List of Major Test Standards for Auto Parts

EUROLAB With its expert team and state-of-the-art laboratories, it offers reliable and unbiased results in automotive tests, as in all other tests.

2A86-9178041 : X-Ray Fluorescent (XRF)
2A86-920334 : Element Determination by Combustion/Fusion (C, S)
2A86-9203705 : Glow Discharge Spectroscopy (GDS)
47 CFR FCC Part 15 : Subpart C (using ANSI C63.10 (2013) and Millimeter Wave Test Procedures DA 00-705); Transmitted and Spread
47 CFR FCC Part 15, Subpart B (using ANSI C63.4 (2014)): Transmitted and Emitted
47 CFR FCC Part 15, Subpart D (using ANSI C63.17 (2013)): Transmitted and Emitted
47 CFR FCC Part 15, Subpart E (using ANSI C63.10 (2013)): Transmitted and Emitted
47 CFR FCC Part 15, Subpart F (using ANSI C63.10 (2013)): Transmitted and Emitted
47 CFR FCC Part 18 (using FCC OST/MP-5 (1986)) : Transmitted and Emitted
AAMA 2603, 6.1, 6.2, 6.4, and 6.8 Voluntary Specification: Performance Requirements and Test Procedures for Pigmented Organic Coatings on Aluminum Extrusions and Panels
AAMA 2604,7.1, 7.2, 7.4 & 7.9 Voluntary Specification, : Performance Requirements and Test Procedures for High Performance Organic Coatings on Aluminum Extrusions and Panels
AAMA 2605,7.1, 7.2, 7.4 and 7.9 Voluntary Specification, : Performance Requirements and Test Procedures for Superior Performance Organic Coatings on Aluminum Extrusions and Panels
AAMA 312,5.0 : Performance Requirements for Laminating Wood and Cellulosic Composite Profiles
AAMA 613.7.11 Voluntary Specification, : Performance Requirements and Test Procedures for Organic Coatings on Plastic Profiles
AAMA 614,7.9 Voluntary Specification, : Performance Requirements and Test Procedures for High-Performance Organic Coatings on Plastic Profiles
AAMA 615,7.9 Voluntary Specification, : Performance Requirements and Test Procedures for Superior Performance Organic Coatings on Plastic Profiles
AAMA 623.6.11 Voluntary Specification, : Performance Requirements and Test Procedures for Organic Coatings on Fiber Reinforced Thermoset Profiles
AAMA 624,7.13 Voluntary Specification, : Performance Requirements and Test Procedures for High Performance Organic Coatings on Fiber Reinforced Thermoset Profiles
AAMA 625.7.13 Voluntary Specification, : Performance Requirements and Test Procedures for Superior Performance Organic Coatings on Fiber Reinforced Thermoset Profiles
AAMA 633,7.10 Voluntary Specification, : Performance Requirements and Test Procedures for Exterior Paints in Wood, Cellulosic Composites and Fiber Reinforced Thermoset Window and Door Components
AAMA 643,7.3.2 Voluntary Specification, : Performance Requirements and Test Procedures for Solar Reflective Coatings
AATCC : Evaluation Procedure 2 Gray Scale for Staining
AATCC – 001 : Gray Scale for Color Change, Procedure 1
AATCC – 001 : Gray Scale for Color Change
AATCC – 016 : Light Fastness
AATCC – 111 : Air Resistance, Procedures B and DS)
AATCC – 111 : Resistance to Weathering (Options A and B) Exposure (Part 10) Color Fastness (Section 11.1.3 only)
AATCC 169 (Cycles 1-4) : Weather Resistance of Textiles – Xenon Arc Exposure
AATCC 186 : Weather Resistance: Exposure to UV Light and Moisture
AATCC 192 : Weather Resistance of Textiles: Wet and Non-Wet Sunlight-Arc Lamp Exposure
AATCC EP-1 : Greg Scale for Color Change
AATCC Assessment : Procedure 2 Gray Scale for Staining
AATCC–001 : Gray Scale for Color Change AATCC (American Association of Textile Chemists and Colorists)
AATCC-016,6.3 : Light Fastness – Xenon-Arc
AATCC-169 : Weather Resistance of Textiles: Exposure to Xenon Lamp
ADT TP-14 : Sample Weight Measurements (0 - 200) g
ADT TP-18 : Sample Size Measurements (between 0,001 - 6,00)
ADT TP-19 : Oven Heat Test
AFG-01 : Adhesive for Bonding Plywood to Wooden Frame
ANSI C63.10 (2013) : Transmitted and Emitted
ANSI C63.26:2015 : Radio Communications
ANSI Z26.1 : Safety Glass Materials (Abrasion Resistance Only)
ANSI/AAMI/ISO 11607-2:2006 : Product Specification
ANSI/CRRCS100(Chapter,P.2.6) : Standard Test Methods for Determining the Radiative Properties of Materials
ARDL 8105 : Finite Element Analysis
ARDL 8106 : Finite Element Analysis Support Test
ARDL 8107 : Life Estimation of Elastomeric Components or Materials
ARDL 8111 : Shelf Life Estimation for Rubber Products
ARIB Standard STD-T66, Version 3.5 (2010): Radio Communications
ARIB Standard STD-T67, Version 1.3 (2007): Radio Communications
AS/NZS 2279.1 (2000): Harmonics
AS/NZS 2279.3 (1995): Tremor
AS/NZS 4268 (2003 + A1: 2005 + A2: 2006, 2008, 2012): Radio Communications
AS/NZS 4268 (2012+A1:2013) : Radiocommunication (Short Range Devices) Standard 2014, Radiocommunication (Short Range Devices) Amendment;Standard 2013 (No. 1), Radiocommunication (Short Range Devices) Amendment Standard (No 2) 2013 ;
AS/NZS 4280.1 (2003) : Radiocommunication (406 MHz Satellite Distress Beacons) Standard 2015, Part 1: Marine emergency positioning beacons (EPIRB) (IEC 61097-2:2002, MOD);
AS/NZS 4280.2 (2003) : Radiocommunication (406 MHz Satellite Distress Beacons) Standard 2014, Part 2: Personal location beacons (PLBs);
AS/NZS 4281 (2007): Radiocommunication (Wireless Telephone) Standard 2008, Radiocommunication requirements for cordless phones operating in the 1,7 MHz and 30 to 41 MHz frequency bands;
AS/NZS 4295 (2004) : Radiocommunication (Analogue Speech (Angle Modulated) Equipment) Standard 2014;
AS/NZS 4330 (2006): Radiocommunication (121.5 MHz and 243.0 MHz Emergency Position Indicator Radio Beacons) Standard 2014;
AS / NZS 4355 (1995): AS / NZS 4355: 2006, Radiocommunication (HF CB and Hand Telephone Equipment) Standard 2008;
AS / NZS 4365 (2002): AS / NZS 4365 (2011), Radiocommunication (UHF CB Radio Equipment) Standard 2011 (No.1);
AS/NZS 4367 (1996): AS/NZS 4367 (2007), Radiocommunication (Devices Used in the Coastal Cruise Radio Services Band) Standard 2008;
AS/NZS 4415.1 (2003): Radiocommunication (VHF Radiotelephone Equipment – Marine Mobile Service) Standard 2014, Part 1: Equipment on board and limited shore stations (including DSC) (IEC 61097-7:1996, MOD);
AS/NZS 415.2 (2003): Radiocommunication (VHF Radiotelephone Equipment – Marine Mobile Service) Standard 2014, Part 2: Major shore stations, limited shore stations, ship stations and hand stations (non-DSC) (ETS 300 162:1998, MOD) ;
AS / NZS 4582 (2004): Radiocommunication (MF and HF Radiotelephone Equipment - International Maritime Mobile Service) Standard 2014;
AS / NZS 4583 (1999): AS / NZS 4583 (2010) + A1, Radiocommunication (118 MHz - 137 MHz Amplitude Modulated Equipment - Aviation Radio Service) Standard 2012;
AS/NZS 4768.1 (2006): AS/NZS 4768.2 (2003); Radio Communication
AS/NZS 4769.1 (2000): Radiocommunication (Call Service Equipment) Standard 2014, Part 1: Angle modulated equipment;
AS/NZS 4769.2 (2000): Radiocommunication (Call Service Equipment) Standard 2002, Part 2: Amplitude modulated equipment;
AS/NZS 4770 (2000): Radiocommunication (MF and HF equipment – Ground Mobile Service) Standard 2003 and 2014;
AS/NZS 60598.1 (2013): LITE
AS/NZS 60598.2.1 (2014): LITE
AS/NZS 60598.2.17 (2006): LITE
AS/NZS 60598.2.20 (2002): LITE
AS/NZS 60598.2.4 (2005): LITE
AS/NZS 60598.2.6 (1998): LITE
AS/NZS 61000.6.3 : General and Product Specific Standards
AS/NZS 61000.6.3 (2012) : Transmitted and Radiated
AS/NZS 61000.6.4 : General and Product Specific Standards
AS/NZS 61000-3-11: Tremor
AS / NZS 61000-3-2 (2013): Harmonics
AS/NZS 61000-3-3 (2012): Tremor
AS/NZS CISPR 11 : Radiated and Conducted Emissions (1m semi-anechoic chamber up to 3 GHz)
AS/NZS CISPR 11 (2011) : Transmitted and Radiated
AS/NZS CISPR 11 (2015): Transmitted and Emitted
AS/NZS CISPR 13 : Radiated and Conducted Emissions (1m semi-anechoic chamber up to 3 GHz)
AS/NZS CISPR 13 (2009+A1:2015)(auxiliary equipment only): Transmitted and Radiated
AS/NZS CISPR 13 (2012) : Transmitted and Radiated
AS/NZS CISPR 14-1 : Radiated and Conducted Emissions (1m semi anechoic chamber up to 3 GHz)
AS/NZS CISPR 14-1 (2005, 2009, 2011+A2:2011) : Transmitted and Emitted
AS/NZS CISPR 14-1 (2010, 2013): Transmitted and Emitted
AS/NZS CISPR 14-2 : Radiated and Conducted Emissions (1m semi anechoic chamber up to 3 GHz)
AS/NZS CISPR 15 : Radiated and Conducted Emissions (1m semi-anechoic chamber up to 3 GHz)
AS/NZS CISPR 15 (2012) : Transmitted and Radiated
AS/NZS CISPR 15 (2013) : Transmitted and Radiated
AS/NZS CISPR 22 : Radiated and Conducted Emissions (1m semi-anechoic chamber up to 3 GHz)
AS/NZS CISPR 22 (1999, 2008+A1:2005+A2:2006, 2008) : Transmitted and Emitted
AS/NZS CISPR 22 (2009+A1:2010) : Transmitted and Radiated
AS/NZS CISPR 32 (2012) : Transmitted and Radiated
AS/NZS CISPR 32 (2015): Transmitted and Emitted
AS/NZS CISPR 32 Rev. 1 (2016) : EN 55032 (2012+AC:2013);Conducted and Radiated
AS/NZS CNS 13438 (2006) (up to 6 GHz) : Transmitted and Radiated
AS/NZS CNS 13439 : Transmitted and Radiated
AS/NZS CNS 13783-1 : Transmitted and Radiated
AS/NZS CNS 13803 : Transmitted and Radiated
AS/NZS CNS 14115 : Transmitted and Radiated
ASM Handbook, : Vol. 11 Failure Analysis and Prevention (using the methods listed in this Accreditation Scope): Root Cause Analysis, Failure Mechanism, Fractography, Fracture Investigation, Machining Defects, Degradation, Contaminant Identification, Chemical Resistance, Corrosion Analysis, Microstructure, Microstructure Analysis, Material Analysis ASME B46.1. XNUMX Surface Texture: Surface Roughness, Waviness and Tile, Arithmetic Average
ASMT G147 : Conditioning and Processing of Non-Metallic Materials for Natural and Artificial Weathering Tests
ASTM A247 : Microstructure of Graphite in Iron Castings: Ductile Iron, Cast Iron, Sphericity
ASTM A370 : Tensile (Ambient Temperature)
ASTM B117 : Salt Spray (fog) Ambient up to 90 °C
ASTM B117-73, 03, 09; Corrosion, : Salt Spray Environmental Simulation:
ASTM B214 : Sieve Analysis of Metal Powders
ASTM B298 : Continuity of Coating (Continuity Test Only)
ASTM B487 : Coating Thickness
ASTM B557 : Tensile Properties of Aluminum and Magnesium Alloys
ASTM B568 : Coating Thickness with X-Ray Fluorescence (XRF): Coating Thickness
ASTM B571 : Qualitative Adhesion Test of Metallic Coatings (Excluding Scratch Test): Bending, Polishing, Chisel-Knife, File, Grinding-Saw, Heat-Extinguish, Impact, Peeling, Pushing, Scratching-Grid
ASTM B578 : Microhardness of Coatings: Knoop, Vickers
ASTM B678 : Solderability of Coated Products
ASTM B748 : Coating Thickness by Scanning Electron Microscope (SEM)
ASTM C1147 : Tensile Welding Strength
ASTM C1166 : Flame Propagation of Dense and Cellular Elastomeric Gaskets and Accessories
ASTM C121 : Slate Water Absorption
ASTM C1257 : Accelerated Decomposition of Solvent Release Type Sealants
ASTM C1353 : Abrasion Resistance of Dimension Stone Exposed to Pedestrian Traffic Using Turntable Abrasive
ASTM C1442 : Performing Tests on Sealants Using Artificial Aging Apparatus
ASTM C1503 20% : Salt Spray (fog) Ambient up to 90 °C
ASTM C297 : Straight Direction Tensile Strength
ASTM C356 : Linear Shrinkage of Preformed High-Temperature Thermal Insulation Subjected to Wetting Heat
ASTM C584 : Specular Gloss of Glazed Ceramic White Goods and Related Products
ASTM C793 : Effects of Laboratory Accelerated Weathering on Elastomeric Joint Fillers
ASTM C793 (Excluding Carbon-Arc): Effects of Laboratory Accelerated Weathering on Elastomeric Joint Fillers
ASTM D1002 : Stress Loading (Metal to Metal) Shear Strength of Metal Specimens Bonded with Single Lap Joint Adhesive
ASTM D1003 : Haze and Light Transmittance of Transparent Plastics (Unconditional Samples)
ASTM D1004 : Tear Resistance of Plastic Film and Coating (Grave Tear)
ASTM D1004 Tear : Strength “C” Block Method, Tongue Method, Trapezoid, Method, Trouser Method
ASTM D1006 : Exterior Exposure Tests of Paints on Wood
ASTM D1014 : External Exposure Tests of Paints on Steel
ASTM D1044 : Surface Wear of Clear Plastics
ASTM D1052 : Measuring Rubber Deterioration – Interrupt Growth Using Ross Stretch Tool
ASTM D1053 : Rubber Property - Low Temperature Curing: Flexible Polymers and Coated Fabrics (Torsionally Rigidity)
ASTM D1055 (15-16) : Accelerated Aging Tests
ASTM D1055(17-19) : Compression Set Under Constant Deflection
ASTM D1055(24-26) : Stretch Test (Suffix H)
ASTM D1055(27-30) : Low Temperature Test (Compression/Deflection)
ASTM D1056 : Cellular Materials – Foam Density and Compression Deviation Only
ASTM D1148 : Rubber Deterioration-Discoloration of Light Colored Surfaces and Xenon-Arc Apparatus due to Ultraviolet (UV) or UV/Visible Radiation and Heat Exposure
ASTM D1149 : Rubber Degradation – Cracking in an Ozone Controlled Environment
ASTM D115 : Solvent Containing Varnishes (Dielectric Strength Only)
ASTM D1171 : Rubber Deterioration - Surface Ozone Cracking Outdoors or Indoors (Triangle Samples)
ASTM D120 : Rubber Insulation Gloves
ASTM D1203 : Volatile Loss of Plastics Using Activated Carbon Method
ASTM D1204 : Linear Dimensional Changes of Non-Rigid Thermoplastic Sheet or Film at High Temperatures
ASTM D1204 Shrinkage/ : Dimensional Stability
ASTM D1229 : Low Temperature Compression Kit
ASTM D1238 : Melt Flow Rates of Thermoplastics with Extrusion Plastometer
ASTM D1293: pH
ASTM D1388 : Hardness of Fabrics
ASTM D1414 : Rubber O-Ring Test (Low Temperature Test, Excluding Mold Shrink): Tension Test, Tension Set, Compression Set, Relative Density, Immersion, Heat Aging, Hardness, Corrosion
ASTM D1415 : Rubber Property – International Hardness
ASTM D1424 : Tear Strength of Fabrics with Falling Pendulum (Elmendorf-Type) Apparatus
ASTM D1429, Method-D : Specific Gravity
ASTM D1435 : Outdoor Decomposition of Plastics
ASTM D1455 : 60° Glossy Emulsion Floor Polish
ASTM D1475 : Liquid Density: Pycnometer Test
ASTM D149 : Dielectric Disruption Voltage and Dielectric Strength of Solid Electrical Insulation Materials at Commercial Power Frequencies
ASTM D1499 : Filtered Open Flame Carbon Arc Exposures of Plastics
ASTM D1505 : Density-Density by Gradient Tube
ASTM D1525 : Vicat Softening Temperature (VST): Vicat Softening Point
ASTM D1525 (Ratio B): Vicat Softening Temperature of Plastics
ASTM D1599 : Pressure Test of Pipe, Hose and Fittings: Hydrostatic Test
ASTM D1622 : Density of Cellular Plastics: Foam Density
ASTM D1630 : Rubber Property – Abrasion Resistance (Shoe Abrasive)
ASTM D1646 : Rubber – Viscosity, Stress Release and Pre-vulcanization Characteristics (Mooney Viscometer)
ASTM D1654 : Evaluation of Painted or Coated Specimens Exposed to Corrosive Environments
ASTM D1667 : X3 Recommended Test Method for Density (Suffix W)
ASTM D1667 (16-20) : Compression Deviation Test Method
ASTM D1667 (21-25) : Compression Set Under Constant Deflection
ASTM D1670/D1670M : Endpoint of Failure in Accelerated and Outdoor Weathering of Bituminous Materials
ASTM D1693 : Environmental Stress - Cracking of Ethylene Plastics
ASTM D1708 : Tensile Properties of Plastics Using Microtension Samples
ASTM D1709 : Impact Strength of Film: Dart Drop Impact
ASTM D1710 : Dimensional Stability of PTFE
ASTM D1729 : Visual Evaluation of Color Difference in Opaque Materials
ASTM D1735 : Temperature and Humidity Temperature: -70 °C to 180 °C Humidity: 10% RH to 95% RH
ASTM D1781 : Climbing Drum Peel: Peel Strength
ASTM D1824 : Apparent Viscosity: Rotational Viscosity, Brookfield Viscosity
ASTM D1876 : Peel Resistance: T-Peel Test
ASTM D1894 : Static and Kinetic Friction Coefficients of Plastic Film and Coating
ASTM D1922 : Stretching Tear Resistance of Film: Elmendorf Tear Resistance
