [2007-N]; Methods Thermal Cycle Test Plastic Parts
• M0133 [2010-N] ; Test Methods Chemical Resistance Plastic Parts
• M0134 [2004-N]; Falling Ball Impact Test Methods Synthetic Resin Pieces
• M0135 [2008-N] ; Weather Resistance Light Resistance Test Methods Synthetic Resin Parts
• M0136 [2005-N]; Abrasion Resistance Test Methods Plastic Parts
• M0138 [2004-N]; Cass Test Method
• M0140 [2009-N] ; Salt Spray Test
• M0141 [2008-N] ; Methods Test Coating Synthetic Resin
• M0153 [2006-N] ; Test Methods Moisture Resistance Plastic Parts
• M0158 [2014-N] ; Methods Compound Corrosion Test
• M0159 [2008-N] ; Test Methods Scratch Resistance Internal Polypropylene Resin Parts
• M0160 [2015-N] ; Method Test Odor Insets
• M0161 [2005-N]; Method Fogging Test Ingredient
• M0301 [2015-N] ; Substance Use Restriction
• M0402 [2015-N] ; Voc Test Method Cabinet Parts
• M2027 [2009-1] ; Zinc Plated (Hot Dip) Steel Strips on Steel Plates Automobiles
• M4601 [2006-1]; Anti-Corrosion Zinc Aluminum Compound Coating
• M5083 [2009-N] ; Anti Rust Coating Materials Auto Parts
• M7105 [2006-N] ; Vinyl Chloride Flooring Board Automobiles
• M8011 [204-1]; Abs, Aas, Aes, Resin (Contains Polymer Alloy Resin Another Resin)
• M8506 [2008-N] ; Pressure Sensitive Adhesive Double Sided Tapes Automobiles
• MES MN 405 Section 7.7 ; Fixed Load Elongation
• MES MN 405 ; Wear Resistance Method BA
• MES MN 405 7.12; Pile Tensile Strength
• MES MN 405 7.15 ; Pilling and Pilling
• MES MN 405 7.21; Colorfastness Friction
• MES MN 405 7.22; color fastness to wash
• MES MN 405 7.23.1 Method AB ; Color Fastness to Light (1 – 10 Samples)
• MES MN 405 7.25; Color fastness Heat
• MES MN 405 7.29; Heat Aging Support Material
• MES MN 405 7.30 ; Lost Heating
• MES MN 405 7.31; Stickiness
• MES MN 405 7.38; Mold
• MES MN 405 7.5.1 ; Tensile and Elongation (Strip Method)
• MES MN 405 7.6.1 ; Tear Strength Method A
• NES 7105.11 ; cold resistance
• NES D5801 ; Specification Water Hoses Automobiles 2003
• NES M0076 ; Yellowing with Nitrogen Oxides Section 17B
• NES M0076.12 ; Elongation at Break
• NES M0076.14 ; tassel binding
• NES M0076.16 ; Wear resistance
• NES M0076.21 ; Resistor Light Additional Example
• NES M0076.25 ; Thermal Cycle Test
• NES M0076.27 ; High Temperature Heat Resistance
• NES M0076.32 ; waterproof
• NES M0076.34 ; Smell Test
• NES M0132 ; Thermal Cycle Test Methods Plastic Parts 1994
• NES M0133 ; Chemical Resistance Test Methods Plastic Parts 2002
• NES M0133 Method 2 ; chemical resistance
• NES M0135 ; Weather Resistance Light Resistance Test Methods Synthetic Resin Parts 2001
• NES M0153 ; Test Methods Moisture Resistance Plastic Parts 2006
• NES M0301 ; Substance Use Restrictions 2003
• NES M0501 ; Test Methods Vulcanized Rubber Painting 2002
• NES M7105 ; chemical resistance
• Nissan M0135 1-11-2 ; Color Fastness Light / Nissan Method
• Nissan NES M0076 ; Test Methods Automotive Carpet
• Nissan NES M0094 ; Test Method Flammability Interior Materials Automobiles
• Nissan NES M0131 ; Methods High Temperature Test Passenger Compartment Synthetic Resin Parts
• Nissan NES M0132 ; Thermal Cycling Test Methods Plastic Parts
• Nissan NES M0133 ; Chemical Resistance Test Methods Plastic Parts
• Nissan NES M0134 ; Falling Ball Impact Test Methods Synthetic Resin Pieces
• Nissan NES M0135 ; Weather Resistance Light Resistance Test Methods Synthetic Resin Parts
• Nissan NES M0136 ; Abrasion Resistance Test Methods Plastic Parts
• Nissan NES M0140 ; Salt Spray Test
• Nissan NES M0142 ; Physical Test Methods Vulcanized Rubber
• Nissan NES M0161 ; Method Fogging Test Ingredient
• Nissan NES M7081 ; Polyvinylchloride Coated Fabric Automobiles
• MBN LV 123 ; Electrical Properties Electrical Safety High Voltage Components Road Vehicles-Requirement Tests
• MBN LV-124 ; Electrical Electronic Components Motor Vehicles Up to 3,5T-General Requirements, Test Conditions Tests
• MBN LV-148 ; Electrical Electronic Components Vehicle 48V-Vehicle Electrical System Requirement Tests
• PN 780 ; Internal Emissions Behavior 2008
• PPV4014 ; External Weathering Testing of Non-Metallic Materials Dry-Hot Air / Hot, Humid Air 2006
• PTL 4401 ; Plastic Adhesives Volume Resistivity Requirements Tests 2007
• PTL8140 ; Interior General Requirements Components WIP Material Requirements Test 2008
• PTL 8501 ; Finishing Combustion Behavior Materials Used Interior Automotive Upholstery Fmvss No. 302 According to 1991
• 1309; Aging Parts of Flooring Materials Gives Next Cycle Climate 1995
• 16 – 00 – 003 / F ; Plastic Parts 2003
• 1646; Transverse Resistant Rubbers Plastics, 1995
• 32 – 00 – 008 / G ; Interior Trim Parts 2004
• 32 – 00 – 008 / J ; Interior Trim Parts 2007
• 32 – 00 – 011 / B ; Tenuta Sunshine Body Accessories Cabin Insulation2004
• 32 – 04 – 033 / G ; Vehicle Parts Cockpit 2005
• 32 - 07 - 522 / B; Interior Door Handles 2005
• 32 – 09 – 881 / C ; Interior Rear View Mirrors 2004
• 36-05-019 / E; Electrical Connections Connectors 1997
• 39 – 06 – 008 / C ; Flexible Tube Cooling Systems 2006
• 47 – 01 – 000 / C; Protection Against Environmental Corrosive Attacks Vehicle Mounted Metal Parts Assemblies 2007
• 47 – 03 – 005/C ; Paint Coatings Interior Plastic Parts 2006
• B15 4101 ; Coatings Electrolytic Zinc Deposits Associated Finishing 2001
• B15 4140 ; Coatings Electrolytic Chrome Plating on Plastic Parts ” 2003
• B15 5050; Paint Coatings Finished Vehicles 2004
• B20 0110; Product Consumables 2007
• B20 1410; Rubber Track Materials 1997
• B21 7050; Connectors 2004
• B21 7110; Environmental Characteristics of Electrical and Electronic Equipment Electrical Characteristics 2005
• B21 7130; Environmental Electrical Electronic Equipment Physical Chemical Properties 2001
• B21 7130 - part 1 ; Environmental Electrical Electronic Equipment Physical Chemical Properties 2003
• B21 7130 - part 2 ; Environmental Electrical Electronic Equipment Physical Chemical Properties 2003
