SAE Compliance Tests

EUROLAB With its expert team and state-of-the-art laboratories, it offers reliable and unbiased results in automotive tests, as in all other tests.

SAE Compliance Test List

• SAE/USCAR-15 Rev 3; Specification for Testing Automotive Bulb Sockets (except 6.6)
• SAE/USCAR-2 Rev 5; Performance Specification for Automotive Electrical Connection Systems
• SAE Engineering Assistance 25; Small Adult Female Hybrid III Test Manikin User Manual
• SAE Engineering Assistance 26; Hybrid III Large Male Instruction Manual
• SAE J365; Method of Testing the Resistance of Trim Material to Friction
• SAE J 913; Resistance to Fluorescein
• SAE J1113-21; Electromagnetic Compatibility Measurement Procedure for Vehicle Components Part 21: Immunity to Electromagnetic Fields,30 MHz to 18 GHz, Absorber Striped Chamber
• SAE J1113-22; Electromagnetic Compatibility Measurement Procedure for Vehicle Components Part 22 – Immunity to Emitted Magnetic Fields
• SAE J1113-23; Electromagnetic Compatibility Measurement Procedure for Vehicle Components – Immunity to Radiated Electromagnetic Fields, 10 kHz - 200 MHz, Strip Line Method
• SAE J1113-25; Electromagnetic Compatibility Measurement Procedure for Vehicle Components – Immunity to Radiated Electromagnetic Fields, 10 kHz - 1000 MHz, Three-Plate Line Method
• SAE J1128; Wire Test
• SAE J1153; Hydraulic Master Cylinders Test Procedure for Motor Vehicle Brakes
• SAE J1194; Roll Over Protection Structures (ROPS) for wheeled agricultural tractors
• SAE J1351; Hot Smell Test for Insulation Materials
• SAE J1355; Test Method for Measuring the Thickness of Flexible Insulation Fills
• SAE J1389; Insulation Materials Corrosion Test
• SAE J1530 Para. 3; Wearing with Taber Abrasive Method
• SAE J1530; Carpet, Taber's Resistance to Abrasion, Pitting and Fiber Loss
• SAE J1545 (CIED65); Gloss Measurement
• SAE J1545; Delta-E Value (Color Measurement)
• SAE J1639; Test Methods for Nylon Materials
• SAE J17; Latex Foam Rubbers
• SAE J1756 (Fogging F); Determining Fogging Characteristics (Fogging F)
• SAE J1756 (Fogging G); Determining Fogging Characteristics (Fogging G)
• SAE J1756; Test procedure to determine fogging properties of interior automotive materials
• SAE J1756; Test procedure to determine fogging properties of interior automotive materials
• SAE J1756; Test Method for Determining Fogging Properties of Interior Automotive Materials
• SAE J1756-A; fogging
• SAE J1756-B; fogging
• SAE J1767; Instrumental Color Difference Measurements for Color Fastness of Automotive Interior Upholstery Materials
• SAE J1769; SAE Information Report-Protocol for Evaluation of Long-Term Permeability-Barrier Strength in Non-Metallic Fuel Tanks
• SAE J1847; Taber Wear
• SAE J1885 (Inactive 2008)2; Accelerated Exposure of Automotive Interior Trim Components Using Controlled Radiation Water Cooling
• SAE J1885; Light Fastness (Internal)
• SAE J1960 (Inactive 2008)2; Xenon Arc Time-Lapse Exposure (External)
• SAE J1960; Light Fastness (Outside)
• SAE J2044; Quick Connect Specification for Liquid Fuel and Vapor/Emission Systems
• SAE J2292; Combined Pelvic/Upper Body (Type 2) Operator Protection Systems for Off-Road Construction Equipment
• SAE J2334; Laboratory Cyclic Corrosion Test
• SAE J2412; speed of light
• SAE J2464; Shock (Mid-1 and Mid-2 only), Drop, Penetration, Rollover, Immersion, Crush, High Temperature Hazard, Thermal Stability, Cycling Without Thermal Management, Thermal Shock Cycling
• SAE J2527; Performance-Based Standard for Accelerated Exposure of Automotive Exterior Materials Using a Controlled Radiation Xenon-Arc Apparatus
• SAE J2856; 50th Percent Male Hybrid III Puppet User's Guide
• SAE J2860; Hybrid III Large Male Test Manikin User Manual
• SAE J30; Fuel and Oil Hoses
• SAE J315; Mullen Burst Test
• SAE J323 (Method A); Cold Flexibility Mandrel Test
• SAE J323; Cold Breaking of Flexible Plastic Materials
• SAE J323-A; Cold Cracking (Mandrel Test)
• SAE J365; Friction Resistance, Taber
• SAE J369; flammability
• SAE J386; Operator Safety System for Off-Road Construction Equipment
• SAE J400; Chip Resistance of Surface Coatings
• SAE J575; Lighting Devices and Components for Use in Vehicles Smaller than 2032 mm
• SAE J578; Color Specification
• SAE J684; Trailer Couplings, Hangers and Safety Chains Automotive Type
• SAE J826; Devices for Use in Identifying and Measuring Vehicle Seating Layout
• SAE J855; Static and Permanent Extension Stretch and Set Textile, Leather
• SAE J860; Determination of Mass Per Unit Area
• SAE J861; Resistance to Cracking
• SAE J882; Thickness of Textile Materials
• SAE J883; dimensional stability
• SAE J903; Passenger Car Window Wiper Systems
• SAE J912; Blocking Resistance
• SAE J912A; Color Keyed Overlay Blocking
• SAE J913; wicking
• SAE J948 (Taber only); Taber Wear
• SAE J948 Para. 3; Wear Resistance by Wear Wheel Method
• SAE J948; Abrasion Resistance
• SAE J949; Hardness (Bending Modulus)
• SAE JI545; Instrumental Color Difference Measurement for Exterior Coatings, Textiles and Colored Upholstery
• SAE/USCAR-14; Testing specification for automotive halogen light sources according to DIN EN 60825-1, laser protection class 4 (440 nm - 460 nm) VDE 0837-1 is available
• SAE/USCAR-3; Specification for testing automotive miniature bulbs
• SAE2045 7.8 Self-oxidizing Fuel Resistance;4.5 Internal Fuel Resistance; Performance requirements for fuel system piping assemblies
• SAE-AMS 2631D; Ultrasonic Inspection-Titanium and Titanium Alloy Bar and Billet
• SAE-AMS 2644F; Inspection material-Penetrant
• SAE-AMS-2630C; Control, Ultrasonic, 0,5 Inch (12,7 mm) Thick Product
• SAE-AMS-STD-2154A; Inspection, Ultrasonic, Wrought Metals, Process.