Daimler Standards Tests

Automakers have merged in the past, so there are many cases where these features are widely used by every automaker. In addition, LV 112 and LV 214 standards for electrical connectors are being developed with the joint participation of automobile manufacturers such as Audi, BMW, Daimer, Porsche and Volkswagen. 

Therefore, Daiiller, Benz, Chrysler, Volkswagen, Renault, Nissan etc. Please check the standard number regardless of the name of the finished vehicle manufacturer, such as Among these features, the name of the finished vehicle does not matter.

Daimler standards are listed below.

1. Daimler 302; flammability
2. Daimler A1690052499; Korrosionsprogramm Fur Klimaverdampfer
3. Daimler A21.10.01,-§ 4.6; Tooth Strength Standard Function Test Program – Ground / Function, § 4.6 Ridge Strength -
4. Daimler AG PAPP PWT 7517; Determination of Nitrosamine Emission by Measuring Nitrosamine Emission from Elastomeric Parts Used in Passenger Compartment -
5. Daimler DBL 5306; General Technical Delivery Requirements Test Methods Materials Internal Hardware Similar Articles
6. Daimler DBL 5306 2008-12-§ 6.1; Heat Resistance - Loose Exposure, General technical delivery conditions and Test methods for Interior fittings and similar products
7. Daimler DBL 5306 2008-12-§ 7.3; Cold Resistance – Ball Drop Test, General technical delivery conditions and Test methods for interior hardware materials and similar products
8. Daimler DBL 5306 Procedure B; Fogging – Gravimetric
9. Daimler DBL 5306-§ 1.1; Bending Hardness, Bending stiffness General technical delivery conditions and Test methods for interior hardware materials and similar products
10. Daimler DBL 5306-§ 15.2; Clutch Indentation Measurement, Clutch Indentation Measurement General technical delivery conditions and Test methods for interior hardware materials and similar products
11. Daimler DBL 5306-§ 16; Foam Adhesion, Foam Adhesion General technical delivery conditions and test methods for interior fittings and similar products
12. Daimler DBL 5306-§ 19.3; Coefficient of Friction with Shear/Adhesive Friction, Coefficient of Friction with Shear/Adhesion Friction General technical delivery conditions and test methods for interior fittings and similar products
13. Daimler DBL 5306-§ 2; Blocked Resistance, Blocked Resistance General technical delivery conditions and test methods for interior hardware materials and similar products
14. Daimler DBL 5306-§ 20; Contact Painting, Contact painting General technical delivery conditions and test methods for interior fittings and similar products
15. Daimler DBL 5306-§ 25; Tear Resistance Stitch Tear Resistance (§ 25.1) or Edge Thread Pull Resistance (§ 25.2), Tear resistance General technical delivery conditions and Test methods for interior fittings and similar products
16. Daimler DBL 5306-§ 26.1.1; Standard Atmospheric Peel Tensile Test, Peel adhesion General technical delivery conditions and Test methods for trim materials and similar products
17. Daimler DBL 5306-§ 26.1.3; Standard Atmospheric Shear Tensile Test, Standard Atmosphere Shear Tensile Test General technical delivery conditions and test methods for interior hardware materials and similar products
18. Daimler DBL 5306-§ 26.1.4; Heat Shear Tensile Test, Heat Shear Tensile Test General technical delivery conditions and test methods for interior hardware materials and similar products
19. Daimler DBL 5306-§ 3.1; Scratch Resistance (Nail or Knife), Scratch resistance (with nail) General technical delivery conditions and test methods for interior hardware materials and similar products
20. Daimler DBL 5306-§ 3.2-§ 3.2; Chisel exposure, chisel exposure General technical delivery conditions and test methods for interior fittings and similar products
21. Daimler DBL 5306-§ 4.1 (DIN EN ISO 105-X12)-§ 4.1; Abrasion Resistance, Abrasion resistance General technical delivery conditions and test methods for interior hardware materials and similar products
22. Daimler DBL 5306-§ 6.1; Heat Resistance – Loose Exposure, Heat Resistance – Loose Exposure General technical delivery conditions and test methods for interior fittings and similar products
23. Daimler DBL 5306-§ 6.2; Heat Resistance - Folded Exposure, Heat Resistance - Folded Exposure General technical delivery conditions and Test methods for interior fittings and similar products
24. Daimler DBL 5306-§ 7.1; Cold Resistance - Folded Exposure, Cold resistance - Folded exposure General technical delivery conditions and Test methods for interior fittings and similar products
25. Daimler DBL 5306-§ 7.2; Cold Resistance - Bending Exposure, Cold Resistance - bending exposure General technical delivery conditions and test methods for interior fittings and similar products