• B22 7120 ; Stn Dry Air Filter 2005
• B22 7130; Stm Line Air Supply 2008
• B25 1140 ; Harness Harness Verification 2003
• B25 7110; headlights 2000
• B25 7205 ; Luminous Devices Signaling Illuminator Plates 1999
• B29 6120 ; Seals Mobile Panels 2004
• B32 7122 ; Online Air Intake Measurement Efficiency Water Precipitation 2007
• B32 7128 ; Online Air Intake Measurement Reset Reset 2005
• B62 0020 ; Materials Thermoplastics Thermoset Definitions Nelles Convention 1997
• B62 0030 ; Thermoplastic, Thermoset Materials, Thermoplastic Elastomers Rubbers – Properties – 2004
• B62 0030 ; Materials Thermoplastics, Thermoplastic Elastomers Rubbers Thermoset specification 2008
• B62 0100 ; Plastic Parts Functional Requirements 1997
• B62 0200 ; Special Material Requirements for Plastic Parts 2003
• B62 0300 ; Thermoplastic, Thermoset Materials Thermoplastic Elastomers Rubbers Classification 2005
• B63 4100 ; Rubber Compact Grade Mixed 4 1997
• B65 4251 ; Silencer Acoustic-Absorbers 2003
• B67 1010 ; Flexible Cellular Materials 1994
• B67 1016; Soft Alveolar Materials Category 2 1997
• B67 1511 ; Cellular Materials Polyurethane Seat Foam 1998
• D10 5517 ; Parts Passenger Chest Rating Intensity Scent Rating Descriptors Prohibitive 2005
• D14 1055; Organic Materials and Coatings Friction Wear 2004
• D14 1425; Corrosive Coating Parts Thread Friction Resistance Rotary Wear 1996
• D14 1428; Anti-Chip Products Plastics – Rubbers Resist Sandblasting 2002
• D15 1343; Color Materials Visual Comparison Colors A Bright Cabin 1997
• D15 5083/A ; Opaque Colored Products Color Point (Spectrocolorimetry) 1994
• D15 5319 ; Materials Coating Application A Pressure Washing 1997
• D15 5362; Materials Paint Coating Cracking Exfoliate Ment Standards ” 1997
• D15 5504; Paint Coatings Visual Color Comparison in Light Booth 2003
• D17 1058; Materials Coatings Salt Spray Test 5% Naci Methods Grading 1997
• D17 1058/H; Neutral Salt Spray Test 2004
• D17 1736 / B ; Paints Plastic Color Change Test Using Colorimeter 1997
• D17 2028 / C ; Corrosion Test with Auto Change Stages Salt Spray, Drying Humidity (Ecc1) 2007
• D21 3093 / – ; Products Related to Paints Applied on Hard Plastic Material Paint Coating Adhesion “Cross Scalpel” 2006
• D24 5359; Paint Coating Brushes Resistance Mechanical Washing 1996
• D25 1075 ; Paint Coatings Cross Hatch Test 2003
• D25 1413 ; In Těrovépovlaky Rubber Ea Plastics Me Romans Luster 1997
• D25 1413 / B ; Paint Coatings, Plastic Rubbers Gloss Measurement 1995
• D25 5001 ; Surface Coatings Evaluation Adhesion 2007
• D27 1327 ; Paint Coatings Resistant Immersion Water (Ford Tank) ” 1997
• D27 1389 /C-2003; Painters Plastic Rubber Artificial Aging A Weather-Ometer 2003
• D27 1389-1995; Coatings Paint, Rubbers Plastics Artificial Aging with Weatherometer 1995
• D27 1571 ; Paint Coatings Swelling from Moisture ” 1997
• D27 1911 / D ; Rubber Plastic Paint Coatings Artificial Aging Using Weatherometer 2007
• D27 5144 ; Paint Coating Similar Products -Painting 1997
• D27 5415 ; Resistance Coatings Paint Biological Attacks 1997
• D27 5439; Coatings Artificial Aging Ultraviolet Tle 1998
• D29 5162 ; Paints Coatings, Varnishes Similar Products Polishing 2002
• D40 5310; Plastic Qualitative Analysis (Infrared Spectrometry) 1997
• D41 1003 ; Flexible Material Cellular Resistance Compression” 1997
• D41 1048 ; Cellular Materials Flexible Semi-Rigid Tear Strength (Pants Type Test Sample) 1999
• D41 1050 ; Flexible Materials Alveolar Resist Traction Extension A Violation 1997
• D41 1099 ; Vulcanized Rubber Rubber Thermoplastic Drive 1997
• D41 1108 ; Adhesive Tension – Shear Strength (Washer Method) 1999
• D41 1299 ; Profiles Sealing Rubber Similar Materials – Compressibility Al'Ambiante Static Cold 1997
• D41 1427 ; Filling Casting Materials Alveolar Elasticity Static 1996
• D41 1483; Profiles Protection Stapling 1997
• D41 1541 ; Flexible Semi-Flexible Alveolar Materials Compressive Strength 1997
• D41 1560 ; Glass Panels Fixed Action Gaskets Non-Framing Finishing Retainers 1997
• D41 1705; Adhesives Sealants Shear Stress Creep Strength Under Moist Heat 1991
• D41 5149; Rubber Resistance Tear (Delft Test Tube) 1997
• D42 1047; Materials, Cellular Elastic Fatigue Fixed by Dynamic Compressive Deformation 1997
• D42 1235 ; Plastic Rubber Parts Behavior Shock (Method by Fall Mass) ” 2006
• D42 1235 / – B1995 ; Rubber Plastic Impact Resistance (Drop Weight Method) 1995
• D42 1235 / C-2004; Impact Behavior of Plastic Or Rubber Parts (Mass Reduction Method) 2004
• D42 1235-1996; Rubber Parts Plastic Behavior Effect (Method by Fall Mass) 1996
• D42 1775 / A ; Resistance Rating of Internal External Plastic Parts According to Abrasion 2001
• D44 1073; Friction Wear Lining Materials 2000
• D44 1900 / B-2001 ; Plastic Resistance Marking (Resistance Scoring by Polishing) 2001
• D44 1900 / C-2008; Plastics - Marking Resistance (Glare Resistance) 2008
• D45 1010 / G-1997 ; Polymer Material Parts Outside Passenger Compartment Color Fastness Friction 2007
• D45 1010-1997; Materials Parts Polymer Passenger Cabin Interior Nia Exterior Lost Their Color On Sta Galing 1997
• D45 1010-1999; Materials Parts Polymer Passenger Compartment Interior Exterior Color Fastness Friction 1999
• D45 1010-2006 ; Materials Parts Polymer Passenger Compartment Interior Exterior Color Fastness Friction 2006
• D45 1030 ; Loop Flexibility Plastic – Or Rubber – Coated Fabrics Fabrics – Plastic Sheet – Strap 1995
• D45 1045 ; Light Material Density (Density) 1997
• D45 1046 ; Flexible Cellular Materials Upholstery , Cover Skin Car Interior After Bottoming At A Constant Thickness Permanent Deformation Pressure 1997
• D45 1124; Elongation at Low Load in Textiles and Coated Textiles Sudden Residual Deformation After Unloading 2003
• D45 1132; Compact Rubbers Permanent Deformation After Compression with Constant Stress 1999
• D45 1139 ; Floor Materials Size Changes Appearance Changes Heat 2006
