Ford FLTM (Ford Laboratory Test Method) Tests

Automakers have merged in the past, so there are many cases where these features are widely used by every automaker. In addition, LV 112 and LV 214 standards for electrical connectors are being developed with the joint participation of automobile manufacturers such as Audi, BMW, Daimler, Porsche and Volkswagen. 

Therefore, Daimler, Benz, Chrysler, Volkswagen, Renault, Nissan etc. Please check the standard number regardless of the name of the finished vehicle manufacturer, such as Among these features, the name of the finished vehicle does not matter.

Ford FLTM (Ford Laboratory Test Method) Test Standards

1. Ford 00.00-E-802-USA; Ozone Resistance Test
2. Ford 00.00-L-467; Global Laboratory Accelerated Cyclic Corrosion Testing
3. Ford 00.00-R-311; Total Vehicle Accelerated Corrosion Test
4. Ford AN 101-01; Bleeding of Textiles – Sweating and Water
Stain Resistance 5. Ford AN 102-01; Hydrogen Sulfide of Plastic Materials
Stain Resistance 6. Ford AQ 150-01; Phosphate Contamination Test of High Strength Screws
7. Ford AZ 105-01; Trimetric Determination of Peroxide Number of Oxidized Gasoline Test Fuels
8. Ford AZ 105-02; Testing of Fuel Formulations
9. Ford BI 103-01; Salt Spray Resistance Test for Painted Panels and Parts
10. Ford BI 104-01; Water Immersion Test
11. Ford BI 104-02; Condensate Vapor Test
12. Ford BI 105-01; Conical Mandrel Test
13. Ford BI 106-01; Coating Adhesion Test
14. Ford BI 106-03; Hydrolysis Resistance of Painted Plastic Panels
15. Ford BI 107-01; Chip Resistance Test for Painted Panels
16. Ford BI 107-05; Thermal Shock Test for Coating Adhesion
17. Ford BI 108-01; Impact Test for Painted Panels
18. Ford BI 109-01; Color Matching with Artificial Light
19. Ford BI 109-03; Color Difference Evaluation of Textile Materials
20. Ford BI 110-01; Measuring the Brightness of Paint Panels
21. Ford BI 112-01; Sward Hardness Test
22. Ford BI 112-02; Tukon Paint Flocks
23. Ford BI 113-01; Water and Soap Staining Test for Paint 
24. Ford BI 113-02; Acid Staining Resistance 
25. Ford BI 113-03; Synthetic
Resistance to Sweat Staining 
26. Ford BI 113-05; Acid on Painted Test Panels or Real Finished Parts
Stain Resistance 
27. Ford BI 113-06; Sweat Resistance Test Method 
28. Ford BI 113-07; Synthetic Sweat Staining Resistance 
29. Ford BI 113-08; Sunscreen Lotion and Insect Repellent Resistance
30. Ford BI 117-01; Thickness Measurement of Paint Films
31. Ford BI 118-01; Preparation of Primed Parts for Laboratory Testing
32. Ford BI 123-01; PPGI Corrosion Test
33. Ford BI 123-03; Component Corrosion Test
34. Ford BI 151-01; Pencil Hardness of Paint Films
35. Ford BI 152-01; Resistance of Paint Films to Solvents
36. Ford BI 157-04; High Performance Stone Chips Resistance Test
37. Ford BI 157-05; Chip Resistance Test for Painted Panels
38. Ford BI 157-06; High Performance Stone Chip Resistance Test New Rating Scale
39. Ford BI 161-01; Determination of Mar Resistance in Automotive Paints
40. Ford BI 164-01; Malicious Waxing Methods
Harmful Effects Test 41. Ford BI 168-01; Incidental Exposure
Fluid Resistance of Chassis and Exterior Materials at Stay 42. Ford BJ 126-01; Oil Paint Test
43. Ford BN 012-03; Mold Resistance of Vinyls (“Pink” Painting)
44. Ford BN 024-02; Flammability Test for Automotive Interior Materials
45. Ford BN 102-01; Polymeric Materials – Low Temperature Flexibility
46. ​​Ford BN 103-01; Resistance of Coated Fabrics and Plastic Film to Migration Staining and Blockages
47. Ford BN 105-01; Shrinkage Test for Textile and Artificial Leather
48. Ford BN 105-03; Dimensional Stability of Textile Trim Materials
49. Ford BN 106-01; Determination of Unit Area Weight and Density of Flooring Materials
50. Ford BN 107-01; Cracking Test
51. Ford BN 107-02; Rubbing
52. Ford BN 108-02; Abrasion Resistance-Taber Abrasive
53. Ford BN 108-03; Pilling Resistance
54. Ford BN 108-04; Friction Resistance
55. Ford BN 108-07; Resistance to Installing Trim Materials
56. Ford BN 108-08; Determination of Excess Flock or Powder
57. Ford BN 108-09; Pile and Icing Test for Automotive Carpets
58. Ford BN 108-10;
Crockmeter Friction Test 
