Jaguar - Land Rover Standards Tests

Each standard below is a list of Jaguar LandRover approved tests. Ford etc. of the following standards. standards are quoted as LandRover standards when LandRover coupled with Ford.

Jaguar-Land Rover Standards

• ASTM B117; Standard Practice for Operating a Salt Sprayer (Fog)
• ASTM D5733; Strength, Tensile, Adhesion Strength and Elongation Measurement - Leather and Leather Products
• ASTM D1813; Dimensions - Length, Width, Thickness - Dimensions Measurement, Mass Measurement, Microscopy - Leather and Leather Products
• ASTM D2209; Strength, Tensile, Adhesion Strength and Elongation Measurement - Leather and Leather Products
• ASTM D2211; Strength, Tensile, Adhesion Strength and Elongation Measurement - Leather and Leather Products
• ASTM D610; Standard Practice for Evaluating Degree of Rust on Painted Steel Surfaces
• ASTM D6182; Visual Evaluation of Flexural Strength – Leather and Leather Products
• DBL 5306; Visual Evaluation of Flexural Strength – Leather and Leather Products
• DBL 5307; Flammability – Horizontal Combustion – Leather and Leather Products
• DBL 5310; Susceptibility to Contamination Cleanability – Visual Evaluation, Spectrophotometry – Leather and Leather Products
• DBL 5310 (7.5); Visual Evaluation of Heat Resistance – Leather and Leather Products
• DIN EN ISO 11644; Strength, Tensile, Adhesion Strength and Elongation Measurement - Leather and Leather Products
• DIN EN ISO 11664 – 4; Color Spectrophotometry – Leather and Leather Products
• DIN EN ISO 12947 – 1; Susceptibility to Contamination Cleanability – Visual Evaluation, Spectrophotometry – Leather and Leather Products
• DIN EN ISO 12947 – 2; Susceptibility to Contamination Cleanability – Visual Evaluation, Spectrophotometry – Leather and Leather Products
• DIN EN ISO 13934 – 1; Strength, Tensile, Adhesion Strength and Elongation Measurement - Leather and Leather Products
• DIN EN ISO 17076 – 1; Visual Evaluation of Abrasive, Abrasion Resistance – Leather and Leather Products
• DIN EN ISO 17076 – 2; Visual Evaluation of Abrasive, Abrasion Resistance – Leather and Leather Products
• DIN EN ISO 17186 – A; Dimensions - Length, Width, Thickness - Dimensions Measurement, Mass Measurement, Microscopy - Leather and Leather Products
• DIN EN ISO 23910; Strength, Tensile, Adhesion Strength and Elongation Measurement - Leather and Leather Products
• DIN EN ISO 2420; Dimensions - Length, Width, Thickness - Dimensions Measurement, Mass Measurement, Microscopy - Leather and Leather Products
• DIN EN ISO 2589; Dimensions - Length, Width, Thickness - Dimensions Measurement, Mass Measurement, Microscopy - Leather and Leather Products
• DIN EN ISO 3376; Strength, Tensile, Adhesion Strength and Elongation Measurement - Leather and Leather Products
• DIN EN ISO 3377 – 1; Strength, Tensile, Adhesion Strength and Elongation Measurement - Leather and Leather Products
• DIN EN ISO 5402; Visual Evaluation of Flexural Strength – Leather and Leather Products
• DIN EN ISO 9237; Air Permeability – Permeability Measurement – ​​Leather and Leather Products
• EN 228; Unleaded Oil
• EN 590; diesel fuel
• FLTM BI 113 – 01; Resistance to Liquid Spotting
• FLTM BI 113 – 02; Acid Staining Resistance
• FLTM BN 108 – 13; Mar and Scratch Resistance
• FLTM BO 104 – 01; Immersion in Water
• FLTM BO 151 – 01; Low Temperature Effect
• FLTM BO 155 – 01; Resistance to Transit Protection Coating and Removal Substances
• FLTM BO 160 – 04; High Pressure Cleaner
• FMVSS 106; Determining the Performance of Adhesives in Trim Applications
• FMVSS 302; Flammability – Horizontal Combustion – Leather and Leather Products
• Ford WSD – M1H615 – A; Fabric, Camelot, Pattern, Knitted
• Ford WSK – M3P1 – C; Engineering Material Specification – Phosphate Coating, Zinc
• Ford WSS M99P41 – A11; Engineering Material Specification – Label Performance, Stitched
• Ford WSS – M2P177 – C1; Engineering Material Specification Paint Performance Metal Surfaces Low Visibility 4 Weeks Durability
• Ford WSS – M2P177 – C2; Engineering Material Specification Paint Performance Metal Surfaces Medium Visibility 6 Weeks Strength
