GM/Opel Standards Tests

Automakers have merged in the past, so there are many cases where these features are widely used by every automaker. In addition, LV 112 and LV 214 standards for electrical connectors are being developed with the joint participation of automobile manufacturers such as Audi, BMW, Daimler, Porsche and Volkswagen. 

Therefore, Daimler, Benz, Chrysler, Volkswagen, Renault, Nissan etc. Please check the standard number regardless of the name of the finished vehicle manufacturer, such as Among these features, the name of the finished vehicle does not matter.

GM/Opel Standards

1. GM/Opel 9515P; Taber Abrasive Method
2. GM/Opel 9984899; Tp Coating System, Base Coat/ Varnish for Plastic Wheel Trim
3. GM/Opel GM 258M; Weight Loss Insulation
4. GM/Opel GM 2617M:B1; Interior Trim Parts Performance
5. GM/Opel GM 2715M; Wear Resistance <5.000 Cycles W / Weight Low
6. GM/Opel GM 2724M (Paragraph 3.14); Fiber Coating – Indoor or Outdoor
7. GM/Opel GM 273M; Anti-Corrosion Coated Brake Rotors
8. GM/Opel GM 3028; Wear Resistance (3 Samples)
9. GM/Opel GM 3601M; Adhesion Requirements Bonded Exterior Flooring
10. GM/Opel GM 3602M; Bonding Requirements Bonded Internal Assemblies
11. GM/Opel GM 3604M; Adhesion Requirements Exterior Floor Attached PR essure Sensitive Adhesive Tape
12. GM/Opel GM 3608M; Adhesion Requirements Indoor Carpets
13. GM/Opel GM 4298P; Salt Spray Test
14. GM/Opel GM 4350M; Painted Part Performance Requirements
15. GM/Opel GM 4351; Mcorative Second Surface Treatments on Plastic Parts
16. GM/Opel GM 4351M; Decorative Second Surface on Plastic Parts
Operations - Interior Applications 17. GM/Opel GM 4351M (TYPE A); Indoor Applications Gm4351M (Type A) Outdoor Applications
18. GM/Opel GM 4357P; Spot Test Abrasion Sensitivity Stainless Steel
19. GM/Opel GM 4435; PR special Finish – Phosphate Type
20. GM/Opel GM 4465P; Water Mist Humidity Test
21. GM/Opel GM 4466P; Water Immersion Test - Replaced by ASTM D870
22. GM/Opel GM 4476P; CASS Test Copper – Accelerated Acetic Acid Salt SPR moon Test (Fog)
23. GM/Opel GM 4476P (GM 4476P); Copper Accelerated Acetic Acid Salt Spray Test
24. GM/Opel GM 4486P; Ozone Resistance Test of Elastomer Compounds
25. GM/Opel GM 4489P; Paint Appearance Adhesion-Planned Erase Assessment by January. Do Not Use in New Applications.
26. GM/Opel GM 6070P; Flame of materials
Availability 27. GM/Opel GM 6090M; Flame
Availability Materials 28. GM/Opel GM 6275M; Door Glass Channels and Belt Strips
29. GM/Opel GM 7400M; Plastic Parts
30. GM/Opel GM 7451M; Internal Part Performance Requirements Simple, Molded Colored Plastic Components
31. GM/Opel GM 7452M; Performance Requirements Exterior Plastic Parts
32. GM/Opel GM 7457; Automotive Battery
33. GM/Opel GM 9010P; Test Solid Content Adhesives
34. GM/Opel GM 9011P; Cold Shock Resistance Sealing
Test Substances, Extinguishers, Vinyl Films 35. GM/Opel GM 9027P; Test Painting Properties Adhesives Sealing
Items 36. GM/Opel GM 9032P; Determination of Impact Resistance of Plastic
37. GM/Opel GM 9033P; Color Fastness to Cracking (Friction)
38. GM/Opel GM 9053P; Hardness Test Hardness Number Conversions
39. GM/Opel GM 9059P; Test Thermal Oxidative Stability Properties of Plastics
40. GM/Opel GM 9068P; Fogging Properties of Plastics
41. GM/Opel GM 9069P; Hydrogen Sulfide
Test Resistance to Painting 42. GM/Opel GM 9070P; Procedure for Testing Flammability of Materials
43. GM/Opel GM 9071P; Tape Adhesion Test for Paint Surfaces
44. GM/Opel GM 9077P; Glass Content Glass Reinforced Plastics
45. GM/Opel GM 9082P; Test Wear Resistance Plastics
46. ​​GM/Opel GM 9094P; Method for Determining Melting Point Semi-crystalline Polymers by Differential Scanning Calorimetry
47. GM/Opel GM 9101P; Paint Film Visibility Evaluation Test Image
48. GM/Opel GM 9102P; Corrosion Rebound Test Method
49. GM/Opel GM 9110P; Test Keys
50. GM/Opel GM 9125P; Procedures Laboratory Accelerated Exposure Automotive Supplies
51. GM/Opel GM 9126P; Cleanability Test of Textiles and Plastics
52. GM/Opel GM 9126P-A; Cleanability Test for Cleanability of Textiles and Plastics (Procedure A)-
53. GM/Opel GM 9126P-B; Cleanability Test for Cleanability of Textiles and Plastics (Procedure B)-
54. GM/Opel GM 9127P; Resistance Shroud Removal or Loop Pull Floor Coverings
55. GM/Opel GM 9128P; Mold Growth
56. GM/Opel GM 9129P; Seam Strength of Automotive Materials
57. GM/Opel GM 9130P; of textiles
Odor Resistance Test 58. GM/Opel GM 9131P; Color Changes Due to Temperature or Humidity
59. GM/Opel GM 9132P; Resistance to Tearing of Women's Textiles
60. GM/Opel GM 9133P; Resistant to Water Staining, Finish Impairment, Salt Staining and Color
Fade Resistance 61. GM/Opel GM 9134P; Mink
Drawer 62. GM/Opel GM 9140P; Resistance of Interior Vinyl Materials Against Cold Cracking
63. GM/Opel GM 9141P; For Plastic Roll Leather White Vinyl White Leather
64. GM/Opel GM 9142P; Grain Retention Interior Flooring Materials
65. GM/Opel GM 91433; P Resistance Water Staining Salt Painting
66. GM/Opel GM 91433P; Resistance to Water Spotting and Salt Spotting
67. GM/Opel GM 9143P; Crazy Vinyl Cladding Materials
68. GM/Opel GM 9144P; Arc of Dielectrically Embossed Materials
Resistance to Formation or Carbonization 69. GM/Opel GM 9146P; Sunroof and Ceiling Flooring Materials
Flexibility - 70th GM/Opel GM 9149P; Stitching Tear Resistance Vinyl Coated Genuine Leather
71. GM/Opel GM 9150P; Resistance to Distortion or Friction
72. GM/Opel GM 9151P; Flexibility Plastic Material
73. GM/Opel GM 9160P; Topcoat Adhesion Vinyls
74. GM/Opel GM 9172P; Sunlamp Exposure Test
75. GM/Opel GM 9184P; Body
Dielectric Relief of Fabric 76. GM/Opel GM 9193P; PR process Determination of Bond Strength Fiberglass
77. GM/Opel GM 9194P; Binder Content Fiberglass Substrates
78. GM/Opel GM 9198P; Migratory Oils or Dyes
Items 79. GM/Opel GM 9200P; Accelerated Aging and Steaming
80. GM/Opel GM 9202P; Heat
Determination of Formed Insulation Material 81. GM/Opel GM 9206P; Coefficients Friction Soft Trim Material
82. GM/Opel GM 9207P; Fixing
Powers Hook & Loop Tapes 83. GM/Opel GM 9209P; Trimethylamine in Fiberglass Parts
84. GM/Opel GM 9210P; Fiber Coating Adhesion
85. GM/Opel GM 9214P; Testing of Painting Trim Materials
86. GM/Opel GM 9215P; Mold Resistance Test Paper Wood PR products
87. GM/Opel GM 9216P; Coating Adhesion Vinyl Coated Materials
88. GM/Opel GM 9222P; Resistance Coated Genuine Leather
wear 89 . GM/Opel GM 9231P; Hydrolytic Stability
90. GM/Opel GM 9233P; smc
Repair Procedure for 91. GM/Opel GM 9240P; Sweating Resistance
92. GM/Opel GM 9300P; Impact Test Plastic Materials (Instrumental or
Toolless ) 93. GM/Opel GM 9301P; Test Intrinsic Melt Viscosity Thermoplastic Resins
94. GM/Opel GM 9302P; Test Stress Sign Sensitivity Plastic Materials
95. GM/Opel GM 9303P; Mold Resistance – Pink Stain Test
96. GM/Opel GM 9304P; Abrasion Resistance – Rca Abrasion Tester
97. GM/Opel GM 9305P; Determination of Fogging Properties of Automotive Interior Upholstery Materials
98. GM/Opel GM 9305P (Fogging F); Determination of Fogging Properties (Fogging F) Determination of Fogging Properties of Automotive Interior Upholstery Materials-