26. Daimler DBL 5306-§ 7.3; Cold Resistance - Ball Drop Test, Cold Resistance - Ball Drop Test General technical delivery conditions and test methods for interior hardware materials and similar products
27. Daimler DBL 5306-§ 8.1; Permanent Deformation After Constant Load, Dry Method Permanent deformation after constant load - dry method General Technical Delivery conditions and Test methods for interior hardware materials and similar products
28. Daimler DBL 5306-§ 8.2; Permanent Deformation after Constant Load, Permanent deformation - wet method General technical delivery conditions and Test methods for interior fittings and similar products
29. Daimler DBL 5306-§ 9.3; Contamination Behavior (Martindale Method, Standard Contamination Material)-
30. Daimler DBL 5306-§ 9.4; Cleaning Behavior-
31. Daimler DBL 5307; Reduced Flammability, Mils Interior Vehicle Requirements Test Code
32. Daimler DBL 5307 (Daimler DBL 5307); Fire Retardant Properties / Flame Retardant Properties
33. Daimler DBL 5307.10; flammability
34. Daimler DBL 5307-§ 5.1; Supply Specification Flame retardant properties – § 5.1: Test for determining the horizontal burning rate of materials All interior lining materials of passenger cars, multi-purpose passenger cars, commercial vehicles and buses. Additional Seat Accessories, Side and Rear Panel Covers, Materials with Thermal and/or Acoustic Functions, Floor Covers, Luggage Racks, Heating and Ventilation Hoses, Trim Panels, Lighting for buses with more than 22 seats.
35. Daimler DBL 5310; Supply Specification – Leather for Interior Equipment for Leather for Interior Equipment.-
36. Daimler DBL 5310-§ 7.11; Color Stability Interior Leather – Color Stability-
37. Daimler DBL 5311; Supply Specification Leatherleather, EG for Keychain, Vehicle Document Wallets-
38. Daimler DBL 5327; Supply Specification for Weaving Processes for Woven, Plain Fabric, WovEN Upholstery Fabric and Flat Fabric Used in Vehicle Interiors.
39. Daimler DBL 5330; Supply Specification – WovEN Faux Leather ClothwovEN Faux Leather Fabric, EG Ski Bag-
40. Daimler DBL 5333; Supply Specification - Films and Sheets Abrasion Protection in Euro Velor for All Model Series -
41. Daimler DBL 5348; Delivery Specification Foamed and Compact Artificial Leather Foamed and Compact Artificial Leather-
42. Daimler DBL 5381; SPR moon Powder Skins
43. Daimler DBL 5399; Evobus, Contamination and Cleanability Part 2 + Part 3 Dbl 5399 § 3.3 + 3.4 below: Textile (for Normal Load): Contamination and Cleaning Behavior, Daimler – Test Methods for Interior Materials and Similar Products
44. Daimler DBL 5399.30; Soiling and Cleanability Behavior Textiles Based on Dbl 5399 Soiling and Cleanability Behavior of Textiles
45. Daimler DBL 5399-§ 3.2-§ 3.2; Cleaning and Care Products Resistance, Cleaning and care products
resistanceSupply specification - contamination / cleaning of interior parts / materials 46. Daimler DBL 5399-§ 3.3 + 3.4 (Martindale)-§ 3.3 &-§ 3.4; Soiling and Cleanability Behavior (Martindale), Soiling and Cleaning behaviorSupply characteristics – soiling / cleaning of interior parts / materials
47. Daimler DBL 5399-§ 3.3 + 3.4 A1-§ 3.3 And-§ 3.4; Soiling and Cleanability Behavior, Soiling and Cleaning behaviorSupply specification – contamination/cleaning of interior trim parts/-materials
48. Daimler DBL 5400; Components Made from Glass Fiber Reinforced Thermosets
49. Daimler DBL 5401; Delivery Instructions – Parts of Duroplastic Materials in the Engine and Aggregate FieldDuroplastic Materials-
50. Daimler DBL 5403; Functional Parts for Engine Made of Thermoplastic Materials and Sub-Assembly Applications for Thermoplastics for Use in Engine Components.-
51. Daimler DBL 5404; Parts Thermoplastic Materials Direct Indirect Area Passenger Compartment, Passenger Compartment Heater, Passenger Compartment Ventilation, Panel Housing
52. Daimler DBL 5404-§ 4.2; Durability to care products, durability to care products Parts made of thermoplastic for the direct and indirect areas of the passenger compartment
53. Daimler DBL 5404-§ 7.14; Resistance to Cosmetics, Resistance to Cosmetics Parts made of thermoplastic for the direct and indirect areas of the passenger compartment
54. Daimler DBL 5404-§ 7.15; Maintenance Agents Resistance, Maintenance Agents Resistance Parts made of thermoplastic for the direct and indirect areas of the passenger compartment
55. Daimler DBL 5404-§-§ 18.7; Scratch Resistance, Subsequent Color Measurement, Scratch resistanceParts made of thermoplastic for direct and indirect areas of the passenger compartment
56. Daimler DBL 5404-4.1 (according to DIN EN ISO 22088-3)-§ 4.1; Stress Cracking (according to DIN EN ISO 22088-3 Part 3: Twisted Strip Method), Tension cracking Parts made of thermoplastic for direct and indirect areas of the passenger compartment
57. Daimler DBL 5406; Supply Specification - Parts Made of Thermoplastics in the Coolant Circuit.G. Radiator Tank, Pump Housing-