ASTM D1925-772(Withdrawn-1995) : Yellowness Index of Plastics
ASTM D2084 : Rubber Property – Vulcanization Using Oscillating Disc Hardening Meter
ASTM D2136 : Coated Fabrics – Low Temperature Bending Test
ASTM D2197 : Scratch Adhesion
ASTM D2228 : Rubber Property – Relative Abrasion Resistance by Pico Abrader Method
ASTM D2240 : Durometer Hardness (A and D Scales): Shore Hardness, Indent Hardness
ASTM D2240 (Type : A) Hardness
ASTM D2240(Type A,D,M,andOO) : Rubber Property – Durometer Hardness
ASTM D2244 : Calculating Color Difference from Instrumented Color Coordinates
ASTM D2247 : Temperature and Humidity Temperature: -70 °C to 180 °C Humidity: 10%RH to 95%RH
ASTM D2261 : Tongue Tear Strength of Fabrics (Single Tear) Procedure
ASTM D2261 Tear : Strength “C” Block Method, Tongue Method, Trapezoid, Method, Trouser Method
ASTM D2344 : Short Beam Shear Strength
ASTM D256 : Izod Pendulum Impact Strength: Impact Strength, Izod Impact, Reverse Notch Impact
ASTM D2565 : Operating Aqueous and Anhydrous Xenon-Arc Type Light Exposure Apparatus for Plastics Exposure
ASTM D257 : DC Resistance or Conductivity of Insulation Materials
ASTM D2583 : Indentation Hardness of Rigid Plastics by Barcol Impressor
ASTM D2584 : Loss of Ignition: Ash Content, Fill Content
ASTM D2616 : Evaluation of Visual Color Difference of Opaque Materials
ASTM D2632 : Rubber Property – Flexibility with Vertical Rebound
ASTM D2732 : Shrinkage of Plastic Film
ASTM D2734 : Blank Content of Reinforced Plastics and Composites
ASTM D2794 : Impact Resistance of Coatings
ASTM D2803 : Filiform Procedures AC Temperature: -70 °C to 175 °C, Humidity: 10% RH to 95% RH
ASTM D297 : Rubber Density (Hydrostatic Method Only)
ASTM D2990 : Creep Test: Creep-Fracture, Tensile Creep, Flexural Creep, Compressive Creep
ASTM D3012 : Thermal Oxidative Stability: Biaxial Rotator
ASTM D3039 : Tensile Properties of Composites
ASTM D3045 : Unloaded Thermal Aging of Plastics
ASTM D3137 : Standard Test Method for Rubber Property - Hydrolytic Stability
ASTM D3163 : Determination of Adhesive Bonded Rigid Plastic Lap Shear Strength in Shear with Tensile Loading
ASTM D3167 : Floating Cylinder Shell
ASTM D3171 : Filling Content of Composite Materials (Excluding Microwave Digestion): Carbon Fiber Content, Aramid Filling Content
ASTM D3182 : Procedures for Mixing Standard Compounds and Preparation of Standard Vulcanized Sheets
ASTM D3183 : Rubber – Preparation of Test Parts from Products
ASTM D3274 : Evaluation of the Degree of Surface Deformation of Paint Films by Fungal or Algae Growth or Soil and Dirt Buildup
ASTM D3294 : Dimensional Stability of PTFE
ASTM D3354, : Method B Blocking Film Load by Parallel Plate Method
ASTM D3359 : Adhesion Measurement with Tape Test
ASTM D3363 : Pencil Hardness
ASTM D3364 : Flow Rates for Poly(Vinyl Chloride) With Molecular Structure Effects
ASTM D3389 : Abrasion Resistance of Coated Fabrics (Turntable Abrasive)
ASTM D3395-992(Withdrawn-2008) : Rubber Deterioration – Dynamic Ozone Cracking in a Room
ASTM D3418 : Differential Scanning Calorimetry (DSC): Melting Point (Tm), Glass Transition (Tg), Heat of Fusion, Heat of Crystallization, Transition Temperatures, Transition Heat
ASTM D3424 : Evaluation of Light Fastness and Weatherability of Printed Material
ASTM D3424 (Excluding Method 2): Evaluation of Relative Light Fastness and Weatherability of Printed Material
ASTM D3479 : Stress – Stress Fatigue of Composite Materials: SN Curves
ASTM D3492 : Rubber Contraceptives (Male Condoms)
ASTM D3498 : Adhesives for Bonding Plywood to Timber Frame for Flooring Systems
ASTM D3574 : Flexible Cellular Materials, Urethane Foam (Test A, B1, CF, I1, K, L): Density, Indent Force Deviation (IFD), Compression Force Deviation, Compression Set, Tear Resistance, Static Loss of Force, Dry Heat Aging ,Wet Aging
ASTM D3574 (Test D): Compression
ASTM D3574 (Test F)Tear : Strength “C” Block Method, Tongue Method, Trapezoidal, Method, Trouser Method
ASTM D3574 (Test J): Flexible Cellular Materials - Flooring, Bonded and Molded Urethane Foams - Steam Autoclave Aging
ASTM D3574 (Test K): Flexible Cellular Materials - Flooring, Bonded and Molded Urethane Foams - Dry Heat Aging
ASTM D3574 (Test,A): Density Test Urethane Foams
ASTM D3574 (Test-E): Flexible Cellular Materials - Flooring, Bonded and Molded Urethane Foams - Tensile Test-
ASTM D3574 (Test-F): Flexible Cellular Materials - Flooring, Bonded and Molded Urethane Foams - Tear Test-
ASTM D3574(Test-C) : Compression Force Deviation Test
ASTM D3574(Test-D) : Fixed Deflection Compression Set
ASTM D3575(Chapter, 17-24): Flexible Cellular Materials Made of Olefin Polymers – Compression Deviation
ASTM D3575(Chapter, 9-16) : Flexible Cellular Materials Made from Olefin Polymers – Compression Set Under Constant Deflection
ASTM D3575(Suffix,W): Density - Flexible Cellular Materials Made from Olefin Polymers
ASTM D3575–Suffix,L : (Chapter 26-32) Flexible Cellular Materials Made of Olefin Polymers – Water Absorption
ASTM D3575–Suffix,L (Chapter 26-32) : Flexible Cellular Materials Made of Olefin Polymers – Water Absorption
ASTM D3575-Suffix-S(Chapter 35-42)Flexible: Cellular Materials Made of Olefin Polymers -Thermal Stability
ASTM D3577 : Rubber Surgical Gloves
ASTM D3578 : Tire Inspection Gloves
ASTM D3641 : Injection Molding Test Thermoplastic Molding and Extrusion Materials Examples
ASTM D3679 : Standard Specifications for Rigid Poly (Vinyl Chloride) (PVC) Exterior Cladding (Sections 6.10, 6.11 and 6.13)
ASTM D374-Methods: AC Thickness of Electrical Insulation
ASTM D3763 : High Speed Puncture Properties of Plastics Using Load and Displacement Sensors
ASTM D3767 : Standard Practice for Rubber - Measuring Dimensions
ASTM D380 : Rubber Hose for Automotive Air and Vacuum Brake Systems
ASTM D3801 : Measurement of Comparative Combustion Properties of Solid Plastics in Vertical Position
ASTM D3815 : Accelerated Aging of Pressure Sensitive Tape with Carbon Arc Exposure Apparatus
ASTM D3841 : Glass Fiber Reinforced Polyester Plastic Panels (Part 8.8)
ASTM D3850 : Thermogravimetric Analysis (TGA Analysis)
ASTM D3884: Wear Linear Tab
ASTM D395 : Compression Kit
ASTM D395, : Method B Compression Set
ASTM D4014 : (Excluding 8.2.3, 8.2.5, and 8.2.6) Plain and Steel Laminated Elastomeric Bearings for Bridges
ASTM D4014 (Except 8.2.3, 8.2.5, and 8.2.6): Plain and Steel Laminated Elastomeric Bearings for Bridges
ASTM D4039 : Reflection Fog of Glossy Surfaces
ASTM D4060 : Abrasion Resistance Organic Coatings with Taber Abrasive
ASTM D412 : Vulcanized Rubber and Thermoplastic Elastomers – Tension
ASTM D413 : Rubber Property – Adhesion to Flexible Surface
ASTM D413; : Adhesion Test / Peeling
ASTM D4141 : Performing Accelerated Outdoor Exposure Tests of Coatings (Procedure A)
ASTM D4157 : Standard Test Method for Abrasion Resistance of Textile Fabrics (Oscillating Roller Method)
ASTM D4214 : Evaluation of Chalking Degree of Exterior Paint Films
ASTM D4226 : Impact Resistance of Rigid Poly(Vinyl Chloride) Construction Products
ASTM D429 : Rubber Property - Adhesion to Hard Surfaces
ASTM D430 : Rubber Failure – Dynamic Fatigue
ASTM D4303 : Light Fastness of Pigments Used in Artist Paints (Procedures A, C and D)
ASTM D4329 : Working Light and Water Exposure Apparatus for Plastics Exposure (Fluorescent UV Condensation Type)
ASTM D4355 : Deterioration of Geotextiles by Exposure to Ultraviolet Light and Water (except XenonArc Type Apparatus, Section 9.5)
ASTM D4364 : Performing Outdoor Accelerated Decomposition of Plastics Using Concentrated Sunlight
ASTM D445 : Kinematic Viscosity
ASTM D4459 : Accelerated Light Fastness for Plastics Exposure for Indoor Applications Xenon-Arc Type (Water-cooled) Light Exposure Apparatus Operation
ASTM D4482 : Rubber Property - Extension Cycling Fatigue
ASTM D454 : Deterioration of Rubber by Heat and Air Pressure
ASTM D4587 : Fluorescent Exposure of Coatings
ASTM D4591 : Differential Scanning Calorimetry of Fluoropolymers (DSC): Melting Point
ASTM D461 (Withdrawn 2004): Tear Strength “C” Block Method, Tongue Method, Trapezoid, Method, Trouser Method
ASTM D4637/D4637M, (Sections 8.19 and 8.20) : Weather Resistance of EPDM Sheet Used in Single Ply Roof Membrane
ASTM D4674 : Accelerated Test for Color Stability of Plastics Exposed to Indoor Fluorescent Lighting and Window Filtered Daylight
ASTM D4674 (Method IV): Accelerated Testing for Color Stability of Plastics Exposed to Indoor Office Environments
ASTM D4703 : Compression Molding of Thermoplastic Materials into Test Specimens, Plates or Sheets
ASTM D471 : Rubber Property – Effect of Liquids
ASTM D4726 : Standard Specifications for Rigid Poly (Vinyl Chloride) (PVC) External Profile Extrusions Used for Joined Windows and Doors (Part 7.1 only) ASTM D6675 Accelerated Exterior Cosmetic Corrosion Testing of Organic Coatings on Automotive Sheet Metal
ASTM D4798/D4798M : Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)
ASTM D4799 : Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Fluorescent UV Condensation Method)
ASTM D4804 : Flammability of Films
ASTM D4812 : Notchless Cantilever Beam Impact Strength of Plastics
ASTM D4966 : Standard Test Method for Abrasion Resistance of Textile Fabrics (Martindale Abrasion Test Method)
ASTM D4986; IEC 60950-1 (Section 4.7.3.1 – 4.7.3.6): Horizontal Combustion Foam Material Test
ASTM D5031 : Testing Paints, Varnishes, Lacquers, and Related Products Using Closed Carbon Arc Light and Water Exposure Apparatus
ASTM D5071 : Water Operation of Xenon Arc Exposure Apparatus for Exposure of Photodegradable Plastics
ASTM D5105 : Performing Accelerated Outdoor Weathering in Pressure Sensitive Bands Using Concentrated Natural Sunlight
ASTM D5132 : Horizontal Burning Rate of Polymeric Materials Used in Passenger Compartments of Motor Vehicles
ASTM D5151 : Medical Gloves Hole Detection
ASTM D5178 : Mar Resistance of Coatings
ASTM D518-992(Withdrawn-2008) : Rubber Deterioration – Surface Cracking
ASTM D5208 : Fluorescent Ultraviolet (UV) Exposure of Photodegradable Plastics ASTM D5215 Instrumental Evaluation of Painting Vinyl Floors with Adhesives
ASTM D5215 : Instrumental Evaluation of Painting Vinyl Floors with Adhesives
ASTM D522, : Method B Mandrel Bend Test of Coatings
ASTM D523 : Mirror Gloss
ASTM D5250 : Poly(vinyl chloride) Gloves for Medical Application
ASTM D5289 : Rubber Property – Vulcanization Using Rotorless Curing Gauges
ASTM D542 : Index of Refractive: Index of Refractive, Refractometer
ASTM D5420 : Impact Strength of a Flat, Rigid Plastic Specimen by a Falling Hammer Impact (Gardner Impact)
ASTM D5427 : Temperature and Humidity Temperature: -70 °C to 180 °C Humidity: 10% RH to 95% RH
ASTM D543 : Evaluation of Resistance of Plastics to Chemical Reagents
ASTM D5587 Tear : Strength “C” Block Method, Tongue Method, Trapezoid, Method, Trouser Method
ASTM D5630-Method: B Ash Content: Fill Content
ASTM D5668(Method,A) : Rubber from Synthetic Sources - Volatile Matter
ASTM D570 : Water Absorption of Plastics
ASTM D572 : Rubber – Deterioration by Heat and Oxygen
ASTM D5722 : Performing Outdoor Accelerated Weathering of Factory Coated Embossed Chipboard Using Concentrated Natural Sunlight and a Soak-Freeze-Thaw Procedure
ASTM D573 : Rubber – Deterioration in Air Oven
ASTM D5733 (Retracted 2008) : Tear Strength “C” Block Method, Tongue Method, Trapezoidal, Method, Trouser Method
ASTM D5734-012(Withdrawn-2008) : Tear Strength of Non-Woven Fabrics with Falling Pendulum (Elmendorf) Apparatus
ASTM D5735-012(Withdrawn-2009) : Tear Strength of Non-Woven Fabrics by Tongue (Single Tear) Procedure
ASTM D575 : Rubber Properties in Compression
ASTM D5894 : Cyclic Salt Fog/UV Exposure of Painted Metal (Alternating Exposure in Fog/Dry Booth and UV/Condensation Booth)
ASTM D5894-05 : Salt Spray (fog) Ambient up to 90 °C
ASTM D5963 : Rubber Properties – Abrasion Resistance (Rotary Drum Abrasive)
ASTM D610 : Evaluation of Corrosion Degree on Painted Steel Surfaces
ASTM D6100 : Dimensional Stability of POM (Acetal)
ASTM D6124 : Residual Powder on Medical Gloves
ASTM D6147 : Sealing of Gasket Materials
ASTM D618 : Conditioning Plastics for Testing
ASTM D621 : (1994)* Deformation Under Load
ASTM D622 : Standard Test Method for RubbASTM D256 Determination of Izod Pendulum Impact Resistance of Plastics
ASTM D623 : Compression Heat Generation and Flexural Fatigue
ASTM D624 : Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
ASTM D624 (Die C) : Tear Strength “C” Block Method, Tongue Method, Trapezoidal, Method, Trouser Method
ASTM D6261 : Dimensional Stability of Polyester
ASTM D6284 : Rubber Property – Effect of Aqueous Solutions with Available Chlorine and Chloramine
ASTM D6319 : Nitrile Examination Gloves for Medical Application
ASTM D6324 : Male Condoms Made of Polyurethane 2139 Lubricant Test on Condoms
ASTM D635 : Burn Rate and/or Scope and Burn Time of Plastics in Horizontal Position
ASTM D638 : Tensile Properties of Plastics
ASTM D648 : Deflection Temperature of Plastics Under Edge-Position Bending Load
ASTM D648, : Method B Heat Deviation Temperature (HDT, DTUL)
ASTM D6492 : Detection of Hexavalent Chromium (Hex Chrome, Cr VI) by Spot Test
ASTM D660 : Evaluation of Grade Control of Exterior Paints
ASTM D661 : Evaluation of Cracking Degree of Exterior Paints
ASTM D662 : Evaluation of Erosion Degree of Exterior Paints
ASTM D6662 (Chapter 6.3) : Polyolefin Based Plastic Timber Flooring Boards
ASTM D6695 : Xenon-Arc Exposure of Paint and Related Coatings
ASTM D6754 (Chapter 8.15) : Ketone Ethylene Ester Based Sheet Roofing
ASTM D6754/D6754M: Standard Specification for Ketone Ethylene Ester-Based Sheet Roofing
ASTM D6864: Standard Specification for Preservation of Color and Appearance of Solid Color Plastic Exterior Cladding Products
ASTM D6869 : Moisture Content of Plastics by Karl Fischer Titration
ASTM D6878/D6878M, (Chapter 7.13) : Weather Resistance of Thermoplastic Polyolefin Based Roofing
ASTM D6901 : Standard Specification for Artists' Colored Pencils
ASTM D695 : Compressive Properties of Rigid Plastics
ASTM D6977 : Polychloroprene Examination Gloves for Medical Application
ASTM D7091 : Non-Destructive Measurement of Dry Film Thickness of Non-Magnetic Coatings Applied to Ferrous Metals and Non-Magnetic, Non-Conductive Coatings Applied to Non-Ferrous Metals
ASTM D7121 : Rubber Property - Flexibility Using Schob Type Recoil Pendulum
ASTM D714 : Evaluation of Swelling Degree of Paints
ASTM D7198 : Disposable Embalming Gloves for Disposable Applications
ASTM D7251: Standard Specification for Color and Appearance Protection of Variegated Color Plastic Exterior Cladding Products
ASTM D7254 : Standard Specification for Polypropylene (PP) Exterior Cladding (Section 6.3)
ASTM D732 : Shear Strength with Punch Tool
ASTM D750 : Rubber Deterioration Using Artificial Weathering Apparatus
ASTM D750 (Excluding Caron-Arc): Rubber Deterioration Using Artificial Weathering Apparatus
ASTM D7661 : Determining the Compatibility of Personal Lubricants with Natural Rubber Latex Condoms
ASTM D772 : Evaluation of Exfoliation Degree (Scaling) of Exterior Paints
ASTM D7774 : Flexural Fatigue Properties of Plastics
ASTM D7791 : Axial Fatigue Properties of Plastics: Tensile Fatigue of Plastics
ASTM D7793 : Outdoor Exposure of Vinyl Siding
ASTM D785 : (Scale R) Rockwell Hardness of Plastics and Electrical Insulating Materials
ASTM D785 (Scale R): Rockwell Hardness of Plastics and Electrical Insulating Materials