99. GM/Opel GM 9306P; Ash Content Plastic Materials
100. GM/Opel GM 9307P; Aging Test Vinyl Compounds and/or Parts
101. GM/Opel GM 9308P; Chemical Stress Resistance Plastics
102. GM/Opel GM 9310P; Variable Surface Temperature Heat Exposure Test
103. GM/Opel GM 9317P; Water Repellency Test
104. GM/Opel GM 9327P; Outdoor Weather Resistance Integrated Colored Plastics
105. GM/Opel GM 9328P; Mold Resistance – Mixed Culture Method
106. GM/Opel GM 9329P; High Temperature Humidity Aging
107. GM/Opel GM 9337P; Test Method Determine Fiber Weight Loss in Carpet
108. GM/Opel GM 9450P; Test PR process Determination of Water Permeability
109. GM/Opel GM 9451P; Test the PR action Identify Warpage 110.
GM/Opel GM 9452P; Dimensional Stability Test
111. GM/Opel GM 9454P; Percent Asphalt Saturation Roof
Insulation Felt 112. GM/Opel GM 9500P; Petrol Puddle Test Petrol Filling Areas
113. GM/Opel GM 9501P; Petrol Immersion Test for Painted Parts
114. GM/Opel GM 9502P; Knife Cross Scan Adhesion Test
115. GM/Opel GM 9503P; Painted Plastics and Sealing
Evaluation of Brittleness of Materials Through Mandrel 116. GM/Opel GM 9504P; Oven Aging Test Procedure for Painted Plastic Surfaces
117. GM/Opel GM 9505 P- Test Zyklus M; Test Cycle M – Dimensional Stability Cycle
118. GM/Opel GM 9505P; Automotive Environmental Cycles
119. GM/Opel GM 9506P; Dime Scraping Test Paint Adhesion
Determines Brittleness 120. GM/Opel GM 9507P; Thumbnail Hardness Test (Scratch Test)Thumbnail Hardness for Painted Parts
Test - 121. GM/Opel GM 9508P; Chip Resistance Coating
122. GM/Opel GM 9509P; Anti-Resistance Solvent (Determination of Cure of Painted Surfaces)Solvent Rubbing Method for Determining the Cure of Painted Metal or Plastic Surfaces-
123. GM/Opel GM 9511P; Scab Corrosion Creepback Paint Systems on Metal Surfaces
124. GM/Opel GM 9514P; Recommended PR action Hot Water Immersion Test
125. GM/Opel GM 9515 P (according to ASTM D4060); Abrasion resistance with Taber Abraser MethodAbrasion resistance of organic coatings (Taber Abraser Method) Modification of Astm D4060 126
. GM/Opel GM 9515P; Abrasion Resistance Organic Coatings (Taber Abraser Method)
127. GM/Opel GM 9516P; Abrasion Resistance – Canvas Belt Abrasion Tester
128. GM/Opel GM 9517P; Synthetic
Sweat Resistance Synthetic Sweat Resist- 129. GM/Opel GM 9518P; Determination of Paint Thickness Painted Flexible Plastic Parts
130. GM/Opel GM 9525P; Thermal Shock Test for Paint Adhesion
131. GM/Opel GM 9528P; Impact Test Outer Body Side Mold DIN gs
132. GM/Opel GM 9531P; Water Jet Test
133. GM/Opel GM 9534P; Ultraviolet/Visible Transmission with Cured Paint Film
134. GM/Opel GM 9538P; Weathering Tests for Interior Flooring
135. GM/Opel GM 9540P; Accelerated Corrosion Test
136. GM/Opel GM 9542P; Abrasion Resistance Hot Flakes and Falling Sand Method Related PR products
137. GM/Opel GM 9542P (8/89); Falling Sand, Abrasion
138. GM/Opel GM 9542P (8/89)2; Falling Sand
Wear 139. GM/Opel GM 9620M; Pigmentation Assessment
140. GM/Opel GM 9625P; Preparation of Acid Rain Solution
141. GM/Opel GM 9635P; Dust Output of Fiber Sound Absorbing Pad-
142. GM/Opel GM 9675P; Dynamic Flexible Fatigue Test
143. GM/Opel GM 9676P; Steam Fuel Line
144 Fittings for . GM/Opel GM 9689P; Asphalt Painting Test
145. GM/Opel GM 9691P;
Abrasion Resistance Test for Engraved Weather Strips 146. GM/Opel GM 9692P; Determination of Formaldehyde in Fiberglass Parts
147. GM/Opel GM 9736P; Resistance to Distortion or Friction
148. GM/Opel GM 9740P; Acrylonitrile, Styrene Butadiene Compounds ABS Polymers
149. GM/Opel GM 9758P; Adhesion Strength Exterior
Coatings 150. GM/Opel GM 9770P; Weatherstrip Coating
Hardening Test 151. GM/Opel GM 9771P; Procedure for Determining Fiber Degradation of Automotive Textiles
152. GM/Opel GM 9774P; Molding and Emblem Adhesion Test Tear Resistance
153. GM/Opel GM 9795P; Adhesion Strength Bonded Weatherstrip – PR essure Sensitive Adhesive
154. GM/Opel GM 9797P; Cleavage Peel Test
155. GM/Opel GM 9838P; Tape Lamination Automotive Components
156. GM/Opel GM 9894; Peeze Features Weatherstrips
157. GM/Opel GM 9894P;
Freezing Properties of Weather Strips 158. GM/Opel GM 9896P;
Adhesion of Weather Strips to Paint, Paint and Wrinkles 159. GM/Opel GM 9897P;
Bonding Flat Tapes to Glass and 160. GM/Opel GM 9900P; Cleaning / Solvent Resistance of Automotive Components During Normal Customer Use
161. GM/Opel GM 9900P (GM 9900P); Cleaning / Solvent Resistance of Automotive Components During Normal Customer Use
162. GM/Opel GM 9902P; Non-contact Dyeing Measurement Elastomers
163. GM/Opel GM 9904P; Multi-Axis Impact Test
164. GM/Opel GM B 040 0540; Fabric Adhesive Tape Fabric Tape
165. GM/Opel GM B 440 0029; Cleaning Solvent 100/140 Gasoline 100/140
166. GM/Opel GM B 440 0064; Alcohol, Denatured Alcohol, Denatured
167. GM/Opel GM Daewoo DS-T-7415; Light Fastness Test Method for Determining Color Fastness to Artificial Light-
168. GM/Opel GM Daewoo EDS-T-7602; Combustion Behavior Test Method for Flammability of Indoor Materials-
169. GM/Opel GM Daewoo EDS-T-7603; Odor Test for the Smell of Indoor Materials Test
Method- 170. GM/Opel GM E60276; Determining the Odor Behavior of Body Materials
171. GM/Opel GM E7061; Residual Dirt Analysis
172. GM/Opel GM Physical Certification; Battery
173. GM/Opel GM TM 912200; On Wood Pulp Base, Fiberplast Board Glued With Synthetic Resin Shaped Pieces, EG Side Panel Edges, Door Edges etc.