58. Daimler DBL 5408; Thermoplastics for Use in Engine Air Management Thermoplastic Parts for Engine Air Management.
59. Daimler DBL 5410; Parts Thermostatic Synthetic Operating Controls, Bearing Fasteners, Spacers
60. Daimler DBL 5412; Supply-Specification – Plastic moldings made of plasticized PVCPlastic moldings made of plasticized PVC-
61. Daimler DBL 5413; Supply Specification, Plastic Profiles Made of Plasticized PVC and Abs-PVCe.G Profile Cords, Cover Strips, Fastening Sections-
62. Daimler DBL 5416; Parts Made of Thermoplastic Plastics Externally Applied Panels, Enclosures Functional Parts
63. Daimler DBL 5416 (REQUIREMENTS for plating); Supply Specification – Parts Made from Thermoplastics for Panels, Enclosures, and Functional Parts for Exterior Applications-
64. Daimler DBL 5416 (Material REQUIREMENTS); Supply Specification – Covering Parts from Thermoplastics, Housings and Functional Parts for Exterior Applications, Covering Parts from Thermoplastics, Housings and Functional Parts for External Applications-
65. Daimler DBL 5417; Supply Specification, Molded Parts Manufactured from Long Fiber Reinforced Thermoplastics, Hot Pressed for All Long Fiber Reinforced Thermoplastics Processed by Compression Molding and Impact Extrusion (Flow Molding). (Attention- This Dbl 5417 Is Not Applicable For The Same Materials Processed By Injection. Dbl 5418 Will Be Applied For These.)
66. Daimler DBL 5418; Supply Specification – Injection Molded Parts Made of Fiber-Reinforced Thermoplastics for Structural Requirements of Components Made of Fiber-Reinforced Thermoplastics with Enhanced Mechanical Strength and Rigidity Requirements to Fully Utilize Lightweight Design Potential.-
67. Daimler DBL 5420; Delivery Instructions Plastic insulating parts for the electrical low voltage range, e.g. Insulator for lamp base, coil
68. Daimler DBL 5430; Interior Emissions and Odors for Materials and Components That May Indirect or Direct Contact with Vehicle Interior Air.
69. Daimler DBL 5450; Supply Characteristics- Foamed Flexible Polyurethane Based Cellular Plastics Foamed Flexible Polyurethane Based Cellular Plastics-
70. Daimler DBL 5452; Foam Molded Flexible Cellular Polyurethane Based Materials
71. Daimler DBL 5454; Supply Specification Covered Foam Floor Top Layers-
72. Daimler DBL 5455; Supply Specification Polyolefin Foam
73. Daimler DBL 5456; Supply Specification – Composite foam blocks for interior applications Composite foam blocks made of PUR foam flakes in block molds with binder. For example, As Insulation A-Pillar, B-Pillar as additional or reinforcement damping material in seats for passenger cars, commercial vehicles and buses
74. Daimler DBL 5460; Supply Specification – Parts Made from Energy Absorbent Foams for Indoor Energy Absorbing Foams-
75. Daimler DBL 5462; Supply Specification – Molded Rigid and Semi-Rigid Foams for Molded Rigid and Semi-Rigid Foams. E.g. Midfield Side Airbag, Dashboard Foam Support-
76. Daimler DBL 5463; Lightweight multi-layer soundproofing for interior and exterior applications Lightweight multi-layered soundproofing for interior and exterior applications. Acoustic components for interior and exterior vehicle compartments
as.- 77. Daimler DBL 5468; Supply Specification-Polyurethane Integrated Structural Foam for Interior Parts polyurethane Integrated Structural Foam for Interior Parts-
78. Daimler DBL 5471; PR ESCription Supply, Piece Upholstery Trim Parts Per Vehicle (Combined Parts)
79. Daimler DBL 5471 2007-05-§ 4.1.1; Dry-Hot/Humid-Cold (Hot Climate Cycle Test A) + 4.3 Color Change, Supply specification – trim panels and molded cored parts (compound parts) for vehicle interiors
80. Daimler DBL 5471 2007-05-§ 4.1.2; Dry-Hot/Humid-Cold (Hot Climate Cycle Test B) + 4.3 Color Change, Product features – trim panels and molded cored parts (compound parts) for vehicle interiors