59. Ford BN 108-13;
Scratch Resistance 
60. Ford BN 108-14; Resistance of Leather Against Pilling Abrasion
61. Ford BN 112-08; Contamination and Cleanability Test for Interior Upholstery Materials
62. Ford BN 112-12; Stain Resistance of Seating Fabrics
63. Ford BN 113-01; Bond Strength of Trim Groups
64. Ford BN 117-03; Evaluation of Trim Materials After Accelerated Exposure in a Controlled Radiation Water-Cooled Xenon Arc Apparatus
65. Ford BN 119-01; Determination of Stitch Strength of Textile Trim Materials
66. Ford BN 121-01; Bond Strength Test -Interior Floor Decorations
67. Ford BN 128-01; Cold of Vinyl Coated Fabrics
Cracking Resistance 68. Ford BN 151-01; Bond Strength of Trim Groups
69. Ford BN 151-05; Determination of 180 Degree Peel Adhesion Strength of Laminates
70. Ford BN 155-01; Simulated Fingertip
Resistance to Abrasion 
71. Ford BN 156-01; Electrical Resistance Test for Textiles
72. Ford BN 158-01; Martindale Abrasion Test of Textile Fabrics
73. Ford BN 159-01; Identifying Broken Fabric Fibers at a Seam
74. Ford BN 51-5; skin cleansing
75. Ford BN 8-1; Abrasion Resistance of Textile Fabrics – Inflated Diaphragm Method
76. Ford BO 040-01; Short and Long Term Environmental Tests
77. Ford BO 101-01; Resistance to Artificial Weather Conditions
78. Ford BO 101-05; Determination of Fuel Resistance of Plastic Parts
79. Ford BO 101-1; Artificial Weather Resistance
80. Ford BO 111-02; Identification and Recovery
81. Ford BO 113-03; Load Deflection Test
82. Ford BO 115-01; Plastics – Artificial
Weathering Resistance 83. Ford BO 115-02; Artificial Plastics
Weathering Resistance 84. Ford BO 116-01; Resistance to Indoor Weather Conditions
85. Ford BO 116-03; fogging
86. Ford BO 127-03; Tension Break Test for Plastics
87. Ford BO 130-01; Resistance of Polymers and Adhesives to Engine Coolants
88. Ford BO 131-01; From Interior Flooring Materials / Components / Assemblies
Determination and Evaluation of Incoming Odor 
89. Ford BO 131-03; Indoor Odor Test
90. Ford BO 150-02; UV Xeno Test 1200
91. Ford BO 151-01; Low Temperature
Impact Resistance 
92. Ford BO 152-02; Painting Test for Adhesive on Flooring Material
93. Ford BO 158-03; Determination of Chemical Stress Crack Resistance of Plastic Parts Under Mechanical Stress
94. Ford BO 160-04; High Pressure Cleaning
95. Ford BO 162-01; Scratch Resistance and Marr
96. Ford BP 101-01; Ozone
Rubber Decay By 97. Ford BP 153-01; Painting of Surfaces with Polymers and Elastomers
98. Ford BQ 007-02; Acid Dissolution Test for Decorative Aluminum Parts
99. Ford BQ 103-06; Micro-
Measurement of Crack Density or Pore Density of Microporous Electrodeposite Chromium 100. 
100. Ford BQ 104-02; Moisture Resistance Test
101. Ford BQ 104-07; Environmental Test Cycles
102. Ford BQ 105-01; Cass-Test
103. Ford BS 152-01; Weather
Combustion Test for Intake System Filter Media 
104. Ford BU 101-06; Static and Dynamic Shear Tests of Pressure Sensitive Tapes
105. Ford BU 104-01; Adhesive and Sealant
Viscosity of Substances 
106. Ford BU 105-01; Painting Test for Adhesives and Pressure-Sensitive Tapes
107. Ford BU 151-01; Determination of Trim Adhesive Strength
108. Ford BU 152-02; Painting Test for Adhesives in Flooring Materials
109. Ford BV 101-07; Tensile Strength Test for Adhesive Lap-Shear Bonds
110. Ford BZ 156-01; From Non-Metallic Component Parts and Materials in Vehicle Interiors
Determination of Formaldehyde Emissions 
111. Ford BZ 157-01; Determination of Emissions from Non-Metallic Materials in Vehicles by Headspace Gas Chromatography
112. Ford CETP 00.00-L-467; Corrosion Testing global Laboratory Accelerated Cyclic Corrosion Testing –
113. Ford DVM 0006 EX; Outdoor Lighting DVM: Sunload Warpage
114. Ford DVM 0006-EX; Outdoor Lighting Dvm Sunload Warpage
115. Ford DVM 0007-MA-D; Coating adhesion, Method D (Scribe Test) Coating adhesion Test Method D: Scribe Test
116. Ford DVM 0012-17 (Version 4); Maximum Deviation and Rotation Maximum Deflection and Rotation for Interior Floor Quality Feel-
117. Ford DVM 0017-MA; Contamination and Cleaning Behaviors Contamination and Cleaning Behaviors of Indoor Materials-
118. Ford DVM 0019-MA; Scratch Resistance -