174. GM/Opel GME 00002; General Requirements Colored Plastic Components External Use General Requirements Colored Plastic Exteriors
175. GM/Opel GME 00004; General Requirements Integrated
Colored Plastic Components Interior Use General Requirements Colored Plastic Interiors 176. GM/Opel GME 00010 (GME 00010); Performance for Automotive Plastic Parts / Performance for Automotive Plastic Parts
177. GM/Opel GME 00211; Performance Requirements Paint Applied to Plastic Components Topcoat Components Interior Use General Requirements Coatings Plastic Surfaces on Vehicle Interior Components
178. GM/Opel GME 00251; electrolytic
Accumulated Multi-Layer Systems 179. GM/Opel GME 00252; Application Electrolytique De Revetements Metalliques
180. GM/Opel GME 01002 ; Requirements Lacquer Coating Elastomeric Body Gaskets Demands Lacquer Coating on Elastomer Gaskets
181. GM/Opel GME 01004; Door Rear Compartment Seals Combined Push-On Carriage Door Rear Compartment Seals Edge PR otection
182. GM/Opel GME 01007; Sealing Sections Glued Glass Sealing PR ofiles Glued Glass
183. GM/Opel GME 01124; Door Trim Panel Side Panel Door Side Cladding Overlay
184. GM/Opel GME 01125; Door Remote Control Handle , Inside Handle Door Remote Control Inside
185. GM/Opel GME 08004; Elastomeric Vacuum Hoses Vacuum Hoses Elastomer
186. GM/Opel GME 08200; Charcoal Filters Activated Carbon Filter
187. GM/Opel GME 12505; Lampes et Phares
188. GM/Opel GME 12505-1; Lamps Front Lamps Lamps Spots
189. GM/Opel GME 13003; Passenger Car - Heating - Ventilation Air Conditioning, Part 1, General Requirements Vehicle - Heating - Ventilation
Air Conditioning, Part 1, General Requirements 190. GM/Opel GME 14022; Single Core Cables
191. GM/Opel GME 14074; SunscreEN Insect Repellent Resist Resistance Sun Insect Repellent
192. GM/Opel GME 3191; General Features Electrical/Electronics
193. GM/Opel GME 60202; Termination Resistance Automotive Components High Humidity Environments
194. GM/Opel GME 60202 (GME 60202); Determination of Automotive Components' Resistance to High Humidity Environments / Determination of Automotive Components' Resistance to High Humidity Environments
195. GM/Opel GME 60203; Corrosion Resistance of Organic Coatings Under Cyclic Changing Conditions
196. GM/Opel GME 60206; Determination of Corrosion Resistance of Automotive Components
197. GM/Opel GME 60207; Determination of Corrosion Resistance of Automotive Components with Cooper Accelerated Acetic Acid Salt Spray (Cass)
198. GM/Opel GME 60213; Swaat Test
199. GM/Opel GME 60243; Termination Tension Adjustment Under Constant Elongation De Termination Train – Deformation Residue After Constant Deformation
200. GM/Opel GME 60244; End Adhesion Elastomer Glass or Painted Sheet AnklebeverhaltEN Elastomers Glass or Painted Sheet
201. GM/Opel GME 60246; Compressibility
202. GM/Opel GME 60247; A Defined One
Determination of Compressibility of Cellular Elastomer at Deflection 203. GM/Opel GME 60248; Coatings on Elastomers and Textile Interior Materials
Scraping - 204. GM/Opel GME 60250; Compression Set
Determination of 205. GM/Opel GME 60251; Termination Ozone Resistance Elastomers Ozone Resistance Elastomers
206. GM/Opel GME 60252; Termination Designation Hardness (Shore AD) Hardness Test by Using a Durometer Shore AD
207. GM/Opel GME 60253; Fuel Resistance of Elastomers
208. GM/Opel GME 60254; Horizontal Flammability
209. GM/Opel GME 60255; Resistance to Fluids and Greases Resistance of Elastomers to Fluids and Greases-
210. GM/Opel GME 60256; Micro Hardness Test
211. GM/Opel GME 60257; Tensile Stress-Strain Properties
212. GM/Opel GME 60258; Accelerated Aging Test Elastomers Artificial Aging Elastomers
213. GM/Opel GME 60259; Cold Resistant Elastomers Cold Resistant Elastomers
214. GM/Opel GME 60261; Termination Flammability Materials Vehicle Interiors
215. GM/Opel GME 60262; Termination Resist PR protector Wax Remover Elastomer PR products Resist Elastomer PR papers Schutzwachsentferner
against 216. GM/Opel GME 60264; Sulfur
Paint Resistance 217. GM/Opel GME 60266; Resistance to Cleaning Agents
218. GM/Opel GME 60268; Finishing Resistance Stone Impact Sudace Coatings, Plastic Self Adhesive Films Chip Resistance Organic Coatings, Plastics Self Adhesive Films
219. GM/Opel GME 60268 (GME 60268); Stone Impact / Impact Stone Impact Resistance
220. GM/Opel GME 60269; Test Method Determination of Wear Resistance Metallized, Painted, Public Relations etc. Plastic Parts Test Wear Resistance Coated Plastic Parts
221. GM/Opel GME 60271; Formaldehyde Termination from Molded Parts Hanes Vehicle Interior Termination Formaldehyde Release MoldDIN gs Vehicle Interior
222. GM/Opel GME 60271 (GME 60271); Determination of Formaldehyde Release from Molded Parts for Vehicle Interiors
223. GM/Opel GME 60273; Light
Balance 224. GM/Opel GME 60276; Test Method Resistance Identification Odor PR operation Trim Material Identification Odor Behavior Materials Bodywork Equipment
225. GM/Opel GME 60-276; Odor Analysis
226. GM/Opel GME 60276 (GME 60276); Test Method for Determining the Resistance of Ornamental Materials to Odor Spread / Odor Resistance
227. GM/Opel GME 60280; Scratch Mar Resistance (Surface Condition Plastics) Scratch Resistance Write Effect (Surface Finish Plastics)
228. GM/Opel GME 60283Part1; Chapter 1 Apparent Density of Cellular Materials
229. GM/Opel GME 60283 Part2; Chapter 2 Traction/Elongation Cellular Materials
230. GM/Opel GME 60283 Part3; Chapter 3 Tear Propagation Strength
231. GM/Opel GME 60283Chapter4; Part 4 Compression Cellular Materials
232. GM/Opel GME 60283Chapter5; Chapter 5 Cellular Moisture Resistant Materials
233. GM/Opel GME 60283Part6; Chapter 6 Heat
234. GM/Opel GME 60283Part7; Chapter 7 Hardness Number
235. GM/Opel GME 60283Part8; Chapter 8 Distortion by Load Compression
236. GM/Opel GME 60286; Determination of Air Permeability Test Method to Determine Air Permeability of Flooring Materials-
237. GM/Opel GME 60287; Determination of Resistance to Mold Growth
238. GM/Opel GME 60288; Martindale Abrasion Test for Textile Fabrics Abrasion Test – Martindale Abrasion Test –
239. GM/Opel GME 60290; Termination Hardness Cellular Components PR with a Mandrel (Indenter), Constant Force
240. GM/Opel GME 60292; Finishing Color Fastness Resistance Artificial Light Rating Light Fastness Light Fastness
241. GM/Opel GME 60292-1 (BST 115°C); Color Fastness and Resistance to Artificial Light Determination of color fastness and resistance to artificial light Coding 1: 115°C
242. GM/Opel GME 60292-2 (BST 100°C); Color Fastness and Resistance to Artificial Light Determination of color fastness and resistance to artificial light Coding 2: 100°C
243. GM/Opel GME 60292-Meth-2; Determination of Color Fastness and Resistance to Artificial Light – Method 2 (Ci3000)
244. GM/Opel GME 60300; Conditioning of Plastic Materials
245. GM/Opel GME 60301; Determination of Weight Per Unit Area Bestimmung Des Flächengewichtes
246. GM/Opel GME 60302; Determining the Softness of Upholstery Material Softness Plastic Films, Synthetic Leather Textile Fabrics
247. GM/Opel GME 60303; Thickness Detection Trim Material Thickness Detection Materials Bodywork Equipment
248. GM/Opel GME 60303-1; Thickness Test method for determining the thickness of coating materials Coding 1: Caliper Equipment
249. GM/Opel GME 60303-2; Thickness Test method for determining the thickness of coating materials Coding 2: Force Indicator Equipment
250. GM/Opel GME 60304; Stain Resistance Test Method for Determining the Resistance of Ornamental Materials to “Staining” by Water and Salt Solution-
251. GM/Opel GME 60305; Determination of Stretch Permanent Set Properties Textile Leather Fabrics Dahnung Permanent Increase Determination of Textile Fabrics Artificial Leather
252. GM/Opel GME 60306; Determination of Low Temperature Resistance Determination of Automotive Trim Material Cold Resistance Plastic Films After Idle
253. GM/Opel GME 60307; Determination of Temperature Stability Automotive Trim Material Test Temperature Resistance Materials Bodywork Features
254. GM/Opel GME 60311; Determination of Frictional Properties of Seal Ulpolstery Materials
255. GM/Opel GME 60315;
Determination of Peel Resistance of Bonded Body Trim Materials - 256. GM/Opel GME 60317; Determination of Yarn Count and Yarn Density in Woven Fabrics -
257. GM/Opel GME 60318; Peel Resistance Test Method for Determining Peel Resistance of Self-Adhesive Tapes and Films-
258. GM/Opel GME 60321; Determination of the Proportions of Vegetal Fibers A Rubber Test Method for Determining the Proportions of Vegetal Fibers and Rubber Flooring Materials-
259. GM/Opel GME 60322; To Molded Plastics
Peel Resistance of Bonded Plastic Films 260. GM/Opel GME 60323; Determination of Knitting Density Determination of Knitting Density in Knitted Fabrics -
261. GM/Opel GME 60325; Determination of pull PR operations Body Trim, Sealant, Silencers etc. Tensile Test Materials Superstructure Equipment, Sealing Materials, Damping Plates etc.