81. Daimler DBL 5471 2007-05-§ 4.1.3; Dry-Hot/Humid-Cold (Hot Climate Cycle Test) + 4.3 Color Change, Supply feature – trim panels and molded cored parts (compound parts) for vehicle interiors
82. Daimler DBL 5471 2007-05-§ 4.2.1 + 4.3; Dry-Hot Endurance Test A (Hot Temperature Test) + Color Change, Supply specification - trim panels and molded cored parts (compound parts) for vehicle interiors
83. Daimler DBL 5471 2007-05-§ 4.2.2 + 4.3; Dry-Hot Endurance Test B (Hot Temperature Test + Color Change, Supply specification – trim panels and molded cored parts (compound parts) for vehicle interior)
84. Daimler DBL 5471 2007-05-§ 4.2.3 + 4.3; Dry-Heat Endurance Test (Heat Test) + Color Change, Supply feature – trim panels and molded filled parts (compound parts) for vehicle interiors
85. Daimler DBL 5471 2007-05-§ -4.2.4; Moist-Hot Aging + 4.3 Color Change, Supply specification – trim panels and molded cored parts (compound parts) for vehicle interiors
86. Daimler DBL 5471 2007-05-§ -4.2.4 + 4.3; vehicle interiors (compound parts)
87. Daimler DBL 5471 2007-05-§ -4.4; Solar Simulation Daimler, Supply specification – trim panels and molded infill parts (compound parts) for vehicle interiors
88. Daimler DBL 5471(AA90-95)-§ 4.11-§ 4.11; Abrasion Resistance (DIN EN ISO 105-X12), Abrasion resistance (DIN EN ISO 105-X12)Supply specification – trim panels and molded cored parts (compound parts) for vehicle interiors
89. Daimler DBL 5472; Supply Specification, Sandwich Design Surface Material, Sandwich Design Substrate Material, EG Molded Headlining, Sliding Roof Lining, Cover Luggage Compartment Floor, Roof Reinforcement Insulation
90. Daimler DBL 5474; Supply Specification, Multilayer Composite Film for Indoor Equipment Sensor SystemsMultilayer Composite Film for Indoor Equipment Sensor Systems-
91. Daimler DBL 5481; Deep Drawing
Extruded Plastic Panels That Can Make 92. Daimler DBL 5485; Direct Laminate Coatings Vehicle Interiors (Rear Compression / In-Mould Decoration)
93. Daimler DBL 5490; Specification – Plastic Parts Manufactured from Recycled Materials for Plastic Components Consisting of Recycled Material Recovered from Largely Used Old Parts.-
94. Daimler DBL 5527; Galvanic Corrosion Prevention Supply Specification – Reduced Conductivity Elastomer Materials (To Prevent Contact Corrosion)-
95. Daimler DBL 5555; Parts Produced by PR Semi-Finished PR products Produced Organic Polymer Materials General Conditions Test Methods
96. Daimler DBL 5555 (Daimler DBL 5555); Finished Parts and Semi-Finished Products Made of Organic Polymer Materials General Conditions and Test Methods
97. Daimler DBL 5555/08; Deformation After Hot Storage
98. Daimler DBL 5555-II-6.2 (DIN EN ISO 4892)-§ 6.2; Artificial Weathering (according to DIN EN ISO 4892), Artificial weatheringSupply specification – Finished parts and semi-finished products made of organic polymer materials
99. Daimler DBL 5555-II-6.4; Steam Blast Test DC, Steam Blast Test –
100. Daimler DBL 5556; Molded Elastomer Parts Subject Normal Mechanical Requirements
101. Daimler DBL 5558; Elastomer Parts Mechanical-Dynamic High Very High Stress, Thermally Claimed Up to 100 °C
102. Daimler DBL 5559; Supply Specification, Manufactured Parts Thermoplastic Polyurethane Elastomers (Tpu) Temperature Application Range Up to 120 °Ce.G. Cups, Dust Caps, Sealing Elements
103. Daimler DBL 5562; Thermoplastic Elastomers (Tpe)Thermoplastic Elastomers
104. Daimler DBL 5565; Elastomer Parts Thermally 120 °C 150 °C Claimable, Resistant Grease Fuels
105. Daimler DBL 5568; Claimable Elastomer Parts Thermally 120 °C 150 °C, Medium Strength Mineral Oil PR products
106. Daimler DBL 5571; Sealing PR offices / Molded Elastomers, PR mainly Body Area Thermally 70 °C Continuous 100 °C Short Term Requestable
107. Daimler DBL 5572; Check Multi-Layer Floor Coverings
108. Daimler DBL 5573; MoldIN gs PR ofiles Made of Foam Rubber (Foam Elastomers Open-Closed-Cell Structure)