• Ford WSS – M2P177 – C3; Engineering Material Specification Paint Performance Metal Surfaces High Visibility 9 Weeks Strength
• Ford WSS – M97B44 – D; Cooler, Organic Additive Technology (Oats), Concentrate, For Passenger Cars and Light Trucks
• Ford WX100; End Specification
• Ford WX200; Performance Requirements for Iso Metric Threaded Fasteners with Dry Film Microencapsulated Adhesive Compound Applied to Threads
• ISO 105 – A02; Accelerated Environmental Aging, Thermal Aging, Resistance to UV and Internal and External Weathering
• ISO 105 – A03; Friction (Cracking) Color Fastness Visual Evaluation – Leather and Leather Products
• ISO 105 – X12; Friction (Cracking) Color Fastness Visual Evaluation – Leather and Leather Products
• ISO 11640; Friction (Cracking) Color Fastness Visual Evaluation – Leather and Leather Products
• ISO 261; Iso General Purpose Matrix Threads – General Plan
• ISO 3795; Flammability Test
• ISO 4042; Threaded Components – Electroplated Coatings
• ISO 6157-1; Fasteners - Surface Discontinuities - Bolts, Screws and Studs for General Requirements
• ISO 6157-2; Fasteners – Surface Discontinuities – Nuts
• ISO 6157-3; Fasteners - Surface Discontinuities - Bolts, Screws and Studs for Special Requirements
• ISO 8401; Review of Ductility Measurement Methods
• ISO 898 – 1; Mechanical Properties of Fasteners – Part 1 – Bolts, Screws and Studs.
• ISO 898-2; Mechanical Properties of Fasteners – Part 2 – Nuts with Load of Evidence Values
• ISO 965; Iso General Purpose Matrix Threads – Tolerances
• ISO/TS16949; Quality Management System Requirements
• JMS 20.14.03; Molded Fiberboards
• JNS 30.21.03; Resizable Stability
• LRLTM.30.CF.005; Light Fastness
• LRLTM.30.CF.006; Light Fastness
• LRLTM.30.CT.900; Moisture Resistance in Condensation Conditions
• LRLTM.30.EE.102; Accelerated Climate Test
• LRLTM.30.HA.104; Heat Aging Resistance
• LRLTM.30.MS.302; flammability
• LRLTM.30.ST.133; Extraction Dyeing
• PAPP PWT 7328; Friction (Cracking) Color Fastness Visual Evaluation – Leather and Leather Products
• PAPP PWT 7333; Reflection Spectrophotometry – Leather and Leather Products
• PLMJLR.00.0002; Drawing Frames
• PLMJLR.00.0003; revision
• PLMJLR.00.0004; Boom Stock List
• PLMJLR.00.0005; Drawing Classification
• PLMJLR.00.0006; Drawing Numbering
• PLMJLR.00.0007; Drawing Titles
• PLMJLR.00.0008; Scale
• PLMJLR.00.0009; Letters and Numbers
• PLMJLR.00.0010; Abbreviations and Symbols
• PLMJLR.00.0011; Line Contracts
• PLMJLR.00.0012; Multiple View Drawing
• PLMJLR.00.0013; section
• PLMJLR.00.0014; Symmetrical Parts
• PLMJLR.00.0016; Layout Requirements
• PLMJLR.00.0017; Vehicle Reference Planes
• PLMJLR.00.0018; Size and Tolerance
• PLMJLR.00.0021; Metric units
• PLMJLR.00.0023; Edges of Workpieces
• PLMJLR.00.0024; Digital Product Description
• PLMJLR.00.0026; captioned notes
• PLMJLR.00.0027; Custom controls
• PLMJLR.00.0028; Branding and Coding
• PLMJLR.00.0029; Polymeric Materials
• PLMJLR.00.0032; Electricity Distribution Systems
• PLMJLR.00.0033; Manufacturing Tools
• PLMJLR.00.0034; Production Facility Layout
• PLMJLR.00.0035; Custom Fastener Drawings
• PLMJLR.00.0036; Cad Standards
• PLMJLR.00.0038; Harness Design
• PV3909; Strength, Tensile, Adhesion Strength and Elongation Measurement - Leather and Leather Products
• PV3964; Friction (Cracking) Color Fastness Visual Evaluation – Leather and Leather Products
• PV3968; Susceptibility to Contamination Cleanability – Visual Evaluation, Spectrophotometry – Leather and Leather Products
• SAE 10W30; Engine oil
• SAE J1756; Avoiding Brittle
• SAE J1960; Accelerated Weathering
• SAE J2412; Fade Resistance Xenon Arc Uv Test – Weathering
• SAE J2527; Resistance to UV and Weathering – External
• SAE J323; Visual Evaluation of Flexural Strength – Leather and Leather Products
• SAE J365; Visual Evaluation of Abrasive, Abrasion Resistance – Leather and Leather Products
• SAE J400; Stone Chip Resistance
• SAE J948; Visual Evaluation of Abrasive, Abrasion Resistance – Leather and Leather Products
• STJLA.50.5151; Performance Requirements for Chrome Coated Polymers.