262. GM/Opel GME 60326; Evaluation of Fogging Properties Trim Material Volatility Organic Compounds (Fogging Effect) Materials Used Pavement Equipment
263. GM/Opel GME 60326 (GME 60326); Fogging / Fogging
264. GM/Opel GME 60327; MDF, Cardboard etc. Under Humid Conditions. Determination of Dimensional Stability
265. GM/Opel GME 60329; Determination of Resistance Yarn Tearing Determination of Trim Material Stichausreißwiderstandes Fabrics
266. GM/Opel GME 60330; Rubbing for Colors
267. GM / Opel GME 60331; Pilling Resistance Test Method for Determining the Pilling Resistance of Upholstery Materials-
268. GM/Opel GME 60334; Determination of Tear Strength Textile Fabrics Coated (Single Tear Method) Tear Force Artificial Leather, etc. Textile Fabrics
269. GM/Opel GME 60335; Laminate Adhesion Strength Test Method for Laminate Adhesion Strength of Leathercloths and Other Laminated Trim Materials-
270. GM/Opel GME 60341; Seam Strength Detection Upholstery Trim Material Detection Seam Strength
271. GM/Opel GME 60342; Test Method for Determining Compressive Properties of Cushioning Materials Under Static Stress
272. GM/Opel GME 60344; Determination of Surface Resistance Test Method for Evaluation of Electrostatic Properties of Upholstery Materials by Surface Resistance Measurements-
273. GM/Opel GME 60345; Abrasion Resistance – Rotary Wear Test (Schopper) Test Method for Determining Abrasion Resistance of Automotive Trim Materials (Rotary Wear Test – Schopper)-
274. GM/Opel GME 60348; Test Method for Burst Strength of Cardboard, MDF and Similar Rigid Materials
275. GM/Opel GME 60349; Test Method for Determining Cohesive Strength of Felts and Similar Materials
276. GM/Opel GME 60351; Determination of Moisture Content, Water Absorption and Thickness Swelling of MDF, Particleboard, Cardboard, etc.
277. GM/Opel GME 60352; Determining Paper Density
278. GM/Opel GME 60368; Artificial
Determination of Abrasion Resistance of Leathers - 279. GM/Opel GME 60380; Determining the Compressive Strength of Trim Materials
280. GM/Opel GME 60382; Determination of Tension for Interior Leather
281. GM/Opel GME 60400; Determination of Wear Resistance Organic Coatings Abrasion Resistance Organic Coatings
282. GM/Opel GME 60400 (GME 60400); Abrasion Resistance of Organic Coatings / Abrasion Resistance of Organic Coatings
283. GM/Opel GME 60401; Cross Scan Test Organic Coatings Cross Cut Test Organic Coatings
284. GM/Opel GME 60401 (GME 60401); Bonding of Organic Coatings / Bonding of Organic Coatings
285. GM/Opel GME 60402; Finishing Scratch Resistance Organic Coatings Scratch Resistance Organic Coatings
286. GM/Opel GME 60402 (GME 60402); Scratch Resistance of Organic Coatings / Scratch Resistance of Organic Coatings
287. GM/Opel GME 60403; Resistance to Color Change of Finished Organic Coated Surfaces
288. GM/Opel GME 60404; Resistance of Organic Coatings to Surface Deterioration by Chemical Effect
289. GM/Opel GME 60405; Pulsed Salt Solution Resistance
290. GM/Opel GME 60406; Resistance of Organic Coatings, Plastics and Adhesive Films to Surface Deterioration by Antifreeze Solution
291. GM/Opel GME 60407; Impact Resistance of Organic Coatings
292. GM/Opel GME 60413; Color Measurement and Visual Comparisons of Painters
293. GM/Opel GME 60414; Color Measurement and Visual Comparisons of Internal Plastic Parts
294. GM/Opel GME 6867; Accelerated Aging Accelerated Aging Test for Polymer Safety Parts -
295. GM/Opel GME 7061; Identifying Residual Dirt in Finished Engine and Gear Components
296. GM/Opel GME 8701; Evaluation of Friction Properties Evaluation of Friction Properties of Body Hardware Materials-
297. GM/Opel GME 8742; Specific Bulk Resistance Elastomers, Plastic Adhesives Inspection Bulk Resistance Elastomers, Plastic Adhesives
298. GM/Opel GME 8761; Test Push-On Pull-Off Forces Sealing PR offices Body Area Inspection Placement Pull-Off Forces Body Gaskets Organic Coatings Applied in Performance Requirements Automotive Plastic Parts Components General Requirements Organic Coatings
299. GM/Opel GME L 0002; Synthetic Perspiration Solution Synthetic Welding Solution
300. GM/Opel GME L0002; Synthetic Perspiration Solution
301. GM/Opel GME L0003; Methanol Modified Test Liquid
302. GM/Opel GME LR038; Vehicle
Squeak and Click Rating 303. GM/Opel GME R017; Driving Program for Endurance
304. GM/Opel GME R06; Determining Vehicle Corrosion Behavior
305. GM/Opel GMI 00002 (GMI 00002); General Requirements for Colored Plastic Components for Outdoor Use / Exterior
General Requirements for Colored Plastic Components for Indoor Use 306. GM/Opel GMI 00004; General Requirements Integrated Colored Plastic Components Indoor Use General Requirements Colored Plastic Interiors
307. GM/Opel GMI 60206; Termination Resistance Corrosion Automotive Components SPR months with Salt Fog Test Determine Corrosion Resistance Vehicle Parts SPR months Only
308. GM/Opel GMI 60206 (GMI 60206); Determination of Corrosion Resistance of Automotive Components by Salt Spray Fog Test / Determination of Corrosion Resistance of Automotive Components with Salt Spray Fog Test
309. GM/Opel GMI 60211; Salt Mist Spray for Electrical Components
310. GM/Opel GMI 60246-A; Determination of the compressibility of a cellular elastomer under a given force Determination of the compressibility of a cellular elastomer under a given force Pressure Foot Type: A
311. GM/Opel GMI 60254; Termination Compatibility Different Materials Contact Review Verträglichkevito N Each Contact Material
312. GM/Opel GMI 60254 (without rework); Compatibility of Different Materials
Determining the Compatibility of Different Materials in Contact - 313. GM/Opel GMI 60261; Flammability of Interior Flooring Materials
314. GM/Opel GMI 60262; Finishing Resistance PR Protective Wax Remover Elastomer PR Protectors Resist Elastomer PR Papers PR Protective Wax Remover
315. GM/Opel GMI 60263; Sulfur Dioxide of Automotive Trim Components
Determination of Paint Resistance 316. GM/Opel GMI 60264; Sulfur Dioxide of Automotive Trim Components
Determination of Resistance to Staining 317. GM/Opel GMI 60265; Determination of Liquid Resistance of Automotive Exterior Trim Components
318. GM/Opel GMI 60266; Finishing Resistance Cleaning Agents Automotive Trim Components Reinigungsmittelbestindigkeit Plastics, Organic Coatings Self Adhesive Films
319. GM/Opel GMI 60267; Termination Impact Strength Determination of Impact Plastic Components Kunststoffteiien
320. GM/Opel GMI 60267-1-C; Impact Strength (Steel Ball, After Accelerated Aging) Determination of Impact Strength of Plastic Components, Apparatus C (Steel Ball), Coding 1- After Accelerated Aging and Cooling to 23°C
321. GM/Opel GMI 60267-2-C; Impact Strength (Steel Ball, Test at 23°C) Determination of Impact Strength of Plastic Components, Apparatus C (Steel Ball), Coding 2- Test at 23°C
322. GM/Opel GMI 60267-3-C; Impact Strength (Steel Ball, After 30 Hours of Storage at -4°C) Determination of Impact Strength of Plastic Components, Apparatus C (Steel Ball), Coding 3- After 30 Hours Storage at -4°C and Immediately After Disassembly
323. GM/ Opel GMI 60272; Compatibility of PVC-Materials with Amine Compatibility of PVC-Interior Flooring Materials with Amine-
324. GM/Opel GMI 60275; Finishing Resistance Synthetic Perspiration Solution Automotive Trim Components Body From Parts
Inner Synthetic Perspiration Resistance Solution 325. GM/Opel GMI 60283-1; Apparent Density of the Test for Cellular and Related Materials
Determining Procedures – Part 1- Determining Apparent Density 326. GM/Opel GMI 60283-2; Tensile Properties of the Test for Cellular and Related Materials
Procedures – Part 2- Determination of Tensile Stress-Strain Properties 327. GM/Opel GMI 60283-4; Test Procedures for Cellular and Related Materials - Part 4: Compression Set
Determination of 328. GM/Opel GMI 60283-5; Test Procedures for Cellular and Related Materials - Part 5: Determination of Moisture Resistance Aging
329. GM/Opel GMI 60283-8; Determination of Compression Load Deviation (40% Compression) Test Procedures for Cellular and Related Materials – Part 8- Determination of Compression Load Deviation (40% Compression)
330. GM/Opel GMI 60300; Conditioning of Plastic Materials
331. GM/Opel GMI 60306; Determination of Low Temperature Strength Test Method for Determining Low Temperature Strength of Automotive Trim Materials -
332. GM/Opel GMI 60307; Test Method Determination of Temperature Stability Automotive Trim Material Test Temperature Resistance Materials Used Bodywork Equipment
333. GM/Opel GMI 60314; Unit Area Weight Test Procedure for Determining the Unit Area Weight of the Back of PVC Coated Flooring Materials-
334. GM/Opel GMI 60333; Test Method Ignition Residue (Ash) Determination Polymeric Materials Ignition Residue Determination
335. GM/Opel GMI 60340; Test Method Heat Aging Tensile Elongation Determination of PR operations Plastic Film Heat-Aged Elongation at Break Determination PR operations Plastic Film
336. GM/Opel GMI 60347; Bond Strength PR welded as Dielectric Welding Seams Assembly Components Internal Equipment Adhesion Dielectric PR welded Welds Together Components Internal
337. GM/Opel GMN 10033; Sunscreen Lotion Resistant Interior Coatings
338. GM/Opel GMN 10046; Insulation – Thermal and/or Acoustic – PR essure-sensitive Adhesive, Aluminum, Fiber Composite – Exterior
339. GM/Opel GMN 10059; Cleaning Solvent Resistance During Normal Customer Use
Aging Strips 340. GM/Opel GMN 10083; Interior Paint Durability (Plastic Surfaces)
341. GM/Opel GMN 3943; Scratch Mar Resistant Plastics, Five Arms Test
342. GM/Opel GMN 4947; Coating Thickness in Sponge and Dense Air Strips
343. GM/Opel GMN 6753; Pull PR operations Injection Molded Short Glass – Fiber Reinforced Thermoplastics Use Finite Element Analysis Long Flow Length Parts
344. GM/Opel GMN 8020; Lamps – Development Verification Test PR procedures
345. GM/Opel GMN 8170; Resistance Blocking
346. GM/Opel GMP.PP.002; Polypropylene – Heat Stabilized, UV Stabilized, Impact Modified
347. GM/Opel-GMW 105015; Elastic and Non-Elastic Cords and Suspended Elastic Cords or Surrounding Convenience Nets Surrounding Mesh Fabric Map Pockets in Passenger Area or in the Car Trunk.