109. Daimler DBL 5574; Supply Specification, Moldings and Hoses Made of Cellular Rubber (Closed Cell Porous Elastomers) For Restricted Sealing Only Parts and/or Insulation Capability (Up to 85°C), Inner and Outer Body Space
110. Daimler DBL 5575; Elastomer Parts in Textilbeflock Body Gaskets Plastic Parts Inside the Car
111. Daimler DBL 5575-§ 10.1; Abrasion Resistance (Crockmeter) Supply Specification, Textile-Flocked Elastomer Parts for Body Gaskets and Plastic Parts for Vehicle Interior, § 10.1 Abrasion Resistance (Crockmeter) (for Aa 10 / 20 / 21)-
112. Daimler DBL 5575-§ 10.2; Abrasion Resistance (Crockmeter) Supply Specification, Textile-Flocked Elastomer Parts for Body Gaskets and Plastic Parts for Vehicle Interior, § 10.2 Abrasion Resistance (Crockmeter) (for Aa 22)-
113. Daimler DBL 5575-§ 6.5.1; Abrasion resistance (Crockmeter)Supply properties, Textile flocked elastomer parts for body sealants and plastic parts for vehicle interior, § 6.5.1 Wear resistance (Crockmeter)-
114. Daimler DBL 5578; GleitlackbESChichtete Elastomer Parts
115. Daimler DBL 5578, Appendix AK 2.1-§ 22; Steam Spray Test Supply Specification – Elastomer Parts with Anti-Friction Coating, Appendix Ak 2.1 § 22- Steam Spray Test
116. Daimler DBL 5578, Tab. 2, 4.11 (crockmeter)-Abrasion Test, crockmeterSupply Specification, elastomer parts with anti-friction coating; Tab. 2, 4.11: Abrasion Test, Crockmeter
117. Daimler DBL 5578, Tab. 2, 4.11 (profile edge)-Abrasion Test on profile edgeSupply Specification, elastomer parts with anti-friction coating; Tab. 2, 4.11: Profile Edge
Abrasion Test on 118. Daimler DBL 5578, Tab. 2, 4.12.4 / LV 28 (Florida-Modus); Weather resistance (humidity-hot climate, eg Florida) Supply specification – Elastomer parts with anti-friction coating Table 2, 4.12.4: Artificial Weathering – Outdoor Application – Florida-Modus
119. Daimler DBL 5578, Tab. 2, 4.12.4 / LV 28 (Kalahari-Modus); Weather resistance, dry-hot climate, eg Kalahari, Arizona, South AmericaSupply specification – Elastomer parts with anti-friction coating Table 2, 4.12.4: Artificial Weathering – Outdoor Application – Kalahari-Modus
120. Daimler DBL 5610; Supply Specification – Security Windows for Vehicle WindowsProduct Versions 00 to 23- Windshields (Ws) / Product Versions 30
to 97 121. Daimler DBL 5620; Organic Glass Lighting Arrangements
122. Daimler DBL 5765; Supply Specification – Wood Fiber Boards for Reinforcements for Interior Flooring Parts, EG Reinforced Door Center Panel, Load Compartment Cover, Reinforcement Sliding Roof.-
123. Daimler DBL 5768; Supply Specification ComPR ession, Molded Fibrous Materials
124. Daimler DBL 5800; Supply Specification – Folding Top Fabric Folding Top for Convertible and Sports Cars
125. Daimler DBL 5805; Supply Specification, Reverse Side Lamination Material Reverse Side Leather Lamination Material-
126. Daimler DBL 5809; Supply Specification Knitted Fabric Knitted Fabric-
127. Daimler DBL 5816; Supply Specification – Microfiber Nonwovens for Microfiber Nonwovens -
128. Daimler DBL 5818; Knitting
129. Daimler DBL 5853; Supply Specification – Velvet Carpet Shaped Carpet-
130. Daimler DBL 5867; Supply Specification – Technical FabricsTechnical Fabric – Polyamide
131. Daimler DBL 5868; Supply Specification – Needle Fabrics
132. Daimler DBL 5868 A; Supply Specification – Needlefelt Fabricsflat Needle Fleece-
133. Daimler DBL 5869; Supply Specification Nonwoven Fleece
134. Daimler DBL 5881; Delivery Instructions Synthetic Fiber Polyester Fabric Upholstered Fabric Sofa Center Section-
135. Daimler DBL 5882; Supply Specification – WovEN Upholstery Fabric Upholstery Fabric-
136. Daimler DBL 5883; Supply Specification – Synthetic Upholstery Fabric for Synthetic Upholstery Fabrics For example, Door Covers, Door Center Panels, Seat Covers, Seat
Headers.- 137. Daimler DBL 5884; Supply Specification – Support Material Seat Cover Br W212-
138. Daimler DBL 5913; Supply Specification - Straps & BeltsStraps & Belts-