ASTM D7856 : Color and Appearance Retention of Plain and Variegated Color Plastic Exterior Cladding Products Using CIELab Color Space
ASTM D7869 : Standard Practice for Xenon Arc Exposure Testing with Enhanced Light and Water Exposure for Transport Coatings
ASTM D790 : Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
ASTM D792 : Density and Specific Gravity of Plastics by Displacement
ASTM D792 (Method A): Density/Specific Gravity
ASTM D794 2 : (Retracted 1998) Determination of the Permanent Effect of Heat on Plastics
ASTM D813 : Rubber Deterioration – Crack Growth
ASTM D814 : Rubber Property - Vapor Conduction of Volatile Liquids
ASTM D822 : Testing on Paint and Related Coatings and Materials Using a Filtered OpenFlame Carbon-Arc Light and Water Exposure Apparatus
ASTM D832 : Rubber Conditioning for Low Temperature Testing
ASTM D865 : Rubber – Deterioration by Heating in Air (Test Tube Housing)
ASTM D870 : Immersion in Water
ASTM D876 : (Chapter 59, 60, 62) Volume Resistance – Non-Rigid Vinyl Chloride Polymer Tubing Used for Electrical Insulation
ASTM D876 (Chapter 59, 60, 62) : Volume Resistance – Non-Rigid Vinyl Chloride Polymer Tubing Used for Electrical Insulation
ASTM D882 : Tensile Properties of Thin Plastic Coating
ASTM D897 : Tensile Properties of Adhesive Bonds
ASTM D903 : Peel or Peel Strength of Adhesive Bonds
ASTM D903, : Adhesion Test/Peeling
ASTM D904 : Exposure of Adhesive Samples to Artificial (Carbon-Arc Type) and Natural Light
ASTM D904 (Method A) : Rubber Deterioration Using Artificial Weathering Apparatus
ASTM D92 : Flash and Fire Points from the Cleveland Open Cup Tester
ASTM D925 : Rubber Property - Painting of Surfaces (Contact, Migration and Diffusion)
ASTM D93 : Flash Point with Pensky-Martens Closed Cup Tester
ASTM D945 : Rubber Properties in Compression or Shear (Mechanical Oscillograph)
ASTM D953 : Bearing Strength
ASTM D968 : Abrasion Resistance by Falling Abrasive: Falling Sand Abrasion
ASTM D974 : Acid Number and Base Number by Color Indicator Titration
ASTM D991 : Rubber Property – Volume Resistance of Electrically Conductive and Antistatic Products.
ASTM E10 : Brinell Hardness (500, 1500, 3000 kgf Scales)
ASTM E1004 : Electrical Conductivity of Solids by Electromagnetic (Eddy-Current) Method (%IACS)
ASTM E1064 : Water in Organic Liquids by Karl Fischer Titration
ASTM E1086 : Spectrometric Analysis of Stainless Steel
ASTM E112: Grain Size
ASTM E1131 : Thermogravimetric Analysis (TGA): Ash Content, Filling Content, Carbon Content, Volatility Studies
ASTM E1164 : Obtaining Spectrometric Data for Object Color Evaluation
ASTM E1251 : Spectrometric Analysis of Aluminum and Aluminum Alloys
ASTM E1252 : Infrared Spectrum for Qualitative Analysis: FT Infrared Microscopy, IR Scanning, FTIR Analysis, Organic Material Identification
ASTM E1331 : Reflectance Factor and Color by Spectrophotometry Using Hemispheric Geometry
ASTM E1348 : Coloring by Spectrophotometry Using Hemispheric Geometry
ASTM E1349 : Reflectance Factor by Spectrophotometry Using Bidirectional Geometry
ASTM E1508 : Energy Dissipative Spectroscopy (EDS):EDX, Elemental Scanning, Micro Identification, Pollutant Identification
ASTM E1545 : Thermomechanical Analysis (TMA): Glass Transition (Tg)
ASTM E1621 : X-Ray Fluorescence (XRF): Chemical Analysis of Elements from Na to U, Element Identification, Heavy Metals, Trace Elements, Restriction of Hazardous Substances (ROHS), Chlorine in Oil
ASTM E165(8.9.2Visible,Light,Inspection) : Liquid Penetrant
ASTM E1799 : Standard Practice for Visual Inspections of Photovoltaic Modules
ASTM E18 : Rockwell Hardness
ASTM E1999 : Spectrometric Analysis of GC Manual Gas Chromatography (GC) in Cast Iron: Mass Spectrometry (GC/MS), Identification and Quantification of Components of Organic Mixtures, Flame Ionization (GC/FID), Quantification of Components of Organic Mixtures, Phthalate Content, Methyl Methacrylate Monomer Content GDS Manual Glow Discharge Spectrometry (GDS): Chemistry, Chemical Analysis, Metal Composition, Aluminum Alloys, Brass, Cast Irons, Copper Alloys, Ferrous Alloys, Nickel Alloys, Stainless Steel, Steel, Super Alloys, Tool Steels, Welding Metals
ASTM E290 : Bending Test (Excluding Guided Bending)
ASTM E3 : Sample Preparation
ASTM E313 : Whiteness and Yellowness Indexes of Near-White Opaque Materials
ASTM E340: Macroetch/Macro Exam
ASTM E381: Macroetch / Macro Exam
ASTM E384: Microhardness
ASTM E407: Micro-etching
ASTM E466, : E468 Fatigue Test, Force-Controlled, and Presentation of Test Results
ASTM E498 : Leak Test (Helium and Air)
ASTM E499 : Leak Test (Helium and Air)
ASTM E515 : Leak Test (Helium and Air)
ASTM E606 : Fatigue Test, Strain Controlled
ASTM E662 : Optical Smoke Density
ASTM E794 : Differential Scanning Calorimetry (DSC): Melting Point, Crystallization Temperature
ASTM E8 : Tensile (Ambient Temperature)
ASTM E831 : Thermomechanical Analysis (TMA): Thermal Expansion, CTE, CLTE Probe Types: Expansion, Penetration, Tension (Film/Fiber), 3-Point Bending
ASTM F1112 : Static Testing of Tubeless Pneumatic Tires for Inflation Pressure Loss Rate
ASTM F1292 : Impact Mitigation of Surface Coating Materials in the Use Area of Playground Equipment
ASTM F1342(Procedure,A) : Puncture Resistance of Protective Clothing Material
ASTM F146 : Fluid Resistance of Gasket Material
ASTM F1515 : (Water Cooled Xenon Only) Measuring Light Stability of Flexible Flooring by Color Change
ASTM F152 : Tension Test of Non-Metallic Gasket Materials
ASTM F2111 : Intergranular Attack (IGA) and Final Grain Pitting
ASTM F2391 : Pack/Seal Integrity (Leak/No Leak Ratio)
ASTM F36 : Compressibility and Recovery of Gasket Materials
ASTM F606, : Mechanical Properties of F606M Fasteners, Washers and Rivets (Excluding Single Shear, Taper Protection, Compressive Load and Brittleness):Product Hardness, Protective Load, Axial Tension, Wedge Tension, Brittleness, Decarburization, Carburization
ASTM F88 : Sealing Strength of Films
ASTM G147 : Conditioning and Processing of Non-Metallic Materials for Natural and Artificial Weathering Tests
ASTM G151 : Exposure of Non-Metallic Materials in Accelerated Testing Equipment Using Laboratory Light Sources
ASTM G152 : Operating Open Flame Carbon-Arc Light Apparatus for Exposure of Non-Metallic Materials
ASTM G153 : Operating Enclosed Carbon Arc Light Apparatus for Exposure of Non-Metallic Materials
ASTM G154 : Fluorescent Light Apparatus for UV Exposure of Non-Metallic Materials
ASTM G155 : Operating Xenon-Arc Light Apparatus for Exposure of Non-Metallic Materials
ASTM G195 : Abrasion Testing with Taber Abrader Chamber Manual Environmental Simulation: Thermal Shock, Temperature and Humidity Cycle Best Range: (-73 to 1100) ºC / (-100 to 2000) ºF Best Control: ± 0.01 ºC, ± % 1 Humidity (not available for all ranges)
ASTM G201 : Exposure by Air Recirculating Outdoor Glass Lined Exposure Bracket
ASTM G24 : Exposure to Daylight Filtered Through Glass
ASTM G26-962 : (Withdrawn 2000) Working Light Exposure Apparatus with and without Water for Non-Metallic Materials Exposure (Xenon-Arc Type)
ASTM G7 : Atmospheric Environmental Exposure Testing of Non-Metallic Materials
ASTM G7 Atmospheric: Environmental Exposure Testing of Non-Metallic Materials
ASTM G85 Annex 1: Salt Spray (fog) Ambient up to 90 °C
ASTM G85 Annex 2: Salt Spray (fog) Ambient up to 90 °C
ASTM G85 Annex 3: Salt Spray (fog) Ambient up to 90 °C
ASTM G85 Annex 4: Salt Spray (fog) Ambient up to 90 °C
ASTM G85 Annex 5: Salt Spray (fog) Ambient up to 90 °C
ASTM G85(Appendix: 3) Modified Salt Spray (Fog) Test
ASTM G87 : SO2 Temperature: Ambient - 50 °C
ASTM G90 : Performing Outdoor Accelerated Decomposition of Non-Metallic Materials Using Concentrated Natural Sunlight
ATC04-9-2-4 : Leak Test Microflow , Mass Extraction
ATC04-9-2-5 : Leakage/Flow Test Regular Flow
BETS-1, Issue 1 (1996-11)4 : Radio Communications
BETS-3, Issue 3 (2015-03) 4 : Radio Communications
BETS-4, Issue 1 (1996-11)4 : Radio Communications
BETS-5, Issue 1 (1996-11)4 : Radio Communications
BETS-6, Issue 2 (2005-08)4 : Radio Communications
BETS-7, Issue 2 (2008-06)4 : Radio Communications
BETS-8, Issue 1 (1996-11)4 : Radio Communications
BETS-9, Issue 1 (1996-11)4 : Radio Communications
BMW GS95002 (2004/2010): Immunity Transmitted on Signal Lines
BMW GS95003-2, GS95024-2-1 (2010) : Over/Under, Reverse, Jump Start, Faulty Regulator Voltages, electrical stress
BMW GS95024-2-1 (2010) : Automotive EMC Tests Immunity to Voltage Surges, Supply Voltage Line Disturbances (Spills, Drops, Start, Ramp Up/Down)
Boeing BMS1-57L-2011 (Part 8.10) : Weather Resistance – Silicone Rubber, Extreme Low Temperature Resistant
BS 103-01B (SAE J3151) : Shrinkage/Dimensional Stability
BS EN 455-1 : Disposable Medical Gloves – Requirements and Testing for Getting rid of Holes
BS EN 455-2 : Disposable Medical Gloves – Requirements and Tests for Physical Properties
BS EN 50121-3-2 (2006) : Railway Applications
BS EN 50121-4 (2006) : Railway Applications
BS EN ISO 3704 : Natural Rubber Latex Male Condoms
CAN/CSA C22.2 No.0.17 (Section 4.2.5) : Horizontal Combustion Foam Material Test
CAN/CSA C22.2 No.0.17 (Section 5.4) : Flexural Strength Test
CAN/CSA C22.2 No.0.17 (Section 5.5) : Tensile Strength Test
CAN/CSA C22.2 No.0.17 (Section 5.7) : Tensile Impact Test
CAN/CSA C22.2 No.0.17 (Section 9.6) : Ball Pressure Test
CAN/CSA C22.2 No.60950-1 (Appendix A1) : Combustion Test Using 127 mm Flame Source Used in Electrical Equipment Evaluations
CAN/CSA C22.2 No.60950-1 (Appendix A2) : Combustion Test Using 20 mm Flame Source Used in Electrical Equipment Evaluations
CAN/CSA C22.2 No.60950-1 (Section 1.7.11): Endurance of Marking Test
CAN/CSA C22.2 No.60950-1 (Section 4.5.5) : Ball Pressure Test
CAN/CSA C22.2 No.60950-1 (Sections 4.2.1 – 4.2.4) : Constant Force Test
CAN/CSA C22.2 No.60950-1 (Sections 4.7.3.1 – 4.7.3.6) : Test of Horizontal Burning Foamed Material
CAN/CSA C22.2 No.61010-1 (Section 10.5.3) : Ball Pressure Test
CAN/CSA C22.2 No.61010-1 (Section 5.3) : Endurance of Marking Test
CAN/CSA C22.2 No.61010-1 (Section 8.1.1): Constant Force Test
CFR 47 FCC Part 15B (using ANSI C63.4:2014, 2009 2003) and Part 18 (using MP-5): Radiated and Conducted Emissions (1m semi-anechoic chamber up to 3 GHz)
CFR 47 FCC Part 15C (using ANSI C63.10:2013): Radio
Chrysler : CLP-463DB-12-01 Fog Resistance of Interior Materials
Chrysler CS-11979 (2010): Immunity Transmitted on Signal Lines
Chrysler DC 11224 (2007) : Conducted Immunity to Power lines Supply Voltage transients
Chrysler DC-10614 : Automotive EMC Tests Electrostatic Discharge (ESD)
Chrysler DC-10614 (2004) : Bulk Current Injection (BCI) -Substitution Method
Chrysler DC-10615 (2007): Immunity Conducted on Signal Lines
Chrysler LP463CB-10-01-A2 : Heat Aging (Exposure, Deterioration)
Chrysler LP-463DB-12-01 : Fogging Gravimetric Photometric
Chrysler LP-463DB-16-03 : Flammability
Chrysler LP-463DD-07-01 (Mandrel) : Cold Cracking/ Flexibility
Chrysler LP-463DD-08-02 Environmental : Air Conditioning
Chrysler LP-463KC-04-01 (Procedure 1) : Cleanability
Chrysler LP-463KC-04-01 (Procedure 2) : Cleanability
Chrysler LP-463KC-1-01 : Paint Transfer – Color Bleeding
Chrysler LP-463LB-10-01; : Adhesion Test / Peeling
Chrysler LP463LB-11-01A : Cold Cracking/ Flexibility
Chrysler LP463LB-11-01B : Cold Cracking/ Flexibility
Chrysler LP463LB-12-01B Environmental : Air Conditioning
Chrysler LP463LB-13-01 : Heat Aging (Exposure, Deterioration)
Chrysler LP-463PB-09-01 : Temperature and Humidity Temperature: -70 °C to 180 °C Humidity: 10% RH to 95% RH
Chrysler LP-463PB-10-01 : Salt Spray (fog) Ambient up to 90 °C
Chrysler LP-463PB-54-01 : Crock Mar Resistor
Chrysler Method CP-342 Sec D-3; : Corrosion, Salt Spray Environment Simulation:
Chrysler Method CP-342 Sec D-3-c; : Wear Environmental
Chrysler Method CP-342 Sec D-3-d; : Vibration (Slam Bang)-Speed 750 cpm, Height at 3 mm, Force (270 to 310) N Environmental Simulation
Chrysler Method CP342 Sn D-3-e; : Chemical Resistance Environmental Simulation
Chrysler Method CP-342 Sec D-3-I; : Moisture Corrosion/Environmental Simulation
Chrysler Method CP-342 Sn. k; : Aiming and Adjustment Range – Headlight Photometrics
Chrysler Method PF-4088 2.6.7 : Seal
Chrysler Method PF-4606 3.2 : Seal
Chrysler Methods PF 4606 2.1.6; : Thermal Cycling, Environmental Chamber Corrosion/Environmental Simulation
Chrysler MS-HZ100 : (Hot Plate) Heat Aging (Exposure, Deterioration)
Chrysler MS-HZ-100 (Table 2) : Heat Aging (Exposure, Deterioration)
Chrysler MS-HZ1001 : Environmental Conditioning
Chrysler MS-JB20001 : Salt Immersion
Chrysler MS-JP1-31 : Salt Immersion
Chrysler MS-JP9-41 : Flammability
Chrysler MS-PB1-2 : Salt Water Immersion
CISPR 12 : Measurement Method of Broadband/Narrowband Electromagnetic Emissions from Vehicles
CISPR 12 (2007+A1:2009) : Automotive EMC
CISPR 25 (2008): Transmitted and Emitted
CISPR 25 (2008): Automotive EMC
CISPR 25 Part 6.4 : RF Radiated Emissions
CISPR 25 Sections 6.2, 6.3; : RF Conducted Emissions
CMVSS 215 : Buffer Pendulum/Barrier Effect (1 to 12) mph pulses Pendulum/vehicle mass 9.800 lb (-40 to 85) ºC sample conditioning 1000 frames per second using three high speed video cameras
CP-342 Sec D-3h(3) : Thermal Cycling, Environmental Chamber Corrosion/Environmental Simulation
CP-342 Sec D-3q : Thermal Cycling, Environmental Chamber Corrosion/Environmental Simulation
CSA C22 No.17 (Section 5.2) : Charpy Impact Test
CSA C22 No.17 (Chapter 5.3): Izod Effect
Daimler MBN 10284-2 (2008) : Transmitted Immunity on Signal Lines
Daimler/Chrysler DC-10614 (2004) : Transient Emissions Conducted Automotive EMC Tests
DBL 5306 (7.2, 7.3) : Cold Cracking/ Flexibility
DBL 5307 (5.1) : Flammability
DBL 5463 (PV00-4.3.1) : Environmental Conditioning
DBL 5471 (PV95-4.1) : Environmental Conditioning
DBL 5471 (PV95-4.2) : Heat Aging (Exposure, Deterioration)
DBL 5972 (4.3) : Heat Aging (Exposure, Deterioration)
DBL5972 (4.4) : Environmental Conditioning
DBL7384 (Part : 5.13) Soft Feeling Paints on Plastic Parts – Internal Components
DC-11224 (2007) : Bulk Current Injection (BCI) – Substitution Method
Delphi DX551200 Sect 4.3, 4.3.2 : Salt Spray (fog) Ambient up to 90 °C
Delphi DX551300 Sect 4.3, 4.3.2 : Salt Spray (fog) Ambient up to 90 °C
Delphi SD2-208 (Section 5.3.2) : Odor Test
DIN 50017 : Temperature and Humidity Temperature: -70 °C to 180 °C Humidity: 10%RH to 95%RH
DIN 50018 : Temperature: Ambient - 50 °C
DIN 50021 : Salt Spray (fog) Ambient up to 90 °C
DIN 53 504 : Determination of Tear Growth Propagation Trousers Test Piece
DIN 53 5052(Withdrawn-2012) : Hardness Test of Shore A and Shore D Rubber
DIN 53 507 : Determination of Tensile Strength
DIN 53 507 : Determination of Tensile Strength
DIN 53 508 : Accelerated Aging of Rubber
DIN 53 509 : 22(Extended-2011) Resistance of rubber against ozone cracking
DIN 53 509 22(Extended-2011) : Resistance of rubber against ozone cracking
DIN 53 512 : Rubber, Vulcanized or Thermoplastic - Determination of Kickback Resistance
DIN 53 5162 2 (Withdrawn 2014) : Determination of Abrasion Resistance
DIN 53 5212(Redrawn-1999) : Determination of the Behavior of Rubber and Elastomers When Exposure to Fluids and Vapors
DIN 53209 : Determination of Swelling Degree of Paint Coatings
DIN 53356 Tear: Strength “C” Block Method, Tongue Method, Trapezoid, Method, Trouser Method
DIN 53357; Adhesion: Test / Peel
DIN 53377 Shrinkage/ : Dimensional Stability
DIN 53530, Adhesion: Test / Peel
DIN 53892-2 Shrinkage/ : Dimensional Stability