348. GM/Opel GMW 14011; Purpose Subsystem/Component
Squeak Rattle Test 349. GM/Opel GMW 14069; Migration – Bleeding Resistance Contact Stain Compatibility Pvc Other Materials
350. GM/Opel GMW 14069-A; Migration – Bleeding resistance Migration – Bleeding resistance and contact spot compatibility of PVC with other materials Method A: Bleeding Resistance
351. GM/Opel GMW 14069-B; Migration – Contact spot compatibility Migration – Bleed resistance and contact spot compatibility of PVC with other materials Method B: Contact Spot Compatibility
352. GM/Opel GMW 14093; Determination of Impact Strength Plastic Components
353. GM/Opel GMW 14093-1-C; Impact Strength (Steel Ball, After Accelerated Aging) Determination of Impact Strength of Plastic Components, Apparatus C (Steel Ball), Coding 1- After Accelerated Aging and Cooling to 23°C
354. GM/Opel GMW 14093-2-C; Impact Strength (Steel Ball, Test at 23°C) Determination of Impact Strength of Plastic Components, Apparatus C (Steel Ball), Coding 2- Test at 23°C
355. GM/Opel GMW 14093-3-C; Impact Strength (Steel Ball, After 30 Hours of Storage at -4°C) Determination of Impact Strength of Plastic Components, Apparatus C (Steel Ball), Coding Test at -3°C after 4 - 30 Hours and Immediately After Disassembly
356. GM/Opel GMW 14093-C; Impact Strength (Steel Shot, After Aging) Determination of Impact Strength of Plastic Components, Apparatus C (Steel Shot), Aging Acc. Special Requirements -
357. GM/Opel GMW 14102; Determining the Water Spotting Test
358. GM/Opel GMW 14108; In Cold Temperature
Flexural Cracking Resistance Materials' Resistance to Bending at Cold Temperatures - 359. GM/Opel GMW 14109; Door Trim Panel Side Panel Door Side Wall Covered
360. GM/Opel GMW 14122; Material Specification Textiles – Plastic Coil Articles, Prg-
361. GM/Opel GMW 14124; M Cycle Environmental Shrinkage
362. GM/Opel GMW 14124 2010-11; Automotive Environmental Cycles –
363. GM/Opel GMW 14124 2012-07; Automotive Environmental Cycles Test Cycle Q: Aging Condition for Adhesion Strength and Hydrolytic Stability of Laminated Textile Materials
364. GM/Opel GMW 14124 - Cycle W, revised according to. According to GMW 14892 (2012)-Indoor adhesive/sealant humidity high temperature Test cycleAutomotive EN vironmental Cycles; Test Cycle W: Internal Adhesive/Sealant Humidity High Temperature Test Cycle / Climate Cycle Revised Per Gmw 14892, Issue 2012-04 (Adhesion Requirements for Adhesive Internals)
365. GM/Opel GMW 14124- Test cycle C; Outdoor humidity thermal cycleAutomotive Environmental Cycles, Test Cycle C: Outdoor Humidity Thermal Cycle
366. GM/Opel GMW 14124- Test cycle D; Internal humidity thermal cycleAutomotive Environmental Cycles, Test Cycle D: Internal Humidity Thermal Cycle
367. GM/Opel GMW 14124- Test cycle H; Dimensional Stability Test CycleAutomotive Environmental Cycles, Test Cycle H: Dimensional Stability Test Cycle
368. GM/Opel GMW 14124- Test cycle M; Interior trim dimensional stability cycleAutomotive Environmental Cycles, Test Cycle M: ​​Interior Trim Dimensional Stability Cycle
369. GM/Opel GMW 14124- Test cycle P; Coated door panel delamination/dimensional stability cycleAutomotive Environmental Cycles, Test Cycle P: Clamshell Door Panel Drilling/Dimensional Stability Cycle
370. GM/Opel GMW 14124- Test cycle Q; Aging Condition for Adhesive Strength and Hydrolytic Stability of Laminated Textiles Automotive Environmental Cycles, Test Cycle Q: Aging Condition for Bond Strength and Hydrolytic Stability of Laminated Textiles
371. GM/Opel GMW 14124- Test cycle R; Shrinkage of upholstery materials used to wrap instrument panels (IP) and rear window trim (RWT) Automotive Perimeter Cycles, Test Cycle R: Shrinkage of Upholstery Materials Used to Wrap Instrument Panels (Ip) and Rear Window Trim (RWT)
372. GM/ Opel GMW 14124- Test cycle S; Accelerated aging of leather and plastic rolled goodsAutomotive Environmental Cycles, Test Cycle Q: Accelerated Aging of Leather and Plastic Rolled Goods
373. GM/Opel GMW 14124- Test cycle T; Environmental simulation Autoclave TestAutomotive Environmental Cycles, Test Cycle T: Aging Condition for Adhesion Strength and Hydrolytic Stability of Laminated Textile Materials (Q Cycle Option)
374. GM/Opel GMW 14124- Test cycle W; Indoor adhesive/sealant humidity high temperature Test cycle Automotive Environmental Cycles, Test Cycle W: Interior Adhesive/Sealant Humidity High Temperature Test Cycle