139. Daimler DBL 5934; Supply Specification – Rubber Bands, Cords and Fabric Rubber Bands-
140. Daimler DBL 5937 ; Supply Specification - Tubular Tricot Tape Tape on Lids -
141. Daimler DBL 5939; Suppla Specification Tapese.G. Headrest Housing Fastening-
142. Daimler DBL 5943; Supply Specification – Fully Synthetic Twisted Thread Sewing Thread -
143. Daimler DBL 5955; Supply Specification Filler Upholstery Wadding-
144. Daimler DBL 5972; Single Layer Acoustic Insulation Materials Insulation materials, plastic films-
145. Daimler DBL 6260; Power Steering and Suspension Systems High Pressure (Hd), Return and Suction Hose for Power Steering, Supply Specification, Hose and Lines for Automatic Level Control and Suspension Systems-
146. Daimler DBL 6269; Supply Specification Hoses for Windshield Washer Systems and Headlight Washer / Wiper Systems Hoses for Windshield Washer Systems and Headlight Washer / Wiper Systems
147. Daimler DBL 6270.17; Polyamide Pipes for Low Pressure Applications
148. Daimler DBL 6515; Determination of Technical Cleanliness of Components
149. Daimler DBL 6714; Dangerous Goods Regulation
150. Daimler DBL 7340; Supply Specification Paints Containing Zinc Powder
151. Daimler DBL 7381; Coating Major Passenger Car Components/ Body Panels Other Functional Parts High Abrasive Stress
152. Daimler DBL 7382; Supply Specification – Coating of Metallic Parts in Vehicle Interiors, for All Metallic Base Materials with Organic Coatings in Vehicle Interiors. Testing the Surface Protection Properties of the Coating in terms of Corrosion, Mechanical Properties and Weather Resistance.-
153. Daimler DBL 7382-§ 9.13; Evaluation of Corrosion Degree, Surface Corrosion Supply Specification – Coating of Metallic Parts in Vehicle Interiors- § 9.13
154. Daimler DBL 7382-§ 9.14; Evaluation of Corrosion Degree, Edge Corrosion Supply Specification – Coating of Metallic Parts in Vehicle Interiors- § 9.14
155. Daimler DBL 7382-§ 9.16; Sub-Surface Corrosion Around a Scribe Supply Specification – Coating of Metallic Parts in Vehicle Interiors- § 9.16
156. Daimler DBL 7382-§ 9.7; Knife Scratch Test - Knife Scratch TestSupply feature - Coating of metallic parts in vehicle interiors
157. Daimler DBL 7384; Selected Parts Delivery Regulation Mercedes-Benz Dbl 7384 Liefervorschrift – BESChichtung Von KunststoffteilEN Im Fahrzeuginnenraum June
158. Daimler DBL 7384-§ 4.10; Touch Behavior / Touch Test Touch Behavior / Touch Test
159. Daimler DBL 7391; Coating / Painting Parts High Corrosive Stress
160. Daimler DBL 7391 (Daimler DBL 7391); Coatings / Paints for High Corrosion Parts / Coatings / Paints for Significant Corrosion Parts
161. Daimler DBL 7392; Coating/Painting Parts Subject Moderate Exposure Corrosion Stress
162. Daimler DBL 7392-§ 5.5; Rust Degree Evaluation, Surface Corrosion, Corrosion Degree Evaluation, Surface corrosionSupply specification – Coating/varnishing for parts with moderate corrosion stress
163. Daimler DBL 7392-§ 5.2; Blade Scrape, Knife ScrapeSupply specification – Coating/varnishing for parts with moderate corrosion stress
164. Daimler DBL 7392-§ 5.4; Corrosion Creep Around a Nail, Sub-Surface corrosion around a scriber Supply specification – Coating/varnishing for parts with moderate corrosion stress
165. Daimler DBL 7392-§ 5.7; Rust Degree Evaluation, Edge Corrosion, Rust degree evaluation, edge corrosionSupply specification - Coating/varnishing for parts with moderate corrosion stress
166. Daimler DBL 7398; Heat Resistant Paint
167. Daimler DBL 7399; General Conditions Test Enamels, Paints Similar Coating Materials Related Coatings
168. Daimler DBL 7399 (Daimler DBL 7399); Varnishes and Paints / Varnishes and Paints
169. Daimler DBL 7399-§ 5.1; Blade Scrape, Knife ScrapeSupply specification – Enamels, paints and similar coating materials and related coatings