119. Ford DVM 0024 MA; Solar Load
120. Ford DVM 0024-MA; Solar Load
121. Ford DVM 0033-SH; Cold Temperature Set Test Cold Temperature Set Test (Mat Samples / Carpet)-
122. Ford DVM 0036-MA; SunscreenEN Resistance Test SunscreenEN Resistance Test –
123. Ford DVM 0039-MA; Insect Repellent ResistInsect Repellent Resist-
124. Ford DVM 0055-MA; Abrex Abrasion Test abrex Abrasion Test –
125. Ford E1; Waterford Plant Standard Test Method – Tensile, Elongation and Modulus
126. Ford E19; Waterford Factory Standard Test Method – Tear Resistance
127. Ford E 60; Waterford Plant Standard Test Method – Lap Shear Strength
128. Ford EN guineering Material Specification-WSS-M8P18-A1/ A2/ A3/ A4; Teileinterior Trim Fabrics for Covering Automotive Seat Cushions, Backrests and Trim Panels
129. Ford EN guineering Material Specification-WSS-M8P18-B1/ B2/ B3/ B4; Interior Upholstery Fabrics for Covering Automotive Seat Cushions, Backrests and Trim Panels
130. Ford ES D8VH-19A672-AA-§ IIIA; Biostatic Activity and Biostatic Concentration of Materials such as Adhesives, Foam, Expanded Rubber or Other Synthetic Polymeric Materials Used in an Air Conditioning Assembly -
131. Ford ES E97B-1011014-AA; Flammability Interior Trim 
132. Ford ESA M2P109 A2; Paint Quality, Color and Transparent Coating, Exterior Parts
133. Ford ESA M2P109-A2; Paint Quality, Color and Transparent Coating, Exterior Parts
134. Ford ESB M4D500 A; POLYPROPYLENE (PP) COPOLYMER, MEDIUM EFFECT,
135. Ford ESB M4D500-A; Polypropylene (PP) Copolymer, Medium Impact, Color Pigmented, Low Gloss, Indoor
136. Ford ESF M4D9 A; ACRYLIC RESIN ESF-M4D9
137. Ford ESF M4D9-A; Acrylic Resin Esf-M4D9
138. Ford AB BN001-01; Fade Resistance of Materials
139. Ford EU BN51-5;
Determination of Adhesion Strength of Laminate 
140. Ford EU BN8-1; Wear
141. Ford EU BP53-2; of your dyes
Painting Rubber with Water
142. Ford FLTM AN 101-01-(AN-101-01); Blood, Sweat and Water
Resistance of Stained Textiles / Resistance of Textiles to Bleeding - Sweat and Water Stains 
143. Ford FLTM AN 101-01-(sweating); Bleeding and Sweating Resistance of Textiles to Bleeding, Sweating and Water
Stain Resistance-
144. Ford FLTM AN 101-01-(water); Resistance to Bleeding and Sweating. Resistance of Textiles to Bleeding, Sweating and Water Stains-
145. Ford FLTM AN 101-01-(water stain); Resistance to Water Stains Resistance of Textiles to Bleeding, Sweating and Water Stains -
146. Ford FLTM BI 103-01; Salt Spray Resistance Test for Painted Panels and Parts (Gem. Astm B 117)-
147. Ford FLTM BI 104-01; Immersion for Painted Parts and Panel
test-
148. Ford FLTM BI 10401-(BI-10401); Immersion Test for Painted Parts and Panel / Immersion Test
149. Ford FLTM BI 104-02; Humidity Resistance
150. Ford FLTM BI 106-01-(BI-106-01); Paint Adhesion Test / Paint Adhesion Test
151. Ford FLTM BI 106-01-A; Coating Adhesion Test, Paint Adhesion Test, Method A (Scratch Test) Coating Adhesion Test (For Coatings and Paint to Steel, Aluminum, Galvanized Steel, Plastic or Other Surfaces), Method A (Scratch Test)-
152. Ford FLTM BI 106-01-B; Coating Adhesion Test, Paint Adhesion Test, Method B (Scribe Test) Coating Adhesion Test (For Coatings and Paint to Steel, Aluminum, Galvanized Steel, Plastic or Other Surfaces), Method B (Scribe Test)-
153. Ford FLTM BI 106-01-C; Coating Adhesion Test, Paint Adhesion Test, Method C (Parallel Scratch Test) Coating Adhesion Test (For Coatings and Paint to Steel, Aluminum, Galvanized Steel, Plastic or Other Surfaces), Method C (Parallel Scratch Test)-
154. Ford FLTM BI 106-01-D; Coating Adhesion Test, Paint Adhesion Test, Method D (Adhesion Test for Flexible Coatings) Coating Adhesion Test (For Coatings and Paint to Steel, Aluminum, Galvanized Steel, Plastic or Other Surfaces), Method D (Adhesion Test for Flexible Coatings)-
155 Ford FLTM BI 106-01-E; Coating Adhesion Test Method Coating Adhesion (For Coatings and Finishing on Steel, Aluminum, Galvanized Steel, Plastic or Other Surfaces), Method E (
Adhesion Test for Parting Lines, Radii and Edges)- 156. Ford FLTM BI 106-03; Hydrolysis Resistance of Painted Plastic Panels Hydrolysis Resistance-