DIN 67530 : Refractometers as a Tool for the Evaluation of Gloss of Paint Coatings and Flat Surfaces of Plastics
DIN 75220 : Aging of Automotive Components in Solar Simulation Units
DIN EN ISO : 11664-4 Colorimetry – Part 4: CIE 1976 L*a*b* Color Space
DIN EN ISO 105-X12 : Determination of Abrasion Resistance of Colored Textiles
DIN EN ISO 11664-4 : Colorimetry – Part 4: CIE 1976 L*a*b* Color Space
DIN EN ISO 13937-2 : Tear Strength “C” Block Method, Tongue Method, Trapezoid, Method, Trouser Method
DIN ISO 4649 : Rubber, Vulcanized or Thermoplastic - Determination of Abrasion Resistance Using a Rotating Cylindrical Drum Device
EC 60068-2-1; GB/T 2423.1; : Test A: Cold (Temperature ≥ -40°C)
ECE Methods R1, Photometry: Measurements – Headlights and Front Lighting Devices Photometry
ECE Methods R112; : Photometry Measurements – Headlights and Front Lighting Devices Photometry
ECE Methods R19, : Photometry Measurements – Headlights and Front Lighting Devices Photometry
ECE Methods R20, : Photometry Measurements – Headlights and Front Lighting Devices Photometry
ECE Methods R23, : Photometry - Backlighting, Signaling, Warning, LED Marking Devices, Cargo Lights and Reflex
ECE Methods R3, : Photometry - Backlighting, Signaling, Warning, LED Marking Devices, Cargo Lights and Reflex
ECE Methods R38, : Photometry - Backlighting, Signaling, Warning, LED Marking Devices, Cargo Lights and Reflex
ECE Methods R7, : Photometry - Backlighting, Signaling, Warning, LED Marking Devices, Cargo Lights and Reflex
ECE Methods R8, : Photometry Measurements – Headlights and Front Lighting Devices Photometry
ECE Methods R87, : Photometry Measurements – Headlights and Front Lighting Devices Photometry
ECE Methods R91; : Photometry – Backlighting, Signaling, Warning, LED Marking Devices, Cargo Lights and Reflex
ECE Methods R98, : Photometry Measurements – Headlights and Front Lighting Devices Photometry
ECE Methods R99, : Photometry Measurements – Headlights and Front Lighting Devices Photometry
ECE R10 Annex 4, 5 : Measurement Method of Broadband/Narrowband Electromagnetic Emissions from Vehicles
ECE R10 Appendix 6: Method for Testing Vehicles Immunity to Electromagnetic Radiation
ECE-42 Buffer : Pendulum/Barrier Impact (1 to 12) mph pulses Pendulum/vehicle mass 9.800 lb (-40 to 85) ºC sample conditioning 1000 frames per second using three high speed video cameras
EIA-364-26B : Salt Spray (fog) Ambient up to 90 °C
EIAJ ED-4701/200 : Temperature and Humidity Temperature: -70 °C to 180 °C Humidity: 10%RH to 95%RH
Electrical Appliances and Materials Safety Act (3-31-86 in Japan): Ball Pressure Test
EMC-CS-2010 JLR V1.2 : Over/Under, Reverse, Jump Start, Faulty Regulator Voltages, electrical stress
EMC-CS-2010 JLR V1.2 (RI115) : Handheld Transmitter Immune Exposure
EMC-CS-2010 JLR V1.2 CI210 : Automotive EMC Tests Immunity to Voltage Surges, Supply Voltage Line Disturbances (Spills, Drops, Start, Ramp Up/Down)
EMC-CS-2010 JLR V1.2 CI220 : Automotive EMC Tests Immunity to Voltage Surges, Supply Voltage Line Disturbances (Spills, Drops, Start, Ramp Up/Down)
EMC-CS-2010 JLR V1.2 CI230 : Automotive EMC Tests Immunity to Voltage Surges, Disturbances of Supply Voltage Lines (Losses, Drops, Crank, Ramp Up/Down)
EMC-CS-2010 JLR V1.2 CI250 : Automotive EMC Tests Immunity to Voltage Surges, Supply Voltage Line Disturbances (Spills, Drops, Start, Ramp Up/Down)
EMC-CS-2010 JLR V1.2 CI265 : Automotive EMC Tests Immunity to Voltage Surges, Supply Voltage Line Disturbances (Spills, Drops, Start, Ramp Up/Down)
EMC-CS-2010 JLR V1.2 CI270 : Automotive EMC Tests Immunity to Voltage Surges, Supply Voltage Line Disturbances (Spills, Drops, Start, Ramp Up/Down)
EMC-CS-2010 JLR V1.2 RI130 : Automotive EMC Tests Immunity to Voltage Surges, Disturbances of Supply Voltage Lines (Losses, Drops, Crank, Ramp Up/Down)
EMC-CS-2010 JLR V1.2 RI150 : Automotive EMC Tests Immunity to Voltage Surges, Disturbances of Supply Voltage Lines (Losses, Drops, Crank, Ramp Up/Down)
EMC-CS-2010JLR V1.2 : Bulk Current Injection (BCI) – Substitution Method
EMC-CS-2010JLR V1.2 : Automotive EMC Tests RF Conducted Emissions
EMC-CS-2010JLR V1.2 (RI140) : Power Frequency Magnetic Field Immunity
EN 13523-14 : Chalking (Helmet Method)
EN 300 220-1 / -2: Radio
EN 300 328 (Excluding Adaptability test): Radio
EN 300 330-1 / -2: Radio
EN 300 440-1 / -2: Radio
EN 55011 (2009+A1:2010, 2016) : Transmitted and Radiated
EN 55013 (2013+A1:2016) : Transmitted and Radiated
EN 55014-1 (2006, 2006+A1:2009, 2006+A2:2011) : Transmitted and Radiated
EN 55015 (2006+A2:2009) : Transmitted and Radiated
EN 55022 (1994+A1:1995+A2:1997, 1998+A1:2000+A2:2003,2006+A1:2007, 2010+AC:2011) : Transmitted and Radiated
EN 55032 (2015+Revision 2016) : Transmitted and Emitted
EN 60598-2-1 (1989): LITE
EN 60598-2-12 (2013): LITE
EN 60598-2-20 (2010): LITE
EN 60598-2-3 (2011): LITE
EN 60598-2-4 (1998): LITE
EN 60598-2-6 (1995): LITE
EN 60950-1 (Annex A1) : Combustion Test Using 127 mm Flame Source Used in Electrical Equipment Evaluations
EN 60950-1 (Annex A2) : Combustion Test Using 20 mm Flame Source Used in Electrical Equipment Evaluations
EN 60950-1 (Section 1.7.11) : Endurance of Marking Test
EN 60950-1 (Section 4.5.5): Ball Pressure Test
EN 60950-1 (Section 4.2.1 – 4.2.4): Constant Force Test
EN 60950-1 (Section 4.7.3.1 – 4.7.3.6): Horizontal Combustion Foam Material Test
EN 61000-3-11 (2000) : Vibration
EN 61000-3-2 (2014): Harmonics
EN 61000-3-3 (2013) : Vibration
EN 61000-4-8; IEC 61000-4-8 : Power Frequency Magnetic Field Immunity
EN 61000-6-2 (2005) : Conducted and Radiated
EN 61000-6-3 (2007+A1:2011+A2:2012) : Transmitted and Radiated
EN 61000-6-4 (2007+A1:2011) : Transmitted and Radiated
EN 61010-1 (Section 10.5.3): Ball Pressure Test
EN 61010-1 (Section 5.3) : Endurance of Marking Test
EN 61010-1 (Section 8.1.1) : Constant Force Test
ES-6S43-3K171-AB : Axial and Bending Monotonic Test
ES-7L14-3K185/6 : Axial and Bending Fatigue Test
ES-9L34-3K185/6 : Axial and Bending Monotonic Test
ES-9S43-4A492-A : Axial and Bending Monotonic Test
ES-AV61-3K171-BAA : Axial and Bending Monotonic Test
ESB-M9P4-A-19782 : (Extended) Rubber Parts – Migration Painting vs. Paint
ES-XW7T-1A278-AC (RI 114) : Shielded Enclosure with Absorbent Coating (80 MHz - 4,2 GHz, up to 200 V/meter) Displacement Method and Metallic Table Top
ETSI EN 300 086-1: Radio Communications
ETSI EN 300 086-2: Radio Communications
ETSI EN 300 113-1: Radio Communications
ETSI EN 300 113-2: Radio Communications
ETSI EN 300 197: Radio Communications
ETSI EN 300 198: Radio Communications
ETSI EN 300 219-1: Radio Communications
ETSI EN 300 220-1: Radio Communications
ETSI EN 300 220-2: Radio Communications
ETSI EN 300 220-3: Radio Communications
ETSI EN 300 224-2: Radio Communications
ETSI EN 300 279: Radio Communications
ETSI EN 300 296-1: Radio Communications
ETSI EN 300 296-2: Radio Communications
ETSI EN 300 328: Radio Communications
ETSI EN 300 328-1: Radio Communications
ETSI EN 300 328-2: Radio Communications
ETSI EN 300 330-1: Radio Communications
ETSI EN 300 330-2: Radio Communications
ETSI EN 300 341-2: Radio Communications
ETSI EN 300 385: Radio Communications
ETSI EN 300 390-1: Radio Communications
ETSI EN 300 390-2: Radio Communications
ETSI EN 300 394-1: Radio Communications
ETSI EN 300 422-2: Radio Communications
ETSI EN 300 431: Radio Communications
ETSI EN 300 440-1: Radio Communications
ETSI EN 300 440-2: Radio Communications
ETSI EN 300 454-2: Radio Communications
ETSI EN 300 471-2: Radio Communications
ETSI EN 300 630: Radio Communications
ETSI EN 300 633: Radio Communications
ETSI EN 300 639: Radio Communications
ETSI EN 300 674-1: Radio Communications
ETSI EN 300 674-2-1: Radio Communications
ETSI EN 300 674-2-2: Radio Communications
ETSI EN 300 718-2: Radio Communications
ETSI EN 300 761-1: Radio Communications
ETSI EN 300 761-2: Radio Communications
ETSI EN 301 021: Radio Communications
ETSI EN 301 126-1: Radio Communications
ETSI EN 301 126-2-1: Radio Communications
ETSI EN 301 126-2-2: Radio Communications
ETSI EN 301 126-2-3: Radio Communications
ETSI EN 301 126-2-4: Radio Communications
ETSI EN 301 126-2-5: Radio Communications
ETSI EN 301 126-2-6: Radio Communications
ETSI EN 301 126-3-1: Radio Communications
ETSI EN 301 166-2: Radio Communications
ETSI EN 301 178-2: Radio Communications
ETSI EN 301 213-1: Radio Communications
ETSI EN 301 213-2: Radio Communications
ETSI EN 301 213-3: Radio Communications
ETSI EN 301 213-4: Radio Communications
ETSI EN 301 213-5: Radio Communications
ETSI EN 301 357-1: Radio Communications
ETSI EN 301 357-2: Radio Communications
ETSI EN 301 390: Radio Communications
ETSI EN 301 406 : Radiocommunication (Digital Wireless Communication Devices – DECT Devices) Standard 2007;
ETSI EN 301 489-1: Radio Communications
ETSI EN 301 489-10: Radio Communications
ETSI EN 301 489-12: Radio Communications
ETSI EN 301 489-17: Radio Communications
ETSI EN 301 489-2: Radio Communications
ETSI EN 301 489-20: Radio Communications
ETSI EN 301 489-23: Radio Communications
ETSI EN 301 489-24: Radio Communications
ETSI EN 301 489-25: Radio Communications
ETSI EN 301 489-26: Radio Communications
ETSI EN 301 489-28: Radio Communications
ETSI EN 301 489-3: Radio Communications
ETSI EN 301 489-31: Radio Communications
ETSI EN 301 489-33: Radio Communications
ETSI EN 301 489-4: Radio Communications
ETSI EN 301 489-5: Radio Communications
ETSI EN 301 489-6: Radio Communications
ETSI EN 301 489-7: Radio Communications
ETSI EN 301 489-8: Radio Communications
ETSI EN 301 489-9: Radio Communications
ETSI EN 301 511: Radio Communications
ETSI EN 301 751: Radio Communications
ETSI EN 301 753: Radio Communications
ETSI EN 301 783-2: Radio Communications
ETSI EN 301 796: Radio Communications
ETSI EN 301 797: Radio Communications
ETSI EN 301 840-2: Radio Communications
ETSI EN 301 843-1: Radio Communications
ETSI EN 301 893: Radio Communications
ETSI EN 301 908-1: Radio Communications
ETSI EN 301 908-10: Radio Communications
ETSI EN 301 908-12: Radio Communications
ETSI EN 301 908-14: Radio Communications
ETSI EN 301 908-15: Radio Communications
ETSI EN 301 908-16: Radio Communications
ETSI EN 301 908-17: Radio Communications
ETSI EN 301 908-18: Radio Communications
ETSI EN 301 908-19: Radio Communications
ETSI EN 301 908-2: Radio Communications
ETSI EN 301 908-3: Radio Communications
ETSI EN 301 908-4: Radio Communications
ETSI EN 301 908-5: Radio Communications
ETSI EN 301 908-6: Radio Communications
ETSI EN 301 908-7: Radio Communications
ETSI EN 301 908-8: Radio Communications
ETSI EN 301 908-9: Radio Communications
ETSI EN 302 065: Radio Communications
ETSI EN 302 186: Radio Communications
ETSI EN 302 208-1: Radio Communications
ETSI EN 302 208-2: Radio Communications
ETSI EN 302 217-2-2: Radio Communications
ETSI EN 302 217-3: Radio Communications
ETSI EN 302 217-4-2: Radio Communications
ETSI EN 302 288-2: Radio Communications
ETSI EN 302 291-2: Radio Communications
ETSI EN 302 326-2: Radio Communications
ETSI EN 302 326-3: Radio Communications
ETSI EN 302 502: Radio Communications
ETSI EN 302 544-1: Radio Communications
ETSI EN 302 544-2: Radio Communications
ETSI ETS 300 329: Radio Communications
ETSI ETS 300 445 + A1: Radio Communications
ETSI ETS 300 446: Radio Communications
ETSI ETS 300 487 + A1: Radio Communications
FED-STD-141, : (Method 6301) Wet Tape Adhesion Test
Fiat 50451-2009 : (Method A) Accelerated Aging by Atmospheric Agents
Fiat 50451-2009(Method-A) : Accelerated Aging by Atmospheric Agents
Fiat 50471-2000 : Alternative Ultraviolet Radiation/Moisture Resistance Test
Fiat 990110 01 (2007) : Over/Under, Back, Jump Start, Faulty Regulator Voltages, electrical stress
Fiat 990111 01 (2010) : Over/Under, Back, Jump Start, Faulty Regulator Voltages, electrical stress
FLTM AN 101-01 : Paint Transfer – Color Bleeding
FLTM BI 103-01 : Salt Spray Resistance Test for Painted Panels and Parts
FLTM BI 110-01 : Measuring the Gloss of Paint Panels FLTM (Ford Laboratory Test Methods) BI (Paints and Solvents, Physical Test Method):
FLTM BI 160-01 : Florida Outdoor Exposure, FLTM (Ford Laboratory Test Methods) BI (Paints and Solvents, Physical Test Method):
FLTM BI-160-01 : Florida and Arizona Outdoor Exposure , FLTM (Ford Laboratory Test Methods)
FLTM BN 102-01 : Cold Cracking/ Flexibility
FLTM BN 102-01 Bending/ : Impact
FLTM BN 103-01 : Stain Resistance
FLTM BN 105-01 : Shrinkage/ Dimensional Stability
FLTM BN 105-03 : Shrinkage/ Dimensional Stability
FLTM BN 107-01 : Crushing
FLTM BN 108-02: Wear Linear Taber
FLTM BN 108-10 : Crushing
FLTM BN 112-08 : Cleanability
FLTM BN 151-05; Adhesion Test/ : Peel
FLTM BO 101-01 : Resistance to Artificial Weathering
FLTM BO 116-01 : Exposure of Interior Trim Materials in a Controlled Radiation Water-Cooled Xenon-Arc Apparatus
FLTM BO 131-01: Fragrance
FLTM BO 131-03: Fragrance
FLTM DVM-0020 : AVT Material, Fasteners and Corrosion Protection Engineering Design Verification Method (DVM)
FMVSS : 302 Flammability of Automotive Interior Materials (49 CFR 571.302): Rate of Combustion
FMVSS 108 : Plastic Optical Materials (S14.4.2)
FMVSS 302 : Flammability
FMVSS 571.108 S10.18 : Aiming and Adjustment Range – Headlight Photometrics
FMVSS 571.108 S14.2.5, : Photometry Measurements – Photometry of Headlights and Front Lighting Devices
FMVSS 571.108 S14.2; : Photometry – Backlighting, Signaling, Warning, LED Marking Devices, Cargo Lights and Reflex
FMVSS 571.108 S14.5.3 : Environmental Dust
FMVSS 571.108 S14.6. : Humidity 7; Moisture Corrosion/Environmental Simulation
FMVSS 571.108 S14.6.1; : Wear Environmental
FMVSS 571.108 S14.6.2; : Chemical Resistance Environmental Simulation
FMVSS 571.108 S14.6.4, S14.5.4; : Corrosion, Salt Spray Environment Simulation:
FMVSS 571.108 S14.6.5 : Dust Environment
FMVSS 571.108 S14.6.6; : Bulk Current Injection (BCI) Substitution Method
FMVSS 571.108 S14.6.8, S14.5.1; : Vibration (Slam Bang)-Speed 750 cpm, Height at 3 mm, Force (270 to 310) N Environmental Simulation
FMVSS 571.108 S14.8.7; : Photometry Measurements – Headlights and Front Lighting Devices Photometry
FMVSS 571.108 S7.8 : Aiming and Adjustment Range – Headlight Photometrics
FMVSS 571.108 S8.1 (10/2007), : Photometry Measurements – Photometry of Headlights and Front Lighting Devices
FMVSS 581 : Buffer Pendulum/Barrier Effect (1 to 12) mph pulses Pendulum/vehicle mass 9.800 lb (-40 to 85) ºC sample conditioning 1000 frames per second using three high speed video cameras
FMVSS-302 : Flammability of Interior Materials – Passenger Cars, Multi-Purpose Passenger Cars, Trucks and Buses
Ford 00.00-L-3190 : Cyclic Corrosion Chrysler Temperature: -20 °C to 90 °C Delphi DX900115 Humidity: 10%RH to 100%RH
Ford CETP 00.00-L-467 LP-463PB-22-01 : Cyclic Corrosion Chrysler Temperature: -20 °C to 90 °C Delphi DX900115 Humidity: 10%RH to 100%RH
Ford EMC CS 2009.1 : Automotive EMC Tests RF Radiated Emissions
Ford EMC CS 2009.1 (RI 114) : Shielded Enclosure with Absorbent Stripe (80 MHz - 4,2 GHz, up to 200 V/meter) Displacement Method and Metallic Table Top
Ford EMC CS 2009.1 (RI 115) : Handheld Transmitter Immune Exposure
Ford EMC CS CI210 : Automotive EMC Tests Immunity to Voltage Fluctuations, Supply Voltage Line Disturbances (Spills, Drops, Start, Ramp Up/Down)
Ford EMC CS CI220 : Automotive EMC Tests Immunity to Voltage Surges, Supply Voltage Line Disturbances (Spills, Drops, Starting, Ramp Up/Down)
Ford EMC CS CI230 : Automotive EMC Tests Immunity to Voltage Fluctuations, Supply Voltage Line Disturbances (Losses, Drops, Starting, Ramp Up/Down)