170. Daimler DBL 7399-§ 6.1; Visual Comparison of Gloss vs. Standard Samples, Visual Comparison of Gloss vs. Standard Samples Supply specification – Enamels, paints and similar coating materials and related coatings
171. Daimler DBL 7402; Decorative Coating of Plastic Parts by Plasma or Vacuum Deposition Made of Plastic and Equipped with Decorative Coating, Produced by Plasma or Vacuum Deposition Method
172. Daimler DBL 7904; Pasted Links in Components
173. Daimler DBL 7906; Supply Specification – Self Adhesive Componentse.G. Gps-Antenna, Emblems, Spoiler-
174. Daimler DBL 8230: Delivery Specification – Self-Adhesive Labels Daimler – Benz, Labels 1982
175. Daimler DBL 8451; Electroplated Zinc or Zinc Alloy Plating Components Made from Ferrous Materials
176. Daimler DBL 8465; Electrolysis Parts Produced from Metallic Coated Plastics.G. Functional Parts or Ornamental Parts, Hubcaps
177. Daimler DBL 8585; Environmental Public Relations, Dangerous Goods, Dangerous Goods Negative Substance List
178. Daimler DBL 9201; Anodized Surface Aluminum Parts Decorative Interior and Exterior Parts of Motor Vehicles
179. Daimler DBL 9202; Delivery Specification – Decorative Parts in Vehicle Interior Decorative Parts in Vehicle-
180. Daimler DBL 9202 2013-01; Supply Features Decorative Parts in Vehicle Interiors – § 9.3 Hot Storage 1 – Wl 1 – § 9.4 Hot Storage 2 – Wl 2 – § 9.5 Hot Storage 3 – Wl 3 –
181. Daimler DBL 9202 2013-01-§ 9.1; Thermal Cycling 1 – Twt 1, Delivery Specification Interior Decorative Parts
182. Daimler DBL 9202 2013-01-§ 9.2; Thermal Cycling 1 – Twt 2, In-Vehicle Supply Specification Decorative Parts
183. Daimler DBL 9202 2013-01-§ 9.6; Climate Protection 2 – Kl, Supply Specification Decorative Parts in Vehicle Interiors
184. Daimler DBL 9202 2013-01-§ 9.7; Variable Climate Test, Kwt Aklv Steering – Supply Specification Interior Decorative Parts
185. Daimler DBL 9202 2013-01-§ 9.8; Accelerated Testing - Supply Specification Vehicle Interior Decorative Parts
186. Daimler DBL 9202-§ 3.5-§ 3.5; Adhesion Test (Adhesive Tape Method), Adhesion Test (adhesive tape method) Supply Specification – Decorative parts in vehicle interiors
187. Daimler DBL 9202-§ 4.1.1-§ 4.1.1; High-Temperature Storage, High-temperature storageSupply Specification - Decorative parts in vehicle interiors
188. Daimler DBL 9202-§ 4.1.2-§ 4.1.2; Temperature Cycle, Temperature CycleSupply Specification – Decorative parts in vehicle interiors
189. Daimler DBL 9202-§ 4.1.3-§ 4.1.3; Climatic Storage, Climatic storageSupply Specification – Decorative parts in vehicle interiors
190. Daimler DBL 9202-§ 4.1.9-§ 4.1.9; Resistance Tests (Resistance to Cleaning/Maintenance Products), Resistance Test Supply Specification – Decorative parts in vehicle interiors
191. Daimler DBL 9202-§ 7.14; Maintenance product durability, maintenance product durability Supply Specification – Decorative parts in vehicle interiors
192. Daimler DBL 9202-§ 7.15; Resistance to Cosmetics, Resistance to CosmeticsSupply Specification - Decorative parts in vehicle interiors
193. Daimler DBL 9202-§ 7.19; Component Stress Cracking Resistance, Component Stress Cracking Resistance
resistorSupply Specification – Decorative parts in vehicle interiors 194. Daimler DBL 9440; Metric Threaded Fasteners – Surface Protection and Supplement Tl / VDA 235-104- Cr(Vi)-Free Protection Surface for Metric Threaded Fasteners.EG Metric Threaded Fasteners (Internal and External)
195. Daimler DBL 9441; Supply Specification – Surface Protection for Fasteners and Plastic (Non-Metric) for Direct Screw Connection in Metal Sheets
Threads ) Fasteners and Plastic (Non-Metric Threads) for Direct Screw Connection in EG Metal Plates - 196. Daimler DBL5338; Trikotkunstleder
197. Daimler DBL5399; Instruction De Livraison – Nettoyage Des Materiaux Ou Pieces Interieures
198. Daimler DBL7384; Vehicle
Coating of Plastic Parts Inside 199. Daimler FuVo A 001 001 90 99; Coating Strip Under the Effect of Temperature-