• STJLR.01.5049; Self Piercing Riveting
• STJLR.50.5002; Aluminum Pretreatment
• STJLR.50.5005; Aluminum Alloy, Structural Sheet, Not Heat Treatable
• STJLR.50.5042; Coating Aluminum Silicone
• STJLR.50.5043 – A1 /A2; Corrosion Protective Coating, Zinc - Rich Inorganic Basecoat, Oily Aluminum - Rich Organic Topcoat
• STJLR.50.5044; Covering. Zinc on Ferrous Surfaces
• STJLR.50.5045 – A3; Corrosion Protective Coating, Zinc-Rich Inorganic Basecoat, Oily Inorganic Topcoat
• STJLR.50.5046 – A3; Electrolytic Zinc Plated, Chromated, Leaked and Sealed, Integral Torque Control Lubricant
• STJLR.50.5046 – A4; Mechanical Zinc Plated, Chromated, Leaked and Sealed, Integral Torque Control Lubricant
• STJLR.50.5047 – A1; Anti-Corrosion Coating – Zinc/Aluminum Basecoat, Oil Sealant
• STJLR.50.5048 – A 1/A2; Anti-Corrosion Coating – Zinc Plate, Trivalent Chromate, Lubricated Aluminum – Rich Organic Topcoat
• STJLR.50.5049 – A1; Anti-Corrosion Coating – Electrolytic Zinc Iron Alloy, Waterborne Topcoat Black with Trivalent Chromate
• STJLR.50.5050 – A1 /A2; Anti-Corrosion Coating – Zinc/Aluminum Integrally Lubricated Inorganic Coating 2 – Coats/3 – Coats
• STJLR.50.5051 – A1 /A2; Anti-Corrosion Coating – Applied to Spring Band Hose Clamps
• STJLR.50.5052 – A2; Anti-Corrosion Coating – Zinc Rich Inorganic Basecoat, Organic Topcoat, Black Color
• STJLR.50.5053; Lubrication for Phosphate Coatings
• STJLR.50.5054; Material Specification for Corrosion Protective Coating – Zinc Nickel Alloy, Trivalent Passive Plus Sealer or Topcoat – Silver or Black
• STJLR.50.5054 – A1; Material Specification for Corrosion Protective Coating – Zinc Nickel Alloy, Trivalent Passive Plus Sealer or Topcoat – Silver or Black – Silver
• STJLR.50.5054 – A2; Material Specification for Corrosion Protective Coating – Zinc Nickel Alloy, Trivalent Passive Plus Sealer or Topcoat – Silver or Black – Black
• STJLR.50.5054 – A3; Material Specification for Corrosion Protective Coating – Zinc Nickel Alloy, Trivalent Passive Plus Sealer or Topcoat – Silver or Black – Silver
• STJLR.50.5060; Metal Plate Lubricant
• STJLR.50.5061; Sheet Metal Properties and Thickness Tolerances
• STJLR.50.5111; Aluminum Alloy, Structural Sheet, Not Heat Treatable
• STJLR.50.5112; Control of Heat Treatment Processes and Auxiliary Equipment
• STJLR.50.5151; Performance Requirements for Chrome Coated Polymers
• STJLR.50.5174; High Strength Low Alloy Steel, Cold Rolled
• STJLR.50.5175; Sheet Metal, Cold Rolled, Dual Phase
• STJLR.50.5176; Boron Sheet, High Strength
• STJLR.50.5352; Fusion Welding of Low Carbon, Carbon and Alloy Steels
• STJLR.51.5006; Determining the Performance of Adhesives in Trim Applications
• STJLR.51.5181; Self Adhesive Tape Systems
• STJLR.51.5204; Material Performance – Chrome Tanned and Chrome – Free Leather
• STJLR.51.5223; Temporary Protection Systems for Trim Components
• STJLR.51.5224; Dashboard Mounting Performance – Including Flexible Cover Linings
• STJLR.51.5225; Performance Specification – Interior Trim Groups
• STJLR.51.5226; Standard Requirements for Production Materials
• STJLR.51.5227; Material Control Of Black And Gray Box Items.