Ford EMC CS CI250 : Automotive EMC Tests Immunity to Voltage Surges, Supply Voltage Line Disturbances (Spills, Drops, Starting, Ramp Up/Down)
Ford EMC CS CI260 : Automotive EMC Tests Immunity to Voltage Fluctuations, Supply Voltage Line Disturbances (Spills, Drops, Start, Ramp Up/Down)
Ford EMC CS CI270 : Automotive EMC Tests Immunity to Voltage Fluctuations, Supply Voltage Line Disturbances (Spills, Drops, Start, Ramp Up/Down)
Ford EMC CS RI130 : Automotive EMC Tests Immunity to Voltage Surges, Supply Voltage Line Disturbances (Losses, Drops, Cranking, Ramp Up/Down)
Ford EMC CS RI150 : Automotive EMC Tests Immunity to Voltage Fluctuations, Supply Voltage Line Disturbances (Spills, Drops, Start, Ramp Up/Down)
Ford EMC-CS-2009.1 : Over/Under, Back, Jump Start, Faulty Regulator Voltages, electrical stress
Ford EMC-CS-2009.1 (RI140) : Power Frequency Magnetic Field Immunity
Ford ES-XW7T-1A278 –AB/ AC : Bulk Current Injection (BCI) –Substitution Method
Ford ES-XW7T-1A278-AB/AC : Over/Under, Reverse, Jump Start, Faulty Regulator Voltages, electrical stress
Ford ES-XW7T-1A278-AC : Electrostatic Discharge (ESD) Immunity
Ford FLTM BI 010-02 : Measuring the Change in Gloss of Flat Enamels After Polishing
Ford FLTM BI 103-01 : Salt Spray (fog) Ambient up to 90 °C
Ford FLTM BI 104-01 : Immersion in Water
Ford FLTM BI 110-01 : Measuring the Gloss of Paint Panels
Ford FLTM BI 123-01 : Cyclic Corrosion Chrysler Temperature: -20 °C to 90 °C Delphi DX900115 Humidity: 10%RH to 100%RH
Ford FLTM BI 123-02 : Cyclic Corrosion Chrysler Temperature: -20 °C to 90 °C Delphi DX900115 Humidity: 10%RH to 100%RH
Ford FLTM BI 123-03 : Cyclic Corrosion Chrysler Temperature: -20 °C to 90 °C Delphi DX900115 Humidity: 10%RH to 100%RH
Ford FLTM BN 107-01 : Crash Test – Interior Trim Materials
Ford FLTM BO 101-01 : Resistance to Artificial Weathering Fuji TS420-1-12 (2002)
Ford FLTM BO 116-01 : Resistance to Indoor Weather Conditions
Ford FLTM BQ 104-02 : Temperature and Humidity Temperature: -70 °C to 180 °C Humidity: 10%RH to 95%RH
Ford GMW 3259 : Fungus/Mold
Ford WSB-M1P83-B1 Div. 3.8.2 : Thermal Shock -68 °C to 175 °C
Ford WSB-M3G-102-B/B2-20072,3.11(Extended) : Painting: Low Density Polyvinyl Chloride Foam Pressure Sensitive, Supersoft/Tape, Low Density Polyvinyl Chloride/Nitrile Foam Pressure Sensitive, Ultra Soft
Ford WSS-M15P32-D1 : Heat Aging (Exposure, Deterioration)
Ford WSS-M15P37-B1 : Heat Aging (Exposure, Deterioration)
Ford WSS-M15P44-B1 : Heat Aging (Exposure, Deterioration)
Ford WSS-M15P6-D1 : Heat Aging (Exposure, Deterioration)
Ford WSS-M15P6-D1 Environmental : Air Conditioning
Ford WSS-M2P177-A1-5 Ch. 3.5.7 : Temperature -68 °C to 175 °C
Ford WSS-M2P184-A Sec. 3.6.7 & 3.6.8 : Temperature -68 °C to 175 °C
Ford WSS-M5G52-B1 : Heat Aging (Exposure, Deterioration)
Ford WSS-M8P16-B : Bending / Impact
Ford WSS-M8P16-B1 : Heat Aging (Exposure, Deterioration)
Ford WSS-M99D63-A31 : Heat Aging (Exposure, Deterioration)
Ford WSS-M99P32-C (Section 3.11): Moisture Content/Water Absorption/Thickness Swelling
Ford WSS-M99P32-C1 : Heat Aging (Exposure, Deterioration)
Ford WSS-M99P32-C1 Environmental : Air Conditioning
FTMS 141C-86(Methods,6101.1.6103 : 6104,) 60°,85°,20°Specular Luminosity
GB 4343.1 (2003) : Transmitted and Emitted
GB 8410 : Flammability
GB 9254 (2008) : Transmitted and Emitted
GM 214M2(Withdrawn-2013) : Table 2 (3.1.3) Table 1, 2, 3 and 4 (3.1.2 – 3.1.4) Engine Intake Manifold and Throttle Body Gaskets
GM 4298P : Salt Spray Test
GM 9071P : Tape Adhesion Test for Paint Surfaces
GM 9071P1 : Tape Adhesion Test for Paint Surfaces
GM 9125P : Procedures for Laboratory Accelerated Exposure of Automotive Materials
GM 9163P : Outdoor Decomposition of Automotive Exterior Materials
GM 9163P1 : Outdoor Decomposition of Automotive Exterior Materials
GM 9193P; Adhesion : Test/ Peel
GM 9327P : Outdoor Weather Resistance of Integrated Colored Plastics
GM 9327P1Exterior : Weather Resistance of Integrated Colored Plastics
GM 9538P : Weathering Exposure Tests for Interior Flooring
GM 9540P : Accelerated Corrosion Test
GM 9736P-882(Withdrawn-2011) : Sulfur Dioxide Spot Test-
GM 9771P : Fiber Decay of Automotive Textiles (excluding cylinder per GM drawing FBRD001.dwg)
GM Method GMN 3128 TP 4.3.6; : Aiming and Adjustment Range – Headlight Photometrics
GM Method SSTS 6.3.2.2 : Thermal Shock Corrosion/Environmental Simulation
GM Methods GMN 3148 : Wear Environmental
GM Methods GMN 3148 4.3.12, : Photometry Measurements – Photometrics of Headlights and Front Lighting Devices
GM Methods GMN 3148 4.3.13; : Photometry Measurements – Headlights and Front Lighting Devices Photometry
GM Methods GMN 3148 TP 4.3.27; : Chemical Resistance Environmental Simulation
GM Methods GMN 8020 : Vibration (Sine, Random, Shock)-22,2 kN (5000 Pound Force), (10 to 3000) Hz, 50 mm (2 in) displacement peak to peak
GM Methods GMN 8020 TP 3.3.1.3.3, 3.3.1.3.6; : Thermal Cycling, Environmental Chamber Corrosion/Environmental Simulation
GM Methods TP 4.3.1; : Vibration (Sine, Random, Shock)-22,2 kN (5000 Pound Force), (10 to 3000) Hz, 50 mm (2 inch) peak to peak displacement force
GM Methods TP 4.3.26 : Wear Environmental
GM3148 TP 4.3.24; : Moisture Corrosion/Environmental Simulation
GM3628M(3.12)2(valid-2015) : Submersible
GM4298P(Replaced 2011) : Salt Spray (fog) Ambient up to 90 °C
GM4372M Part. 3.5.22 : Thermal Shock -68 °C to 175 °C
GM4465P(current 2015) : Temperature and Humidity Temperature: -70 °C to 180 °C Humidity: 10%RH to 95%RH
GM4466P(valid-2015) : Submersible
GM4486P2(Withdrawn-2011) : Ozone Resistance Test of Elastomer Compounds
GM9033P-86 2, (Retracted 2013) : Determination of Color Fastness to Cracking (Friction) Test
GM9125P2 : (Withdrawn 2013) Procedures for Laboratory Accelerated Exposure of Automotive Materials
GM9240P-882(Withdrawn-2013): Sweating Resistance
GM9317P : Water Repellency Test-
GM9317P Water : Repellency Test-
GM9505P Cycles A-O2(current-2012) : Cyclic Corrosion Chrysler Temperature: -20 °C to 90 °C Delphi DX900115 Humidity: 10%RH to 100%RH
GM9511P2(current-2013) : Cyclic Corrosion Chrysler Temperature: -20 °C to 90 °C Delphi DX900115 Humidity: 10%RH to 100%RH
GM9514P(inactive-2011) : Submersible
GM9517P-882(Withdrawn-2012) : Synthetic Perspiration Resistance
GM9540P2(current-2013) : Cyclic Corrosion Chrysler Temperature: -20 °C to 90 °C Delphi DX900115 Humidity: 10%RH to 100%RH
GM9619P2(current-2012) : Cyclic Corrosion Chrysler Temperature: -20 °C to 90 °C Delphi DX900115 Humidity: 10%RH to 100%RH
GM9635P : Dust outlet
GM9689-952(Taken-2014) : Asphalt Painting Test-
GM9902P : Non-Contact Dyeing Measurement of Elastomers (Xenon-Arc)
GM9904P : (Inactive) Multi-Axis Impact Test
GM9904P (Inactive) : Multi-Axis Impact Test
GME 60292 : Determination of Color Fastness and Resistance to Artificial Light
GME 60410 : Immersion in Water
GMN 3148 TP 4.3.28, 4.3.29; : Thermal Cycling, Environmental Chamber Corrosion/Environmental Simulation
GMN10033-042(Withdrawn-2011) : Sunscreen Lotion Resistance of Indoor Coatings
GMN8170-022(Withdrawn-2014) : Resistance to Blocking
GMW 140692(Withdrawn-2011) : Migration of PVC with Other Materials – Bleeding Resistance and Contact Stain Compatibility
GMW 14093 (Method C) : Cold Break/ Flexibility
GMW 14102 : Determination of the Water Spotting Test-
GMW 14108 Cold : Cracking / Flexibility
GMW 14124 (Cycle M) : Environmental Conditioning
GMW 14124 (R Cycle) : Environmental Conditioning
GMW 14125 (A2X2, BX2) : Wear Linear Taber
GMW 14129 (Chapter 3.3.3) : Paint Transfer – Color Bleeding
GMW 14131 : Compatibility of Interior Flooring Materials with Amines
GMW 14141 : Paint Migration
GMW 14162 : (Method A, B or D) Color Fastness to Artificial Weathering
GMW 14162(Method A, B or D) : Color Fastness to Artificial Weathering
GMW 141941 Heat : Aging (Exposure, Deterioration)
GMW 14296 : Sweating Resistance
GMW 14444 : Material-Related Internal Performance (Section 3.3.3.3)
GMW 14445 : Insect and Insect Repellent Resistance
GMW 14650, : 4.11 Compatibility
GMW 14695, Adhesion : Test/ Peel
GMW 14743, : Table 1 Elastomer for Wiper Blades – Paint Painting
GMW 14829 : Tape Adhesion Test for Finished Paint
GMW 14864 : Procedure for Determining Trim Staining
GMW 14873 : Outdoor Weathering of Automotive Exterior Materials (Section 6.2 Excluding Hardness)
GMW 157571 Environmental : Conditioning
GMW 16381 Moisture : Content/ Water Absorption/ Thickness Swelling
GMW 163811 Adhesion : Test/ Peel
GMW 163811 Heat : Aging (Exposure, Deterioration)
GMW 16596(Chapter 3.4.2.3) : Cleanability
GMW 165961 Cold : Cracking/ Flexibility
GMW 165961 Environmental : Conditioning
GMW 30261 Environmental : Conditioning
GMW 3097 (2004/2006/2012): Immunity Conducted on Signal Lines
GMW 3097, Chapter 3.5.2, 3.5.3, 3.5.4, 3.5.5 : Conducted Immunity Supply Voltage transients on power lines
GMW 3172 (2012) : Over/Under, Reverse, Jump Start, Faulty Regulator Voltages, electrical stress
GMW 3205 : Fragrance
GMW3208; : Wear Linear Taber
GMW 3221 (Code A) : Environmental Conditioning
GMW 3232 : Flammability
GMW 3235 : Fogging Properties of Trim Materials
GMW 3235 (Method A) : Fogging Gravimetric Photometric
GMW 3235 (Method B) : Fogging Gravimetric Photometric
GMW 3274 : Pile Distortion (Crockmeter Method)
GMW 3326 Tear : Strength “C” Block Method, Tongue Method, Trapezoid, Method, Trouser Method
GMW 3387 : Procedure for Determining Fiber Degradation of Automotive Textiles
GMW 3402 : Cleanability
GMW 3414 : Artificial Weathering of Automotive Interior Upholstery Materials
GMW 3417 : Natural Weathering Exposure Tests for Interior Floors/Materials
GMW 4217 Shrinkage/ : Dimensional Stability
GMW14162 : Color Fastness to Artificial Weathering
GMW141961 Heat : Aging (Exposure, Deterioration)
GMW14444-Part 4.4.2, : Material-Related Internal Performance
GMW14729(Option A) : Temperature and Humidity Temperature: -70 °C to 180 °C Humidity: 10%RH to 95%RH
GMW14829 : Tape Adhesion Test for Paint Surfaces
GMW14872 : Cyclic Corrosion Chrysler Temperature: -20 °C to 90 °C Delphi DX900115 Humidity: 10%RH to 100%RH
GMW14873 : Outdoor Decomposition of Automotive Exterior Materials
GMW14906-07, 09 : Vibration (Sine, Random, Shock)-22,2 kN (5000 Pound Force), (10 to 3000) Hz, 50 mm (2 in) displacement peak to peak
GMW14988 : Axial Braking and Bending Fatigue Test
GMW15181 : Panic Brake Axial and Flexural Fatigue Test
GMW15182 : Steering Arm Axial and Bending Fatigue Test
GMW15183 : Axial Bending and Fatigue Test
GMW15536 : J-Turn Axial and Flexural Fatigue Test
GMW165961 Adhesion : Test/ Peel
GMW3044Sect 3.4 : Salt Spray (fog) Ambient up to 90 °C
GMW3097 (2004/2006/2012) Section 3.4.2 : Shielded Enclosure with Absorbent Coating (80 MHz - 4,2 GHz, up to 200 V/meter) Displacement Method and Metallic Table Top
GMW3172 Cyclic : Corrosion Chrysler Temperature: -20 °C to 90 °C Delphi DX900115 Humidity: 10%RH to 100%RH
GMW3232 : Flammability: Horizontal Burning Rate of Automotive Materials
GMW3235 (Method A) : Salt Spray (fog) Ambient - 90 °C
GMW3286 Salt : Spray (fog) Ambient up to 90 °C
GMW3414 Artificial : Weathering of Automotive Interior Upholstery Materials
GMW4700 Section 3.4 : Salt Spray (fog) Ambient up to 90 °C
GR-1089-CORE, Issue 4, Chapter 3.2 : Radiated and Conducted Emissions (1m semi-anechoic chamber up to 3 GHz)
GR-1221-CORE : TNAM Standard Test Method (internal)-High Temperature Storage Test (Moist Heat) STM 167
GR-326-CORE : TNAM Standard Test Method (internal)-Post-Condensation Thermal Cycling STM 164
HKCA 1001, Issue 5 (2010) : Radio Communications
HKCA 1002, Issue 5 (2003) : Radio Communications
HKCA 1002, Issue 6 (2008) : Radio Communications
HKCA 1003, Issue 4 (2003): Radio Communications
HKCA 1004, Issue 4 (2003) : Radio Communications
HKCA 1005, Issue 4 (2003) : Radio Communications
HKCA 1005, Issue 5 (2008): Radio Communications
HKCA 1006, Issue 3 (2003) : Radio Communications
HKCA 1007, Issue 5 (2012) : Radio Communications
HKCA 1008, Issue 4 (2013) : Radio Communications
HKCA 1010, Issue 1 (2003) : Radio Communications
HKCA 1015, Issue 4 (2003) : Radio Communications
HKCA 1016 Issue 4 (2007): Radio Communications
HKCA 1016, Issue 3 (2003) : Radio Communications
HKCA 1019, Issue 3 (2011) : Radio Communications
HKCA 1020, Issue 6 (2007) : Radio Communications
HKCA 1020, Issue 7 (2011) : Radio Communications
HKCA 1022, Issue 3 (2003) : Radio Communications
HKCA 1026, Issue 3 (2003) : Radio Communications
HKCA 1026, Issue 3 (2010) : Radio Communications
HKCA 1027, Issue 2 (2003) : Radio Communications
HKCA 1029, Issue 3 (2004) : Radio Communications
HKCA 1030, Issue 4 (2004) : Radio Communications
HKCA 1031, Issue 3 (2004) : Radio Communications
HKCA 1032, Issue 4 (2004) : Radio Communications
HKCA 1033, Issue 7 (2012) : Radio Communications
HKCA 1034, Issue 2 (2003) : Radio Communications
HKCA 1034, Issue 3 (2009) : Radio Communications
HKCA 1035, Issue 7 (2011) : Radio Communications
HKCA 1036, Issue 3 (2011) : Radio Communications
HKCA 1037, Issue 3 (2011) : Radio Communications
HKCA 1039, Issue 6 : Radio Communications
HKCA 1039, Issue 6 (2015) : Radio Communications
HKCA 1041, Issue 1 (2003) : Radio Communications
HKCA 1042, Issue 2 (2003) : Radio Communications
HKCA 1043, Issue 4 (2008) : Radio Communications
HKCA 1044, Issue 1 (2003) : Radio Communications
HKCA 1045, Issue 1 (2003): Radio Communications
HKCA 1046, Issue 3 (2008): Radio Communications
HKCA 1047, Issue 2 (2008): Radio Communications
HKCA 1048, Issue 2 (2008) : Radio Communications
HKCA 1049, Issue 1 (2005): Radio Communications
HKCA 1050, Issue 1 (2006) : Radio Communications
HKCA 1051, Issue 2 (2010) : Radio Communications
HKCA 1052, Issue 2: Radio Communications
HKCA 1052, Issue 2 (2008): Radio Communications
HKCA 1053, Issue 1 (2008): Radio Communications
HKCA 1054, Issue 1 (2008): Radio Communications
HKCA 1056, Issue 1 (2011) : Radio Communications
HKCA 1057, Issue 1 (2011) : Radio Communications
HKCA 1061, Issue 1 (2011) : Radio Communications
HKCA 1063, Issue 1 (2013) : Radio Communications
HKCA 1064, Issue 1 (2013) : Radio Communications
HKCA 1065, Issue 2 (2013) : Radio Communications
HKCA 1066, Issue 1 (2013) : Radio Communications
HKCA 1067, Issue 1 (2013) : Radio Communications
HKCA 1068, Issue 1 (2014) : Radio Communications
HKCA 1069, Issue 1 (2014) : Radio Communications
HKCA 1070, Issue 1 (2014) : Radio Communications
HKCA 1071, Issue 1 (2014) : Radio Communications
HKCA 1072, Issue 1 (2015) : Radio Communications
HKCA 1073, Issue 1 (2015) : Radio Communications
HKCA 1218, Issue 1 (1999) : Radio Communications
HKCA 1223, Issue 1 (1997) : Radio Communications
HKCA 1224, Issue 1 (1997) : Radio Communications
HKCA 1225, Issue 1 (1997) : Radio Communications
HKCA 1257, Issue 1 (1997) : Radio Communications
HKCA 1258, Issue 1 (1999) : Radio Communications
HKCA 1259, Issue 1 (1997) : Radio Communications
HKCA 1260, Issue 1 (1999) : Radio Communications
HKCA 1261, Issue 1 (1998) : Radio Communications
HKCA 1262, Issue 1 (1998) : Radio Communications
HKCA 1263, Issue 1 (1999) : Radio Communications
HKCA 1264, Issue 1 (1999) : Radio Communications
HKCA 1265, Issue 1 (1999): Radio Communications
HKCA 1266, Issue 1 (1999) : Radio Communications
HKCA 1277, Issue 1 (1999) : Radio Communications
HKCA 1281, Issue 1 (1997) : Radio Communications
HKCA 1282, Issue 1 (1997) : Radio Communications
HKCA 1283, Issue 1 (2014) : Radio Communications
Honda 5100Z-SG0-A000 : Submersible