157. Ford FLTM BI 107-05; Thermal Shock Test for Paint Adhesion
158. Ford FLTM BI 107-05-(BI-107-05); Thermal Shock Test for Paint Adhesion / Thermal Shock Test for Paint Adhesion
159. Ford FLTM BI 109-01; Visual Appearance AssessmentVisual Appearance Assessment-
160. Ford FLTM BI 109-03; Color Measurement Color Difference Evaluation of Textile Materials -
161. Ford FLTM BI 110-01; Gloss Measurement Measurement of the Gloss of Paint Panels-
162. Ford FLTM BI 11001-(BI-11001); Measuring the Gloss of Paint Panels / Measuring the Gloss
163. Ford FLTM BI 113-01; Water and Soap for Paint
Staining Water and Soap Staining Test - 164. Ford FLTM BI 113-02; Acid Staining ResistanceAcid Staining Resistance-
165. Ford FLTM BI 113-03; Synthetic Sweat
Stain ResistanceSynthetic Sweat Stain Resistance - 166. Ford FLTM BI 113-05; Acid Stain Resistance Acid on Painted Test Panels or Real Finished Parts
Resistance to Stains - 167. Ford FLTM BI 113-06;
Perspiration Resistance Test Method - 168. Ford FLTM BI 113-07; Synthetic Sweat
Dye ResistanceSynthetic Sweat Dye Resistance - 169. Ford FLTM BI 113-08; Sunscreen Lotion and Insect Repellent ResistanceSunscreen Lotion and Insect Repellent Resistance-
170. Ford FLTM BI 123-01; Corrosion Test Painted Sheet Metal Corrosion Test – Laboratory Simulated Arizona Test Floor Test –
171. Ford FLTM BI 12301-(BI-12301); Corrosion Test on Painted Metal Sheet / Painted Sheet Metal Corrosion Test
172. Ford FLTM BI 123-03; Component Corrosion Test Component Corrosion Test (Salt Spray Test)-
173. Ford FLTM BI 124-01; Filiform Corrosion Test
174. Ford FLTM BI 157-06; High Performance Stone Chip Resistance Test New Rating Scale
175. Ford FLTM BI 15706-(BI-15706); High Performance Stone Chip Test Resistance New Rating Scale / High Performance Test Chip Stone Resistance Test New Rating Scale
176. Ford FLTM BI 161-01; Determination of Mar Resistance in Automotive Paints
177. Ford FLTM BN 024-02; Flammability Test for Automotive Interior Materials-
178. Ford FLTM BN 102-01-A; Low Temperature Flexibilitypolymeric Materials, Low Temperature Resilience-
179. Ford FLTM BN 102-04; Flexible Fold Test
180. Ford FLTM BN 103-01; Resistance to Migration Staining and Inhibition of Coated Fabrics and Plastic Film
181. Ford FLTM BN 10301-(BN-10301); Resistance of Coated Fabrics and Plastic Film to Migration Dyeing and Blocking / Migration Dyeing and Blocking Resistance of Coated Fabrics and Plastic Film
Resistance to Blocking 182. Ford FLTM BN 105; Weight
183. Ford FLTM BN 105-01; Colour
184. Ford FLTM BN 105-03; Colour
185. Ford FLTM BN 106-01; Colour
186. Ford FLTM BN 106-02; Sewing FatigueSewing Fatigue Test-
187. Ford FLTM BN 107-01; Colour
188. Ford FLTM BN 107-01-(BN-107-01); Cracking Test / Cracking Test
189. Ford FLTM BN 108-01; Abrasion Resistance of Textile Fabrics (Stoll Quartermaster – Universal Wear Tester)Abrasion Resistance of Textile Fabrics – Inflated Diaphragm Method (Stoll Quartermaster – Universal Wear Tester)-
190. Ford FLTM BN 108-02; Abrasion Resistance – Taber Abrasive
191. Ford FLTM BN 10802-(BN-10802); Resistance to Abrasion-Taber Abrasives / Resistance to Abrasion-Taber Abrasives
192. Ford FLTM BN 108-03; Pilling Resistance Pilling Resistance -
193. Ford FLTM BN 108-04;
Friction Resistance Friction Resistance - 194. Ford FLTM BN 10804-(BN-10804); Friction Resistance / Friction Resistance
195. Ford FLTM BN 108-07; Snap Resistance (Taber) Snap Resistance of Trim Materials (Taber Abrasive)-
196. Ford FLTM BN 108-11; Snap Resistance (Knob Test) Snap Resistance – Knob Test –
197. Ford FLTM BN 108-13;
Scratch Resistance 198. Ford FLTM BN 10813-(BN-10813);
Scratch Resistance / Scratch Resistance 199. Ford FLTM BN 112-01; Stolle Wear
200. Ford FLTM BN 112-03; Degree of Soil Transfer to Leather and Polymeric Fabrics Degree of Soil Transfer´S-
201. Ford FLTM BN 112-08; Colour
202. Ford FLTM BN 112-12; Stain Resistant to Staining on Seat Fabrics
resistance-203. Ford FLTM BN 112-12-A-Stain Resistance Staining Resistance of Seat Fabrics; Method A
204. Ford FLTM BN 112-12-B-Stain-resistance-seat-fabric-painting-resistance; Method B