• STJLR.51.5229; Environmental Quality Requirements for Ingredient and Components
• STJLR.51.5230; Material Performance – Flock Coatings
• STJLR.51.5231; Performance Requirements of Rubber Parts
• STJLR.51.5241; Performance Requirements of Painted Parts
• STJLR.51.5241/95; Performance Requirements of Exterior Painted Parts
• STJLR.51.5242; Pain and Polish Performance – Indoor
• STJLR.51.5245; Corrosion Protection Coating – Organic Type
• STJLR.51.5262; Performance Requirements for Undecorated Plastics
• STJLR.51.5301; Performance Requirements of Rubber Parts
• STJLR.51.5302; Requirements of Brake Hoses
• STJLR.51.5391; Lubricant Applied, Torque/Compression Force Control
• STJLR.51.5392; Subsequent Processes for Fastener Surface Treatments
• STJLR.60.5003; Jlr Standard and Special Fastener Control Procedure
• STJLR.60.5020.A900; Size Requirements for Hexagon, Flange Hexagonal, and Hex Bolt and Washer Assemblies
• STJLR.60.5020.D950; Material and Performance Requirements for Intermittent Threading Screws
• STJLR.60.5020.D951; Mechanical and Performance Requirements of Hardened Screw Screws
• STJLR.60.5020.D952; Mechanical and Performance Requirements of Induction Hardened End-Hardened and Carbon-Restored Screw Screws.
• STJLR.60.5020.D953; Material and Performance of Screws Used in Plastic
• STJLR.60.5020.E900; Size Requirements for Current Torque Type Steel Metric Hex and Hex Flange Nuts
• STJLR.60.5020.E950; Prevailing Torque - Type Steel Hex Nuts and Hex Flange Nuts
• STJLR.60.5020.E953; Mechanical and Performance Requirements for Single Threaded Spring Nuts
• STJLR.60.5020.X100; Fastener – Coating Properties
• STJLR.60.5020.X200; Threaded Fasteners with Dry Film Microencapsulated Adhesive Applied to Teeth
• STJLR.60.5020.X201; Threaded Fasteners with Sealant Applied to Threads
• STJLR.60.5020.Z101; Steel Isometric Threaded Fasteners Torque/Compression Force Performance
• STJLR.60.5020 – A900; Dimensional Requirements for Hex and Flange Hex Bolts and Screws and Hex Screw and Washer Sets
• STJLR.60.5020 – A950; Mechanical Properties of Nuts with Determined Evidence Load Values
• STJLR.60.5020 – X100; Fasteners – Finishing Properties.