Honda 7794Z_S3V_0000 : Over/Under, Reverse, Quick Start, Faulty Regulator Voltages, electrical stress
Honda 7794Z-S3V-0000 : Conducted Immunity to Power lines Supply Voltage transients
Honda HES D2003 : Cyclic Corrosion Chrysler Temperature: -20 °C to 90 °C Delphi DX900115 Humidity: 10%RH to 100%RH
Honda HES D2500 (3.12.1) : Light Resistance Test
Honda HES D2500-10 : (Sections 3.12.1b and 3.12.2 Light Resistance/Weather Resistance – Resin Materials for Vehicles
Honda HES D2500-10 (Sections 3.12.1b and 3.12.2): Light Resistance/Weather Resistance – Resin Materials for Vehicles
Honda HES D6001 Div. 4.3 : Salt Spray (fog) Ambient up to 90 °C
Honda HES D6001 Div. 4.4.1 : Temperature -68 °C to 175 °C
Honda HES D6001 Div. 4.4.4 : Thermal Shock -68 °C to 175 °C
Honda HES D6001-04A : Cyclic Corrosion Chrysler Temperature: -20 °C to 90 °C Delphi DX900115 Humidity: 10% RH to 100% RH
Honda HES D6501 Div. 3.15.1 : Salt Spray (fog) Ambient up to 90 °C
Honda HES D6501 Div. 3.15.2 : Salt Spray (fog) Ambient up to 90 °C
Honda HES D6501 Div. 3.16.1 : Filiform Procedures AC Temperature: -70 °C to 175 °C, Humidity: 10%RH to 95%RH
Honda HES D6501 Div. 3.18 : Immersion in Water
Honda HES D6501 Div. 3.19 : Temperature and Humidity Temperature: -70 °C to 180 °C Humidity: 10%RH to 95%RH
Honda HES D6501 Div. 3.20.1 : Temperature -68 °C to 175 °C
Honda HES D6501 Div. 3.20.2 : Temperature -68 °C to 175 °C
Honda HES D6501 Div. 3.29 : Thermal Shock -68 °C to 175 °C
Honda HES D6501 Div. 3.37 : Immersion in Water
Honda HES D6601-99 : Accelerated Test Method for Light Resistance with Xenon-Arc Lamp Hyundia/Kia MS 210-05 (2006) (Chapter 4.5) Fading Resistance Test – Molded Plastic Parts (Internal Use)
Honda HES D6602 : D8N Cyclic Corrosion Chrysler Temperature: -20 °C to 90 °C Delphi DX900115 Humidity: 10%RH to 100%RH
Honda HES-D2500-08(Section 3.10) : Gloss Test
Hyundai/KIA MS 260-13, Section 4.8 (2005): Staining Resistance Test-
Hyundai MS 600-66 : Cyclic Corrosion Chrysler Temperature: -20 °C to 90 °C Delphi DX900115 Humidity: 10%RH to 100%RH
Hyundai/Kia ES 96200-00 : Over/Under, Reverse, Quick Start, Faulty Regulator Voltages, electrical stress
Hyundia/Kia MS 210-05 (2006) (Chapter 4.5) : Fading Resistance Test – Molded Plastic Parts (Interior Use)
ICES-001, Issue 4 (2006) : Conducted and Disseminated
ICES-003, Issue 6 (January 2016): Transmitted and Disseminated
ICES-005, Issue 3 (2009) : Conducted and Disseminated
ICES-006, Issue 2 (2009) : Conducted and Disseminated
IDA TS 3G-BS (2009) : Radio Communication
IDA TS 3G-MT, Issue 1, Rev 1(2009) : Radio Communications
IDA TS AR, Issue 1, Rev 1 (2011) : Radio Communications
IDA TS CBS, Issue 1 (2011): Radio Communications
IDA TS CDMA 1900 (1999) : Radio Communications
IDA TS CMT, Issue 1 (2011) : Radio Communications
IDA TS CT-CTS, Issue 1, Rev 1 (2006): Radio Communications
IDA TS CT-CTS, Issue 1, Rev 2 (2011): Radio Communications
IDA TS GMPCS, Issue 1, Rev 3 (2011) : Radio Communications
IDA TS GSM-BS, Issue 1, Rev 1 (2009): Radio Communications
IDA TS GSM-MT, Issue 1, Rev 1 (2009): Radio Communications
IDA TS LMR, Issue 1, Rev 5 (2014): Radio Communications
IDA TS RPG, Issue 1 (2005): Radio Communications
IDA TS RPG, Issue 1, Rev 1 (2011): Radio Communications
IDA TS SRD (2009): Radio Communications
IDA TS SRD, Issue 1, Rev 7 (2013) : Radio Communications
IDA TS UWB, Issue 1 (Rev 1, 2012): Radio Communications
IDA TS UWB, Issue 1, Rev 1 (2011) : Radio Communications
IDA TS WBA, Issue 1 (June 2005): Radio Communications
IDA TS WBA, Issue 1, Rev 1 (2011) : Radio Communications
IDA TS WSD, Issue 1 (March 2016): Radio Communications
IEC 1646 : Solar Panel Test Temperature: -70 °C to 180 °C Humidity: 10%RH to 95%RH
IEC 60068 : Operating Temperature
IEC 60068-2-11; GB/T 2423.17: Test Status: Salt Mist
IEC 60068-2-14 (except Test Nc); GB/T 2423.22 : Test N: Temperature Change (Temperature -40°C to 150°C)
IEC 60068-2-2; GB/T 2423.2 : Sn. 3172 of GMW 8.4.2 Test B: Dry Heat (Temperature ≤ 150°C)
IEC 60068-2-27; GB/T 2423.5; Singing. 3172 to 9.3.2 of GMW 9.3.4 : Test Ea and Guidance: Shock
IEC 60068-2-30; GB/T 2423.4 : Test Db: Moist Heat, Cyclic (12h + 12h Cycle) (Relative Humidity ≤ 85%)
IEC 60068-2-38; GB/T 2423.34; Singing. 3172 of GMW 9.4.5: Test Z/AD: Compound Temperature/Humidity Cyclic Test (Relevant Humidity ≤ 85%)
IEC 60068-2-52; GB/T 2423.18; Singing. 3172 of GMW 9.4.7: Test Kb: Salt Mist, Cyclic (sodium, chloride solution)
IEC 60068-2-6; GB/T 2423.10 : Fc Test: Vibration (sinusoidal)
IEC 60068-2-64; GB/T 2423.56; Singing. 3172 to 9.3.1.2 of GMW 9.3.1.5 : Test Fh: Vibration, Broadband Random and Guidance
IEC 60068-2-78 : Solar Panel Test Temperature: -70 °C to 180 °C Humidity: 10% RH to 95% RH
IEC 60068-2-78; GB/T 2423.3; Singing. 9.4.6 of GMW 3172 : Test Cabinet: Humid Heat, Steady State (Relevant Humidity ≤ 85%)
IEC 60335-1, 60695-10-2 : UL 746A (Part 30); Ball Pressure Test
IEC 60598-1 (2008 2014): LITE
IEC 60598-2-12 (2013): LITE
IEC 60598-2-17 (1984+A2:1990) : LITE
IEC 60598-2-20 (2014): LITE
IEC 60598-2-3 (2011): LITE
IEC 60598-2-6 (1994+A1:1996) : LITE
IEC 60698-11-10 : 50W Horizontal and Vertical Flame Test Methods
IEC 60950-1 (Annex A1) :
IEC 60950-1 (Annex A2) : Combustion Test Using 20 mm Flame Source Used in Electrical Equipment Evaluations
IEC 60950-1 (Section 1.7.11) : Endurance of the Marking Test
IEC 60950-1 (Section 4.5.5) : Ball Pressure Test
IEC 60950-1 (Part 4.2.1 – 4.2.4) : Constant Force Test
IEC 61000-3-11 (2000) : Vibration
IEC 61000-3-2 (2014): Harmonics
IEC 61000-3-3 (2013) : Vibration
IEC 61000-4-2 (2009-05) : Electrostatic Discharge (ESD) Immunity
IEC 61000-6-2 (2005) : Conducted and Radiated
IEC 61000-6-3 (2011) : Conducted and Radiated
IEC 61000-6-4 (2011) : Conducted and Radiated
IEC 61000-6-5 (2015-08) : Conducted and Radiated
IEC 61010-1 (Section 10.5.3) : Ball Pressure Test
IEC 61010-1 (Section 5.3) : Endurance of the Marking Test
IEC 61010-1 (Section 8.1.1) : Constant Force Test
IEC 61850-3 (2013-12) : Transmitted and Radiated
IEC 68-2-11 : Salt Spray (fog) Ambient up to 90 °C
Part of IEC 82/576. 7 : Salt Spray (fog) Ambient up to 90 °C
IEC60068 : Salt Spray (fog) Ambient up to 90 °C
IEEE 1613 (2009) : Transmitted and Emitted
IEEE 1613-1 (2016) : Transmitted and Emitted
IEEE 1613a (2011): Transmitted and Emitted
IEEE C37.90.3 (2001) : Electrostatic Discharge (ESD) Immunity
IEEE C63.17 (2006) : Transmitted and Emitted
IEEE STD C37.90.2 : Spread Immunity
IIHS Pad : Test Protocol Pad Pendulum/Barrier Impact (1 to 12) mph pulses Pendulum/vehicle mass 9.800 lb (-40 to 85) ºC sample conditioning 1000 frames per second using three high speed video cameras
IIHS Low: Rapid Crash TestBumper Pendulum/Barrier Impact (1 to 12) mph pulses Pendulum/vehicle mass 9.800 lb (-40 to 85) ºC sample conditioning 1000 frames per second using three high speed video cameras
IP6K Acc DIN40050-9; : Dust Environment
IPC-A-600 : Acceptability of Printed Circuit Boards (all parts) Solder Coatings: Solder Thickness Holes: Nodules, Gaps, Removed Areas, Surface Coating Solder Mask: Registration, Ball Grid Array (BGA), Adhesion Pattern Definition: Conductor Width, Conductor Spacing, Annular Ring Dielectric Materials: Dielectric Thickness, Etching, Delamination, Blister Conductor Models: Surface Conductor Thickness, Through-holes Coated Foil Thickness (PTH): Copper Coating Thickness, Roving, Vias, Cracks, Inner Layer Separation (IP Separation), Hole Thickness Solderability: Thermal Stress, Solder Shock ISO 37 Tensile Properties of Rubber ISO 48 International Hardness (IRHD): Rubber Micro-Hardness (Type M)
IPC-TM-650 (Section 2.4.18.3) : Tensile Impact Test
IQS-12001 Test Station STM 106 : Single Mode Optical Measurements with TNAM Standard Test Method (internal)-EXFO
ISO 105 A02 : Gray Scale to Evaluate Color Change
ISO 105, : part B03 Color Fastness to Weather: Outdoor Exposure
ISO 105/A02 : Gray Scale to Evaluate Color Change
ISO 105/A04 : Instrumental Evaluation Method of Dyeing Degree of Adjacent Fabrics
ISO 105-A02 : Color Fastness to Artificial Light
ISO 105-A02 AATCC : Evaluation, Procedure2 Color Evaluation
ISO 105-B02 : Artificial Color Fastness
ISO 105-B04 : Color Fastness to Artificial Weathering
ISO 105-B05 : Detection and Evaluation of Photochromism
ISO 105-B06 : Color Fastness to Artificial Light at High Temperatures
ISO 105-B06 (Condition 3, 4 5 or 6) : Color Fastness at High Temperatures and Aging in Artificial Light: Xenon Arc Fading Lamp Test
ISO 105-G02 : Textile - Color Fastness Tests - Color Fastness to Burnt Gas Fumes
ISO 105-X12 (DIN EN ISO 105-X12): Impact
ISO 10605 (2001) : Electrostatic Discharge (ESD) Immunity
ISO 10605 Electrostatic: Discharge (ESD)
ISO 1133 : Melt Flow Rate: Melt Mass Flow Rate (MFR), Melt Volume Flow Rate (MVR)
ISO 1133-1 : Determination of Melt Mass Flow Rate (MFR) and Melt Volume Flow Rate (MVR) of Thermoplastics
ISO 11341-2004 2: (Extended) Paints and Varnishes - Artificial Weathering and Artificial Radiation Exposure - Filtered Xenon-Arc Radiation Exposure
ISO 11341-2004 2 (Retracted): Paints and Varnishes - Artificial Weathering and Artificial Radiation Exposure - Filtered Xenon-Arc Radiation Exposure
ISO 11357 : Differential Scanning Calorimetry (DSC)
ISO 11358 : Thermogravimetric Analysis (TGA)
ISO 11359 : Thermomechanical Analysis (TMA)
ISO 11452-1 (2001, 2002, 2004, 2005): Radiation Immunity
ISO 11452-10 (2009) : Automotive EMC
ISO 11452-2 (2004) : Shielded Enclosure with Absorbent Coating (80 MHz - 4.2 GHz, up to 200 V/meter) Displacement Method and Metallic Table Top
ISO 11452-2 Absorber Coated : Shielded Enclosure (ALSE) Radar Pulse up to 600 V/m only
ISO 11452-2 Absorbent Lined Shielded: Enclosure (ALSE) Metallic Bench Only 200 MHz to 4 GHz, up to 200 V/m
ISO 11452-3 (2001) : Transverse Electromagnetic (TEM) Cell (200 V/m, up to 400 MHz)
ISO 11452-7 (2003) : Automotive EMC
ISO 11452-8 (2015) : Automotive EMC
ISO 11452-9 Portal Transmitters: Immunity
ISO 1183 (Method A): Density/ Specific Gravity
ISO 1183-1 : Density and Specific Gravity by Immersion
ISO 13937-2 Tear: Strength “C” Block Method, Tongue Method, Trapezoid, Method, Trousers Method
ISO 1431-1 : Rubber, Vulcanized or Thermoplastic - Resistance to Ozone Cracking - Static and Dynamic Strain Test
ISO 15701 : Leather – Color Fastness Tests – Color Fastness to Transition to Polymeric Material Nissan NES M0142-01 (Parts 18 and 19) Dyeing/Indirect Dyeing
ISO 16474-2 : Paints and Varnishes - Methods of Exposure to Laboratory Light Sources - Xenon-arc Lamps
ISO 16532(Extended-1993) : Vulcanized Rubbers - Determination of Compression Set Under Constant Deflection at Low Temperatures
ISO 16750-1:2007 : General and Product Specific Standards
ISO 16750-2 (2012) : Automotive EMC
ISO 16750-2 Executed: Temporary Immunity
ISO 16750-2:2010 : General and Product Specific Standards
ISO 16750-4:2010 : General and Product Specific Standards
ISO 178 : Determination of Flexural Properties
ISO 179-1 : Determination of Charpy Effect Properties
ISO 179-2 : Determination of Charpy impact properties – Instrument Impact Test
ISO 180 : Determination of Izod Impact Strength
ISO 180 Determination: Izod Impact Strength
ISO 1817 : Rubber, Vulcanized or Thermoplastic - Determination of the Effect of Liquids
ISO 1856, 3386-1 : Compression
ISO 188 : Rubber, vulcanized or thermoplastic - Accelerated Aging and Heat Resistance Tests
ISO 20433: Color Fastness to Breakage: Textile and Leather
ISO 23936-1 : Petroleum, Petrochemical and Natural Gas Industries - Non-Metallic Materials in Contact with Oil and Gas Production Environments - Thermoplastics
ISO 23936-2 : Petroleum, Petrochemical and Natural Gas Industries - Non-Metallic Materials in Contact with Oil and Gas Production Environments - Elastomers
ISO 2440 Environmental : Conditioning
ISO 2810 : Paints and Varnishes – Guidance Notes on Conducting Natural Weathering Tests
ISO 2812-2 : Immersion in Water
ISO 2813 : Measurement of Reflective Gloss of Non-Metallic Paint Films
ISO 293 : Pressure Molding of Test Samples of Thermoplastic Materials
ISO 293 Compression: Molding of Test Samples of Thermoplastic Materials
ISO 30013 : Rubber and Plastic Hoses - Methods of Exposure to Laboratory Light Sources - Determination of Changes in Color, Appearance and Other Physical Properties
ISO 306 : Vicat Softening Temperature (VST)
ISO 306 (Method,A120) : Determination of Vikat Softening Temperature
ISO 307 : Viscosity Polyamide Number: Dilute Solution Viscosity
ISO 3231 : Temperature: Ambient - 50 °C
ISO 3384-1 : Rubber, Vulcanized or Thermoplastic - Determination of Stress Relaxation in Compression
ISO 34-1 : Rubber, vulcanized or thermoplastic - Determination of Tear Strength - Trousers, Angle and Crescent Test Pieces
ISO 34-1 (Method B): Tear Strength “C” Block Method, Tongue Method, Trapezoid, Method, Trouser Method
ISO 34-2 : Rubber, Vulcanized or Thermoplastic - Determination of Tear Strength - Small (Delft) Test Pieces
ISO 3451-Method: Ash Content by Direct Calcination: Filling Content
ISO 37 : Rubber, Vulcanized or Thermoplastic - Determination of Tensile Stress-Strain Properties
ISO 37 Rubber, : Vulcanized or Thermoplastic - Determination of Tensile Stress-Strain Properties
ISO 3795 : Flammability
ISO 3795; JIS D1201 : Combustion Test of Automotive Interior Materials
ISO 3865 : Painting Methods in Contact with Rubber, Vulcanized or Thermoplastic - Organic Materials
ISO 4074 : Natural Rubber Latex Male Condoms - Requirements and Test Methods WHO 2004 Male Latex Condom
ISO 4577 : Thermal Oxidative Stability Microscopy Manual Light Microscopy: Image Analysis, Light Microscopy, Optical Microscopy
ISO 4582 : Determination of Changes in Color and Properties after Exposure to Sunlight Under Glass, Natural Weathering or Laboratory Light Sources
ISO 4628 : Paints and Varnishes - Evaluation of Deterioration of Paint Coatings - Size of Density Deterioration, Quality and General Defect Types
ISO 4662 (Pendulum method): Determination of Rebound Elasticity of Rubber Using Schob Pendulum
ISO 48 : Rubber, Vulcanized or Thermoplastic – Determination of Hardness (Hardness Between 10 IRHD and 100 IRHD)
ISO 48 Rubber, : Vulcanized or Thermoplastic - Determination of Hardness (Hardness Between 10 IRHD and 100 IRHD)
ISO 489 : Refractive Index: Refractive Index
ISO 4892-1 : Methods of Exposure to Laboratory Light Sources – General Guidance
ISO 4892-2 : Exposure to Laboratory Light Sources – Xenon-arc Lamps
ISO 4892-3 : Exposure to Laboratory Light Sources – Fluorescent UV Lamps
ISO 4892-4 : Exposure to Laboratory Light Sources - Open Flame Carbon Arc Lamps
ISO 527 : Tensile Properties: Tensile Strength, Tensile Elongation, Tensile Modulus, Poisson Ratio, Chord Modulus
ISO 527-1 : Plastics - Determination of Tensile Properties
ISO 5470-1; : Wear Linear Taber
ISO 6056 : Rubber, Vulcanized or Thermoplastic - Determination of Compression Stress Relaxation (Rings)
ISO 62 : Plastics-Water Absorption Determination
ISO 6270-1 : Temperature and Humidity Temperature: -70 °C to 180 °C Humidity: 10%RH to 95%RH
ISO 6270-2 : Procedure for exposing test specimens in condensate atmospheres
ISO 6383-1 : Film and Coating - Determination of Tear Resistance - Trouser Tear Method
ISO 6988 : Temperature: Ambient - 50 °C
ISO 7253 : Salt Spray (fog) Ambient up to 90 °C
ISO 75 : Deflection Temperature Under Load (DTUL, HDT)
ISO 75-1 : Determination of Deflection Temperature Under Load - General Test Method
ISO 75-2 : Determination of Deflection Temperature Under Load - Plastics and Ebonite