205. Ford FLTM BN 112-12-Method-A-Staining-Resistance-Setting-farbric-painting-resistance; Method A
206. Ford FLTM BN 113-01; Original Bond Strength
207. Ford FLTM BN 113-01-C; Loop Binding Strength
208. Ford FLTM BN 113-01-O; Original Bond Strength
209. Ford FLTM BN 113-01-S; Steamed Bond Strength
210. Ford FLTM BN 113-01-W; Wet Bond Strength
211. Ford FLTM BN 113-03; Thermal Aging (Constant Tensile Load)Extended Thermal Aging of Polymeric Coated Fabrics (Constant Tensile Load)-
212. Ford FLTM BN 115-07; Compression Set Polyurethane Foam Compression Set-
213. Ford FLTM BN 117-03-A-TEN-sile-gth-after-aging,-retained-TEN-sile-StrEN-gthevaluation-of-trim-materials-after-accelerated-exposure-in-controlled-radiation- water-cooled-xEN-on-arc-device; Method A: Post-Aging Tensile Strength, Retained Tensile Strength (Gt-Terminal)
214. Ford FLTM BN 117-03-B-Surface-Fiber-Distortion-Trim-materials-after-time-lapse-controlled-exposure evaluation-light-water-cooled-xEN-arc-device; Method B: Surface Fiber Distortion
215. Ford FLTM BN 119-01; Seam Strength of Textile Trim Materials
Determination- 216. Ford FLTM BN 121-01; Bond Strength Test Bond Strength Test – Interior Trim Decorations-
217. Ford FLTM BN 151-05; 180 Degree Peel Adhesive Strength Determination of 180 Degree Peel Adhesive Strength of Laminates -
218. Ford FLTM BN 155-01; Simulated Fingertip Abrasion Resistance Simulated Fingertip Abrasion Resistance (Abrex)-
219. Ford FLTM BN 156-01; Electrical Resistance Test (Surface Resistance)Electrical Resistance Test for Textile (Surface Resistance)-
220. Ford FLTM BN 157-02; Hardness (45° Cantilever Method) Determination of Leather Hardness (45° Console Method)-
221. Ford FLTM BN 158-01; Martindale Abrasion Test martindale Abrasion Test of Textile Fabrics -
222. Ford FLTM BO 101-01; Artificial Weathering Resistance
223. Ford FLTM BO 101-05; Determination of Fuel Resistance of Plastic Parts
224. Ford FLTM BO 10105-(BO-10105); Determination of Fuel Resistance of Plastic Parts
225. Ford FLTM BO 111-02; Indent and Recovery Test
226. Ford FLTM BO 113-03; Load Deflection Test
227. Ford FLTM BO 113-04; Rolling Sphere Fatigue Test for Arm Rest and Other Complex Trim Assemblies
228. Ford FLTM BO 115-01; Plastics – Artificial
Weathering Resistance 229. Ford FLTM BO 116-01; Controlled Radiation Water Cooled Xenon Arc Apparatus Of Interior Flooring Materials
Exposure at 230. Ford FLTM BO 116-03; Interior Trim – Fogging Features
231. Ford FLTM BO 11603-(BO-11603); Fogging / Fogging
232. Ford FLTM BO 127-03; Stress Cracking Test for Plastics Stress Cracking Test-
233. Ford FLTM BO 131-01; Identify and Evaluate Scents of Interior Decorative Materials / Components / Elements
234. Ford FLTM BO 13101-(BO-13101); Fragrance / Fragrance
235. Ford FLTM BO 131-01-/-SAE-J1351; Odor Evaluation
236. Ford FLTM BO 131-03; Indoor Odor Test
237. Ford FLTM BO 131-03-(BO-131-03); Nouveau Test D'Odeur / The New Odor Test
238. Ford FLTM BO 131-03-(Status-1); Indoor Odor Test Indoor Odor Test (Status 1, 23 °C)-
239. Ford FLTM BO 131-03-(Status-2); Indoor Odor Test Indoor Odor Test (Status 2, 40 °C)-
240. Ford FLTM BO 131-03-(Case-3); Indoor Odor Test Indoor Odor Test (Condition 3- 2 H at 65 °C)
241. Ford FLTM BO 131-03-(Case-4); Smell Test Internal Smell Test –
242. Ford FLTM BO 131-03-(Variante-1); Indoor Odor Test ford, Interior Odor Test –
243. Ford FLTM BO 131-03-(Variante-2); Indoor Odor Test ford, Interior Odor Test –
244. Ford FLTM BO 131-03-(Variante-3); Indoor Odor Test ford, Indoor Odor Test –
245. Ford FLTM BO 151-01; Low Temperature
Impact Resistance 246. Ford FLTM BO 15101-(BO-15101); Low Temperature
Impact Resistance / Low Temperature Impact Resistance 247. Ford FLTM BO 151-01-A; Ball Drop Test (rubber ball) Resistance to low temperature impact (Ball drop Test) Method A: Rubber Ball
248. Ford FLTM BO 151-01-B; Ball Drop Test (Steel Ball) Low Temperature Impact Resistance (Ball Drop Test) Method B: Steel Ball
249. Ford FLTM BO 155-01; Plastics and Tapes Resistance to PR Protective Waxes and Dewaxing Materials
250. Ford FLTM BO 160-04; Resistant Plastic Painted Parts High Pressure Cleaning Operations
