TSM Standards Tests

EUROLAB With its expert team and state-of-the-art laboratories, it offers reliable and unbiased results in automotive tests, as in all other tests.

Automakers have merged in the past, so there are many cases where these features are widely used by every automaker. In addition, LV 112 and LV 214 standards for electrical connectors are being developed with the joint participation of automobile manufacturers such as Audi, BMW, Daimler, Porsche and Volkswagen.

Therefore, Daimler, Benz, Chrysler, Volkswagen, Renault, Nissan etc. Please check the standard number regardless of the name of the finished vehicle manufacturer, such as Among these features, the name of the finished vehicle does not matter.

• TSM 0501 ; Light Resistance
• TSM 0501G ; specific gravity
• TSM 0502G ; Wear resistance
• TSM 0503G ; Fogging Method B and C
• TSM 0505G ; Smell of Non-Metallic Materials
• TSM 1100G ; Abrasion Resistance Against Paint Film
• TSM 1100G ; Wear Resistance Test Against Glass
• TSM 1100G ; Adhesion Test
• TSM 1100G ; Air Aging Resistance
• TSM 1100G ; cold resistance
• TSM 1100G ; Low Temperature Adhesion
• TSM 1100G ; Ozone Resistance
• TSM 1100G ; Paint Film Contamination
• TSM 1100G ; Chapter 5 Foam Density
• TSM 1100G ; Section 8.8 Water Resistance
• TSM 1100G ; water absorption
• TSM 1100G ; Weathering Resistance
• TSM 1100G (8.13.5) ; Painted Surface Adhesion 8.13.5
• TSM 1100G (8.16.1, 8.16.2); Whitening Resistance
• TSM 1100G (8.16.3) ; Whitening Resistance - Method C
• TSM 1100G, 7.1; Low Tensile Stress
• TSM 1100G, 7.2; Tensile Strength and Elongation Test
• TSM 1100G, 7.3 ; Tear Strength
• TSM 1100G, 7.6; compression set
• TSM 1100G, 7.7; Break Time at High Temperature Elongation
• TSM 1100G, 8.5 ; Flexibility
• TSM 1100G, 8.7; Flexibility Under Pressure Load
• TSM 1500G Section 5.18 ; Contact Painting Test
• TSM 1500G Section 5.19 ; Contactless Painting Test
• TSM1707G ; Section 7.2.7 Cold Resistance Test
• TSM1707G ; Adhesion Resistance Test
• TSM 1707G Section 7.2.4 ; Sliding Load Test
• TSM 1707G Section 7.2.6 ; Ozone Resistance Test
• TSM 1707G Section 7.2.8 ; Paint Film Staining Resistance Test
• TSM 1707G Section 7.2.9 ; Abrasion Resistance Test (Abrasion)
• TSM 1707G, 7.2.3; Compression Load Deviation
• TSM 1707G, 7.2.9; Wear Resistance Test
• TSM1708G ; Adhesion Test
• TSM1708G ; Lip Compression Set Test
• TSM 1708G Section 5.3.10 ; cold resistance
• TSM 1708G Section 5.3.18 ; Whitening Resistance Test
• TSM 1708G Section 5.3.12 ; Heated Size Change Rate
• TSM 1708G Section 5.3.14 ; Paint Painting
• TSM 1708G Section 5.3.16 ; Surface Treatment Performance Test
• TSM 1708G Section 5.3.17 ; Adhesion Test
• TSM 1708G Section 5.3.3 ; Wear resistance
• TSM 1709G Section 5.2.8 ; Polyvinyl Chloride Molding Painting Test
• TSM 1718G Section 5.3.14 ; frictional resistance
• TSM1718G ; Grease Resistance
• TSM 1718G Section 5.2.9 ; wax remover
• TSM 1718G, 5.3.17; Tensile Strength
• TSM 1718G Section 5.3.4 ; Wear resistance
• TSM 1718G Section 5.3.12 ; Dimensional Change with Heat
• TSM 1718G Section 5.3.13 ; Paint Film Painting
• TSM 1718G Section 5.3.17 ; Tensile Strength
• TSM 1718G, 5.3.11 ; Permanent Set Test for Lips
• TSM 1718G, 5.3.20; Lateral Tensile Strength
• TSM 1722G, 7.1; Sand Trapped Paint Film Abrasion Resistance Test
• TSM 4411G, 8.5; Flexibility Test
• TSM 5728G Section 5.9.2 ; Accelerated Weathering Resistance
• TSM 5740G Section 6.9.2 ; Accelerated Weathering Test
• TSM 5746G (5.5); Paint Film Contamination Resistance
• TSM 7607G Section 5.10 ; Fluid Resistance Test
• TSM 7607G Section 5.4 ; Water Resistance Test
• TSM 7607G Section 5.5 ; Moisture Resistance Test
• TSM 7611G (7.3.5, 7.3.6); Cooling/Humidity/Heating Cycle Test
• TSM 7611G (7.4.1); Fluid Resistance Test
• TSM 7611G Section 7.3.12 ; Adhesion Test Between Core and Lip or Design Section
• TSM 7611G Section 7.3.2 ; Heat Aging Test
• TSM1100G, 8.13.6; Painted Surface Adhesion Strength Method E
• TSM1707G (7.2.12) ; Glass Surface Stain Adhesion (High Temperature/Room Temperature)