• D45 1234 ; Parts Containing Plastic Elements Reaction Heat Non-Radiant Dry Oven 2008
• D45 1300 ; Sealing Profiles Rubber-Like Materials – Volatile Compression After Constant Tension 1997
• D45 1333 / D2004 ; Passenger Compartment Interior Materials Horizontal Flammability 2004
• D45 1333 / E-2005 ; Materials in Passenger Compartment Horizontal Flammability 2005
• D45 1333 / F-2009 ; Cockpit Interior Materials Flammability Horizontal 2009
• D45 1333-2001 ; Materials Passenger Compartment Interior Horizontal Flammability 2001
• D45 1443; Composite Movable Panel Profiles Shear Creep Strength 1997
• D45 1444; Compounds and Parts Made of Rubber or Plastics in Continuous Contact with Fuels - Swelling 1997
• D45 1528 ; Vulcanized Rubber Plastic Soft Hardness Low Temperature Test According To Gehman 1997
• D45 1601-1997; Materials Passenger Compartment Volatile Additives Pass A Single Surface 1997
• D45 1601-2004; Ingredient Volatility Adjuvant On One Side 2004
• D45 1727; Upholstery Materials Passenger Compartment Parts Fogging – Condensation 2006
• D45 5014 ; Felt, Wadding, Polyurethane Foam Noise Factor Absorber (Method Standing Waves) 1997
• D45 5128 ; Soft Semi-rigid Foam Can Control Impact Resistance (Flexibility) 1998
• D45 5232 ; Equipment Tools Thermal Resistance (Non-Ultraviolet Artificial Radiation) 1997
• D45 5280 ; Vehicle Equipment Cartography Maximum Values ​​Warm Climate 1997
• D45 5430 ; Felt, Wadding, Polyurethane Foam Noise Factor Absorber Impedance Measurement Tube 1998
• D45 5523 ; Resistance Scratching (Sclerometer Test) 2004
• D45 5602 ; Flexibility Floor Coverings Softness Test Method 2005
• D47 1005 ; Textile Water Other Dyeing 2005
• D47 1020 ; Cladding Parts Cabin Resistance Tons Water, Seawater Sweat ” 2006
• D47 1025 ; Materials Parts Passenger Compartment Plastic Coated Textiles, Plastics, Hide Trim Color Fastness Perspiration 1999
• D47 1053; Air Aging Accelerator Rubber 1997
• D47 1098; Vulcanized rubbers and thermoplastic rubbers, compact or alveolar Aging in liquids and greases 1996
• D47 1100 ; Air Ozonated Air-Aging Rubbers 1996
• D47 1122 / D ; Flooring Materials Strength Artificial Light Shade Low Temperature 2000
• D47 1165-2005 ; Applied Products Body-In-White or Paint Coated Products, Plastics Accelerated Aging 2005
• D47 1165-2006 ; Wall Products On Box White Or Coated Paint, Plastic Accelerated Aging 2006
• D47 1217; Felts – Filler – Wood Fiber Behavior Humid Atmosphere Resistance Micro-Organisms 1999
• D47 1234 / A ; Parts Containing Plastic Components Dry Oven No Heat Behavior 2004
• D47 1279 / G ; Plastic Rubber Parts Resistance Body Operation Conditioning Treatment Products 2007
• D47 1309-1996; Material Components Automotive Equipment Aging According to a Defined Climate Cycle” 1996
• D47 1309-2007; Automotive Materials and Parts Weathering According to the 2007 Donnne Climate Cycle
• D47 1431; Materials Parts Passenger Compartment Appearance Behavior Artificial Light at High Temperatures Average 2006
• D47 1431/L ; Passenger Compartment Material Parts Color Fastness High Temperature Artificial Light ” 2000
• D47 1924/A ; Plastic Rubbers Occasional Contact Fluids Automobile 1997
• D47 5147; Flexible Honeycomb Material Behavior in Humid Heat 1997
• D47 5252; Materials Parts Passenger Behavior Appearance Artificial Light Low Temperature 2006
• D49 1672; Rubber Bonding Trend Glass Gaskets Mobile Panels 1997
• D49 3001 / B ; Injected Fragrances, Internal Equipment Parts Intensity Assessment Global Odor Characterization 2002
• D49 3046 / A ; Measurement of Odor Emissions, Interior Equipment Parts Density Characterization Odor from Parts Passenger Compartment Climate Chamber 2006
• D51 1485 ; Adhesives Peel at Right Angles ” 1997
• DMOV_CAR03_0001 ; General Standards Features Equipped Dashboard 2005
• R36 2101; Sembles Body Equipment Door Gasket 1997
• R37 0001; Body Set Equipment Trim Insono – Assisi Organic Materials 1997
• RJI ; Radial Compression Test Method
• ST 96,900,803,9A; Sto Vent A515 2006 Rover Res.22.Pl.08 Plastic Components - General 1991
• RES.22.PL.08 ; Plastic Components – General 1991
• ISO 1853; Conductivity Dispersive Rubbers, Vulcanized or Thermoplastic – Measuring Resistance ” 1998
• SAAB 1060 ; Test Method
• SAAB 1060 ; Test Method
• SAAB 1075 ; Test Method
• SAAB 1076 ; Test Method
• SAAB 1077 ; Test Method
• SAAB 1078 ; Test Method
• SAAB 1080 ; Test Method
• SAAB 211-1 ; Test Method
• SAAB 211-2 ; Test Method
• SAAB 232 ; Test Method
• SAAB 3159 ; Test Method
• SAAB 3770-HA ; Test method
• SAAB 3770-HR ; Test Method
• SAAB 3770-M; Test Method
• SAAB 3965 ; Test Method
• SAAB3967 ; Test Method
• SAAB 418 ; Test Method
• SAAB MoisAg; Test Method
• SAAB UV Aging ; Test Method
• SAAB1075 ; Test Method
• SAAB1076; Test Method
• SAAB1077; Test Method
• SAAB1080 ; Test Method
• SAAB205 ; Test Method
• SAAB220 ; Test Method
• SAAB222; Test Method
• SAAB232 ; Test Method
• SAAB3770-HA ; Test method
• SAAB3770-HR ; Test Method
• SAAB3770-M; Test Method
• SAAB418 ; Test Method
• SaabMoisAg; Test Method
• STD1077; Termination Friction Detection Garbage Detection Fastness Friction 1994
• STD1082 ; Net Test Fogging Fogging 1994
• STD19; Marking of Parts Marking of Goods Marking of Parts 2001
• STD 208 ; Acoustic Absorption efficient. Coefficient Acoustic Absorption 1973
• STD 220 ; Thickness Measurement Tjockleksmätning Thickness Measurement 1994
• STD 223; Rubber - Resistance Ozone Cracking - Static Load Test Rubber - Determination of Cracking in Ozone - Static Tensile Rubber Test - Resistance Ozone Cracking - Static Strain Test 1988
• STD2241 ; Resistance Humidity Fukthärdigkeit Resistance Humidity 1998
• STD232 ; flammability 2002
• STD247 ; Soft Rubber Products 1998
• STD3098 ; Determination of Compression Module. Tyre. 1988
• STD3099; Rubber Stud Flexibility. Recoil flexibility. Tyre. 1988
• STD 3100 ; Shear Module Determination Bones. Tyre. 1988
• STD3159 ; UV Resistance, Xenon Lamp 1999