375. GM/Opel GMW 14125; Linear Wear Test
376. GM/Opel GMW 14126; Resistance Cold Crack Folded Materials
377. GM/Opel GMW 14127; Impact Cold Crack
378. GM/Opel GMW 14129; Sewing Thread Sewing Thread for Automotive Sewing Applications -
379. GM/Opel GMW 14130; Resistance Breakdown or Friction
380. GM/Opel GMW 14131; Compatibility Interior Upholstery Materials Amines
381. GM/Opel GMW 14132; Resistor Inhibit replaces Gmn8170 382.
GM/Opel GMW 14134; SoftnessSoftness (Leather)-
383. GM/Opel GMW 14141; Paint
TransitionPaint Transition-384. GM/Opel GMW 14145; Seam Strength
385. GM/Opel GMW 14146; Thread
Slip on Thread Slip - 386. GM/Opel GMW 14148; Ring Tensile Strength Ring Tensile Strength of Floor Carpet -
387. GM/Opel GMW 14162; Color Fastness Artificial Weathering
388. GM/Opel GMW 14162(Method D); Color Fastness Artificial Weathering
389. GM/Opel GMW 14162-A; Color Fastness to Artificial Weathering Method Color Fastness to Artificial Weathering Method A: Light and Dark Exposure Cycle
390. GM/Opel GMW 14162-B; Color Fastness to Artificial Weathering B Color Fastness to Artificial Weathering B: Light Exposure Cycle Only (100 °C Bst)
391. GM/Opel GMW 14162-C; Color Fastness to Artificial Weathering Color Fastness to Artificial Weathering C: Light Exposure Cycle Only (115 °C Bst)
392. GM/Opel GMW 14162-D; Color Fastness vs Artificial Weathering D Color Fastness versus Artificial Weathering D: Light and Dark Exposure Cycle
393. GM/Opel GMW 14171; Heavy Layer Sound Barriers
Decoupler Assemblies 394. GM/Opel GMW 14188; Squeak and Rattle Distortion (Subassembly, Subsystem, and Component) Evaluation Procedure
395. GM/Opel GMW 14193; Radiator Product and Test Procedure Specification
396. GM/Opel GMW 14194; Fibrous Sound Absorbing MaterialsSound Absorbing Materials
397. GM/Opel GMW 14201; Mirror Vibration Assessment Procedure
398. GM/Opel GMW 14227; Study Data Collection Main Test Procedure
399. GM/Opel GMW 14231; Material Specification TextiliTR – Interior Trim Fabrics Interior Upholstery Fabrics Made of Knitted, Woven, Non-Woven or Non-Conventional Fiber Textile Materials. Also for Laminated Fabric Constructions and Synthetic Suede Covers. – Covering Fabrics Used in Type A, Seating and Door Sill Panels. – Type B, Covers Overhead Fabrics (Ceiling Cover, Visor and Sunshade), Column. Windlass and Rear Window Trims, – Type C, Covers Fabrics Used in Instrument Panel Covers.-
400. GM/Opel GMW 14236; Formaldehyde from Molded Parts
Emission In-Vehicle 401. GM/Opel GMW 14264; Subjective Rating Scale
402. GM/Opel GMW 14296; Sweating Resistance
403. GM/Opel GMW 14333; Resistor Fuels Exterior Automotive Materials Components
404. GM/Opel GMW 14334; Chemical Resistant Liquids
405. GM/Opel GMW 14339; Wheel Trim Drop Test Procedures
406. GM/Opel GMW 14357; PR procedures Identification of Test Cellular Related Materials Resistance Aging Moisture
407. GM/Opel GMW 14357 (Moisture aging / Autoclave > 100 °C); Test Procedures for Moisture Resistance Aging Cellular and Related Materials - Determination of Moisture Aging Resistance-
408. GM/Opel GMW 14357 (Moisture aging / < 100 °C in glass container); Moisture Aging for Cellular and Related Materials - Determination of Moisture Aging Aging
409. GM/Opel GMW 14357 2017-03; cellular and related materials
for - Determination of Moisture Resistance to Aging 410. GM/Opel GMW 14363; Determination of Indent Hardness of Constant Force Foam Components
411. GM/Opel GMW 14364; Entry/Exit/Bounce Seat Endurance Test Procedure Indoor – Entry/Exit / Concussion Seat Endurance Test –
412. GM/Opel GMW 14444; Material-Related Internal Part Performance
413. GM/Opel GMW 14444-§ 3.3.7-§ 3.3.7; Compatibility / Migration Painting, Compatibility / migration painting Material related internal part performance
414. GM/Opel GMW 14445; SunscreEN Insect Repellent Resist
415. GM/Opel GMW 14458; Copper Accelerated Acetic Acid Salt Spray (Cass) Test
Procedure for 416. GM/Opel GMW 14485; Noise and Vibration Subjective Assessment Procedure
417. GM/Opel GMW 14552; Wind Management Structure Wind Management Structure
418. GM/Opel GMW 14553; Material Specification Textile – Safety Shade Fabric Safety Shade Fabric / For Fabrics Used in Rear Cargo or Window Areas. Fabrics within the scope of this specification are made of fibrous textile materials whose structure is knitted or woven.-
419. GM/Opel GMW 14596; Steering Assembly, Heat Decay
420. GM/Opel GMW 14613; General Inspection Procedure, Engineering Drawing, or Inspection Per Specification
421. GM/Opel GMW 14650; Performance Requirements Exterior Plastic Parts
422. GM/Opel GMW 14651; Material-Related Interior Plastic Part Performance Monolithic Plastic Parts Injection Molded Plastic Surfaces
423. GM/Opel GMW 14665; Anodic Oxidation Coating on Aluminum
424. GM/Opel GMW 14668; Immersion Corrosion Metals
425. GM/Opel GMW 14668-§ 3.2.3.1-§ 3.2.3.1; Surface Surface Stress Test (for Abs only), Surface Surface Stress Test (for ABS only) Minimum performance requirements for decorative chrome plated plastic parts
426. GM/Opel GMW 14668-§ 3.2.3.2-§ 3.2.3.2; Surface Surface Stress Test (For Abs+Pc only), Surface Surface Stress Test (for ABS+PC only)Minimum performance requirements for decorative chrome plated plastic parts
427. GM/Opel GMW 14669; Organic Coating/Finish Performance Exterior Interior Metallic Materials
428. GM/Opel GMW 14671; Organic Coating Performance Underbody Components
429. GM/Opel GMW 14671-§ 4.7.1; Oil Resistance, Oil resistance Organic coating performance for under-hood and underbody components
430. GM/Opel GMW 14671-§ 4.7.3; Battery Acid Resistance, Battery acid resistance Organic coating performance for under-hood and underbody components
431. GM/Opel GMW 14681; Sealing Test of Sealing Systems in Fuel Line Systems.
432. GM/Opel GMW 14685; Termination ComPR requirement Cellular Elastomer at a Defined Deviation
433. GM/Opel GMW 14688; Scratch and Mar Resistance
434. GM/Opel GMW 14688 (GMW 14688); Rayure Et Résistance À L'Abrasion / Scratch and Mar Resistance
435. GM/Opel GMW 14688-A; Scratch resistance Scratch and
degradation resistance Method A: Scratch Resistance 436. GM/Opel GMW 14695; Cohesion Strength
Determination of Cohesive Strength of Felt and Similar Materials - 437. GM/Opel GMW 14698; Scratch Resistant Organic Coatings Self Adhesive Foils
438. GM/Opel GMW 14698-A; Scratch resistance (ErichsEN Hardness Test Stick Type 318) Scratch resistance of organic coatings and self-adhesive foils Method A: ErichsEN Hardness Test Stick Type 318
439. GM/Opel GMW 14698-B; Scratch resistance Scratch resistance of organic coatings and self-adhesive foils Method B: Five Arm Tester
