TL Tests for Automotive

EUROLAB With its expert team and state-of-the-art laboratories, it offers reliable and unbiased results in automotive tests, as in all other tests.

Automakers have merged in the past, so there are many cases where these features are widely used by every automaker. In addition, LV 112 and LV 214 standards for electrical connectors are being developed with the joint participation of automobile manufacturers such as Audi, BMW, Daimler, Porsche and Volkswagen.

Therefore, Daimler, Benz, Chrysler, Volkswagen, Renault, Nissan etc. Please check the standard number regardless of the name of the finished vehicle manufacturer, such as Among these features, the name of the finished vehicle does not matter.

• 471-7.3.2 TL; Salt Spray
• 52057 TL (4.8.2) ; Lubricant Film Coating Requirements – Heat Aging
• 52057 TL (4.8.3) ; Lubricant Film Coating - Requirements for Water
• 52057 TL (Section 4.8.1) ; Lubricant Film Coating Requirements - As Received
• 52057 TL (Section 2.4) ; Appearance
• 522-83 TL; Aging Resistance
• 52641 TL ; Flock Adhesion
• 52641 TL ; White Color Change Test After Aging in Water
• 82386 TL ; Environmental Simulation Temperature: (-50 to 150) ˚C, Relative Humidity: (10 to 98) %RH Ramp Rate: Maximum 10˚C/min to (-40 to 85)˚C Transfer Time: < 10 seconds Room Size : Up to 45.000 liters Solar Simulation: Solar Simulation (Metal Halide Lamp), Infrared Exposure, Surface Temperature up to 120˚C
• 82511 TL ; Environmental Simulation Temperature: (-50 to 150) ˚C, Relative Humidity: (10 to 98) %RH Ramp Rate: Maximum 10˚C/min to (-40 to 85)˚C Transfer Time: < 10 seconds Room Size : Up to 45.000 liters Solar Simulation: Solar Simulation (Metal Halide Lamp), Infrared Exposure, Surface Temperature up to 120˚C
• 82513 TL ; Environmental Simulation Temperature: (-50 to 150) ˚C, Relative Humidity: (10 to 98) %RH Ramp Rate: Maximum 10˚C/min to (-40 to 85)˚C Transfer Time: < 10 seconds Room Size : Up to 45.000 liters Solar Simulation: Solar Simulation (Metal Halide Lamp), Infrared Exposure, Surface Temperature up to 120˚C
• TL rock - StB; 04 - Annex B - Material composition
• TL Gestein – StB ; 04 – Frost Resistant (Table 19) – Material Composition
• 1010 TL ; flammability
• 226 TL ; cyclic corrosion
• TL52641, 5.2.5 ; Requirements for Combining Vulcanized Molded Parts and/or Bonded Joints