• STD 3304 ; Resistance Segregation 2001
• STD340 ; General Test Inspection Regulations 2001
• STD3907 ; Weather Test Cycling Climate 1999
• STD501 ; Resistance Chemicals 1996
• STD5071 ; Prohibited Reportable Substances Restricted Reportable Substance 1999
• STD 518065 ; Rubber 8065, Ethylene Propylene (Epdm) 2002
• STD 518066 ; Rubber 8066 Radiator Hose, Ethylene Propylene (Epdm) 1997
• STD917 ; Determination Hardness. Rubber 1981
• STD 918 ; Determination of Tensile Properties Rubber 1975
• STD919 ; Fixing Tear Strength Rubber 2001
• STD920 ; Detection Compression Set. Rubber 1981
• STD922 ; Determination Elongation, Creep Tension Set. Tyre. 2001
• STD 923 ; Determination of Contacts and Migration Stain on Organic Surfaces. Rubber 1975
• STD 924 ; Determination of Resistance Fluids. Rubber 2002
• STD 927 ; Accelerated aging. Rubber 1975
• STD 928 ; Determination of Post-Freezing Withdrawal Temperature. Rubber 1975
• SAE J1326; (R) Test Method for Measuring Wet Color Transfer Properties
• SAE J1351 ; Odor Analysis
• SAE J1352; Compression Recovery Insulation Fills
• SAE J1355; Test Method Measuring Thickness Flexible Insulation Fillers Recommended Practice
• SAE J1389; Corrosion Test Insulation Materials
• SAE J1523; Metal Metal Overlap Shear Strength Test Automotive Type Adhesives
• SAE J1525; Lap Shear Test Automotive Type Adhesives Fiber Reinforced Plastic (Frp) Bonding
• SAE J1530; Wear resistance
• SAE J1545; Instrumental Color Difference Measurement Exterior Coatings , Textile Color Trim
• SAE J1553; Cross Peel Test Automotive Type Adhesives Fiber Reinforced Plastic (Frp) Bonding
• SAE J1600 ; Method of Evaluation of Adhesion Properties Automotive Sealants (Cancelled in January 2001)
• SAE J1717; Interior Automotive Plastic Part Test (Valid November 2007)
• SAE J1756; Determination of Fogging Properties Interior Automotive Materials
• SAE J1847; Wear Resistance Test-Vehicle Exterior Graphics Pin Striping
• SAE J1885; Color fastness Light
• SAE J1907; Peel Adhesion Test Glass Elastomeric Material Automotive Glass Encapsulation
• SAE J1960; Color Fastness Light [1140 Kj]
• SAE J200 ; Tear Strength
• SAE J2016; Chemical Stress Resistance Polymers (Cancelled Feb 2008, Replaces Iso 11403-3)
• SAE J2020 ; Accelerated Exposure Automotive Exterior Materials Using A Fluorescent Uv Condensing Apparatus
• SAE J2212; Color fastness Light
• SAE J2412 ; Accelerated Exposure Automotive Interior Trim Components Using A Controlled Radiation Xenon-Arc Apparatus
• SAE J2527; Performance Based Standard Accelerated Exposure Automotive Exterior Materials Using Controlled Radiation Xenon-Arc Apparatus
• SAE J315; Chipboard Test Procedure
• SAE J322; Test Method for Determination of Painting Resistance of Non-Metallic Flooring Materials Hydrogen Sulfide Gas
• SAE J323(Method A); Test Method for Determination of Cold Cracking Flexible Plastic Materials
• SAE J365; Method Testing Resistance Friction Trim Materials
• SAE J369; Flammability Polymeric Ingredient Horizontal Test Method
• SAE J400 ; Test Chip Resistance Surface Coatings
• SAE J681 ; Colorfastness Friction
• SAE J855; Test Method Stretch Set Textile Plastics
• SAE J860 ; Test Method Mass (Weight) Measurement Organic Trim Materials
• SAE J861; Method Testing Resistance Cracking Organic Flooring Materials
• SAE J883 ; Test Method for Determination of Dimensional Stability Automotive Textile Materials
• SAE J912; Test Method Determination of Blocking Resistance Related Properties Automotive Trim Materials
• SAE J913 ; Test Method Roving Automotive Fabrics Fibrous Materials
• SAE J948; Test Method Determination of Abrasion Resistance Automotive Bodycloth, Vinyl, Leather, Snagging Automotive Bodycloth
• SAE J949; Test Method Surfaces for Determining the Hardness of Interior Flooring Materials by Three-Point Bending Test
• STD 41622; Rubber - Refrigerant Hose for Pressure Up to 2,5 Bar Rubber - Refrigerant Hose Pressure Up to 2,5 Bar 2006
• TB1444 ; Soft Feel Painted Surfaces 1996
• TB 1444 Appendix A ; Scratch Resistance 1996
• TB 1444 Appendix B ; Color Fastness Respect Change Color 1996
• 1-100208801 AC ; Filling Hose 2005
• 1-100217701 AA; Vent Hose 2004
• L 350/43 ; Technical Data Test Vehicles Equipped with Positive Ignition Engines to Use Reference Fuel 1998
• L 350/44 ; Technical Data Diesel Engine Test Vehicles Using Reference Fuel 1998
• L 350/45 ; Technical Data Reference Fuel Test Vehicles Equipped with Positive Ignition Engines at Low Ambient Temperature Type Vi Test 1998
• SES N 2402 ; Restriction of Use of Environmental Impact Substances (Response Eu Elv Directive Voluntary Action of Jama) 2006
• SES N 2403 ; Standard Control Volatile Organic Compounds Emissions 2004
• SES N 3211b ; Polypropylene Molding Material 2001
• SES N 3241; Test Methods Scratch Resistance Plastic Parts Evaluation Criteria 2002
• SES N 3243; Quality Paint on Plastic Parts 2002
• SES N 3245 ; Test Method Flame Resistant Ingredient Criteria Flame Resistant Property 2001
• SES N 3291a ; A Method for Testing Plastic Materials 2001
• SES N 3292; Resistance Test Methods Plastic Parts Weathering Light Stabilizers 2000
• SES N 3293; Durability Evaluation Criteria Plastic Parts Weathering Light Stabilizers 2002
• STD 09355-11188-S ; Hose 2000
• STD 89241-73HX0-S ; Filling Hose 0
• 01208-00415; Spec. Heel Pad 2002
• PPS 1001 ; Corrosion Resistance
• PPS 1012 ; Odor Evaluation
• PPS 1012 ; Odor Evaluation
• BES 2004 ; heat resistance
• BES 2004 ; Variable Surface Temperature Heat Test
• BES 2014 ; Weathering General
• PPS 2014 F ; Accelerated Air Resistance
• PPS 2023 ; Resistance Painting
• PPS 2023 ; fogging
• PPS 2025 ; Resistance Painting
• PPS 3016 ; Endurance Cycle Test
• PPS 3026 ; Fastener Hold Test
• PPS 3063 ; Grommet Pulling Force
• PPS 4002 ; Paint Adhesion Test
• PPS 4003 ; Paint Flexibility Test
• PPS4010 ; Paint Thickness Test
• PPS4011 ; Paint Hardness Test
• PPS4012 ; Taber Resistance [&Lt 5.000 Cycles]