440. GM/Opel GMW 14700; Stone Impact Resistance Coatings
441. GM/Opel GMW 14701; Resistance Coatings Chemical Etching Deterioration
442. GM/Opel GMW 14704; Adhesion of Organic Coating After Storage in Warm Water
443. GM/Opel GMW 14711; Determination of Specific Bulk Resistivity of Elastomers, Plastics and Adhesives
444. GM/Opel GMW 14712; Adding/Removing - Weather Strips
445. GM/Opel GMW 14722; Material Specification – Elastomeric Floor Matselastomeric Mats-
446. GM/Opel GMW 14729; The PR performs the High Humidity Test 447.
GM/Opel GMW 14729-A; High Humidity Test (water mist) Procedures for high humidity Test Option A: Water Mist
448. GM/Opel GMW 14729-B; High Humidity Test (wet sole) Procedures for high humidity Test Option B: Wet Sole
449. GM/Opel GMW 14735; Determination of Permanent Set Properties of Elastomeric Components
450. GM/Opel GMW 14738; Master Test Procedure for Determining Dynamic Stiffness and Angle of Loss of Elastomeric Components
451. GM/Opel GMW 14757; of elastomers
Determination of Adhesion to Glass, Painted Sheet Metal, or Other Mating Material 452. GM/Opel GMW 14775; Snag Resistance Snag Resistance of Textile Materials -
453. GM/Opel GMW 14777; Test Method for Determining Moisture Content, Water Absorption and Thickness Swelling of Hardboard, Particleboard, Cardboard and Similar Rigid Materials
454. GM/Opel GMW 14785; Coolant Connection Pressure Vibration Temperature (Pvt) Cycle Test
455. GM/Opel GMW 14797; Exterior Plastic Engine Compartment Painted Parts Performance Requirements
456. GM/Opel GMW 14829; Tape Adhesion Test Paint Coatings
457. GM/Opel GMW 14829-A; Paint Adhesion Test (Crosshatch) Tape Adhesion Test for Paint Coatings Method A: Cross Hatch Test
458. GM/Opel GMW 14829-B; Paint Adhesion Test (X-cut Test) Tape Adhesion Test for Paint Coatings Method B: X-Cut Test
459. GM/Opel GMW 14864; Dyeing Due to Sulfur Dioxide (So2) and Hydrogen Sulfide (H2S) Procedure for Determining the Dyeing of Ornamental Materials Due to Sulfur Dioxide, So2 and Hydrogen Sulfide, H2S-
460. GM/Opel GMW 14865; Determination of Scratch Resistance of Organic Coatings – Simulation of Car Wash Plants
461. GM/Opel GMW 14867; Performance Requirements Inner Plastic
Surface Paints 462. GM/Opel GMW 14867-§ 3.3-§ 3.3; Curing Test, Hardening Test Performance requirements of paints on interior plastic surfaces
463. GM/Opel GMW 14867-§ 3.6-§ 3.6; Effects of Cleaners and Lotions, Effects of Cleansers and Lotions Performance requirements of paints on interior plastic surfaces
464. GM/Opel GMW 14872; Cyclic Corrosion Test
465. GM/Opel GMW 14872 (GMW 14872); Cyclic Corrosion Lab Test / Cyclic Corrosion Lab Test
466. GM/Opel GMW 14872 (Opel); Cyclic Corrosion Laboratory Test –
467. GM/Opel GMW 14885; Painted Aluminum Road Wheels
468. GM/Opel GMW 14885-§ 4.4.13.2; Accelerated Weathering (Xenon-Arc-Test), Accelerated WeatheringPainted aluminum road wheels – Paint performance requirements
469. GM/Opel GMW 14892-§ 3.1.5; Peel Strength, Peel Strength
Adhesion requirements for bonded internal parts 470. GM/Opel GMW 14892-§ 3.4 (peel strength); Adhesion Adhesion Requirements Adhesion Cores – Peel Strength –
471. GM/Opel GMW 14892-§ 3.5 (image); Adhesion, Visual Assessment Adhesion Requirements for Adhesive Internal Parts – Adhesion, Visual Assessment-
472. GM/Opel GMW 14914; Test Fluids Fuel Endurance Test
473. GM/Opel GMW 15058; Polyurethane Foam Coated Underground Flooring Trim Pads
474. GM/Opel GMW 15143; Air Induction Duct Performance and Durability Test
475. GM/Opel GMW 15272; Corrosion Performance Specification
476. GM/Opel GMW 15282; Corrosion/Undercut Scribe Creepback
477. GM/Opel GMW 15284; Stainless
Spot Test for Wear Susceptibility in Steel 478. GM/Opel GMW 15306; Wheel Trim Vibration: Shaker Table and Tramp Resonance Test
479. GM/Opel GMW 15308; External Subsystems Solar Exposure Test
480. GM/Opel GMW 15310; Coolant System Balancing Tank Assembly
481. GM/Opel GMW 15356; Sheet Metal Grading Scale
482. GM/Opel GMW 15357; Component Rating Scale
483. GM/Opel GMW 15358; Fastener Rating Scale
484. GM/Opel GMW 15359; White Corrosion Rating Scale Guide Gmw 15635 Determination of Aldehyde Ketone Emissions From Ingredient
485. GM/Opel GMW 15377; Dyeing and Cleaning of Leather and Plastic Rolled Goods-
486. GM/Opel GMW 15432; Irradiation Test
487. GM/Opel GMW 15432-A-Irradiation Test Irradiation Test; Code A: 3 Cycles in Radiation Chamber (Mit Ir Heaters)
488. GM/Opel GMW 15432-B-Irradiation Test Irradiation Test; Code B: 1 Cycle in Radiation Chamber
489. GM/Opel GMW 15449; Pressure Testing of Non-Metallic Fuel Tanks
490. GM/Opel GMW 15468; Polyamide Cooler
Hydrolytic Resistance to Plastics 491. GM/Opel GMW 15487; Determination of Abrasion Resistance of Organic Coating
492. GM/Opel GMW 15564; Long Term Load Loss Kit Evaluation for Weatherstrips
493. GM/Opel GMW 15634; Evaluation Acc. Gmw 3059 - Determination of Volatile and Intermediate Volatile Organic Compounds Determination of Volatile and Semi-Volatile Organic Compounds in Automotive Interior Materials -
494. GM/Opel GMW 15635; Determination of Aldehyde and Ketone Emissions from Indoor Materials
495. GM/Opel GMW 15651; Martindale, Wear
496. GM/Opel GMW 15654; Vehicle Interior
Determination of Volatile and Semi-Volatile Organic Compounds from Air 497. GM/Opel GMW 15702; Material Specification Plastics - Plastic Molding Components
498. GM/Opel GMW 15735; Storage Stability Adhesives
499. GM/Opel GMW 15793; Ice Scraper Damage Test window Gaskets and Moldings – Ice Scraper Damage Test –
500. GM/Opel GMW 15816; Thermoplastic Elastomers – Polyolefinic, Fully Crosslinked, Indoor, Integrally Colored.G. Gasket Belt Levers, Key
Teams, Mats-501. GM/Opel GMW 15891; Painted Metal or Plastic Surfaces
Solvent Rubbing Method for Determining Cure 502. GM/Opel GMW 15919; Thermal Shock Test Paint Adhesion
503. GM/Opel GMW 15992; Rear Compartment Load
Performance Tests for Arms on the Base 504. GM/Opel GMW 16128; Mildew-Mixed Fungus Resistance – Mixed Culture Method
505. GM/Opel GMW 16214; Typical Applications of Polypropylene Expanded Bead Foam The following include Buffer Energy Absorbers, Knee Supports.
506. GM/Opel GMW 16284; Brake Rotor Cover
507. GM/Opel GMW 16348; Functional,
Invisible, Interior Trim System Minimum Material Performance Requirements 508. GM/Opel GMW 16443; Adhesion Performance Requirements Adhesive
Foam Back 509. GM/Opel GMW 16526; This
SuctionWater Absorption- 510. GM/Opel GMW 16597; Carpet Materials for Non-Floor Applications - Material Properties of Carpet Materials Suitable for Non-Floor Applications such as Rear Seat Backs, Lower Door Trim, Foot Bar Covers, Luggage Cover, Load Floor Areas, Lower Dashboards and Consoles. -
511. GM/Opel GMW 16745; Water Jet Test
512. GM/Opel GMW 16774; Flock Ashing Tests for Weatherstrips
513. GM/Opel GMW 16853; General Specification – General Emission of Ingredient and Components
Comprehensive Standard for Testing (Fogging, Odor, Emissions, Carbonyls, Amines)-514. GM/Opel GMW 16862; Calcium Chloride Corrosion Resistance – Test for Chrome Plated Exterior Parts
515. GM/Opel GMW 16879; Performance Requirements Ultra High Molecular Weight Polyethylene (Uhmw Pe) Tape
516. GM/Opel GMW 16998; Fiber Sound Absorber
Dust Removal from Pad 517. GM/Opel GMW 3007 TM-60 / Draft (BST 100 °C); Determination of Color Fastness from Artificial Light Determination of Color Fastness from Artificial Light Code 2: 100 °C
518. GM/Opel GMW 3010; Determination of Tensile Elongation PR operations
519. GM/Opel GMW 3013; General Requirements Processing Technical Conditions Delivery Plastics
520. GM/Opel GMW 3016; Testing for Organic Volatiles in Concealers and Adhesives, Organic Volatiles in Concealers and Adhesives -