• STJLR.601.5005; Burr Conditional on Stamped Parts
• STJLR.99,9999; Restricted Substance Management Standard
• STJLR – 51 – 5225; Performance Specification – Interior Trim Groups
• 52064 TL; Dimensions - Length, Width, Thickness - Dimensions Measurement, Mass Measurement, Microscopy - Leather and Leather Products
• 52064 TL (6.6); Visual Evaluation of Heat Resistance – Leather and Leather Products
• TPJLR.00.047; Strength and Endurance Vibration Requirements
• TPJLR.00.087; Assembly and Assembly of Bolted Joints
• TPJLR.01.032; Input/Output and Squirm Endurance Test
• TPJLR.01.072; Sunglasses Storage Door – Usage Loads
• TPJLR.03.319; Chemical Resistance Test to Sub-Hood Environment
• TPJLR.03.2323; Intake Manifold Assembly Supplier Tests
• TPJLR.18.001; Harness Grommets
• TPJLR.51.5223; Temporary Protection Systems for Trim Components
• TPJLR.51.5224; Dashboard Mounting Performance – Including Flexible Cover Linings
• TPJLR.51.5242; Paint and Polish Performance – Indoor
• TPJLR.52.001; Wear resistance
• TPJLR.52.002; Mar Resistance
• TPJLR.52.003; Wear resistance
• TPJLR.52.004; Scratch Resistance
• TPJLR.52.009; Wear resistance
• TPJLR.52.056; Foam Adhesion to Flexible and Hard Surfaces (Scraper Method)
• TPJLR.52.058; Strength, Tensile, Adhesion Strength and Elongation Measurement - Leather and Leather Products
• TPJLR.52.061; Paint Adhesion Test Method
• TPJLR.52.104; Determination of Voc and Carbonyl Emissions for Interior Flooring Materials
• TPJLR.52.107; Determination of Voc'S from Internal Components
• TPJLR.52.153; Suncream Opposite Interior Painted Trim Resistance
• TPJLR.52.154; Determination of Fuel Resistance of Plastic Components
• TPJLR.52.155; Liquid Spotting on Automotive Trim
• TPJLR.52.156; Sweating Resistance
• TPJLR.52.160; Resistance to External Transit Protection Materials
• TPJLR.52.161; Acid Staining Resistance
• TPJLR.52.164; Determination of the Resistance of Exterior Painted Surfaces to Biological Pollution
• TPJLR.52.201; Contamination and Cleanability of Trim Materials
• TPJLR.52.202; Pollution and Cleanability
• TPJLR.52.203; Resistance to White Mark
• TPJLR.52.205; Sensitivity of Trim Material to Amine Dyeing
• TPJLR.52.205 Method A; Susceptibility to Amine Staining
• TPJLR.52.205 Method B; B – Sensitivity to Amine Staining
• TPJLR.52.205 Method C; Susceptibility to Amine Staining
• TPJLR.52.209; Resistance to Migration Spotting
• TPJLR.52.210; Susceptibility to Contamination Cleanability – Visual Evaluation, Spectrophotometry – Leather and Leather Products
• TPJLR.52.211; Susceptibility to Contamination Cleanability – Visual Evaluation, Spectrophotometry – Leather and Leather Products
• TPJLR.52.212; Susceptibility to Contamination Cleanability – Visual Evaluation, Spectrophotometry – Leather and Leather Products
• TPJLR.52.252; Resistance to Neutral Salt Spray Corrosion Test
• TPJLR.52.301; Dimensional Stability Under Dry Heat
• TPJLR.52.302; Determination of Elongation and Stress Set
• TPJLR.52.351; Moisture Resistance – General
• TPJLR.52.352; Resistance to Heat Aging – General
• TPJLR.52.353; Accelerated Environmental Aging Cycling
• TPJLR.52.356; High Temperature and Humidity Aging (Climate Cycle)
• TPJLR.52.360; Accelerated Environmental Aging for Adhesives Used in Trim Application
• TPJLR.52.413; Visual Evaluation of Flexural Strength – Leather and Leather Products
• TPJLR.52.414; sewing fatigue
• TPJLR.52.419; Load Deviation and Loss of Load