• PPS4012 ; Taber Resistance (<5.000 Cycles)
• PPS4013 ; Pressure Resistance
• PPS4014; Taber Wear
• PPS4014; Taber Wear
• PPS4015 ; speed of light
• PPS4015 ; Color fastness Water
• PPS 5001 ; Tensile Strength and Amperage Elongation Aging / Conditioning
• PPS 5001 ; Tensile Strength and Elongation
• PPS 5003 ; Tear Strength
• PPS 5003 ; Tear Strength
• PPS 5004 ; Textile Flex Resistance
• PPS 5006 ; Tuft Lock prerequisite
• PPS 5006 ; pinch lock
• PPS5007 ; Rubber Hardness
• PPS5010 ; flammability
• PPS5010 ; flammability
• PPS5011 ; Mat Bend Test
• PPS5011 ; Mat Bend Test
• PPS5017 ; water penetration
• PPS5017 ; water penetration
• PPS5018 ; Adhesion Flexible Surface
• PPS5018 ; Rubber Properties Adhesion Surface
• PPS 6006 ; Method A Rotation Drag Test
• PPS 6006 ; Method A Rotation Drag Test
• PPS 6006 Method A ; Forward Backward Drag Test Method
• PR380 2.2.5 ; Adhesion Force
• TIS 01202-00C36-A; Peel Strength Adhesion Type Counterweight
• TIS 01204-00232 ; Volatile Organic Compounds (Vocs)
• TIS T0321E ; Corrosion Resistance Paint Film
• TM 3437 00 ; Adding Polyurethane Shaumkunstleder Fabric 1992
• TM 604800 ; Polyurethane Foam Molded Parts 0
• TM 949100 ; Composite Molded Form Heaven, Support Pur Foam Compression Molded Composite Material Formed Ceiling Tiles, Surfaces Made of Polyurethane Foam 2003
• Toyota Procedure; Yellow Discoloration 4.13
• Toyota TSL 3600G Section 7.15 (A) and (B) ; Color fastness Light
• TOYOTA TSL3600G-1 ; Carpet Materials Battery
• TS 60695-11-4 50W; Flame Test
• TS M5515G ; Polyacetal Resin Molding Materials Performance Test
• TSB5501G ; Water Rubber Hoses 2005
• TSC 3005G ; Ultraviolet Ray Distortion Test
• TSD 5613G_0_H-1; holding power
• TSD5615G ; Resin Wheel Cover Performance Evaluation
• TSE 7151G; Standard Parts Rubber Hoses Low Pressure Fuel Line 2008
• TSE 7154G ; Standard Parts Fuel Vapor Hoses 2004
• TSE 7159G; Test Method Material Properties Rubber Hoses Fuel Line System 2007
• TSF7350G ; Test Method Material Properties Reports Plastic Boards 2000
• TSF 7762G ; Test Method for Material Properties Roofings 2004
• TSG 7101G ; Copper Copper Alloy Rod, Rod Wire 2003
• TSH 1108G; Phosphate Film Conditions
• TSH1508G ; Test Method Volatile Solvent Resistant Paint Film 2000
• TSH1518G ; Test Method Color Measurement Paint Film 1996
• TSH1519G ; Test Method Gloss Paint Film 1995
• TSH1520G ; Test Method Light Transmittance Paint Film 0
• TSH 1552G ; Salt Spray
• TSH1553G ; Chip Resistant Paint Films
• TSH1554G ; Filiform Corrosion Resistance (Toyota Arrow Chip Test)
• TSH1555G ; Accelerated Corrosion Under Complex Environment
• TSH1564G ; Fogging Test Method Interior Paint 2002
• TSH1582G ; Carbon Arc Lamp Type Test Methods Accelerated Weathering Resistance Paint Film 1995
• TSH1585G ; Xenon -Arc Lamp Type Test Methods Accelerated Weathering Resistance Paint Film 2005
• TSH 2354G ; Cathodic Electrodeposition Film
• TSH 3130G ; Quality Paint Internal Parts 2005
• TSH3131G ; Quality Coating Exterior Part 2001
• TSH3711G ; Coated Polypropylene Bumpers 1996
• TSH 6504G ; Electroplated Chrome Plates Decoration
• TSH6528G ; Electrolysis Zinc-Iron Alloy Coating (Hexavalent Chromium Free)
• TSH7600G ; Anodized Oxidation Coatings Aluminum (For Decoration)
• TSK 5705G ; Pressure Sensitive Adhesive Double Sided Tape Outdoor 1997
• TSL 0601G ; Test Method Color Change with Aging
• TSL 3505G ; Muffler Pad Material 2003
• TSL 3600G TOYOTA Section 7.15 [A] and [B] ; Color fastness Light
• TSL 3604G ; Mat Materials Luggage Compartment 2001
• TSL3616G ; Polyurethane Mat Molded Ceiling Cover 2002
• TSL 5100G ; General Test Methods Vinyl Leathers 2002
• TSL 5500G ; Plasticized Polyvinyl Chloride Sheets 2002
• TSM 0500G ; Flammability Test Method Indoor Non-Metallic Materials
• TSM 0501G ; Standard Test Method Plastic Molding Materials
• TSM 0503G ; Fogging Test Method Non-Metallic Materials
• TSM 0500G ; Method Test Fire Indoor Metallic Materials 2000
• TSM 0501G ; Standard Test Methods for Plastic Molding Materials 2003
• TSM 0502G ; General Test Method for Material Properties Plastic Parts 2006
• TSM 0503G ; Fogging Test Method Non-Metallic Materials 1997
• TSM 0505G ; Odor Test According to Tsm 0505G 0
• TSM 0505G-1 ; Criteria Odor Non-Metallic Materials 2000
• TSM 0506G ; Standard Test Methods Plastic Mold Material Compliance ISO 2005
• TSM 0509G ; Test Method Measuring Volatile Substances Under Heat Desorption Method 2005
• TSM1651G ; Material Specifications Fuel Vapor Hoses 2004
• TSM5514G ; Polypropylene Resin Molding Materials 2005
• TSM5608G ; Super Olefin Polymer Molding Materials (Tsop) 2005
• TSM5708G ; Elastomet Modified Polypropylene Resin Molding Materials Buffers 0
• TSM5725G ; Polypropylene Foam Resin Molding Materials Shock Energy Absorber 2004
• TSM5746G ; Thermoplastic Elastomer Materials Molding Outdoor Use 2001
• TSM 7102G ; Recessed Formwork Materials 1996
• TSR 7102G ; Test Methods Functional Glasses 2005
• TSR 7506G ; Glass Lead-Free Black Ceramic Coating 2004
• TSZ 0001G ; Control Method Sunstances Environmental Concern 2007
• TSZ 6001G ; Marks Genuine Parts 1998
• TSZ 6005G ; Indication Method Material Marking Plastic Parts Rubber Parts 2008
• UL 94 (excluding Part 10); Flammability Tests Plastic Materials Parts Devices Tools
• VDA 232-101 ; Global Automotive Declarable Substance List 2005
• VDA 237-101 ; Test Methods Foil Artificial Leather 1996
• VDA 270 ; Finishing Fragrance Properties Trim Materials Motor Vehicles 1992
• VDA 270 ; Rot Resistance
• VDA 270 C3; Smell Test
• VDA 275; Determination of Molds in Vehicle Interiors Method of Measuring Formaldehyde Release According to Modofizierten Flask Method 1994
• VDA 277; Non-Metallic Materials Vehicle Interiors Determination of Emissions Organic Compounds 0
• VDA 278; Thermodesorption Organic Emissions Characterizing Non-Metallic Automotive Materials 2002
• VDA 621-408 ; Testing Color Change of Paints with Simulated Ölrußeinwirkung 1978