521. GM/Opel GMW 3026; Light
Fastness 3.3 522. GM/Opel GMW 3026 3.2.1; Weight 3D
523. GM/Opel GMW 3026 3.2.10; Fragrance 8D
524. GM/Opel GMW 3026 3.2.11; Mold 15D
525. GM/Opel GMW 3026 3.2.12; Fogging 10D
526. GM/Opel GMW 3026 3.2.13; Flammability-After Picked and Aged 13D
527. GM/Opel GMW 3026 3.2.14; Dimensional Stability 8D
528. GM/Opel GMW 3026 3.2.2; Stack Height 3D
529. GM/Opel GMW 3026 3.2.3; Thickness 3D
530. GM/Opel GMW 3026 3.2.4; Breaking Load 5D
531. GM/Opel GMW 3026 3.2.5; Trousers Tear Resistance
532. GM/Opel GMW 3026 3.2.6; Resistance to Cracking Without Bending at Cols Temperature.
533. GM/Opel GMW 3026 3.2.7; Loop Pile Pullout 5D
534. GM/Opel GMW 3026 3.2.8; Wear Resistance 5D
535. GM/Opel GMW 3026 3.2.9; Stability of Materials Against Mechanical Load 5D
536. GM/Opel GMW 3026 3.3.1; Colorfastness to Artificial Light 24D Up to 5 Colors
537. GM/Opel GMW 3026 3.3.3; Fiber Degradation 15D
538. GM/Opel GMW 3026 3.3.4; Paint Migration 8D
539. GM/Opel GMW 3026 3.3.5; Color Crock 5D
540. GM/Opel GMW 3026 3.3.6; Water Staining / Waterproof 8D
541. GM/Opel GMW 3026 3.3.7; Cleanability and Soil Strength 10D
542. GM/Opel GMW 3044; Galvanized
543. GM/Opel GMW 3059; Restricted and Reportable Substances Parts
544. GM/Opel GMW 3091; General Features Tools, Electromagnetic Compatibility
545. GM/Opel GMW 3097; General Specification Electrical / Electronic Components Subsystem, Electromagnetic Compatibility
546. GM/Opel GMW 3103; General Specification Electrical / Electronic Components Subsystem, Electromagnetic Compatibility Global EMC Component / Subsystem Validation Accepted PR ocess
547. GM/Opel GMW 3116; Recyclability/Recoverability Guidelines
548. GM/Opel GMW 3154; Mandrel Bend Test Mandrel Bend Test –
549. GM/Opel GMW 3172; General Specification Electrical/Electronic Component Analytical/Development/Validation (A/D/V) PR procedures Compliance Vehicle Environmental, Reliability, Performance Requirements
550. GM/Opel GMW 3172 (GMW 3172); Specification Générale Pour Élément Électrique/Électronique – Environment / Durabilité. / General Specification for Electrical/Electronic Components – Environmental / Durability.
551. GM/Opel GMW 3182; Determining Mass Per Area Gme 60301
Replaced 552. GM/Opel GMW 3191; Connector Test Verification Specification
553. GM/Opel GMW 3205; Test Method Resistance Determination Odor PR opagation Ingredient
554. GM/Opel GMW 3205 (GMW 3205); Determination of Odor Emission Resistance of Indoor Materials / Determination of Odor Emission Resistance of Indoor Materials
555. GM/Opel GMW 3205-A (70°C, with water); Odor (Variant A)Determination of resistance to odor emission of indoor materials Coding A: Wet Condition, 70 °C
556. GM/Opel GMW 3205-B (70°C, anhydrous); Odor (Variant B)Determination of resistance to odor diffusion of interior materials Coding B: Dry Condition, 70 °C
557. GM/Opel GMW 3205-C (105°C, anhydrous); Odor (Variant C)Determination of resistance of indoor materials to odor emission Coding C: Dry, High Temperature Condition, 105 °C
558. GM/Opel GMW 3208; Rotary Abrasion Test, Taber Type
559. GM/Opel GMW 3211; Resistance Stretch Set
560. GM/Opel GMW 3217; Ravel ResistanceRavel Resistance-
561. GM/Opel GMW 3220; Laminate Bond StrengthLaminate Bond Strength -
562. GM/Opel GMW 3221; PR process Standard Conditioning Organic Materials
563. GM/Opel GMW 3221 (Code A); Standard Conditioning Procedure for Standard Conditioning of Organic Materials Code A: (22 ± 3) °C Und (50 ± 5) % Rh
564. GM/Opel GMW 3232; Automotive Flammability Individually Burning
565. GM/Opel GMW 3232 (GMW 3232); Determination of Flammability of Interior Flooring Materials / Determination of Flammability of Interior Flooring Materials
566. GM/Opel GMW 3235; Fogging Properties Trim Materials
567. GM/Opel GMW 3235 (GMW 3235); Fogging Properties of Trim Materials / Fogging Properties of Trim Materials
568. GM/Opel GMW 3235-A; Fogging Properties of Flooring Materials (Photometric Method) Fogging Properties of Flooring Materials Method A: Photometric Method (Fogging F)
569. GM/Opel GMW 3235-B; Fogging Properties of Trim Materials (Gravimetric Method) Fogging Properties of Trim Materials, Method B- Gravimetric Method (Fogging G)
570. GM/Opel GMW 3259; Mold Resistance
571. GM/Opel GMW 3274; Pile Distortion-Mechanical
572. GM/Opel GMW 3283; Schopper Abrasion Abrasion Test schopper Abrasion Abrasion Test –
573. GM/Opel GMW 3286; PR process Neutral Salt SPR month Test
574. GM/Opel GMW 3326; Tear Strength Textile Materials by Trapezoid Method
575. GM/Opel GMW 3347; Lint Removal and Retention of Textile Materials
Gathering and Holding - 576. GM/Opel GMW 3359; Non-Electrolytic Applied Zinc Rich Coating
577. GM/Opel GMW 3387; Procedure for Determining Fiber Degradation of Automotive Textiles
578. GM/Opel GMW 3390; Procedure for Determining Elasticity of Automotive Upholstery Materials
579. GM/Opel GMW 3402; Soil Cleaner Resistant Automotive Materials
580. GM/Opel GMW 3402-A; Soil
resistanceSoil and cleaner resistance of automotive materials Procedure A: Earth Resistance 581. GM/Opel GMW 3402-B; Cleaner ResistSoil and cleaner resistance of automotive materials Procedure B: Cleaner Resist
582. GM/Opel GMW 3405; Sewing Fatigue Automobile Textiles
583. GM/Opel GMW 3414; Artificial Materials of Automotive Interior Upholstery
Decomposition 584. GM/Opel GMW 3431; General PR procedures,
Testing 585 Switches. GM/Opel GMW 3431 (GMW 3431); Testing Switches / Testing Switches
586. GM/Opel GMW 3431(Paragraph 4.3.14.1); General Public Relations, Test Keys 587.
GM/Opel GMW 4089; PR process Laminate Curl Determination of PR processes Foam Laminate Materials
588. GM/Opel GMW 4090; Detection Knitting Yarn Count
589. GM/Opel GMW 4141; Heap Decay – Environmental
590. GM/Opel GMW 4217; Dimensional Stability
591. GM/Opel GMW 4659; Compatibility Flooring Materials
592. GM/Opel GMW 4700; Zinc Alloy Plating
593. GM/Opel GMW 4726; Water Repellent PR operations Automotive Textiles
594. GM/Opel GMW 4749; Pilling Properties for Determination of Pilling Properties of Automobile Textiles
Procedure - 595. GM/Opel GMW 4750; Color Reading-Color Reading- for Automotive Fabrics
596. GM/Opel GMW 6754-A; Determination of electrostatic behavior Determination of electrostatic behavior of automotive textiles Method A: Electrostatic Resistance
597. GM/Opel GMW 6992; Visual Evaluation Automotive Upholstery
598. GM/Opel GMW 7293; Subjective Subsystem/Component
Squeak Rattle Test 599. GM/Opel GMW 7294; Stability Squeak Rattle Rating
600th GM/Opel GMW 7699; Squeak and Rattle Evaluation of Entertainment System Drivensqueak and Rattle Test
601. GM/Opel GMW 8081; Static Headspace Gc Ms Internal Materials Internal Emissions
602. GM/Opel GMW 8081 (GMW 8081); Static Head Space Gc-Ms for Interior Materials / Static Head Space Gc-Ms for Interior Materials
603. GM/Opel GMW 8518; Subjective Squeak and Rattle Rating: Vehicle Level
604. GM/Opel GMW 9538; Weather Exposure Test s Interior Trims
605. GM/Opel GMW BS 97034-6 B; Soiling Behavior and Cleaning Ability (Martindale) Surface Testing of Motor Vehicle Interior Materials - Contamination Behavior and Cleaning Ability B-
606. GM/Opel QK 000 102; Polyamide 6 Fiberglass Polyamide 6 Fiberglass
607. GM/Opel QK 002 000; abs
608. GM/Opel QK 003 500; Te (Epdm-X + Pp)
609. GM/Opel QK 003 800; PolyPR opilen Filled Material Types PolyPR opilen Material Types Fillers
610. GM/Opel QK 006 600; Pbt – Gt .Pbt – Gb ..
611. GM/Opel QK 007 000; S / Eb / S Material Types Material Types
612. GM/Opel QT 12 6595; Electrical Cables for Motor Vehicles
Ready to Connect 613. GM/Opel QU 000 000; Rules Regarding the Admissibility of Dangerous Goods Permission for Dangerous Goods
Regulation on Issue 614. GM/Opel QU 000 001; Requirements for Enforcement of Environmental Laws Requirements for Enforcement of Environmental Public Relations Law
615. GM/Opel QU 000 003; Environmental PR practice Regime for Cfc Halo PR ban Environmental PR practice regimen for Cfc Halo PR ban
616. GM/Opel QU 000 005; Environmental Regulation for Phenol PR prohibition Environmental PR prohibition Phenol PR prohibition Adjust according to 617
. GM/OpelTM 228400; Material Properties Body Equipment Slim
Serrated Loop - Carpet Carpet - 618. GM/Opel TM 589800; Engineering Material Specification – Polyurethane Foam-