251. Ford FLTM BO 16004-(BO-16004); Resistance of Painted Plastic Parts to High Pressure Cleaning / High Pressure Cleaning
252. Ford FLTM BO 162-01; Scratch and Distortion Resistance -
253. Ford FLTM BO 163-01; Teething Test (Impact Test) Teething Test for Metal Applied Internal Parts-
254. Ford FLTM BP 101-01; Rubber –
Degradation by Ozone 255. Ford FLTM BP 10101-(BP-10101); Ozone
Rubber Degradation by / Rubber Degradation by Ozone 256. Ford FLTM BP 106-03; Low Temperature Brittleness of Rubber and Rubber-Like Material
257. Ford FLTM BP 108-06; ComPR ession Coolant Hose Set
258. Ford FLTM BP 153-01; Surfaces with Polymer and Elastomer
Painting 259. Ford FLTM BP 153-01-B; Painting (with Water-Removable Components) of Surfaces with Polymers and Elastomers
Painting - Procedure B 260. Ford FLTM BQ 007-02; Acid Dissolution Test Decorative Aluminum Parts
261. Ford FLTM BQ 104-07; Environmental Test Cycles
262. Ford FLTM BQ 10407-(BQ-10407); Environmental Test Cycles / Environmental Test Cycles
263. Ford FLTM BU 101-06-A; Dynamic Shear Test of Pressure Sensitive Tapes (Method A)-
264. Ford FLTM BU 101-06-B; Static Shear Test Static Shear Test of Pressure Sensitive Tapes (Method B)-
265. Ford FLTM BU 151-01; Trim Adhesive Strength
266 Determination. Ford FLTM BV 101-07; Tensile Strength Test Lap-Shear Bonds
267. Ford FLTM BZ 156-01-A-(Photometry); Determination of formaldehyde emission Determination of formaldehyde, aldehyde and ketone emissions from non-metallic components, parts and materials in vehicle interiors Part A: Photometric Determination of Formaldehyde Emission
268. Ford FLTM BZ 156-01-B-(HPLC); Determination of aldehyde and ketone emission Determination of formaldehyde, aldehyde and ketone emissions originating from non-metallic components, parts and materials in vehicle interiors Part B: Determination of Aldehyde and Ketone Emission by High Performance Liquid Chromatography
269. Ford FLTM BZ 157-01-(VDA-277); Determination of Organic Emissions (Tvoc) Headspace Gas Chromatography (Tvoc) of Organic Emissions from Non-Metallic Materials in Vehicles -
Determination by 270. Ford FLTM EU BN 001-01; Fade Resistance of Materials
271. Ford FLTM MA 0135-(MA-0135); Insect Repellent Resistance
272. Ford IP 0105; Solar Load and Heat Age Resistance Display Panel – Solar Load and Heat Age Resistance (Ir Test – Infrared Radiation Heat Storage)
273. Ford IT 0815 (Ver.-10); Maximum Deflection and RotationMaximum Deflection and Rotation for Interior Floor Quality Feel -
274. Ford MA 0015; Stress Cracking Test Chemical Compatibility (Stress Cracking Test for Plastics)-
275. Ford MA 0018; Smell Test scent for Seat Belts-
276. Ford MA 0135; Insect Repellent Resistance
277. Ford MA 0139; Acid Staining Resistance
278. Ford OR 0329 (DVM 0048 OR); Solar Load ResistanceSolar Load Resistance – Exterior Decoration / Leaf CurtainEN (Ir-Test)-
279. Ford P 54B; Waterford plant standard test method – Viscosity – One Pack RTV Base
280. Ford S95UW 19B591-AA; Spec – Hos Asy A/C (Air Conditioning Hose Assembly)
281. Ford SH 0089 / SH 0103; Coefficient of Friction
Modified Mat Throw Slip Test (Static Friction)- 282. Ford ST 0035 Ver.14; Entry/Exit EnduranceSeat System Entry/Exit Endurance-
283. Ford ST 0035 Ver.-9; Entry/Exit EnduranceSeat System Entry/Exit Endurance-
284. Ford WSB M1P83-B1-4; Chromium Specification
285. Ford WSB M3G212-A; Tape, Low Density Epdm Foam, Pressure Sensitive, Supersoft
286. Ford WSD M2D381-A2; Thermoplastic Elastomer (Tpe), Polyolefin, Epdm Rubber Modified, Medium
Heat Resistant, Flame Retardant, 82 Durometer A Hardness 287. Ford WSD M96D14-A3; Hose, Epdm Rubber – Rayon or Polyester Reinforced, Engine Coolant Resistant Low Compression Kit
288. Ford WSD M9P8-A; Rubber Parts, Internal and External Performance
289. Ford WSF M11P8-A2; Adhesion Requirements, PR essure Sensitive Adhesive, Sponge Rubber, High Tack
290. Ford WSH M96D25-A2; Hose, A/C Refrigerant (Nylon Barrier) Resist Medium PR essure
291. Ford WSK M20416-A; Polyurethane (Pur) Foam, Molded High Elasticity
292. Ford WSK M2D416; Polyurethane (Pur) Foam, Molded High Elasticity
293. Ford WSK M2D419-A-§-3.4.5-§-3.4.5; Cold Flexibility, Cold FlexibilityCellular Elastomer, Gasket