• VDA 621-412; Resistance Painting Motor Vehicles Chemicals 0
• VDA 621-421; Automotive Coatings Condensation Climates 1985
• VDA 675 116 ; Elastomeric Components Cooling Properties Motor Vehicles Test Methods Determination of Differential Code Scanning | Calorimetry (Dsc) 1992
• VDA 675 218 ; Elastomer Structural Elements Motor Vehicles Determination of Flow Properties Test Procedure Shrinkage Plastic Elastic Deformation 1992
• VDA 675-205 ; Elastomer Components Motor Vehicles Test Method Determination Characteristics Stress-Strain Behavior Tensile 1992
• VDA 675-218; Elastomer Components Motor Vehicles Test Method Determination Characteristics Creep Relaxation Plastic Elastic Deformation 1992
• VDA 675-310 ; Elastomer Components Motor Vehicles Test Method Resistance Test Thermal Aging 1992
• VDA 75202 ; Materials Used Motor Vehicle Interior Tests Color Fastness Aging Behavior Light at High Temperatures Xenon Arc Light 2001
• MBN LV 123 ; Electrical Properties Electrical Safety High Voltage Components Road Vehicles-Requirement Tests
• MBN LV-124 ; Electrical Electronic Components Motor Vehicles Up to 3,5T-General Requirements, Test Conditions Tests
• MBN LV-148 ; Electrical Electronic Components Vehicle 48V-Vehicle Electrical System Requirement Tests
• (DIN 53479) DIN EN ISO 1183-1; Intensity
• ASTM E1252-98 (2013); Material is Ft
• DIN 53491 ; High Temperature Behavior
• DIN 53497 ; Low Temperature Behavior
• DIN 53505 ; Hardness Test (Shore D)
• DIN EN ISO 1133-A, ; Code T Melt Mass Flow Rate
• DIN EN ISO 1172; Mineral content
• DIN EN ISO 178; bending strength
• DIN EN ISO 179-1/1eA; Din En Iso 179-1 Notched Impact Resistance /Charpy Impact Resistance
• DIN EN ISO 179-1 / 1eU; Din En Iso 179-1 Impact Strength without Notch / (Charpy) Impact Strength
• DIN EN ISO 2039-1; Ball Indentation Hardness
• DIN EN ISO 306/ A50 or B50 ; Vicat Softening Temperature/ Dimensional Stability
• DIN EN ISO 307; Viscosity Number  Aging Resistance
• DIN EN ISO 527-1; break the stress
• DIN EN ISO 527-2; Yield Stress, Tensile Strength
• DIN EN ISO 6270-2; Condensed Water Constant Climate  Corrosion Cycle
• DIN EN ISO 7253; Chapter 8.5 Scribe  Hydrolysis Aging
• EP 84 610.21; Long Load Armrest Continuous load of armrest 2006
• ISO 11357 / DSC ; Method (Substituted ISO 3146) Melting Temperature
• LAH .5E0.867.B; Permanent Exposure Armrest 2006
• LAH .5E0.867.B – SK371, SK372 56 ; Interior Trim Door Panels 2009
• LAH .5E0.867.B – SK371, SK372 57 ; Interior Trim Door Panels 2009
• LAH .5E0.867.B – SK371, SK372 58 ; Interior Trim Door Panels 2009
• LAH .5E0.867.B – SK371, SK372 59 ; Interior Trim Door Panels 2009
• LAH .5E0.867.B-1; Fill Front Door (Appendix 1) 2009
• LAH .5E0.867.B-10; Fill Front Door (Appendix 1) 2009
• LAH .5E0.867.B-11; Fill Front Door (Appendix 1) 2009
• LAH .5E0.867.B -12; Fill Front Door (Appendix 1) 2009
• LAH .5E0.867.B-13; Fill Front Door (Appendix 1) 2009
• LAH .5E0.867.B -14; Fill Front Door (Appendix 1) 2009
• LAH .5E0.867.B -2 ; Fill Front Door (Appendix 1) 2009
• LAH .5E0.867.B-3; Fill Front Door (Appendix 1) 2009
• LAH .5E0.867.B-4; Fill Front Door (Annex .1) 2009
• LAH .5E0.867.B -5; Fill Front Door (Appendix 1) 2009
• LAH .5E0.867.B-6; Fill Front Door (Appendix 1) 2009
• LAH .5E0.867.B -7; Fill Front Door (Appendix 1) 2009
• LAH .5E0.867.B-8; Fill Front Door (Appendix No.1) 2009
• LAH .5E0.867.B -9; Fill Front Door (Appendix 1) 2009
• LAH 1K0 881 EE ; Test Specification Panels, Cover, Drawer Storage Compartment 2003
• LAH 3T5.809 ; Module Cover Fuel Tank El. 2005 Unpaid
• PV 1015; Contact corrosion through light metals and elastomers and plastic coupling 2002
• PV1200 ; Vehicle Parts Test Endurance Environmental Cycle Test (+ 80 / -40) ° C. 2004
• PV1211 ; Climate Tests Trim Parts 1995
• PV 1213 ; Surface Paint, Varnishes Resist Impact Stone (Vda Method) 1994
• PV 1217 ; Test Evaluation Paint Adhesion After Morainik Chip Bombardment Exterior Plastic Parts 0
• PV 1303 ; Non-Metallic Materials Testing Exposure Components In-Vehicle 2001
• PV 1305 ; Plastic Films 2002
• PV 1306 ; Stickiness
• PV 1502 ; Varnish 2 Layer Metallic-Paint Test Resistance to Cracking, 1996
• PV 1503 ; Testing of Coating Metallic Non-Metallic Materials A Vapor Stream 2003
• PV 2005 ; Vehicle Parts Test Resistance Environmental Cycle Test 2000
• PV 2034 ; Non-Metallic Sheet Coil Peel Test 1998
• PV 2037 ; Plastic Parts, Metal-Nonmetal Bonds Resistance Protectors Cleaning Agents 1999
• PV 3.14.4 ; Paints Varnishes Mobil Stone Chip Resistance Body Topcoats 2003
• PV 3.14.7 ; Determination of Paints Varnishes Stone Impact Resistance Harmony Din 55996-1 2003
• PV 3.2.4 ; Paints Varnishes Din 67 530 Specular Determination After 2001
• PV 3.3.3 ; Paints Varnishes Scratch Resistance Test Varnishes 2001
• PV3015 ; Interior Designation of Non-Metallic Materials Condensable Components (G) 1994
• PV 3303 ; Elastomer Gaskets Compression Profile Compression Pressure, Permanent Deformation 1998
• PV 3304 ; Fuel Hoses Low Temperature Resistance Diffusion Strength Test 1996
• PV 3305 ; Rubber Vulcanization Test Ozone Resistance Compression Kit 2003
• PV 3307; Sign Components from Elastomers, Plastic Elastic Formability 2004 Sk
• PV 3314 ; Edge Protection Hose Gasket Material Test 1999
• PV 3323 ; Test Cups for Aging Standard Samples Sample Holders 2000
• PV 3339 ; Refrigerant Hoses Deposited 1998
• PV 3341; Non-Metallic Materials, In-Vehicle Detection Emissions Organic Compounds 1995
• PV 3353 ; Vehicle Interior Floor Surfaces Contamination Cleaning Behavior 2004
• PV 3356 ; Soil Removal Behavior in Upholstery Fabrics 2002
• PV 3357 ; Insulating Material Behavior During Ignition With A Small Burner Surfaces Edge Exposure 2000
• PV 3363 ; Elastomer Gaskets Permanent Deformation Test 2005
• PV 3364 ; Elastomer Gaskets Inspection Pressing Force 2005
• PV 3370 ; Automatic, Manual Special Needs Inspection on Restschumtz or Interior Cleaning 2006