ISO 75-3 : Determination of Deflection Temperature Under Load - High Strength Thermoset Laminates and Long Fiber Reinforced Plastics
ISO 7637-2 : Conducted Transient Emissions1
ISO 7637-2 (2011) : Automotive EMC
ISO 7637-2; Transient Transmitted: Immune
ISO 7637-3; Transient Transmitted: Immune
ISO 815-1 : Determination of Compression Set at Ambient or High Temperatures
ISO 815-2 : Determination of Compression Set at Low Temperatures
ISO 868 : Hardness
ISO 868 (Types A and D): Plastics and Ebonite – Determination of Indent Hardness by Durometer (Shore Hardness)
ISO 877-1 : Plastics-Direct Weathering, Sunlight Weathering with Glass Filters, and Daylight Intensified Weathering Methods Using Fresnel Reflector (Method A, B)
ISO 877-2 : Direct Weather and Exposure Behind Window Glass
ISO 877-3 : Concentrated Weather Using Concentrated Solar Radiation
ISO 9073-4 Tear: Strength “C” Block Method, Tongue Method, Trapezoid, Method, Trousers Method
ISO 9227 : Salt Spray (fog) Ambient up to 90 °C
ISO/IEC 11452-4 : Bulk Current Injection (BCI) – Closed Loop
ISO/IEC 7637-1 and -2 : Automotive EMC Tests Conducted Transient Emissions
ISO11451-2 Method: Testing Vehicles Immunity to Electromagnetic Radiation
JASO M 305 : (Chapter 5.14) Flat Strips for Automobiles – Weatherproofing Test
JASO M 305 (Chapter 5.14) : Flat Strips for Automobiles – Weatherproofing Test
JASO M 346 : Xenon-Arc Lamp Light Exposure Test Method for Automotive Interior
JASO M351 : Automotive Parts - Xenon-Arc Lamp Accelerated Weathering Test Method for Exterior Parts
JASO M609 : Cyclic Corrosion Chrysler Temperature: -20 °C to 90 °C Delphi DX900115 Humidity: 10%RH to 100%RH
JASO M610: Salt Spray (fog) Ambient up to 90 °C
JIS B 7754 : Light Exposure and Light and Water Exposure Apparatus (Xenon-arc Lamp Type)
JIS B7753 : Light and Water Exposure Apparatus (Open Flame Sunlight Carbon Arc Type)
JIS C 1000-4-2 (1999): Electrostatic Discharge (ESD) Immunity
JIS C 1000-4-3 (1997): Spread Immunity
JIS C 61000-3-2 (2011): Harmonics
JIS C 61000-4-2 (2012) : Electrostatic Discharge (ESD) Immunity
JIS C 61000-4-3 (2012) : Spread Immunity
JIS D 0205 : Weathering Test Method for Automotive Parts
JIS D 0205 (Paragraph 2.2.2 and Table 1) : Weathering Test Method for Automotive Parts
JIS D0205 : Weatherability for Automotive Parts (excluding Section 7.5)
JIS H8502 Sec. 7.1 : Salt Spray (fog) Ambient up to 90 °C
JIS K 6251 : Rubber, Vulcanized or Thermoplastic – Determination of Tear Strength
JIS K 6251 : Rubber, Vulcanized or Thermoplastic – Determination of Tear Strength
JIS K 6253-2 : Rubber, Vulcanized or Thermoplastic – Determination of Hardness (Hardness Between 10 IRHD and 100 IRHD)
JIS K 7350-3 : Methods of Exposure to Laboratory Light Sources – Part 3: Fluorescent UV Lamps
JIS K6252 : Determination of Tensile Stress-Strain Properties of Rubber, Vulcanized or Thermoplastic
JIS K6257 : Rubber, Vulcanized or Thermoplastic - Determination of Heat Aging Properties
JIS K6258 : Rubber, Vulcanized or Thermoplastic – Determining the Effect of Liquids
JIS K6262 : Rubber, Vulcanized or Thermoplastic - Determination of Compression Set at Ambient, High or Low Temperatures
JIS K7110, K6911 (Section 5.21) : Izod Effect
JIS Z2371 : Salt Spray (fog) Ambient up to 90 °C
JIS Z2371 Part. 7.2.2 : Humidity: 10%RH to 100%RH JIS H8502 Sec. 7.2
K6911 (Section 5.20) : Charpy Impact Test
KN 11 (Annex 2) : Transmitted and Radiated
KN 14-1 (Annex 4) : Transmitted and Radiated
KN 15 (Annex 5) : Transmitted and Radiated
KN 301 489-1 (2008-5) (Annex 8-1) : Radio Communication
KN 301 489-17 (2008-5) (Annex 8-3) : Radio Communication
KN 301 489-24 (2008-5) (Annex 8-4) : Radio Communication
KN 301 489-7 (2008-5) (Annex 8-2) : Radio Communication
KN 32 (Annex 11) : Transmitted and Radiated
KN 61000-3-2 (Annex 1-11) : Harmonics
KN 61000-3-3 (Appendix 1-12) : Shivering
KN 61000-4-2 (Appendix 1-13) : Electrostatic Discharge (ESD) Immunity
KN 61000-4-3 (Annex 1-14) : Spread Immunity
Korea MIC Rule No. 179 : TCN 68-246 (2006); Radio Communication
LP-463kb-19-01 : Outdoor Exposure Trim Materials
Ingredients : Due to Sulfur Dioxide, SO2 and Hydrogen Sulfide, H2S
Mazda MCT-1M : Cyclic Corrosion Chrysler Temperature: -20 °C to 90 °C Delphi DX900115 Humidity: 10%RH to 100%RH
Mazda MCT-2M : Cyclic Corrosion Chrysler Temperature: -20 °C to 90 °C Delphi DX900115 Humidity: 10%RH to 100%RH
Mazda MES MN601 (13) : Submersible
MES PW 67602B (RI140) : Power Frequency Magnetic Field Immunity
MES PW 67602B CI210 : Automotive EMC Tests Immunity to Voltage Surges, Supply Voltage Line Disturbances (Spills, Drops, Cranking, Ramp Up/Down)
MES PW 67602B CI220 : Automotive EMC Tests Immunity to Voltage Surges, Supply Voltage Line Disturbances (Spills, Drops, Start, Ramp Up/Down)
MES PW 67602B CI230 : Automotive EMC Tests Immunity to Voltage Surges, Supply Voltage Line Disturbances (Spills, Drops, Cranking, Ramp Up/Down)
MES PW 67602B CI250 : Automotive EMC Tests Immunity to Voltage Surges, Supply Voltage Line Disturbances (Spills, Drops, Start, Ramp Up/Down)
MES PW 67602B CI260 : Automotive EMC Tests Immunity to Voltage Surges, Supply Voltage Line Disturbances (Spills, Drops, Cranking, Ramp Up/Down)
MES PW 67602B CI270 : Automotive EMC Tests Immunity to Voltage Surges, Supply Voltage Line Disturbances (Spills, Drops, Cranking, Ramp Up/Down)
MES PW 67602B CI290 : Automotive EMC Tests Immunity to Voltage Surges, Supply Voltage Line Disturbances (Spills, Drops, Cranking, Ramp Up/Down)
MES PW 67602B RI114 : Shielded Enclosure with Absorbent Coating (80 MHz - 4,2 GHz, up to 200 V/meter) Displacement Method and Metallic Table Top
MES PW 67602B RI130 : Automotive EMC Tests Immunity to Voltage Surges, Supply Voltage Line Disturbances (Spills, Drops, Cranking, Ramp Up/Down)
MES PW 67602B RI150 : Automotive EMC Tests Immunity to Voltage Surges, Supply Voltage Line Disturbances (Spills, Drops, Start, Ramp Up/Down)
MIL STD 601 (Method 7311) : Light Resist
MIL Std 810G Method 506 (Procedure 11) Only : Determining the Effects of Solar Radiation on Material
MIL Std. 601 (Method 7311) : Resist Light
MIL Std. 601(Method-7311) : Light Resistance
MIL-DTL-85052B(Chapter4.4.4.3.1) : General Specifications for Clamp, Ring, Cushion: Ultraviolet Exposure Navistar MPAPS GT-31 (Methods AF) Accelerated Decomposition of Non-Metallic Materials Polaris ENG-TST-10-026, Section 4.5 (2011) UV Test Procedure
MIL-PRF-81733 : Sealant Application Time: SEMCO Sealant Gun
MIL-STD 202G method 212A : Constant Acceleration Test Up to 20 G Crash Safety Test
MIL-STD 202G Sec. 101 : Salt Mist Chamber Test
MIL-STD 202G Sec. 103, 106 : Temperature Humidity Test
MIL-STD 202G Sec. 107 : Thermal Shock/ Temperature Cycle Temperature range: ( -65 to +150) °C
MIL-STD 202G Sec. 201, 204, 213, 214 : Shock and Vibration Test Using Electro Dynamic Shaker Random: Frequency Range: 10 Hz - 3.000 Hz Shock: 45g Sine: Frequency Range: 10 Hz - 3.000 Hz
MIL-STD 810E/F/G San. 501, 503, 520 : Thermal Shock/ Temperature Cycle Temperature range: ( -65 to +150) °C
MIL-STD 810E/F/G San. 502 : Temperature Test Temperature range: ( -65 to +150) °C
MIL-STD 810E/F/G San. 507 : Temperature Humidity Test
MIL-STD 810E/F/G San. 509 : Salt Mist Chamber Test
MIL-STD 810E/F/G San. 513 : Constant Acceleration Test Up to 20 G Crash Safety Test
MIL-STD 810E/F/G San. 514.5, 516, 519.5 : Shock and Vibration Test Using Electro Dynamic Shaker Random: Frequency Range: 10 Hz to 3.000 Hz Shock: 45g Sine: Frequency Range: 10 Hz to 3.000 Hz
MIL-STD 883G/H San. 1004 : Temperature Humidity Test
MIL-STD 883G/H San. 1009 : Salt Mist Chamber Test
MIL-STD 883G/H San. 2002, 2005, 2007 : Shock and Vibration Test Using Electro Dynamic Shaker Random: Frequency Range: 10 Hz to 3.000 Hz Shock: 45g Sine: Frequency Range: 10 Hz to 3.000 Hz
MIL-STD 883G/H, Sec. 1010 : Thermal Shock/ Temperature Cycle Temperature range: ( -65 to +150) °C
MIL-STD 883G/H, Sec. 1011 : Temperature Test Temperature range: ( -65 to +150) °C
MIL-STD-810 (Method 507) : Humidity, Humidity
MIL-STD-810 (Method 507.4); : Operating temperature
MIL-STD-810 (Methods 500, 501, 502, 503, 505, 506, 507, 509, 512, 521) : Environmental Test Methods and Engineering Guidelines
MIL-STD-810 (Methods 501.4, 502.4, 503.4): High/Low Temperature
MIL-STD-810G : Solar Radiation (Sunlight) - Steady State for Long Term Actinic Effects. Method 505.5, Procedure II
MIL-STD-810G Method 501.5, 502.5, 507.5 : Temperature -68 °C to 175 °C
MIL-STD-810G Method 507.5 : Temperature and Humidity Temperature: -70 °C to 180 °C Humidity: 10%RH to 95%RH
MIL-STD-810G Method 509.5 : Salt Spray (fog) Ambient up to 90 °C
MIL-T-4239A : Accelerated Aging
NACE TM0192 : Evaluation of Elastomeric Materials in Carbon Dioxide Decompression Environments
NES M0135 : Weathering and Light Resistance Test Methods for Synthetic Resin Parts
NES M0501 (Methods 4, 5 and 6) : Dyeing Test Methods for Rubber, Vulcanized or Thermoplastic
NES M7075, 7.16 : Weather Resistance
NHTSA-49CFR : Part 581 Bumper Pendulum/Barrier Strike (1 to 12) mph pulses Pendulum/vehicle mass 9.800 lb (-40 to 85) ºC sample conditioning 1000 frames per second using three high speed video cameras
Nissan : NES M0007(Methods,AandB) Test Method for Rubber Track Resistance Properties
Nissan 28401NDS02 [5] : Over/Under, Back, Jump Start, Faulty Regulator Voltages, electrical stress
Nissan 28401NDS02-4 : Automotive EMC Tests Immunity to Voltage Surges, Supply Voltage Line Disturbances (Losses, Drops, Starting, Ramp Up/Down)
Nissan CCT-I-NES M0158 : Cyclic Corrosion Chrysler Temperature: -20 °C to 90 °C Delphi DX900115 Humidity: 10%RH to 100%RH
Nissan CCT-IV – NES M0158 : Cyclic Corrosion Chrysler Temperature: -20 °C to 90 °C Delphi DX900115 Humidity: 10%RH to 100%RH
Nissan CCT-V – NES M0158 : Cyclic Corrosion Chrysler Temperature: -20 °C to 90 °C Delphi DX900115 Humidity: 10%RH to 100%RH
Nissan NES M0007(Methods,AandB): Test Method for Resistance Properties of Rubber Part
Nissan NES M0135 : Weathering and Light Resistance Test Methods for Synthetic Resin Parts (except 1-II-1B and 1-II-3) where air-cooled Xenon lamps are used
Nissan NES M0140 : Salt Spray (fog) Ambient up to 90 °C
NORSOK M-710 : Fast Gas Decompression Resistor
PF-11365 : Dashboard Module System Requirements (Section 3.1.7)
PLMN01 (2007, 2012) : Radio Communications
PLMN08 (2007, 2012) : Radio Communications
PLMN09 (2008, 2012) : Radio Communications
PSA B21 7110 (2008) : Conducted Immunity to Power lines Supply Voltage transients
PSA Peugeot–Citroen D27-1329-07 : Paint Coatings Rubbers and Plastics Artificial Weathering with Weatherometer
PV 3501, Rain Environmental : Simulation
PV 3900 : Smell
PV 3906 : Impact
PV 3919 : Compression
QCVN 10:2010/BTTT : Radio Communications
QCVN 11:2010/BTTT : Radio Communications
QCVN 12:2010/BTTT : Radio Communications
QCVN 13:2010/BTTT : Radio Communications
QCVN 15:2010/BTTT : Radio Communications
QCVN 17:2010/BTTT : Radio Communications
QCVN 18:2014/BTTT : Radio Communications
QCVN 54:2011/BTTT : Radio Communications
QCVN 55:2011/BTTT : Radio Communications
QCVN 65:2013/BTTT : Radio Communications
QV 41023 : Axial and Flexural Fatigue Test
Renault 36-00-808 : Over/Under, Back, Jump Start, Faulty Regulator Voltages, electrical stress
Renault D17-1058/J : Salt Spray (fog) Ambient up to 90 °C
Renault D17-1686/E : Salt Spray (fog) Ambient up to 90 °C
Renault D27 1911 D-07 : Rubbers and Plastics, Paint Coatings Artificial Aging Using Weatherometer
Renault ECC1 D172028 : Cyclic Corrosion Chrysler Temperature: -20 °C to 90 °C Delphi DX900115 Humidity: 10%RH to 100%RH
RSS-210 (excluding DFS test): RSS-247;Radio
RTCA DO-160 D, E, F, G San. 4.0 : Temperature Test Temperature range: ( -65 to +150) °C
RTCA DO-160 D, E, F, G San. 5.0 : Thermal Shock/ Temperature Cycle Temperature range: ( -65 to +150) °C
RTCA DO-160 D, E, F, G San. 6.0 : Temperature Humidity Test
RTCA DO-160 D, E, F, G San. 7.0 : Constant Acceleration Test Up to 20G Crash Safety Test
RTCA DO-160 D, E, F, G San. 7.0, 8.0 : Shock and Vibration Test Using Electro Dynamic Shaker Random: Frequency Range: 10 Hz to 3.000 Hz Shock: 45g Sine: Frequency Range: 10 Hz to 3.000 Hz
RTCA DO-160, D, E, F, G Sec. 4.0 : Altitude Test (-1.500 - 100.000) Foot Temperature -65 C - +150 C
RTCA/DO-160D : Salt Spray (fog) Ambient up to 90 °C
SAE 575-70, 88, 92, 04; Corrosion, : Salt Spray Environmental Simulation:
SAE J1113/1_201310 : Automotive EMC
SAE J1113/11_201201 : Automotive EMC
SAE J1113/12_200608 : Automotive EMC
SAE J1113/13_201502 : Automotive EMC
SAE J1113/26_201404 : Automotive EMC
SAE J1113/4_201404 : Automotive EMC
SAE J1113-11; SAE J1113-12 : SAE J1113-42;Conducted Immunity Supply Voltage transients on power lines
SAE J1113-41 : RF Conducted Emissions
SAE J1127 : Battery Cable Test (Excluding Ozone):Outer Diameter, Wall Thickness, Winding, Wire Coating, Solderability, Mechanical Properties, Dielectric, Cold Bending, Flame Propagation Resistance, Fluid Compatibility, Hot Water Resistance, Insulation Volume Resistivity, Temperature and Humidity bike
SAE J1128 : Primary Cable Test (Excluding Ozone):Outer Diameter, Wall Thickness, Wrap, Wire Coating, Solderability, Mechanical Properties, Dielectric, Cold Bending, Flame Propagation Resistance, Fluid Compatibility, Compression Resistance, Abrasive Wear Resistance, Cross-linking, Strip Force, Hot Water Resistance, Insulation Volume Resistivity, Temperature and Humidity Cycle
SAE J1326 : Test Method for Measuring Wet Color Transfer Properties
SAE J1351: Fragrance
SAE J1352 : Compression
SAE J1389 : Corrosion
SAE J1530 : Beard / Stuck
SAE J1530 (excluding Part 5); : Wear Linear Taber
SAE J1545 : Instrumental Color Difference Measurement for Exterior Cladding, Textiles and Colored Flooring (A)
SAE J1756 : Salt Spray (fog) Ambient up to 90 °C
SAE J1756 Fogging : Gravimetric Photometric
SAE J1767 : Instrumental Color Difference Measurement of Color Fastness of Automotive Interior Upholstery Materials
SAE J1885-05 : Accelerated Exposure of Automotive Interior Trim Components
SAE J18852 (Retracted 2008) : Accelerated Exposure of Automotive Interior Trim Components Using a Controlled Radiation Water-Cooled Xenon-Arc Apparatus
SAE J1960-04 : Accelerated Exposure of Automotive Exterior Materials Using a Controlled Radiation Water-Cooled Xenon-Arc Apparatus
SAE J19602 (Taken 2008) : Accelerated Exposure of Automotive Exterior Materials Using a Controlled Radiation Water-Cooled Xenon-Arc Apparatus
SAE J1961 : Accelerated Exposure of Automotive Exterior Materials Using Solar Fresnel Reflector Apparatus
SAE J1976 : Outdoor Decomposition of Outdoor Materials
SAE J2020 : Accelerated Exposure of Automotive Exterior Materials Using Fluorescent UV and Condensation Apparatus
SAE J2027 (Section 5.2.8) : Standard for Protective Caps for Gasoline Fuel Line Pipes, Chemical Resistance (Xenon-Arc)
SAE J2045 : Leak Test Microflow, Mass Extraction
SAE J2236 : Determination of Continuous Upper Temperature Resistance of Elastomers
SAE J2283 : Wheel Nut Protection Test
SAE J2334 : Cyclic Corrosion Chrysler Temperature: -20 °C to 90 °C Delphi DX900115 Humidity: 10%RH to 100%RH
SAE J2334:20032 : Laboratory Cyclic Corrosion Test
SAE J2412 : Accelerated Exposure of Automotive Interior Trim Components (Xenon-Arc)
SAE J2527 : Accelerated Exposure of Automotive Exterior Materials (Xenon-Arc)
SAE J2587 : Leak Test Microflow, Mass Extraction
SAE J2973 : Leak Test Microflow, Mass Extraction
SAE J322 : Non-Metallic Trim Materials – Test Method for Determining Dyeing Resistance to Hydrogen Sulfide Gas