294. Ford WSK M2D419-A-§-3.4.8.1-§-3.4.8.1; Leak Test After Heat Aging, Leak Test After Heat AgingCellular Elastomer, Gasket
295. Ford WSK M2D419-A-§-3.4.8.2-§-3.4.8.2; Leak Test after Polishing / Polishing and Heat Impact, Polishing – Polishing and Heat Leak Testing after Cellular Elastomer action, Gasket
296. Ford WSK M2D419-A-§-3.4.9-/-ABS-(based on FLTM-BO)-158-03)-§-3.4.9; Resistance of Plastics (Abs) to Stress Cracking by Gasket Material (According to Fltm Bo 158-03), Resistance of Plastics to Stress Cracking by Gasket Material Cellular Elastomer, Gasket
297. Ford WSK M2D419-A-§-3.4.9-/-PC-(based on FLTM-BO-158-03)-§-3.4.9; Resistance of Plastics (Pc) to Stress Cracking by Gasket Material (according to Fltm Bo 158-03), Resistance of Plastics to Stress Cracking by Gasket Material Cellular Elastomer, Gasket
298. Ford WSK M2D419-A-§-3.4.9-/- PMMA-(based on FLTM-BO-158-03)-§-3.4.9; Resistance of Plastics (Pmma) to Stress Cracking by Gasket Material (according to Fltm Bo 158-03), Resistance of Plastics to Stress Cracking by Gasket Material Cellular Elastomer, Gasket
299. Ford WSK M4D670-A; Polypropylene (PP) Copolymer. Medium High Potency MolDIN g Compound
300. Ford WSK M4D686-A; PolyPR opilen (Pp), Homopolymer
301. Ford WSK M4D732-A1; POLYPROPYLENE (PP) HOMOPOLYMER, 30% GLASS FIBER REINFORCED, MELTING FLOW RATE 0,5 – 4,0 - FORD WSS-M99P1111-A
FOR USE WITH THE 302. Ford WSK M4D745-A; ABS MoldIN g Compound, High Temperature Resistant
303. Ford WSK M4D752-A; Material Specification – Polyamide (Pa) 66 Heat Stabilized, Low Temperature Resistant, 30% Glass Fiber for Reinforcement, PR
Mixture for essing 304 . Ford WSK M98P6A-(WSK-M98P6A); FINISHED PARTS, PLASTICS, EXTERIOR - FORD WSS-M99P1111-A
IT WILL BE USED WITH THE 305. Ford WSK M98P9-A; Finished Parts, Plastics, Non-Decorative
306. Ford WSS M11P65-A2; Tape, Performance, PR Essure Sensitive Adhesive, Double Sided, Exterior, Body Side MoldDIN g
307. Ford WSS M15J14; Paint, Two Component Color Coating for Plastic, Interiore.G. Switches, Buttons, Console-
308. Ford WSS M15P20-B1; All Seat Cushions and Backs, Armrests, Headrests, Armrests and Seat
Polymeric Foam for Seating Application for Material Used in Other Structural Foam Trim Elements. - 309. Ford WSS M15P34; Performance, Applied Interior Trim Components Requirements for Interior Decorative Trim Components with Multi-Layer Construction. For Components Used in Instrument Panels and Interior Door Trim Panels. Including Wood, Film, Hydrographic and Aluminum Structures-
310. Ford WSS M15P34-D; Performance, Applied Interior Trim Components Requirements for Interior Decorative Trim Components with Multi-Layer Construction. For Components Used in Instrument Panels and Interior Door Trim Panels. Wood, Film, Hydrographic and Aluminum-
311 Structures Included. Ford WSS M15P44-A; Mop
Throw In The Tools, Carpeted- 312. Ford WSS M15P45-A; Flexible Cover Cover Material Using A Flexible Cover Cover Material For Performance, Dashboard Mounting, Dashboard Mounting. Also for Tu-Tone Cover Skin.-
313. Ford WSS M15P48-A; Seat Plastic Part / Assembly Performance Specification A Combination Of Various Materials To Provide Decorative And/or Functional Trim Assembly
Durability and Performance Requirements of All Visible and Invisible Plastic Seat Parts Used in Between - 314. Ford WSS M15P4-E; Interior Trim, Installation Performance Specification
315. Ford WSS M15P4E-(WSSM15P4E); Cahier Des Charges Ensemble D'Habillage Intérieur / Interior Trim, Assembly Performance Specification
316. Ford WSS M15P4-F; Hard Color Molding for Mounting Performance, Door Panels, Center and Top Consoles, Quarter Panels, Colored Plastic Moldings such as A-, B-, C- and D-, and Invisible Interior Trim Elements Internal Components Pillar Moldings, Rigid Dashboards, Dashboard Components and Garnish Molds.-
317. Ford WSS M1P83C1-(WSS-M1P83C1); ABS PC/ABS OR ELECTRO-COATED ON PC/ABS OR FILLED NYLON, GLOSSY OR LOW GLOSSY DECORATIVE COATING – INTERIOR- USED WITH FORD WSS-M99P1111-A 318
. Ford WSS M21P17; Corrosion PR protective Coating, Electrolytic Zinc Plate, Trivalent Chrome, Sealed and Sealed.