• PV3410 ; Pur Soft Foam 2000
• PV 3422 ; Body Seals Characteristic Permanent Deformation 2006
• PV 3900 ; Components Vehicle Interior Odor Test ” 2000
• PV3903 ; Measurement of Non-Metallic Flat Parts Flexural Strength 1999
• PV3904; Low Temperature Aging
• PV3905 ; Organic Materials Drop Ball Test 1990
• PV3906; Non-Metallic Surface Pattern Test Behavioral Wear 1998
• PV3907; Textile Brush Wear Test 1999
• PV3908 ; Textiles, Carpets Abrasion Resistance 2006
• PV3909 ; Non-Metallic Sheet Measurement Static Permanent Elongation 1997
• PV3919 ; Determination of Nonwoven Damping Compressive Strength 2004
• PV3920; Non metal. Identify Werstoffe Interior Foggingwertes (F) 1991
• PV3924 ; Sound Absorber, Reinforcement, Roof Buckling Strength 1997
• PV3925; Polymeric Materials to Measure Formaldehyde Emission 1994
• PV3927 ; Thermogravimetry Determination of Plastics Elastomers Plasticizers, Carbon Black 1992
• PV3929; Non-Metallic Materials Air Aging Dry-Hot Climate 1993
• PV3930 ; Non-Metallic Materials Affect Climate Humid-Hot Climate 1994
• PV3932 ; Plastic Parts Flocked Abrasion Resistance 2006
• PV3934 ; Floor Abrasion Test A Paragraph 2004
• PV3935 ; Plastic Elastomers Pyrolytic Gas Chromatography/Mass Spectrometry 1998
• PV3937; Amine Emissions from Mecca Polyurethane Foam Indication Method 2004
• PV3942 ; Elimination of Organic Emissions from Components Passenger Compartment Motor Vehicles Emissions Test 2000
• PV3952 ; Plastic Internal Components Scratch Resistance 2002 Test
• PV3964 ; Surfaces In-Vehicle Strength Test Cream ” 2006
• PV3966; Stress Bleaching Section 5.6 Low Temperature Behavior  Color Analysis
• PV3964 ; Cream Resistance
• TL ASA + PA6 ; Polymerblend 2007
• 1010 TL ; Materials Interior Equipment Combustion Properties, Material Requirements 2008
• 1011 TL ; Testing Flammability Plastics 1993
• 207 TL ; Reflective Coatings 2002
• 211 TL ; Painting Exterior Plastic Parts 2003
• 212 TL; Oxide Coatings on Aluminum Parts 2006
• 217 TL ; Zinc Coatings 2002
• 218 TL ; Multilayer Painted Body Color on Metal Outer Ball Body 2002
• 226 TL ; Vehicle Interior Material Finishing 1998
• 227 TL ; Painting of Galvanized Metal Surfaces 2004
• 244 TL ; Alloy Coatings Zinc / Nickel 2007
• 245 TL ; Non-Electrolytic Applied Zinc Flake Coatings 2007
• 256 TL ; Powder Coated Metal Surfaces 2004
• 428 TL ; Polyester webbing 1997
• 496 TL ; Zsb Door / Side Trim 2003
• 496 TL - 1st page; Zsb Door / Side Trim 2003
• 496 TL - page 2; Zsb Door / Side Trim 2003
• 496 TL - page 3; Zsb Door / Side Trim 2003
• 496 TL - page 4; Zsb Door / Side Trim 2003
• 496 TL - page 5; Zsb Door / Side Trim 2003
• 496 TL - page 6; Zsb Door / Side Trim 2003
• 496 TL - page 7; Zsb Door / Side Trim 2003
• 504/1 TL; Thermoforming Film Foam Parts 1998
• 52 625 TL ; Mounting Bracket 2008
• 520 TL 18 ; Foam Tape, Double-Sided Adhesive 1996
• 520 35 TL ; Pp / Epdm / Pe Blend Polymers, Finished Parts 2005
• 520 TL 38 ; Self Adhesive Labels Self Adhesive, Material Requirements 2009
• 520 TL 45 ; Pur Integrated Foam Steering Wheel Cover 2006
• 520 TL 52 ; Eco/Co Molded Parts 2003
• 520 TL 58 ; Mirror Base Plate Bond 2003
• 520 61 TL ; Foam Coated Fabrics 2005
• 520 62 TL; Pa66, Glass Fiber Reinforced, Finished Parts 2007
• TL 520 64 ; Skin 2002
• 520 65 TL; Elastomeric Mastic Cellular Rubber 2004
• 520 94 TL ; Trim Panel Load Compartment 2001
• 52062 TL; Pa66, Fiberglass Reinforced, Precast Elements 2009
• 521 07 TL; First start engine oil Sae 15W-40 1997
• 521 38 TL; Engine Gasoline-Super Unleaded 2003
• 521 64 TL ; Screen Washer 2004
• 521 73 TL; Start-Up Engine Oil Sae 0W-30 Ready-to-Use Engine Oil for Extended Oil Change Intervals with Fuel Economy Sae 0W-30 Fuel Economy Properties Extended Oil Change Intervals 1998
• 521 85 TL ; Reference Engine Oil Sae 5W-30 Test Compliance Elastomers 2006
• 522 03 TL; Polypropylene, Wood Powder Filled 2006
• 522 22 TL ; Soft Polyurethane Foam Backrest Car Seats 2000
• 522 26 TL ; Molded Ceiling Cover Set, Lightweight Types 2004
• 522 31 TL ; Polymer Blends Abs Pc 2004
• 522 77 TL; Pom, Impact Modified, Precast 2002
• 522 78 TL ; Rubber Floor Mat 1997
• 522 83 TL; Polypropylene, Elastomer Modified, Talc or Mineral Modified 2005
• 522 88 TL ; Polyamides, Mineral Reinforced, Finished Parts 2005
• 52296 TL ; Sets Dashboard (Protection) Knee 2008
• TL 523 11 ; Asa Graft Polymer 2006
• 523 16 TL ; Epdm Gasket, Water Cooler 2004
• 523 37 TL ; Damping Strut Roofs 1997
• 523 45 TL ; Technical Delivery Door Flat Strip Epdm Based Material Requirements 1991
• 523 61 TL; Refrigerant Hoses Aramid Reinforcement 2002
• 523 80 TL ; Pp, Glass Fiber Matte Reinforced, Precast 2002
• 523 88 TL ; Polypropylene Inner Lining 0
• 524 35 TL ; Fuel Line, Multilayer Pipe 2002
• 524 37 TL ; Polycarbonate Lenses 1994
• 524 40 TL ; Pa6, Reinforced Glass Fiber, Finished Parts 2002
• 524 47 TL ; Flocked Interior Upholstery Material 2006
• 524 48 TL ; Natural Fiber Molding, Thermoplastic Bonded 1998
• 524 50 TL ; Epdm Headlight Washing System Hoses 2000
• 524 51 TL ; Paint Decorative Metallic Attachments Outdoor 2003
• 524 52 TL; Polypropylene Increased Crystallinity 2003
• 524 75 TL ; Abs + Pa6 Polymer Blend 2004
• 524 76 TL ; Pom Finished Parts 2003
• 524 77 TL; PVC-Leather, Fabric Back, Reinforced 1998
• 524 96 TL ; Polyurethane Soft Foam Headrests 2000
• 526 TL ; Soft Pvc, Weather Resistant 2005
• 526 02 TL; Resistor Compression Stickiness 0
• TL 526 07 ; Comfort Pur Inserts 2005
• 526 22 TL ; Thermoplastic Elastomers Together Thermoplastic Hanes Exterior 2003
• 526 30 TL ; Side Profiles 2005
• 526 31 TL; Bumpers, Bumper Covers, Spoiler 2008
• 526 36 TL; Pom, Finished Parts (Not Passenger Compartment) 2007
• TL 526 37 ; Zsb Pillar Trim Scuff Plates 2004
• TL 526 41 ; Epdm Gasket Body 2005
• TL 526 49 ; Wheelhouse 2005
• TL 526 52 ; Asa PC Polymer Blends 2004
• 526 53 TL ; Pur Soft Foam Car Seats 2005
• 526 58 TL ; Plenum Chamber Cover 2005
