Renault 36-04-529-E Rear Lamps (Full LED and Bulb/LED) and Rear Combination Lamp (Fog, Reverse, Reflex)

The standard “Renault 36-04-529-E Rear lamps (full LED and bulb/LED) and rear combination lamp (fog, reverse, reflex)” developed by the French automobile company Renault describes the characteristics and requirements of the signal lamps of a project. The technical description of the rear lamps is specified in a separate file.

The functions covered by this standard are: Rear lamp, signal lamps, stop lamps S1, S2, S3, reversing lamps, rear fog lamps, reflector, license plate lamp and all special signal lamps (side marker, parking, clearance, etc.).

The parts covered by this standard are as follows: All components of the signal lamp, including light sources and electronic systems.

Different functions should be studied together to benefit from all possible synergies and optimizations. It should be compatible with the technologies installed in different countries of vehicle production. If the company does not have a local installation close to one of the Renault installation sites, it is necessary to provide the most detailed description possible relationships or installation projects and alternative solutions. In particular, the hypotheses considered and their projection over time should be stated (technical scope, investments, commercial strategy in the region, logistics study, environmental constraints considered, risk assessment, etc.).

The functions that must be provided in this standard are listed as follows:

• FP 01: Should indicate vehicle location, should indicate change in vehicle status, should indicate the purpose of an operation
• Must comply with FC 01 Reliability and durability constraints
• Must comply with FC 02 Diversity requirements
• Must comply with FC 03 Conditioning requirements
• Must comply with FC 04 Weight requirements
• FC 05 Must match target price
• Must comply with FC 06 Design constraints
• FC 07 Must comply with perceived quality requirements
• FC 08 must comply with the material approved by Renault Engineering Center
• FC 09 Must comply with the restriction on the use of anti-coating of crystalline lenses
• FC 10 Must comply with different verification schemes
• FC 11 Must comply with calculation restrictions
• Must comply with FC 12 Certification conditions
• FC 13 Must comply with the conditions regarding the changes
• FC 14 Must comply with restrictions on standardization of drawings
• FC 15 must use bulbs approved by Renault
• FC 16 Must comply with restrictions on the volume of parts to be produced
• FC 17 Must comply with planning restrictions
• FC 18 Must comply with restrictions on marking parts
• Must comply with FC 19 Traceability restrictions
• FC 20 Must comply with appearance requirements
• FC 21 Must comply with restrictions related to the monitoring plan
• Must comply with FC 22 Quality department requirements
• FC 23 Must comply with restrictions on transport and handling
• FC 24 Must comply with storage restrictions
• FC 25 Must comply with on-site intake restrictions
• FC 26 Must meet restrictions for interior finishes
• FC 27 Must resist external attacks
• FC 28 Must comply with ergonomic requirements
• Must comply with FC 29 Regulation
• Must be compatible with FC 30 Vehicle architecture
• Must comply with FC 31 Electrical architecture restrictions
• FC 33 Technical must resist and adapt to the environment
• FC 34 Must resist the teams
• FC 35 The violator must resist the action
• FC 36 Must withstand installation and removal forces
• Must comply with FC 37 External projection regulation
• FC 38 Must enable user to remove and re-insert bulbs
• FC 40 Must be compatible with other users
• FC 41 Must be Sealed
• FC 44 Must be compatible with electrical and electronic environment
• Must comply with FC 45 Component change requirements

Among the numerous tests, measurements, analyses and evaluation studies that our organization has carried out for businesses in various sectors, our organization also provides testing services defined in the “Renault 36-04-529-E Rear lamps (full LED and bulb/LED) and rear combination lamp (fog, reverse gear, reflex)” standard with its trained and expert staff and advanced technological equipment.