• TPJLR.52.420; Mechanical Shock Test Requirements
• TPJLR.52.423; Determination of Surface Fiber Deterioration After Ultraviolet Radiation
• TPJLR.52.425; Strength, Tensile, Adhesion Strength and Elongation Measurement - Leather and Leather Products
• TPJLR.52.452; Bending Resistance
• TPJLR.52.455; Accelerated Environmental Cycling
• TPJLR.52.458; Smell Test
• TPJLR.52.551; Sensitivity of Trim Material to Amine Dyeing
• TPJLR.52.552; Extraction Painting of Organic and Decorative Topcoats and Trim Materials
• TPJLR.52.554; Prohesion Test for Corrosion Resistance
• TPJLR.52.561; Resistance of Painted Exterior Parts to High Pressure Cleaning Processes
• TPJLR.52.564; Water Immersion Test for Painted Parts and Panels
• TPJLR.52.565; Pencil Hardness of Paint Films
• TPJLR.52.701; Micro Cracking
• TPJLR.52.705; Hardness Force Measurement, Dimension Measurement - Leather And Leather Products
• TPJLR.52.709 Method A; Ball Drop Test (Method A Rubber Ball)
• TPJLR.52.709 Method B; Ball Drop Test (Method B Steel Ball)
• TPJLR.52.712; Resistance to Interference
• TPJLR.52.714; moisture absorption
• TPJLR – 52 – 002; Mar Resistance
• TPJLR – 52 – 003; Wear resistance
• TPJLR – 52 – 104; Determination of Voc and Carbonyl Emissions for Interior Flooring Materials
• TPJLR – 52 – 351; Moisture Resistance
• TPJLR – 52 – 352; Heat Aging Resistance
• TPJLR – 52 – 353; Accelerated Environmental Cycling
• TPJLR – 52 – 458; Smell Test
• VDA 227; total you
• VDA 230 – 209; Hardness Force Measurement, Dimension Measurement - Leather And Leather Products
• VDA 230 – 212; Susceptibility to Contamination Cleanability – Visual Evaluation, Spectrophotometry – Leather and Leather Products
• VDA 277; Determination of Organic Emission from Vehicle Interior Non-Metallic Materials

In addition to the above standards, please consult separately for testing items not listed, including the following standards. 

• ASTM B368; ASTM D1000; ASTM D1056; ASTM D1984; ASTM D2000; ASTM D257; ASTM D3574; ASTM D471; ASTM E34
• BS 2011 ; BS 2869 Part 1 ; BS 5350 - C1 ; BS 5350 - C5 ; BS 5350 - C7 ; BS 5350-H3; BS7070; BS EN ISO 6892 – 1
• CADJLR.02.02 ; CAOJLR.02.02
• DIN EN 60068 - 2 - 27
• EN 10327; EN 2280; EN ISO 6507; EN228 SAE J200
• ES-6G91-1N260-AA; ES-6H52-00001-A; ES-AW93-09000-AA; ES 2W93 F00004
• AB 2066
• FAF03 – 117 – 01
• FLTM BI 104 - 01; FLTM BI 106 - 01; FLTM BI 109 - 01; FLTM BI 110 - 01; FLTM BI 117 - 01; FLTM BI 151 - 01; FLTM BI 157 - 06; FLTM BO 101 - 05; FLTM BO 108 - 13; Ford E-4; FORD WSS - M99P1111 - A
• ISO 105 - E01; ISO 105 - E07; ISO 1431-1; ISO 1431-1; ISO 16232; ISO 2759; ISO 4925; ISO 60093; ISO 6892 - 1; ISO3795; ISO60093
• leg 60093
• SAE J 2412; SAE J 2527; SAE J 948; SAE J1401; SAE J1703; SAE J1873; SAE J1956; SAE J1976; SAE J200 ; SAE J315; SAE J949; SAE/USCAR5
• STJLR 50.5041 Z100H; STJLR.50.5041; STJLR.50.5141; STJLR.50.5172 MS2; STJLR.51.5061; STJLR.51.5101; STJLR.51.5141;  STJLR.51.5142; STJLR.51.5143; STJLR.51.5182; STJLR.51.5202; STJLR.51.5203; 
  STJLR.51.5221; STJLR.51.5228; STJLR.51.5232;  STJLR.51.5233; STJLR.51.5281; STJLR.51.5303; STJLR.51.5321; STJLR.51.5322; 
  STJLR.51.5341;STJLR.51.5361; STJLR.51.5362;  STJLR.51.5363; STJLR.51.5364; STJLR.51.5381; STJLR.515006; STJLR50.5172 MS3;
• TOXPROOF Criteria Catalog-2 PIG S 0051
• TPJLR.52.055; TPJLR.52.094; TPJLR.52.109; TPJLR.52.152; TPJLR.52.206; 
  TPJLR.52.251; TPJLR.52.303; TPJLR.52.411; TPJLR.52.422;  TPJLR.52.655; TPJLR.52.708; TPJLR52.253