• 526 63 TL ; Radiator Grille Car Integration Increases Material Needs 2006
• 527 TL; Abs graft polymer, finished parts 2002
• 528 TL ; Plastic Parts, Chrome 2006
• 529/2 TL; Pur, Resistant Hydrolysis, Precast 2002
• 533 TL ; Rigid Polyethylene 2004
• 533/1 TL; Polyethylene Hopper 2008
• 534 TL ; Polyamide 6, Precast 2000
• 591 TL ; Organic Eyeglass Lights 2003
• 681 TL ; Pvc Hose Fuel System 2002
• 745 TL ; Universal-Low Temperature Grease 2004
• 774 TL ; Ethylene Glycol Based Coolant Additive 2005
• TL 788 ; Diesel 2004
• 822 07 TL ; Quick Connect, Connect, Fuel Lines 1998
• 822 53 TL ; Fuel Line Assembly Connections 1998
• 823 86 TL ; Window Lift Systems 1997
• 909 TL ; Headlights Europe / America 2005
• TL211 ; paint coating
• 226 TL ; Thermal Conditioning
• VW 011 07 ; Arc Welding Bolts Sheet Metal Segments 2007
• VW 105 13 ; Audi Trademark 2007
• VW 137 50 ; Surface Protection Metal Parts 2005
• VW 2.8.1 ; Elastomers 2007
• VW 440 45 ; Polypropylene, Test Finished Parts 1986
• VW500 97 ; Porosity Metal Casting 2002
• VW 501 05 ; Upholstery Fabrics 2002
• VW 501 23 ; Thermoplastic Elastomers 2007
• VW 501 25 ; Polyamide 6, Finished Parts Car 2003
• VW 501 27 ; Polyamide 66, Finished Parts Passenger Compartment 2004
• VW 501 79 ; Emission Behavior Components In-Vehicle 2006
• VW 501 80 ; Signal Elements Interior Car Emission Characteristics 2000
• VW 501 81 ; Lightweight Transparent Glass Cover 2003
• VW 501 85 ; Vehicle Components Resistance Outdoor Weathering 2000
• VW501 90 ; Components Vehicle Interior Colorimetric Evaluation 2006
• VW 501 95 ; Colorimetric Evaluation Automotive Coatings 2002
• VW 801 01 ; Electrical Electronics Tools 2005
• VW 911 00 ; Standard Environmental Protection Vehicle Parts Tools, Material Equipment, 2007
• VW 911 01 ; Parts Tools, Materials, Operating Supplies 2004
• VW 911 04 ; Standard Environmental Protection Tool, 1998
• 31824225-004-01; Sign Prerequisites Dashboard Y283 / Y352 ” 2008
• ID method 85000006 ; Pilling Resistance 2001
• ID method 85000010 ; Resistant Dyeing, Resistant Contamination Cleanability Textile Upholstery 1999
• ID method 85042802 ; Resistance Stain Remover 1999
• Method 80000003 ; Contamination Resistant Plastic Components Ease of Cleaning 0
• Method 88100002 ; Abrasion Resistance Soft Hard Plastic Surfaces 0
• STD 1021, 5211; Test Panels, Enamel Paints. Sample panels, Paint and Varnish 2005
• STD 1024, 1531 ; Compressesstyvhet. Compressive Stress-Strain Properties 1995
• STD 1024, 2121; Tensile Strength 2006
• STD 1024, 3113 ; Scratch Resistance 1994
• STD 1024, 3115; Hardness 2006
• STD 1024, 3127; Hardness 1994
• STD 1024, 7122 ; Wear Resistance, Martindale 1994
• STD 1026, 1122; Heat Resistance 1994
• STD 1026, 5172; Finishing Color in Color Matching Cabinet 1994
• STD 1026, 8201; grayscale 1994
• STD 1026, 8202; Evaluating Grayscale Painting 1992
• STD 1026, 8231; Color Changes 1994
• STD 1026, 8242; Color Fastness Artificial Light Temperature 100 °C 1994
• STD 1026, 8243; Stability Daylight, 60°C 1994
• STD 1026, 8432; Color Fastness Rubbing, Rubber, Plastic Textiles Color Fastness When Rubbed, Rubber Plastics and Colored Textile Materials 2006
• STD 1027, 1375; corrosion resistance. Corrosion Resistance 1995
• STD 1027, 2711; fogging. Fogging 2006
• STD 1027, 2712; Anti-Odor Materials Vehicles Smell in Interior Materials Tools 2004
• STD 1027, 2713; Termination of Formaldehyde Emissions from Vehicle Interior Parts Determination of Formaldehyde Emissions from Details in Vehicle Interiors 2004
• STD 1027, 2714; Termination Organic Emissions from Non-Metallic Materials Vehicle Interiors Identification of Organic Emissions from Non-Metallic Materials in Vehicle Interiors 2007
• STD 1027, 2719; Cloud 2001
• STD 1027, 3231; Resistance Ozone. Ozonbeständighet 2006
• STD 1027, 6132; Test Liquids 1997
• STD 1212, 001; Plastic 91200, Amidplast ( Pa 6) Plastic 91200, Polyamide Plastic (Pa 6) 1997
• STD 420-0003 ; Test Method Fogging Organic Materials July 2006 (Iso 6452 2000) Ref Renault Standard D45 1727
• STD 423-0014; Accelerated Corrosion Test Accelerated Corrosion Test ”2009
• STD 5031, 1; Flammability Ingredient. Fire resistance Interior design material 2003
• TB 01282719-004-1 ; Cable Tray Cable Tray 1999
• TR 09170154-006-01; Outer Handle Side Door P2X 0
• TR 31803848-001-01; Exterior Chrome Holder Side Door Chrome Strip Trunk / Tailgate 2000
• TR 31809859-004-01; Cockpit P1X 2004
• TR 31812443-007-01 ; Instrument Panel P11 / P12 2008
• VCS 1024, 21119; Tensile strength. tensile strength 2005
• VCS 1026, 52729; The English Version is the Original Reference Case Dispute. Day English Version Is The Original Version And Will Also Be Cited. ”2005
• VCS 1027, 149; Accelerated Corrosion Test Accelerated Corrosion Test 2002
• VCS 1027, 2719; fogging. Fogging 2004
• VCS 1027, 2729; Deodorizing Materials Tools. Fragrance Ingredient I Fordon in 2004
• VCS 1027, 2739; Termination of Formaldehyde Emissions from Vehicle Interior Parts Determination of Formaldehyde Emissions from Details in Vehicle Interiors 2004
• VCS 1027, 2749; Termination Organic Emissions from Non-Metallic Materials Vehicle Interiors Determination of Organic Emissions from Non-Metallic Materials Vehicle Interiors 2004
• VCS 1027, 2759; Quantification Specific Volatile Organic Substances from Non-Metallic Materials Vehicle Interiors Measurement Characteristics Volatile Organic Substances from Non-Metallic Materials Vehicle Interior 2006
• VCS 1027, 359; Color Fastness to Artificial Light at 75 °C Color Fastness to Artificial Light at 75 °C 2005
• VCS 1029, 54739; Adhesion Adhesion 2005
• VCS 5031, 19; Flammability Ingredient. Fire resistance at Inredningsmaterial 2004
• VCS 5713, 1059; Test Presence of Leakable Nickel Detection of Leakable Nickel 2004
• Volvo 1024, 3113 ; Scratch Resistance – Organic Materials
• Volvo 1027, 2711 ; Fogging, Organic Materials (Modified by Std 420-0003)