319. Ford WSS M21P17-B1-B5; Anti-Corrosion Coating
320. Ford WSS M21P36-A4-A6; Ball Stud PR selective Coating
321. Ford WSS M21P37-A1-A2; Anti-Corrosion Coating
322. Ford WSS M21P39-A1-A4; Anti-Corrosion Coating
323. Ford WSS M2P122-C1-C6; Corrosion
324. Ford WSS M2P170-B1-B7; Heat Resistance Coating
325. Ford WSS M2P177-B1-B2; Paint Performance
326. Ford WSS M2P177-C1-C3; Paint Performance
327. Ford WSS M2P178-A-A3; Paint Performance
328. Ford WSS M2P180-A; Paint Performance, Hard Surfaces, Exterior
329. Ford WSS M2P180-C; Paint Performance, Hard Surfaces, Exterior This Specification was Published to Describe the Paint Performance of Exterior Parts Visible After Installation and Weatherstrip's
Applicable to All Surfaces Except- 330. Ford WSS M2P188-A1; Paint Performance, Plastic Surfaces, Interior
331. Ford WSS M2P190-A; Resistance Artificial Weathering
332. Ford WSS M2P190-A1; Paint Performance, Visible Metallic Interior Parts
333. Ford WSS M4D585-C1:-Polycarbonate/Acrylonitrile-butadiEN-e-styrEN-blEN-d-(PC-+-ABS)-high-impact-molding compound; C2: Polycarbonate/Acrylonitrile Butadiene Styrene Mixture (Pc + Abs) Molding Compound for High Impact Thermoplastic Molding Compound Based on Polycarbonate (Pc) and Acrylonitrile Butadiene Styrene (Abs) Blend for Invisible or Painted Applications.
334. Ford WSS M4D941-A1; Polypropylene (PP) Homopolymer, 30% Glass Fiber/Mica Reinforced MoldIN g Compound, Lubricated and Heat Stabilized, Minimum 25% Recycled Content
335. Ford WSS M4D985-A3; Flexible
coverstock, aqueous moldable polyvinyl chloride (PVC) or polyvinyl chloride alloy, seamless instrument panel-336. Ford WSS M4P13-A; Anodized Aluminum Performance , Decorative Exterior Trim
337. Ford WSS M5P8-B1-B2; Lighting Metallization, Plastic and Metal Surfaces 338. Ford WSS M80J6-A; Clear Topcoat, UV Curable, Abrasion Resistant, Clear Plastic S.
339. Ford WSS M8P16-B; For Performance, Carpet, Upholstery and Upholstery Automotive Grade Carpet Installations, Flooring, Door Trims, Seat Backs in Open Load Bay Applications, and Molded or Other Fabricated Open Load Flooring.
340. Ford WSS M8P3; Performance, Flexible Polymeric Film For Interior Upholstery Coatings For Seats, Door Panels, Headliners And Other Applications
Quality.- 341. Ford WSS M98P13-C; Exterior Plastic Performance, Color Mold
342. Ford WSS M98P8-B1; Spray Glove Box Internal Parts with Inner Plastic Parts -
343. Ford WSS M99D63-A3; Thermoplastic Elastomer, Floor Covering,
Veined Shaped 344. Ford WSS M99P2222-C1-§-4.2; Determination of Hplc, Formaldehyde / Acraldehyde and Acetaldehyde After Extraction According to Formaldehyde / Acraldehyde and Acetaldehyde Fltm Bz 156-01Performance, Vehicle Indoor Quality – C1: Component requirements
345. Ford WSS M99P2222-D1; Performance, Vehicle Interior Quality Component and Allergy Requirements on All Products Supplied to Ford and Mounted in Cab Space and/or Air Conditioning System.-
346. Ford WSS M99P32-A; Performance, Acoustic and Thermal
Groups 347. Ford WSS M99P32-B-§ 3.7-§ 3.7; Moisture Absorption, Humidity
IntakePerformance, acoustic and thermal assemblies 348. Ford WSS M99P32-C; Performance, Acoustic and Thermal StructuresInterior, Luggage Compartment, Engine Compartment and Underbody Heat and/or Sound Absorbing Insulators-