SAE J323 (Mandrel Method A) : Cold Break/ Flexibility
SAE J369 : Flammability
SAE J419 : Decarburization
SAE J423 : Measuring Case Depth
SAE J576 : Plastic Materials for Use in Optical Components such as Lenses and Reflectors of Motor Vehicle Lighting Devices. Optical and Chromaticity Measurements Performed in Atlas (DSET) (Sections 4.4 and 5.2.2).
SAE J578 : Color Specification
SAE J861 : Impact
SAE J883 Shrinkage/ : Dimensional Stability
SAE Methods J1319-93; : Photometry – Backlighting, Signaling, Warning, LED Marking Devices, Cargo Lights and Reflex
SAE Methods J1383-90 : Photometry Measurements – Photometry of Headlights and Front Lighting Devices
SAE Methods J1735-95 : Photometry Measurements – Photometry of Headlights and Front Lighting Devices
SAE Methods J1889-93; : Photometry – Backlighting, Signaling, Warning, LED Marking Devices, Cargo Lights and Reflex
SAE Methods J2009-93 : Photometry Measurements – Photometry of Headlights and Front Lighting Devices
SAE Methods J2087-91 : Photometry Measurements – Photometry of Headlights and Front Lighting Devices
SAE Methods J222-70; : Photometry – Backlighting, Signaling, Warning, LED Marking Devices, Cargo Lights and Reflex
SAE Methods J575-04 : Photometry Measurements – Photometry of Headlights and Front Lighting Devices
SAE Methods J575-04; : Photometry – Backlighting, Signaling, Warning, LED Marking Devices, Cargo Lights and Reflex
SAE Methods J575-70 : Photometry Measurements – Photometry of Headlights and Front Lighting Devices
SAE Methods J575-70, : Photometry - Backlighting, Signaling, Warning, Marking LED Devices, Cargo Lights and Reflex
SAE Methods J575-80 : Photometry Measurements – Photometry of Headlights and Front Lighting Devices
SAE Methods J575-88, : Photometry - Backlighting, Signaling, Warning, Marking LED Devices, Cargo Lights and Reflex
SAE Methods J575-92 : Photometry Measurements – Photometry of Headlights and Front Lighting Devices
SAE Methods J575-92, : Photometry - Backlighting, Signaling, Warning, Marking LED Devices, Cargo Lights and Reflex
SAE Methods J583-93 : Photometry Measurements – Photometry of Headlights and Front Lighting Devices
SAE Methods J585-02; : Photometry – Backlighting, Signaling, Warning, LED Marking Devices, Cargo Lights and Reflex
SAE Methods J586-84; : Photometry – Backlighting, Signaling, Warning, LED Marking Devices, Cargo Lights and Reflex
SAE Methods J588-94; : Photometry – Backlighting, Signaling, Warning, LED Marking Devices, Cargo Lights and Reflex
SAE Methods J592-94; : Photometry – Backlighting, Signaling, Warning, LED Marking Devices, Cargo Lights and Reflex
SAE Methods J593 95; : Photometry – Backlighting, Signaling, Warning, LED Marking Devices, Cargo Lights and Reflex
SAE Methods J594-95; : Photometry – Backlighting, Signaling, Warning, LED Marking Devices, Cargo Lights and Reflex
SAE Methods J595-90; : Photometry – Backlighting, Signaling, Warning, LED Marking Devices, Cargo Lights and Reflex
SAE Methods J852-65 : Photometry Measurements – Photometry of Headlights and Front Lighting Devices
SAE575-70, 88, 92, 04; : Dust Environment
SAE575-70, 88. : Vibration (Slam Bang) - Speed 750 cpm, Height at 3mm, Force (270 - 310) N Environmental Simulation
SAE575-92,-04 : Vibration (Sine, Random, Shock) to 22,2 kN (5000 Pound Force), (10 to 3000) Hz, 50 mm (2 in) displacement peak to peak
SAE-AMS-STD 753C Method 101 : Temperature and Humidity Temperature: -70 °C to 180 °C Humidity: 10%RH to 95%RH
SDS DVM-0002-BP : Solar Load Buffer Solar Load Resistor,
SDS DVM-0005-BP : Bumper Amb Operating Temperature, Environmental Conditioning Temperature and Humidity Temperature: (-70 to 180) ºC Humidity: (10 to 95) % RH
SDS DVM-0008-BP(Snow : Bank) Bumper Pendulum/Barrier Impact (1 to 12) mph pulses Pendulum/vehicle mass 9.800 lb (-40 to 85) ºC sample conditioning Using three high speed video cameras 1000 frames per second
SDS DVM-0009-BP : Step Surface Loading, Custom-made mechanical loop Static loading up to 35.000 lbs with deflection measurement Load: 50.000 psi Displacement: 6 inches
SDS DVM-0010-BP(IIHS) : Bumper Pendulum/Barrier Impact (1 to 12) mph pulses Pendulum/vehicle mass 9.800 lb (-40 to 85) ºC sample conditioning Using three high speed video cameras 1000 frames per second
SDS DVM-0011-BP : Step Pad Friction Customer-specific friction coefficient and torque measurements up to 22 ft-lbs
SDS DVM-0012-RG : Replace Extraction Grille Coefficient of friction and torque measurements up to 22 ft-lbs as per customer requirement
SDS DVM-0013-BP(N-American-Passenger Cars) : Bumper Pendulum/Barrier Effect (1 to 12) shaft strokes Pendulum/vehicle mass 9.800 lb (-40 to 85) ºC sample conditioning 1000 per second using three high speed video cameras square
SDS DVM-0013-RG : Grid Deviation,
SDS DVM-0017-RG : Stroke Grille Preload Customer requirement-mechanical loop Static loading up to 35.000 lbs with deflection measurement Load: 50.000 psi Displacement: 6 inches
SDS DVM-0018-BP (K-American-Trucks) : Bumper Pendulum/Barrier Impact (1 to 12) mph pulses Pendulum/vehicle mass 9.800 lb (-40 to 85) ºC sample conditioning 1000 using three high speed video cameras frame every second
SDS DVM-0020-EX : Outdoor Lamp Deflection Method, as per customer requirement-mechanical loop Static loading up to 35.000 lbs with deflection measurement Load: 50.000 psi Displacement: 6 inches
SDS DVM-0021-BP (N.American-MPVs-and-SUVs) : Bumper Pendulum/Barrier Strike (1 to 12) mph pulses Pendulum/vehicle mass 9.800 lb (-40 to 85) ºC sample Conditioning Three high speed video cameras using 1000 frames per second
SDS DVM-0022-BP (EEC-Australia-and-Japan) : Buffer Pendulum/Barrier Effect (1 to 12) mph effects Pendulum/vehicle mass 9.800 lb (-40 to 85) ºC sample conditioning Three high speed video cameras using 1000 frames per second
SDS DVM-0027 (Cold Impact, -18ºC): Bumper Pendulum/Barrier Impact (1 to 12) mph pulses Pendulum/vehicle mass 9.800 lb (-40 to 85) ºC sample conditioning 1000 frames per second using three high speed video cameras
SDS DVM-0028 (Cold Impact, -20ºC): Bumper Pendulum/Barrier Impact (1 to 12) mph pulses Pendulum/vehicle mass 9.800 lb (-40 to 85) ºC sample conditioning 1000 frames per second using three high speed video cameras
SDS DVM-0035-BP : Firm Feel, S Customer-required-mechanical loop Static loading up to 35.000 lbs with deflection measurement Load: 50.000 psi Displacement: 6 inches
SDS DVM-0048-0R : Solar Load Extorn Solar Load Resistor,
SDS DVM-0050-0R : Spoiler Deviation, Customer-required mechanical loop Static loading up to 35.000 lbs with deflection measurement Load: 50.000 psi Displacement: 6 inches
SDS DVM-0050-OR : Spoiler Deviation, Environmental Conditioning Temperature and Humidity Temperature: (-70 to 180) ºC Humidity: (10 to 95) % RH
SDS DVM-5958: Running Board As per customer requirement - mechanical loop Static loading up to 35.000 lbs with deflection measurement Load: 50.000 psi Displacement: 6 inches
SEM Guide : Scanning Electron Microscope (SEM) Shock Manual Shock, Mechanical
SSTS 3.1.3.1Thermal : Cycling, Environmental Chamber.3, Thermal Cycle, Environmental Chamber Corrosion/Environmental Simulation
SSTS 3.1.3.4.1; GMW14906-07, 09; : Corrosion/Environmental Simulation
STM 062 : TNAM Standard Test Method (internal)-AMOMS Optical Tracking
Suzuki SES N3292-00 : Weatherability and Light Resistance Test Methods for Plastic Parts
TCVN 7189 (2009) : Transmitted and Emitted
TCVN 7317 (2003) : Transmitted and Emitted
TEC-EMI-TEL-001-01 (February 09) : Transmitted and Emitted
TL 1010 DIN 75200 : Flammability
TL 52094 (3.18) : Shrinkage/ Dimensional Stability
TL 52094 (3.19) : Moisture Content/ Water Absorption/ Thickness Swelling
TL 52094 (3.21) : Cleanability
TL 52306 (7.13) : Environmental Conditioning
TL 52306 (7.4, 7.5) : Shrinkage / Dimensional Stability
TL 52306 (7.4.1, 7.4.3) : Heat Aging (Exposure, Deterioration)
TL 52411 (6) : Adhesion Test/Peeling
TL 52411 (6,7) : Shrinkage/ Dimensional Stability
TL 52411 (9) : Environmental Conditioning
TL 52463 (3.1.2, 3.2.2, 3.3.2, 7.4) : Shrinkage/Dimensional Stability
TL 52499 (7.7, 7.8) : Shrinkage / Dimensional Stability
909-05 par. 4, 5 : Photometry Measurements – Headlights and Front Lighting Devices Photometry
909-05 par. 4.18 : Aiming and Adjustment Range – Headlight Photometrics
TL909-05 para.4.9, Rain : Environmental Simulation
TL909-05 para. 4.13; Corrosion, : Salt Spray Environmental Simulation:
TL956:2001-06 para.5.2 : Rain Environmental Simulation
Toyota TS C5209G : Cyclic Corrosion Chrysler Temperature: -20 °C to 90 °C Delphi DX900115 Humidity: 10%RH to 100%RH
Toyota TS K6532G : Cyclic Corrosion Chrysler Temperature: -20 °C to 90 °C Delphi DX900115 Humidity: 10%RH to 100%RH
Toyota TSH 1505G W3044 : Temperature and Humidity Temperature: -70 °C to 180 °C Humidity: 10%RH to 95%RH
Toyota TSH 1505G W4700 (label compliance) : Temperature and Humidity Temperature: -70 °C to 180 °C Humidity: 10%RH to 95%RH
Toyota TSH 1551G : Submersible
Toyota TSH 1551G Sec. 9 : Temperature -68 °C to 175 °C
Toyota TSH 1552G : Salt Spray (fog) Ambient up to 90 °C
Toyota TSH 1555G : Cyclic Corrosion Chrysler Temperature: -20 °C to 90 °C Delphi DX900115 Humidity: 10%RH to 100%RH
Toyota TSH1585G-10 (Except Test types IV and V) : Xenon-Arc Lamp Type Methods for Accelerated Weathering Resistance of Paint Film
Toyota TSM 0500G : Flammability
Toyota TSM 1100G-07(Section 8.6) : Weathering Test
Toyota TSM 1500G,5.18 : Painting Test (Contact)
Toyota TSM 1501G,8.9 : Painting Test
Toyota TSM 5728G-05(Part 5.9.2, Method A): Accelerated Weathering
TSK 6505G (Section 4.6) : Paint Film Contamination Resistance
TSL0601G-11 : (Method B & E) Color Change Quality by Aging Test Criteria
TSM 5526G, : Polycarobnate/Acrylonitrile – X- Styrene Alloy Resin Molding Materials
TSM0501G-03 : (Section 65 with Atlas Ci9.20 or equivalent) Accelerated Air (Light) Resistance Test
UL 1581 (Part 1200) : Sunlight Resistance
UL 2556-07 (Part 4.2.8.5) : Weather (Sunlight) Resistance
UL 2703(Part 17.3,17.4&17.1) : Refinement of Polymeric Materials for Testing
UL 60950-1 (Appendix A1) : Combustion Test Using 127 mm Flame Source Used in Electrical Equipment Evaluations
UL 60950-1 (Appendix A2) : Combustion Test Using 20 mm Flame Source Used in Electrical Equipment Evaluations
UL 60950-1 (Section 1.7.11) : Endurance of Marking Test
UL 60950-1 (Part 4.5.5) : Ball Pressure Test
UL 60950-1 (Part 4.2.1 – 4.2.4) : Constant Force Test
UL 60950-1 (Section 4.7.3.1 – 4.7.3.6) : Test of Horizontal Burning Foamed Material
UL 61010-1 (Part 10.5.3) : Ball Pressure Test
UL 61010-1 (Section 8.1.1) : Constant Force Test
UL 746A (Part 13) : Izod Pulse
UL 746A (Part 14) : Tensile Impact Test
UL 746A (Part 16) : Flexural Strength Test
UL 746A (Part 10-12) : Tensile Strength Test
UL 746C (Parts 16 and 51): Combustion Test Using a 20mm Flame Source Used in Electrical Equipment Evaluations
UL 746C (Parts 17 and 52): Combustion Test Using a 127mm Flame Source Used in Electrical Equipment Evaluations
UL 746C (Parts 18 and 53) : Enclosure Burn Test Used in Electrical Evaluations
UL 94 : Flammability (Excluding HBF Test): Horizontal Burn Test (HB), 20 mm Vertical Burn Test (V-0, V-1, V-2), 500 w (125 mm) Vertical Burn Test (5VA, 5VB) Thin Material Vertical Combustion Test (VTM-0, VTM-1, VTM-2)
UL 94 (Part 12) : Horizontal Combustion Foam Material Test
UL2703-(Chapter 18.3-18.6 and Figure 8.1) : Refinement of Polymeric Materials for Testing
UL746A (Part 15) : Charpy Impact Test
UL758-07 (Chapter 17) : Physical Properties of Insulation and Jacket, Sunlight Resistance
UL94 Flammability: Plastic Materials for Appliances and Parts in Appliances
USP 1207 : Package/Seal Integrity (Leak/No Leak Ratio)
VCCI V-3 (2015.04) (up to 6 GHz) : Transmitted and Radiated
VCCI V-4 (2010.04): Conductive and Radiating
VDA 270 : Fragrance
Vibration-Manual : Vibration Test (2 to 6250) Hz, (0 to 214) g Acceleration Sine and Random
Volvo Std 423-0014 : Cyclic Corrosion Chrysler Temperature: -20 °C to 90 °C Delphi DX900115 Humidity: 10%RH to 100%RH
Volvo VCS 1027-14 : Cyclic Corrosion Chrysler Temperature: -20 °C to 90 °C Delphi DX900115 Humidity: 10%RH to 100%RH
Volvo VCS 1027-149 : Cyclic Corrosion Chrysler Temperature: -20 °C to 90 °C Delphi DX900115 Humidity: 10%RH to 100%RH
Volvo VDA 1027-141 : Filiform Procedures AC Temperature: -70 °C to 175 °C, Humidity: 10%RH to 95%RH
Volvo VDA 621-415 : Cyclic Corrosion Chrysler Temperature: -20 °C to 90 °C Delphi DX900115 Humidity: 10%RH to 100%RH
VSI-Outdoor-Weathering : Plastic Siding and Related Products, VSI (Vinyl Siding Institute) Practice Protocols for Conducting Outdoor Weatherproofing Studies
VW 82166 (2011) : Absorbent Lined Shielded Enclosure (80 MHz - 4.2 GHz, up to 200 V/meter) Displacement Method and Metallic Table Top
VW Method TL 909-05 par. 4.10 : Dust Environmental
VW Method TL 909-92 para. 2.2.3, 4.2.3, : Corrosion, Salt Spray Environmental Simulation:
VW Method TL 909-92 para. 2.2.4, 4.1.10.2 : Vibration (Sine, Random, Shock)-22,2 kN (5000 Pound Force), (10 to 3000) Hz, 50 mm (2 in) displacement peak to peak
VW Method TL 909-92 para. 2.2.6, : Rain Environment Simulation
VW Method TL 909-92 para. 4.2.5 : Moisture Corrosion/Environmental Simulation
VW Method TL 956 : Photometry – Backlighting, Signaling, Warning, Marking LED Devices, Cargo Lights and Reflex
VW Methods TL 909-92 par. 3I, 5.1, : Photometry Measurements – Headlights and Front Lighting Devices Photometry
VW Methods TL 909-92 par. 5.1, : Aiming and Adjustment Range – Headlight Photometrics
VW PV 1200, 2005-A, : Environmental Conditioning
VW PV 1303 : Exposure Test of Passenger Compartment Components
VW PV 1303-01 : Passenger Compartment Components Exposure Test
VW PV 3904 : Environmental Conditioning
VW PV 3929-08 : Non-Metallic Materials: Weathering in Dry, Hot Climate
VW PV 3939-08 : Non-Metallic Materials: Weathering in Humid, Hot Climate
VW PV1210 : Cyclic Corrosion Chrysler Temperature: -20 °C to 90 °C Delphi DX900115 Humidity: 10%RH to 100%RH
VW TL 909-05 para. 4.11 : Thermal Shock Corrosion/Environmental Simulation
VW TL1010 : Combustion Behavior – Materials Used in Vehicle Interiors
VW TL81000 (2013.02): Power Frequency Magnetic Field Immunity
VW TL81000 (2014.04): Power Frequency Magnetic Field Immunity
VW/Audi/Porsche TL82066 (2004/2006): Conducted Immunity Supply Voltage transients on power lines
VW/Audi/Porsche TL82166 (2004/2009/2011) : Bulk Current Injection (BCI) – Substitution Method
VW/Audi/Porsche TL82366 (2008): Immunity Transmitted on Signal Lines
VW/Audi/Porsche TL965 (2004/2006/2009/2012): Absorbent-Lined Shielded Housing (80 MHz - 4.2 GHz, up to 200 V/meter) Displacement Method and Metallic Table Top
VW/Audi/Porsche VW80101 (2006/2009/2011) : Over/Under, Back, Jump Start, Faulty Regulator Voltages, electrical stress
VW8246 (2009.06) : Automotive EMC Tests Electrostatic Discharge (ESD)
WSS-M15P6-D1 : Cold Break/ Flexibility
WSS-M5G52-B1 : Cold Breaking / Flexibility
WSS-M8P16-B1 : Cold Breaking / Flexibility
Yamaha YGK-8-501 : Painting – Accelerated Weathering
Yamaha YGK-8-706 : Xenon Arc Lamp Weathering Test

Automotive Tests

List of Major Test Standards for Auto Parts

Automotive Tests

OTHER SECTORS

Get Offer Now

Contact Us

Causes EUROLAB?

Accreditations

Quality Policy

Mission and Vision

Privacy Policy

About Us

Automotive Tests

List of Major Test Standards for Auto Parts

Automotive Tests

OTHER SECTORS

Get Offer Now

Contact Us