Pedestrian Drop Inspection Footstep inspection 200. Daimler FuVo A 001 006 00 99; Function Specification Dashboard
Mounting Instrument Panel Mounting 201. Daimler FuVo A 170 680 01 00; Function Specification Dashboard
Mounting Instrument Panel Mounting 202. Daimler FuVo A 210 720 00 00; Function Specification Door Panel Assembly Door Panel Assembly
203. Daimler FuVo_A_0010060099_DE_20 10_02_ZGS001; Function Specification Instrument Panel Mounting Solar Simulation DIN 75220 (Sosi) – Indoor Solar Simulation – § 3.1.2 Solar Simulation DIN 75220 (Sosi) – Outdoor Solar Simulation
204. Daimler MBN 10494-5-§ 5.1; Manual Scratch Test (By Knife)Paint Test Methods – Part 5- Technical-Mechanical Test s
205. Daimler MBN 10494-5-§ 5.8.2; Erasing Scratching
Resistance - Crockmeter Test Scratch Resistance of Coatings with the Crockmeter 206. Daimler MBN 10505; Non-Metallic Materials – A Moist
Weathering in Climate 207. Daimler MBN 10506; Non-Metallic Materials – Weathering in Dry and Hot Climates
208. Daimler MBN 10526; Test Method for Self-Adhesive Components
209. Daimler MS-JP-9-4(S); Flammability When Delivered. Flammability of Interior Materials
Capability Test - 210. Daimler PAPP PWT 3640; Tensile Shear Strength Determination of Tensile Shear Strength of One Piece Overlap Adhesive (Tension Shear Test According to DIN EN 1465)-
211. Daimler PAPP PWT 3668; Static Shear Force of Joined Components Static Shear Force
Determination- 212. Daimler PAPP PWT 7301; Abrasion Test with Steel Heel Abrasion Test with Steel Heel -
213. Daimler PAPP PWT 7328; Sun
Conditioner Resistance Indoor Materials Sunscreen Resistance - 214. Daimler PAPP PWT 7329; Color Change in Specified Amine Atmosphere Color Change of Automotive Interior Material in Specified Amine Atmosphere-
215. Daimler PAPP PWT32643; peeltest
216. Daimler PAPP PWT7328; Solar Interior Materials
Cream Resistance 217. Daimler PB VWL 301; Abrasion Test with Metal Heels Abrasion Test with Metal Heel -
218. Daimler PB VWL 323;
Determining the Wear Resistance of the Pile Determining the Wear Resistance of the Pile – Test Instruction-219. Daimler PB VWT 217; Corrosion Test Corrosion Vehicle Interior
Triminin Test – Test Instruction- 220. Daimler PBODC361; Kratz test
221. Daimler PBODC390; Scratch Resistance of Coatings with Crockmeter Determination of Scratch Resistance of Coatings with Crockmeter
222. Daimler PBVWL709; Analysis of Emission of Volatile and Condensable Substances from Vehicle Interior Materials by Thermodesorption
223. Daimler PF4992; Plastic Parts (Gardner) Impact Resistance (Only
Transport ) 224. Daimler PF9688; Electrical/Electronic (E/E) Device Environmental and Endurance Test Specifications
225. Daimler PV EP/AIS (Abrasion Test); Entry/Exit Endurance Test Standard Seats – Endurance Tests – Heated Seats – § 5.17.1 and § 5.17.2- Abrasion Test, Side and Center Arm Rest
226. Daimler PV EP/AIS (Pulsator Test); Entry/Exit Endurance Test Standard Seats – Endurance Test s – Heated Seats – § 5.17.3 and § 5.17.4- Vibration Test, Center Seat and Exit Side Seat Cushion
227. Daimler PV EP/AIS (Rotary Load Exchange); Entry/Exit Endurance Test Standard Seats – Endurance Test s – Heated Seats – § 5.17.5- Rotating Load Change
228. Daimler PV EP/AIS (TV1 with taxi load)-§ 5.7.12A; Entry/Exit Simulation with Robots (Taxi Loaded Tv1), Entry/Exit durability Test Standard seats – Endurance Test s – Complete seat
229. Daimler PV EP/AIS-§ 5.7.12a (TV2 without taxi load)-§ 5.7. 12B; Entry/Exit Simulation with Robots (Tv2 without Taxi Load), Entry/Exit endurance Test Standard seats – Endurance Test s – Complete seat
230. Daimler PV EP/AIS-§ 7.4.1; Solar Simulation, Solar simulation (long-term Test ) Test Standard seats – environmental condition
231. Daimler QEV 111AFFHJ6; Technical Component Requirements Specifications – Rear Rack
Coveringsb Rear Shelf Coverings- 232. Daimler SN198525; Pilling Resistance Test
233. Daimler TP-302-03; Flammability of Interior Materials